Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ANGLE, FENDER REINFO

Active
SPE7L4-26-T-5978Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of an aluminum angle reinforcement component for fender applications, identified by NSN 2510-00-983-6886 and part number 10911305-2, with a quantity of 73 units. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within or outside the United States, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the associated technical data is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have received formal approval from the DLA controlling authority. The purchase request number is 7016286376, with a delivery timeline of 219 days after contract award. The solicitation, issued under contract number SPE7L4-26-T-5978, was posted on August 4, 2026, with responses due by August 17, 2026. The procurement falls under NAICS code 336211 and is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with performance delivery slated for New Cumberland, PA, 17070-5002. Primary point of contact for inquiries is Ryan Hammond, reachable via email and phone provided in the contract data.

General Info

73 aluminum angle reinforcements for fenders, ITAR/EAR controlled, DLA-certified access only, delivery in 219 days.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

336211 - Motor Vehicle Body ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L4-26-T-5978.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
Ryan Hammond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ANGLE,FENDER REINFO
ANGLE, REINFORCEMENT. ALUMINUM. 10911305-2 (OPPOSITE)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2510-00-983-6886 Quantity: 73 EA Purchase Request: 7016286376QTY: 73 Delivery: 219 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336211
New
DIBBS
FRAME, STRUCTURAL, VEHIC
Solicitation # SPE7L4-26-T-5970
This contract under solicitation SPE7L4-26-T-5970 requires the supply of a single unit of a frame, structural, vehicular component identified by NSN 2510-01-502-5297, with delivery due within 10 days of award and FOB origin terms. The item must strictly comply with all technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, including qualified products lists and qualified manufacturers lists for component sourcing. All packaging, preservation, and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with special markings indicating directional handling and preservation methods per SPI AK15025297 Revision A. The use of Class I ozone-depleting chemicals is prohibited, and any substitutions require prior approval. Configuration changes, deviations, or waivers must be processed through formal engineering change proposals. The item requires no first article testing unless specified, and serialization must be marked on all packaging levels if applicable, with serial numbers documented on the packing list per MIL-STD-129R. The delivery location is Fort Carson, Colorado, with transport governed by DLA procedures, and the contract enforces zero variance in quantity. All materials must be supplied by qualified sources, and government identification must be removed from non-accepted items. The procurement is open to full and fair competition under NAICS code 336211.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336211
New
Federal
FBI Crime Scene Management Vehicles - Updated
Solicitation # 15F06726Q0000291
The FBI is soliciting a firm fixed price, one-time buy for ten Crime Scene Management Vehicles under a Small Business Set-Aside, with solicitation number 15F06726Q0000291 and a submission deadline of August 17, 2026, at 11:00 AM ET. The vehicles consist of six Small Crime Scene Management Vehicles based on a high-top van chassis, three Large Crime Scene Management Vehicles on a medium-duty truck chassis, and one Air-Transport Large Crime Scene Management Vehicle certified for transport on a C-5 Galaxy aircraft. These vehicles will be delivered to ten distinct FBI Field Office locations across the U.S., including Chicago, Los Angeles, New York, Anchorage, Baltimore, Detroit, Denver, Jacksonville, San Diego, and Miami, with delivery required within 18 months of award. Each vehicle must meet stringent technical specifications, including Final Stage Vehicle Certification under FMVSS 49 CFR Part 567, compliance with welding standards per AWS and ANSI specifications, and electrical system adherence to NEC and UL codes. The vehicles must be “ECM 7X ready,” equipped with hardware to support a secured wireless network and mobile charging capabilities. Proposals must be submitted in three clearly separated volumes—Technical Capability, Past Performance, and Price—with Past Performance evaluated on a pass/fail basis and failure resulting in disqualification. The evaluation prioritizes Technical Capability first, followed by Past Performance, with Price as the least significant factor unless non-price ratings are closely matched. Offerors must comply with FAR clauses including 52.212-3, 52.212-4, 52.212-5, and FBI-specific clauses such as FBI-0030 on Organizational Conflict of Interest, which requires disclosure of prior involvement in solicitation development and listing of former FBI employees. SAM registration is mandatory, with current representations and certifications required to be verified within the last 12 months, and submissions must include the Unique Entity Identifier and CAGE code. All proposals must be in Microsoft Office format (2010 or later) or PDF, searchable, and not password protected. Invoices must be submitted through the IPP system only, and the contractor is required to maintain Commercial General Liability Insurance with minimum limits of $1 million per occurrence and $5 million general aggregate for three years post-acceptance. The contract includes strict confidentiality requirements prohibiting disclosure of any Government inquiries, search terms
