Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Annual Generator Load Bank Testing

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Homeland Security involves performing annual load bank testing on portable and fixed standby generators at the FLETC Glynco facility in Brunswick, Georgia. The primary objective is to verify operational capacity by conducting tests strictly in accordance with NFPA 110 standards using equipment capable of meeting specific kVA/kW ratings. The selected provider must deliver detailed annual test reports documenting all results and observations. The opportunity is a total Small Business Set Aside under NAICS code 811310. Qualified technicians must possess NFPA 110 compliance expertise and obtain the necessary site security badging to perform the work. The procurement is managed by the FLETC Glynco Procurement Office, with a response deadline of September 18, 2026.

General Info

Annual NFPA 110 load bank generator testing at FLETC Glynco for DHS.

Agency

Department Of Homeland Security → Fletc Glynco Procurement OfficeView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Brunswick, GA, 31524, USA

Set-Aside

SBA

Documents

This scope was carved out of 70LGLY26QGLB00058.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Generator Maintenance and Repair

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Fletc Glynco Procurement Office
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Homeland Security → Fletc Glynco Procurement Office
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs annual load bank testing on portable and fixed standby generators for prime contractors on FLETC Glynco facility projects to verify operational capacity. Conducts testing strictly in accordance with NFPA 110 standards using load bank equipment capable of handling specific kVA/kW ratings. Requires technicians qualified in NFPA 110 compliance and site security badging. Delivers annual load bank test reports detailing results and observations.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
RFQ#3857 Replace Walk-In Cooler and Freezer Doors
Solicitation # RFQ#3857
Management & Training Corporation (MTC) is soliciting bids under RFQ#3857 for a subcontracting opportunity to replace three walk-in refrigeration doors at the Charleston Job Corps Center in Charleston, West Virginia. The scope of work requires the contractor to provide all labor, materials, and supervision to remove and dispose of existing doors and install one walk-in cooler door and two walk-in freezer doors. The project includes the installation of all necessary hardware, such as hinges, latches, gaskets, and thresholds, ensuring airtight sealing and proper alignment. Deliverables include the fully operational doors and a minimum one-year workmanship warranty along with manufacturer certificates. This is a lump sum fee contract open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must submit their proposals via email by September 28, 2026, at 3:00 PM EST. Required submission documents include a bid sheet, a completed supplier packet with IRS W-9 and self-certification forms, proof of insurance, and three references for similar projects. Award selection is based on best value as determined by MTC. The contractor must comply with OSHA safety requirements, the Buy American Act, and Service Contract Labor Standards under Wage Determination 2015-4347. Invoicing is to be submitted on a weekly or bi-weekly basis and must include a valid purchase order number.
Management & Training Corporation

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 811310
New
Federal
Barge #600 Hydraulic Lines Replacement for Missouri River Project Office (MRPO)
Solicitation # W9128F26QA097
Solicitation W9128F26QA097 is a firm-fixed-price request for proposals issued by the Department of Defense for the maintenance overhaul and replacement of the high-pressure hydraulic piping system on Equipment Barge #600. Located at the Missouri River Project Office in Omaha, Nebraska, the project requires the removal and replacement of both flexible lines inside the hull and rigid steel lines housed above deck. The scope of work includes draining and disposing of hydraulic fluid, furnishing new materials—specifically Schedule 160 seamless steel pipe and SAE 100R12 flexible lines—performing pressure testing at 3000 psi, and conducting necessary structural repairs such as cutting and patching access holes with ASTM A36 carbon structural steel. The period of performance is scheduled from November 15, 2026, through March 15, 2027. This is a total small business set-aside, and the government will award the contract to the offeror providing the best value, considering both price and past performance. Offerors must demonstrate experience by providing up to three projects of similar magnitude completed within the last five years. Due to the nature of the work, the contractor must adhere to strict safety protocols for permit-required confined spaces, complying with EM 385-1-1 and OSHA standards, and must maintain independent on-site rescue procedures. Key submittals required before work begins include a site-specific health and safety plan, a work plan, material certifications, and proof of insurance. Proposals must be submitted electronically to Grant Hibbs no later than September 18, 2026, at 2:00 PM local time. A site visit is scheduled for September 11, 2026, requiring RSVP and specific confined space documentation for barge access.
W071 Endist Omaha

POSTED

about 14 hours ago

DEADLINE

in 1 day
View Details
NAICS: 811310
New
Federal
TURBOCHARGER EXHAUST LEFT
Solicitation # 70Z08026QDL062
The United States Coast Guard Surface Forces Logistics Center is soliciting quotations for the open, inspection, report, and possible overhaul of four left-side turbochargers, part number EX59610100196 and NSN 2950 12 390 5601. These components are used on 154 foot WPC vessel MTU 4000 series diesel engines. The requirement is a total small business set-aside under NAICS 811310, with an estimated total value of 57,057 dollars. The objective is to restore the units to a service ready condition in strict accordance with Original Equipment Manufacturer specifications from Rolls Royce Solutions GMBH. Substitute parts are not acceptable, and the contractor must use only OEM parts and procedures to ensure vessel safety and mission reliability. The contract is a firm fixed price award based on the lowest price technically acceptable offer. The contractor must provide a separate inspection fee and a firm fixed repair price per unit. Deliveries are required by December 20, 2026, F.O.B. Destination to the SFLC receiving room in Baltimore, Maryland. Strict preservation, packaging, and marking standards apply, including the use of ASTM D-3951 or ASTM-D6880 heavy duty wooden crates and marking in accordance with MIL-STD-129R. The contractor must guarantee the items against defects for 90 days after installation or up to two years after delivery. All offerors must be registered in SAM.gov and provide necessary representations and certifications.
Sflc Procurement Branch 1(00080)

POSTED

about 14 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Homeland Security → Fletc Glynco Procurement Office

Same awarding agency

NAICS: 332312
New
Federal
Aluminum Pedestrian Truss Bridge
Solicitation # FLETC26EOYTTO0014
Solicitation FLETC26EOYTTO0014 is a combined synopsis and request for quotation for the procurement of one new aluminum pedestrian truss bridge for the Federal Law Enforcement Training Center (FLETC) in Brunswick, Georgia. This firm-fixed-price contract is not set aside for small businesses and requires offerors to be registered in the System for Award Management. The bridge must be a marine-grade aluminum Howe Truss configuration with a mill finish, featuring a 42-inch high combination mid-railing and fall-prevention barrier, and high-traction aluminum plank decking. Technical requirements include certification to ASCE 7-05 for wind speeds of 110 mph, a uniform live load of 90 psf per IBC codes, and a structural rating for vehicles up to 2,500 lbs. Additionally, anchor bolt designs must be stamped by a licensed Professional Engineer. The government will evaluate offers based on price, technical acceptance, and the proposed delivery timeline. Shipping must be free on board (FOB) destination to the specified address in Brunswick, Georgia, with the seller assuming all costs and risk of loss until delivery. To be considered acceptable, offerors must submit a signed RFQ with the completed Technical Exhibit 1, an official company quote including their UEI and detailed pricing, a projected delivery timeline, and comprehensive technical drawings and specifications. Amendment 1 updated the closing date to September 18, 2026, added a Q&A attachment, and incorporated Buy American provisions. Awardees must also comply with regulations regarding the combating of trafficking in persons and the handling of controlled unclassified information.
Fabricated Structural Metal Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 236220
New
Federal
DHS - FLETC - GLYNCO - FENCE UPGRADE
Solicitation # 70LGLY26QSSB00077
Solicitation 70LGLY26QSSB00077 is a total small business set-aside for the upgrade and replacement of the front barrier perimeter fence at the Federal Law Enforcement Training Centers (FLETC) Glynco facility in Brunswick, Georgia. The project is driven by the need to comply with Executive Order 14111 and Interagency Security Committee (ISC) requirements, as the existing fencing is non-compliant with anti-climb, anti-scale, and anti-crash standards. The contractor must design and install a perimeter fence meeting ASTM F2656 M30/P1 crash ratings or better, including specific technical requirements for the sally port gate. The period of performance is established from September 30, 2026, to March 31, 2027, with a general 180-day timeline from the date of award. The award will be based on the most advantageous offer, weighing price equally against a combination of project experience, personnel, and past performance retrieved from CPARS. Key requirements include the submission of a bid guarantee of 20 percent of the bid amount or 3 million dollars, whichever is less, and the provision of performance and payment bonds within 10 days of award. Technical proposals are limited to 20 pages and must include resumes for key personnel, including a Project Manager, Superintendent, and Safety Manager. The scope of work involves phased installation to maintain perimeter security, strict adherence to Davis-Bacon wage determinations, and compliance with hazardous waste packaging and utility marking standards.
Commercial and Institutional Building Construction

POSTED

3 days ago

DEADLINE

in about 16 hours
View Details
NAICS: 236220
New
Federal
Building 93 Renovation
Solicitation # 70LGLY26RSSB00037
Solicitation 70LGLY26RSSB00037 is a request for a single firm fixed price contract for the renovation of Building 93 at the Federal Law Enforcement Training Center in Glynco, Georgia. The project is a 100 percent total small business set-aside under NAICS code 236220, with a construction magnitude estimated between 1 million and 5 million dollars. The scope of work includes comprehensive renovations to bathrooms, hallways, Suite 140, and Suite 160, involving demolition and replacement of concrete and carpet, installation of LVP flooring, sewer line replacement, new plumbing fixtures, painting, and HVAC testing and balancing. The period of performance is not to exceed 334 calendar days following the notice to proceed, with a scheduled performance window from September 30, 2026, to August 30, 2027. Award decisions will be based on a best suited then negotiate methodology, where price is of equal importance to non-cost factors, specifically past performance and corporate relevant experience. Offerors must achieve at least a satisfactory rating for past performance and an acceptable rating for corporate experience to be eligible. Proposals are due electronically by 11:00 AM Eastern Time on September 17, 2026. Key requirements include the submission of a non-disclosure agreement to access secure technical documents, the provision of performance and payment bonds, and compliance with the FLETC Hazardous Waste Management Plan. Additionally, the contract stipulates liquidated damages of 236.53 dollars per calendar day of delay and requires a quality control plan, including a key control system, to be approved five days before the contract start date.
Commercial and Institutional Building Construction

POSTED

6 days ago

DEADLINE

in about 13 hours
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS