This Subcontract opportunity from North Carolina was posted on September 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Aluminum Pipe Connecting Band Supplier

Closed

State & Local

Submission Closed09/25/2026, 03:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332611

New

SLED

Specialized Material Supply (Fasteners & Gaskets)

NYS OGS Design & Construction - Construction Contractors

POSTED

DEADLINE

Helical Torsion Spring ManufacturerThis subcontract involves the manufacture of 325 helical torsion springs for the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating the springs using specialized winding machinery in strict accordance with technical drawings 78286 70209-22723 Rev B and 98752 200415485 Rev E. Performance will take place in Greensboro, North Carolina. The selected provider must hold US/Canada Joint Certification Program certification and ensure all materials are free of asbestos and mercury. Additionally, the project mandates full compliance with the Berry Amendment and the Buy American Act. Responses for this requirement are due by November 20, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Slotted Hexagon NutsThis subcontract involves the manufacture and supply of 5,270 Slotted Hexagon Nuts (NSN: 5310008421488) for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All units must be produced according to specification MS35692B(2), with strict adherence to MIL-STD-130N for marking and MIL-STD-129 for shipping. The final delivery is designated for DLA Distribution DDSP New Cumberland. The contract mandates rigorous quality and traceability standards, specifically requiring NAVAIR Aircraft Launch and Recovery Equipment traceability and compliance with RQ001 quality requirements. Due to the critical nature of the application, source inspection is required. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Machine Bolts (NSN 5306-00-966-2427)This subcontract involves the manufacture and supply of 443 machine bolts for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The bolts must strictly adhere to NSN 5306-00-966-2427 requirements and Military Part Standards. Quality assurance is maintained through sampling performed per MIL-STD-1916 or ASQ H1331, while packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The contract falls under NAICS code 332611 and specifies delivery terms as FOB Origin. Performance of the contract is centered in Tracy, California. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 8, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Shoulder Screw Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 371 shoulder screws, identified by NSN 5305017223405, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. All hardware must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. Strict adherence to technical and quality standards is required, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. Additionally, the provider must maintain a quality management system compliant with either SAE AS9003 or ISO 9001. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Continuous Thread Stud SupplyThis subcontract involves the manufacture or procurement of five critical application continuous thread studs for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The deliverables must strictly adhere to Technical Drawing TDP Rev A Gen 2 and Basic Drawing NR 53711 6985434 Revision A, ensuring they match NSN 5307-01-652-8969 and Part Piece Number 566-6985434-29. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332611. A critical requirement of this agreement is full compliance with DFARS 252.204-7012 and NIST SP 800-171 cybersecurity standards to ensure the protection of sensitive information.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Nickel-Copper Alloy Wire Manufacturer/SupplierThis subcontract involves the manufacture and supply of non-electrical nickel-copper alloy wire for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Nuclear Reactor Program. The supplier is responsible for producing Class A alloy wire using cold drawing and annealing processes, ensuring each spool meets a diameter of 0.064 inches and a length of 407 feet. A total delivery of 230,400 spools is required, with a strict quality standard requiring a minimum tensile strength of 70,000 lb/sq inch verified through precision measurement and testing equipment. The project is categorized under NAICS code 332611 and will be performed in New Cumberland. Interested parties must adhere to the timeline established by the posting date of November 6, 2026, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Socket Head Cap ScrewsThis subcontract involves the procurement of 204 socket head cap screws under NSN 5305006302480 to support prime contractors for the DLA Weapons Support ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing screws that strictly adhere to NSN technical specifications, utilizing MIL-STD-2073-1E for packaging and MIL-STD-1916 or ASQ H1331 for sampling methods. Compliance with DFARS 252.225-7001 is mandatory, and all deliveries must include a Certificate of Quality Compliance and a Certificate of Conformance. The contract falls under NAICS code 332611 and is managed by the Department of Defense. Performance for this requirement is located in Cherry Point, North Carolina. Interested parties must respond by November 13, 2026, to meet the procurement timeline established by the agency.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Self-Locking Nut SupplyThis subcontract involves the supply of 54 specialized self-locking nuts with extended washers for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing components that strictly adhere to NSN 5310-01-012-9791 specifications. Performance of the contract will take place in New Cumberland, Pennsylvania. Strict compliance with military and industry standards is required for the fulfillment of this order. Products must be packaged according to ASTM D3951, marked and labeled per MIL-STD-129, and palletized in accordance with RP001 DLA Packaging Requirements. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Windshield Wiper Parts KitsThis subcontract with the DLA Weapons Support Fluid Handling Division involves the assembly and supply of 83 Windshield Wiper Parts Kits under NSN 2090014947227. The contractor is responsible for assembling components into completed kits while strictly adhering to RP001 and MIL-STD-2073-1 Appendix D for packaging and MIL-STD-129 for marking. Additionally, the contractor must certify that no mercury compounds are intentionally added to the products. Compliance requirements include adherence to the Buy American and Balance of Payments Program and NIST SP 800-171 cybersecurity standards. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 332611. Responses to this solicitation are due by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Metal Tube Assembly Fabrication and SupplyThis subcontract involves the manufacture and supply of 13 metal tube assemblies for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The contractor is responsible for fabricating these assemblies in strict accordance with the technical and quality requirements specified by the R or I numbers found in the DLA Master List. A critical environmental compliance mandate requires that no Class I Ozone Depleting Chemicals be used or incorporated into any of the delivered items. The project is categorized under NAICS code 332611 and will be performed in Texarkana, Texas. Interested parties must adhere to the timeline established by the posting date of November 6, 2026, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Machine Bolt Manufacturing and SupplyThis subcontract involves the manufacture and supply of 297 machine bolts for prime contractors supporting DLA supply contracts. The selected provider must source or manufacture the hardware according to specific NSN specifications, with a strict prohibition on the use of additive manufacturing processes. All deliverables must meet DLA quality standards for hardware and be delivered to the DLA Distribution DDSP New Cumberland Facility. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division. Compliance with the First Destination Transportation program requirements is mandatory for the completion of the shipment. The project falls under NAICS code 332611, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

5 days ago

DEADLINE

in 2 days

AI Contract Overview

This subcontract agreement establishes the supply and delivery of aluminum connecting bands for prime contractors working on Harnett County Maintenance projects. The supplier must provide bands compatible with 18, 24, 30, 36, and 48 inch corrugated aluminum pipes, ensuring all products adhere to the North Carolina Department of Transportation specifications for pipe accessories. The contract is managed by the North Carolina Department of Transportation and requires strict compliance with agency insurance requirements. Additionally, employers with more than 25 employees must comply with E-Verify regulations. The solicitation was posted on September 15, 2026, with a response deadline of September 25, 2026.

General Info

Subcontract for supplying NCDOT specified aluminum connecting bands for Harnett County projects.

Agency

North Carolina → Department of Transportation

NAICS

332611 - Spring (Heavy Gauge) Manufacturing

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 54-DM-39334.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Invitation for Bid #: 54-DM-39334

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 15

subcontract

Response DeadlineSep 25

Deadline has passed

Submission Closed

09/25/2026, 03:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNorth Carolina → Department of Transportation

ContactsNo contacts available

OfficeN/A

Organization / AgencyNorth Carolina → Department of Transportation

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies and delivers aluminum connecting bands for prime contractors on Harnett County Maintenance projects. Provides bands compatible with 18", 24", 30", 36", and 48" corrugated aluminum pipes per NCDOT specifications for pipe accessories. Requires compliance with Agency Insurance Requirements and E-Verify for employers with 25+ employees. Delivers aluminum connecting bands.