Fbi-Jeh

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336211
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L3-26-Q-1247
The contract is for the procurement of 47 units of a door, hatch, or vehicle component manufactured through a metal casting process, requiring specialized tooling for production. The item is classified as a ballistic item, necessitating a first article test and a Certificate of Quality Conformance in accordance with SQAP013408919. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item is subject to DLA packaging standards and strict prohibitions against the use of Class I ozone-depleting chemicals, which override any conflicting specification requirements; alternative chemicals must be submitted for approval unless explicitly authorized. This is a total small business set-aside under NAICS code 336211 with full and open competition among qualified small businesses. The contract involves export-controlled technical data governed by either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location and requiring strict compliance with DFARS 252.225-7048. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and approved authorization from DLA. Packaging and handling must comply with DLA standards, and any non-accepted supplies must have government identification removed. The delivery timeline is 184 days after order, with the solicitation closing on August 18, 2026, and the point of contact for inquiries is McKenzie Biniker of the Department of Defense’s Land Supplier Operations Vehicle Support.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336211
New
DIBBS
ARMOR, TRANSPARENT, VEHI
Solicitation # SPE7L3-26-T-143V
This contract pertains to the procurement of armor, transparent vehicular window units identified by NSN 2541-01-337-2114 and part number DNC-23529-3, with a total quantity of 114 units to be delivered FOB origin within 107 days of contract award, with no tolerance for quantity variance. Delivery is mandated to the DLA Distribution facility in New Cumberland, Pennsylvania, and must comply with MIL-STD-2073-1E preservation standards and MIL-STD-129 marking requirements, including the special fragile marking code 36 indicating glass and directional handling. Packaging must adhere to DLA packaging requirements and prohibit the use of mercury or mercury compounds in preservation, packaging, and marking, with exceptions only for specific functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, and even then, portable devices must include secondary containment per NAVSEA 5100-003D. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitutes require prior approval unless explicitly authorized by specifications. The contractor, Daimler Truck North America LLC, is required to perform a CMMC Level 2 Cybersecurity Maturity Model Certification self-assessment, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. All items must meet federal procurement standards, with inspection and acceptance occurring at the destination, and the contract is subject to DoD shipping protocols as outlined in DLAD Proc Notes C19 and C20.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336211
New
DIBBS
ARMOR, TRANSPARENT, V
Solicitation # SPE7L3-26-T-143U
The contract specifies the procurement of 16 units of transparent ballistic glass for vehicular applications, identified by NSN 2541-01-478-0486, under solicitation SPE7L3-26-T-143U. All supplied items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions for approval. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. The contract falls under NAICS code 336211 and is issued by the Department of Defense through the Land Supplier Operations Vehicle Support agency. Delivery is required within 163 days after order, with performance located at New Cumberland, PA, 17070-5002. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026. Covered defense information provisions apply, and all inquiries should be directed to Kayla Buchanan at the provided contact details.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336211
New
SLED
Specialized Vehicle Modifications Supply or ServiceThe contract is for the procurement or customization of vehicles with specialized modifications that require niche or proprietary builds, where only a single qualified source exists to fulfill the requirements. This subcontract, issued by the state of Utah under NAICS code 336211, necessitates unique engineering and manufacturing capabilities that are not available from multiple vendors, making it a sole-source opportunity. The solicitation was posted on August 1, 2026, with a response deadline of August 10, 2026, at 5:00 PM, and the work is expected to be performed within Utah, though specific location details are not provided. The absence of a solicitation number and point of contact indicates that the process may be managed internally through the Utah Bonfire Hub platform, where all submissions and communications must be directed. The nature of the modifications implies high technical specificity, likely serving critical operational needs that demand exacting standards and verified expertise from a single supplier.
Utah

POSTED

4 days ago

DEADLINE

in 6 days
View Details
NAICS: 336211
New
DIBBS
KINGPIN, FIFTH WHEEL
Solicitation # SPE7L3-26-T-123Z
The contract is for the procurement of six KINGPIN, FIFTH WHEEL units identified by NSN 2510011097054 under solicitation SPE7L3-26-T-123Z, issued as a total small business set-aside under NAICS code 336211. Delivery is required FOB Origin with a 157-day lead time, and the original delivery date is March 20, 2027, with a need ship date of January 5, 2027. The item is classified as a critical application item governed by CID A-A-52479 Revision D, and all technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting specifications. The item must be packaged in accordance with ASTM D3951, but only if not overridden by the DLA Master List, and all packaging and labeling must strictly comply with MIL-STD-129, including 2D barcode requirements. Palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Inspection and acceptance occur at origin, with sampling mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in any sample lot, even if referenced standards like MIL-STD-105 allow for limited defects; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized in the specification. The contract incorporates a comprehensive suite of FAR and DFARS clauses, including those related to combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards, and safeguarding covered defense information. Contractors must comply with the requirement to use Wide Area WorkFlow for invoicing and possess current UEI and CAGE codes. The solicitation is awarded based on small business status and technical acceptability, with no price evaluation preference or trade-off methodology specified; prices are not listed in the provided document. All proposals must be submitted electronically via the DLA BSM portal by the August 5, 2026 deadline, and the contract is subject to deviations from standard FAR clauses including 2
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

4 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 336211
New
DIBBS
25--SHOCK ABSORBER,DIRECT
Solicitation # SPE7L1-26-U-0526
This solicitation, numbered SPE7L1-26-U-0526, seeks quotes for 277 shock absorbers, direct action, identified by NSN 2510014792207, under a potential Indefinite Delivery Contract with a one-year term or until spending reaches $350,000, whichever comes first. The guaranteed minimum order quantity is 41 units, and the estimated annual usage is two orders. The contract is a Small Business Set Aside under NAICS code 336211, and all responses must be submitted electronically via the DLA Internet Bid Board System by August 14, 2026. Approved source is 64678 16-15770-000, and no hard copies or technical drawings are available. Items will be shipped to various CONUS and OCONUS DLA depots via consolidation and containerization, with delivery terms requiring FOB origin pricing, though actual delivery is FOB destination. Packaging must adhere strictly to MIL-STD-2073-1E Method 33 dry preservation with corrosion-inhibiting wrap, ASTM-D4727 weather-resistant corrugated fiberboard, and RP001 palletization standards, while all marking and barcoding must comply with MIL-STD-129 and the DoD IUID program. Prohibited materials include mercury compounds, and hazard communication labeling must meet 29 CFR 1910.1200 where applicable. The contract will be administered under a Fixed-Price type, with inspection and acceptance conducted at destination, and invoicing processed exclusively through WAWF. Subcontracting is governed by clauses for commercial products and services, and the contractor must comply with extensive safeguarding requirements including NIST SP 800-171, DFARS 252.204-7012, and safeguarding covered defense information. Additional compliance obligations include prohibiting human trafficking, validating employment eligibility through E-Verify, ensuring sustainable product use, and adhering to ethics and whistleblower protection mandates. Contractors must be registered in SAM with a valid UEI and CAGE code, and must represent their small business status as required under FAR 52.219-1. The award will likely follow a Low-Price Technically Acceptable methodology, with no trade-off process anticipated. No specific point of contact for
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 336211
New
DIBBS
Manufacturing of Vehicular Body Panel (NSN: 2510015219905)The contract entails the full-scale manufacturing of a vehicular body panel in accordance with military specifications, covering every phase from material sourcing and fabrication to rigorous quality control and final delivery of three finished units. The work must adhere strictly to the National Stock Number 2510015219905 and is governed by industry standards applicable to defense-grade components, requiring certified processes and documented compliance throughout production. Performing activities are to be conducted with the place of performance set in New Cumberland, Pennsylvania, under the oversight of the Department of Defense through its Land Supplier Operations Vehicle Support division. The solicitation, classified as a subcontract, was posted on July 30, 2026, and responses are due by August 10, 2026. The NAICS code 336211 identifies the sector as motor vehicle body and trailer manufacturing, indicating the need for specialized automotive fabrication expertise aligned with military requirements. All deliverables must meet exacting performance and durability criteria expected for operational military vehicles.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336211
New
DIBBS
Supply of Automotive Vehicle Components or AssembliesThe contract requires the manufacturing and delivery of automotive vehicle components or complete assemblies that must fully comply with Department of Defense Logistics Agency standards, including MIL-STD-129 for labeling and barcoding requirements and OSHA HAZCOM regulations if hazardous materials are involved. All deliveries must meet strict technical and documentation criteria to ensure compatibility and safety within military vehicle systems, with the place of performance specified as TEXARKANA, TX, 75507-5000. The solicitation is classified as a subcontract under NAICS code 336211, and the contracting authority is the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT organization, with responses due by August 10, 2026, and the opportunity posted on July 30, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336211
New
DIBBS
Structural Vehicle Frame Section SupplyThe contract seeks the manufacture or supply of a military-specification structural vehicle frame section designated by NSN 2510015310555, requiring full compliance with ASTM material and testing standards, MIL-STD military specifications, and DLA packaging and labeling requirements to ensure interoperability and durability in operational environments. The item is intended for use by U.S. military forces and must meet stringent quality and performance benchmarks to support vehicle integrity under extreme conditions. Delivery is to be performed at CAMP LEJEUNE with a zip code of 28547, indicating the final destination is a major Marine Corps installation. This is a subcontract solicitation posted on July 30, 2026, with a response deadline of August 10, 2026, under NAICS code 336211 which classifies the industry as Motor Vehicle Body and Trailer Manufacturing. The contracting activity falls under the Department of Defense through the LAND SUPPLY CHAIN organization, indicating the procurement is managed by a defense logistics entity focused on ground equipment sustainment. There is no set-aside designation, meaning the opportunity is open to all qualified suppliers without preference for small, minority, or other specialized business categories. Interested parties must access the official solicitation via the provided DIBBS link to obtain full technical requirements, submission instructions, and evaluation criteria.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336211
New
DIBBS
Manufacture or Supply of Extension Fender (NSN: 2510-00-455-1351)The contract requires the manufacture or supply of ten military-specification extension fenders designated by NSN 2510-00-455-1351, all of which must fully comply with the rigorous standards of MIL-STD-105, MIL-W-45205, MIL-STD-129, and MIL-STD-2073-1E, covering fabrication, packaging, labeling, and documentation. The fenders must be delivered to the specified performance location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the entire project must be completed within a strict timeline of 258 days from contract award. All items must meet exacting military quality and traceability requirements, including proper labeling and packaging as mandated by the referenced standards. This is a subcontract issued under the NAICS code 336211, indicating it pertains to the manufacturing of motor vehicle bodies and trailers, and is administered by the Department of Defense through the Land Supplier Operations Vehicle Support organization. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, leaving a narrow window for interested parties to submit proposals. The contract is not set aside for any specific small business category, and the full compliance with military specifications is non-negotiable, making technical adherence and proven capability essential for qualification. Delivery must be synchronized with military logistics protocols to ensure seamless integration into the defense supply chain.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

5 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7L4-26-T-5973
The contract specifies a single unit of a special-purpose electrical cable assembly with NSN 5995-01-623-4267, requiring delivery within five days FOB origin, with no tolerance for quantity variance. The item must meet stringent technical and quality standards defined by the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements, including palletization per RP001, and all markings must adhere to established military protocols. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, enforcing zero non-conformances unless otherwise contracted. The cable assembly is subject to Cybersecurity Maturity Model Certification Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. The delivery address is Holloman Air Force Base, and shipment must use traceable freight methods—parcel post is prohibited. The contract was issued under solicitation SPE7L4-26-T-5973 with an original required delivery date of August 3, 2026, and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L4-26-T-5974
The contract pertains to the procurement of one bracket, vehicular component, identified by NSN 2590-01-559-1306 and part number 6433083-01M1, to be supplied by BAE Systems Land & Armaments L.P. or AMZ Alabama Inc. Delivery is required within five days of award, with shipment FOB origin and no variance in quantity allowed. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering strictly to DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Packaging and labeling must follow MIL-STD-129 and RP001, with palletization requirements enforced. The item is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be approved unless explicitly authorized by specifications. The delivery destination is in Kaiserslautern, Germany, with the shipment marked for SSA Building 2371 and designated under RDD 999/NMCS procedures. Transportation details reference DLAD PROC NOTE C19 and C20. The contract is tied to solicitation SPE7L4-26-T-5974, with an original required delivery date of August 4, 2026, and all government-specific codes and identifiers are included for administrative and logistical tracking.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
PANEL ASSEMBLY, CONSOLE
Solicitation # SPE7L4-26-T-5968
The contract specifies the procurement of one unit of a PANEL ASSEMBLY, CONSOLE with NSN 2540-01-179-8841 and part number L112652, supplied by CNH INDUSTRIAL AMERICA LLC. Delivery is required within five days of contract award, with shipment originating FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination. The item must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951; if hazardous per FED-STD-313, packaging must meet TQ requirement IP025, otherwise commercial packaging is permitted. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001. The shipment must be sent via traceable freight methods—parcel post is prohibited—and is to be delivered to the designated military receiving site at Fort Polk, Louisiana, under the RDD/NCMS shipment protocol. The contract references solicitation SPE7L4-26-T-5968, with a required delivery date of August 3, 2026, and the point of contact for inquiries is Anna-Rachelle Betts at DLA. The unit of issue is each (EA) and the total contract value is based on the listed unit price for a single item.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
BAR, LOCKING
Solicitation # SPE7L4-26-T-5969
The contract pertains to the procurement of a single unit of a BAR, LOCKING component identified by NSN 1005-01-188-7858 under solicitation SPE7L4-26-T-5969, with a delivery requirement of five days after award. The item is subject to stringent DLA packaging, technical, and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The component is classified under Category I Munitions List items, triggering strict demilitarization protocols for disposal, and is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access accompanying technical data. The contract mandates adherence to configuration change management, qualified products or manufacturers lists where applicable, inspection and acceptance at origin, and removal of government identification from non-accepted items. Measuring and test equipment must comply with specified standards, and all parties must follow DFARS 252.225-7048 for export-controlled technical data handling. The procurement is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with Paula Chapman as the point of contact, and responses are due by August 17, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
HOOK, PINTLE
Solicitation # SPE7L4-26-U-1050
This contract is for the procurement of a HOOK PINTLE with NSN 2540-01-558-4395 under solicitation SPE7L4-26-U-1050, issued by the Department of Defense through the Defense Logistics Agency. The item is classified as a critical application component and must conform to precise technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override any other specification unless explicitly authorized. The contract prohibits the use of Class I ozone-depleting chemicals in manufacturing or packaging, requiring any substitute chemicals to be submitted for approval. The item must be delivered FOB origin within 80 days in strict quantities of 135 units, with no tolerance for variance in quantity. Packaging must comply with DLA-specific requirements including MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging unless hazardous per Fed-Std-313, in which case TQ requirement IP025 applies, with palletization conforming to RP001. Inspection and acceptance occur at the destination point, and all packaging must reflect the prescribed Unit of Issue and Quantity per Unit Pack (QUP). The procurement is a total small business set-aside under NAICS code 336390, with the estimated unit price at $135.00 per item totaling $18,225.00, though the quantity is considered estimated and subject to modification by the IDC. The contract references the DLA-defined unit of issue system and directs contractors to the official online resource for ANSI X12 conversion. The point of contact is Heather Kessler of the LSO Combat Vehicles and Armament office, with full solicitation details available through the DIBBS system. The solicitation closed on August 19, 2026, with an award expected to follow, and all suppliers must comply with the requirement to remove government identification from non-accepted supplies. The contract does not specify delivery location beyond FOB origin, and all terms are governed by DLA policies with no deviations permitted without formal amendment.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
CLAMP, ELECTRICAL
Solicitation # SPE7L4-26-T-5979
This contract is for the procurement of one electrical clamp, identified by NSN 5999-01-302-4282 and part number 480732, under solicitation SPE7L4-26-T-5979, issued by the Department of Defense through the Logistics Support Activity for Combat Vehicles and Armament. Delivery is required within five days of order placement to Fort Riley, Kansas, with FOB origin terms and zero tolerance for quantity variance. The item is classified as a critical application component and must comply with all DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must adhere strictly to MIL-STD-129 and RP001, with hazardous materials governed by TQ requirement IP025 and non-hazardous items packaged per ASTM D3951 unless superseded by DLA standards. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Transportation must utilize traceable freight methods, excluding parcel post, and all shipments must be marked with the provided government routing and freight information. The required delivery date is August 4, 2026, with no flexibility allowed on delivery timeline or quantity, and acceptance occurs at the destination point.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336360
New
DIBBS
TARPAULIN EXTENSION
Solicitation # SPE7L4-26-T-5983
This contract pertains to the procurement of a tarpaulin extension with NSN 2540-01-723-0399, quantity of one unit, to be delivered within ten days of contract award under solicitation SPE7L4-26-T-5983. Delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards including ASTM D3951. Packaging must adhere strictly to DLA’s packaging requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous materials packaged according to TQ requirement IP025 if identified per FED-STD-313. Ozone-depleting chemicals are strictly prohibited in the product or its manufacturing process, and any substitute chemicals must be pre-approved unless explicitly authorized. The unit of issue is each (EA), and palletization must follow DLA guidelines. The destination is W8000V, Prince Sultan Air Base, Saudi Arabia, with shipment logistics governed by DLAD Proc Notes C19 and C20. The required delivery date is July 30, 2026, and the item is intended for U.S. Forces maintenance use. The contract excludes any set-aside provisions and falls under NAICS code 336360 for defense manufacturing.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7L4-26-T-5980
The contract pertains to the procurement of a single unit of a pulley with a groove, identified by NSN 3020-01-338-4624 and part number SC-108, under solicitation SPE7L4-26-T-5980. Delivery is required within 20 days from the award date, with FOB origin terms, and the item must be delivered to Fort Eustis, Virginia, identified by the shipping address W26RK4, Building 1610, Patch Rd, AWCF SSF. The quantity variance is strictly zero percent, meaning exactly one unit must be supplied. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering to MIL-STD-129 for marking and labeling. DLA’s Master List of Technical and Quality Requirements supersede any conflicting standards, and palletization must meet the specific packaging guidelines outlined in RP001. Shipments must use traceable methods only, excluding parcel post, and are tied to a government tracking number and project code TP 3. The contract specifies the unit of issue as each and the total price for one unit. The required delivery date is July 24, 2026, and the purchase request number is 7017643799. The point of contact is Anna-Rachelle Betts, and inquiries should be directed to her at the provided email and phone. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, under NAICS code 333613 for the Department of Defense's Combat Vehicles and Armament division. All technical and quality requirements referenced through R or I numbers in the DLA Master List govern the product’s conformance, and the Government maintains administrative controls for tracking and disposition using the designated DIC, DIST, and ADV codes. The vendor, Columbus Jack Corporation, is expected to fulfill all specifications, packaging, and delivery obligations to avoid rejection or non-compliance.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
GEAR, WORM WHEEL
Solicitation # SPE7L4-26-T-5982
The contract is for one worm wheel gear, identified by NSN 3020-01-087-5122 and part number 27021-1280, under solicitation SPE7L4-26-T-5982, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. The item must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must follow MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking code, and the gear must be packaged in a Type 1, 2, or 3, Class B or C, Style 1 bag per MIL-B-117. Delivery is required within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination. The item must be shipped via the fastest traceable means, explicitly excluding parcel post, to the receiving address in Silverdale, Washington, with a required delivery date of July 28, 2026. All shipments must adhere to specified palletization and container instructions, and the point of contact for inquiries is Anna-Rachelle Betts. The contract includes government-only identifiers and project codes for tracking and administrative purposes.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
DIBBS
VALVE, RELAY, AIR PRESSU
Solicitation # SPE7L4-26-T-5984
This contract covers the procurement of a valve, relay, air pressure, identified by NSN 2530-01-470-5919, with a required quantity of three units to be delivered within 20 days of award. The item must strictly conform to the source-controlled drawing specification SPE7L4-26-T-5984 and the referenced technical drawing revision D dated 11/21/2023, with part number 12422042, and is supplied exclusively by WABCO USA LLC under part number 472 195 017 0. Manufacturing requires a metal casting process and compliant tooling, with all components subject to source control and no deviations permitted without formal approval. The contract mandates adherence to DLA packaging standards MIL-STD-2073-1E and MIL-STD-129, with special marking code ZZ, palletization compliant with DLA requirements, and shipment via traceable freight only—parcel post is prohibited. Delivery is FOB origin to Fort Sill, Oklahoma, with inspection and acceptance occurring at the destination. The item is classified as a critical application and must not contain ozone-depleting chemicals, mercury or mercury-containing compounds except under strictly defined exceptions, and must comply with all applicable technical and quality requirements referenced in the DLA Master List. All offers require certification of conformance unless waived by a quality assurance letter, and configuration changes must follow formal engineering change proposal procedures. The contract includes restricted data provisions and requires compliance with defense information handling protocols.
Motor Vehicle Brake System Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7L4-26-T-5971
This contract is for a single cable assembly identified by NSN 5995-01-623-4318, with a delivery requirement of five days after award. The solicitation, issued under number SPE7L4-26-T-5971, was posted on August 4, 2026, with responses due by August 17, 2026, and falls under NAICS code 334419 for other electronic component manufacturing. The contract is administered by the Department of Defense through the LSO Combat Vehicles and Armament office, with performance required at Holloman AFB, New Mexico, 88330-7706. All technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition size and timing of solicitation amendments. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331 Table 1, or another zero-based sampling plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0, and unspecified attributes are treated as major unless otherwise stated. Zero non-conformances are required in sample lots unless the contract specifies otherwise. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons, including employees and subsidiaries, without prior government authorization. Access to this controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and questionnaire, and been formally approved by DLA. Non-accepted supplies must be stripped of government identification prior to return.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CENTERING
Solicitation # SPE7L4-26-T-5975
The contract pertains to the procurement of one centering bolt, identified by NSN 5306-01-163-4851 and part number 10512246, under solicitation SPE7L4-26-T-5975, with a required delivery in five days FOB origin. The item must comply with all technical and quality requirements stipulated in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines, and all labeling must include the correct Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at the destination, with zero non-conformances mandated in sampling unless otherwise stated, using MIL-STD-1916 or comparable zero-based plans, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The delivery address and mark-for location are identical, designated for the PM Stryker Log Demo GDLS facility in Sterling Heights, Michigan, and shipment must occur via the fastest traceable means, excluding parcel post. The contract mandates strict adherence to government protocols for covered defense information and includes specific administrative codes for government use, with the original required delivery date set for August 4, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details