Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Energy was posted on January 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Aluminum Water Tanks and Accessories

Closed
INL-26-017Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332420
New
SLED
2026 Fuel Tanks
Solicitation # 2026-31
The Washington County Board of Commissioners in Georgia is soliciting bids for a complete, code-compliant bulk fuel storage and dispensing system for an on-site facility. The project requires the supply and delivery of two 10,000-gallon UL-2085 fire-rated, double-wall aboveground storage tanks, one for gasoline and one for ultra-low-sulfur diesel. The scope of work includes all necessary piping, fittings, valves, emergency shutoffs, and a keyed fuel control and tracking system featuring software and reporting capabilities. All equipment must be new, include manufacturer certifications, and comply with NFPA 30/30A, EPA 40 CFR Part 112 (SPCC), and local fire codes, with meters being NTEP certified for commercial use. Bids must be submitted in writing by December 14, 2026, and will be evaluated primarily on total evaluated price, with high importance placed on delivery lead time and medium importance on warranty, service, and vendor experience. Contractors must provide a minimum 60-day quote validity period and evidence of three recent comparable installations. Required documentation includes an E-Verify Affidavit, a SAVE Affidavit, and a Certificate of Insurance listing the Washington County BOC as an additional insured, with minimum liability limits of $1,000,000 per occurrence. The contract allows the County to terminate the agreement with 10 days' written notice and requires the contractor to repair or replace defective workmanship for one year following final completion.
Washington County Board of Commissioners

POSTED

4 days ago

DEADLINE

in 27 days
NAICS: 332420
New
Federal
Storage Tank AND SUPPLIES - FORT BRAGG
Solicitation # W911S227U0178
Solicitation W911S227U0178 is a Request for Quotation for the procurement of new commercial equipment and supplies to support Fort Bragg. This acquisition is a Total Small Business Set-Aside and requires the delivery of a 6000 gallon Norwesco white vertical storage tank, along with associated hardware including a Hayward bulkhead tank fitting, Kuriyama acid/chemical and DEF UHMWPE tubing, AMT pumps, and various stainless steel pipe nipples and fittings. The government will award the contract to the responsible offeror whose proposal is most advantageous based on price and technical evaluations. Only new equipment is acceptable, and used or remanufactured products will be rejected. Offers must be submitted exclusively through the PIEE Solicitation module and must include technical and price proposals, as well as a completed certification of the country of origin. While the solicitation is brand name or equal, any proposed equal products must meet all specified salient physical, functional, or performance characteristics and be supported by descriptive literature. Delivery is required on an F.O.B. destination basis, with a preferred delivery timeline of within 30 days. Compliance with various federal regulations is mandatory, including Buy American standards, sustainable product requirements, and specific cybersecurity and telecommunications prohibitions.
W6QM Micc-Ft Drum

POSTED

4 days ago

DEADLINE

in 2 days

General Info

NAICS

332420 - Metal Tank (Heavy Gauge) Manufacturing

Place of Performance

Idaho Falls, ID, 83415, USA

Set-Aside

NONE

Documents

1
PDF, Low priorityrfi
Low

Read the document

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Forging Tooling ProductionOpen now, due in 7 days
  • 2026 Fuel TanksOpen now, due in 28 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Battelle Energy Alliance–doe Cntr
Contacts1 person available
OfficeIdaho Falls, ID, 83415, USA

Full Description

Show more

I. INTRODUCTION
Battelle Energy Alliance, LLC (BEA), Management & Operating Contractor of the U.S. Department of Energy (DOE) owned Idaho National Laboratory (INL), is seeking an Expression of Interest (EOI) from prospective offerors to support the fabrication and delivery of Aluminum Water Tanks.


II. REQUEST
BEA is seeking qualified firms to compete for the fabrication and delivery of aluminum water tanks
. Qualifications of prospective offerors include:
• Experience with the fabrication and welding of Aluminum.
• Experience with the fabrication of water retaining vessels
• Experience working with BEA
As determined by BEA, responders to this EOI may receive a Request for Proposal (RFP) that may require detailed technical and price proposals be provided for evaluation and ranking under a source selection process. Based on the responses to this EOI, BEA will determine the source selection process.


III. WORK DESCRIPTION
A. Procurement of materials and accessories, to fabricate 23 aluminum water tanks; in the following quantities and approximate sizes.
B. Qty. 14 @ - 65” W x 49” L x 199” H
C. Qty. 4 @ - 56.75” W x 49” L x 199” H
D. Qty. 5 @ - 49” W x 49” L x 199” H
E. Delivery and offloading of Water Tanks at INL site
WORK NOT INCLUDED
A. Installation and filling of Water Tanks at INL.


IV. APPLICABLE CODES, PROCEDURES, AND REFERENCES
A. AWS D1.2, Latest Addition


V. DESIGN REQUIREMENTS
A. Designs by Others.


VI. SUBMITTAL
Interested offerors are requested to provide expressions of interest to the undersigned by close-of business on Jan 16, 2026. Included must be sufficient written information confirming the responder’s qualifications that addresses each of the following criteria:
• Estimated maximum lead time for required materials.
• Estimated manufacturing duration for each size of tank.
• Estimated manufacturing duration for all 23 tanks.
• Experience with aluminum fabrication and welding
• Experience with fabrication of water tanks.
• Capability to meet applicable safety, regulatory and code compliance as listed.
• Agreement to have a quality program that is consistent with the guidelines of ISO 9001-2015 and
ANSI/ASQC C1-1996 General Requirements for a Quality Program
Note that responses must be no more than 20 pages in length. Only potentially qualified offerors, as
determined by BEA, will receive the RFP for the project.
If you have questions, need additional information, or need to speak with a BEA Point of Contact, please
contact Chase Egbert at Sign up to see this detail or via email at Sign up to see this detail Technical questions must
be submitted in writing via email.

More opportunities from Department Of Energy → Battelle Energy Alliance–doe Cntr

Same awarding agency

NAICS: 335910
New
Federal
Long-Duration Energy Storage (LDES) Battery System
Solicitation # INL-26-050
Idaho National Laboratory (INL) and Argonne National Laboratory (ANL) are seeking Expressions of Interest (EOI) for non-lithium, rechargeable electrochemical long-duration energy storage (LDES) battery systems to undergo benchmark performance testing. The requirement includes two module-scale systems (100-150 kWh, 10-15 kW) to be delivered to INL and one full-scale system (1000-1500 kWh, 100-150 kW) to be delivered to ANL. All systems must support at least 10 hours of continuous discharge, operate between 0 to 50 degrees Celsius, and possess a minimum field lifetime of 15 years. Technical specifications require a 3-phase 480 VAC interface, an isolated 800-1500 VDC export, and support for SCADA protocols such as Modbus TCP/IP, DNP3, and IEC 61850. Systems must comply with NFPA 855, UL 9540/9540A, and NEC/IEEE standards, and vendors must provide comprehensive hazard assessments and emergency response instructions. The delivery timeline specifies that modules should arrive at INL approximately three months after final design acceptance, while the full-scale system is due at ANL within six months. This EOI process is a preliminary step to identify qualified vendors for a future Request for Proposal (RFP). Interested parties must submit a consolidated PDF or Word document including technical descriptions, physical characteristics, safety documentation, indicative pricing, and a project schedule to Chase Egbert by December 8, 2026.
Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 22 days
View Details
NAICS: 334519
Federal
ATR Plant Protection System (PPS) Seismic Switch Replacement
Solicitation # INL-27-002
Battelle Energy Alliance, LLC, acting as the management and operating contractor for the Department of Energy owned Idaho National Laboratory, has issued an Expression of Interest under solicitation number INL-27-002. The objective is to conduct market research and acquisition planning to identify qualified suppliers capable of replacing obsolete Kinemetrics Model TS-3A seismic switches within the Advanced Test Reactor Plant Protection System. The required solution must provide three-axis ground motion sensing, dry contact output, and adjustable trip setpoints to ensure critical reactor protection functions and long-term system reliability. Potential suppliers must demonstrate the ability to meet stringent nuclear safety standards, including environmental and seismic qualifications per IEEE 323, IEEE 344, IEEE 603, and ANSI/ISA-67.04.01, while maintaining a Quality Assurance Program consistent with ASME NQA-1. Mandatory capabilities include the provision of comprehensive qualification reports, certificates of conformance, and long-term obsolescence management. Interested organizations must submit a concise PDF response, limited to approximately 10 pages, detailing their technical capabilities, business size, and relevant experience to Chase Egbert and Stacey Hill by April 23, 2027.
Other Measuring and Controlling Device Manufacturing

POSTED

7 days ago

DEADLINE

in 5 months
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS