Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Standby Generator Preventative Maintenance and Repair

Active

Federal

Response Deadline09/18/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with the Department of Homeland Security's FLETC Glynco Procurement Office involves comprehensive maintenance and troubleshooting for portable and fixed standby generators at the Glynco facility in Brunswick. The scope of work includes performing three minor and one major inspection per generator annually, responding to troubleshooting calls, and executing minor repairs using OEM parts and manufacturer-recommended lubricants. Qualified technicians must possess PIV cards or identification badges and are required to provide detailed inspection reports, maintenance logs, and certifications of service. This is a Small Business Set Aside under NAICS code 811310, with a response deadline of September 18, 2026.

General Info

DHS FLETC Glynco subcontract for generator maintenance and repair, Small Business Set Aside.

Agency

Department Of Homeland Security → Fletc Glynco Procurement OfficeView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Brunswick, GA, 31524, USA

Set-Aside

SBA

Documents

This scope was carved out of 70LGLY26QGLB00058.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Generator Maintenance and Repair

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 18

Submission deadline

Response Deadline

09/18/2026, 08:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Fletc Glynco Procurement Office

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Fletc Glynco Procurement Office

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs comprehensive maintenance and troubleshooting for portable and fixed standby generators for prime contractors on FLETC Glynco facility projects. Conducts three minor and one major inspection per generator annually, performs troubleshooting calls, and executes minor repairs. Uses manufacturer-recommended lubricants and OEM parts. Requires trained, qualified technicians with PIV cards/identification badges. Delivers inspection reports, maintenance logs, and certifications of service.

Similar Contracts

Same NAICS industry code

RFQ#3857 Replace Walk-In Cooler and Freezer Doors

Solicitation # RFQ#3857

Management & Training Corporation (MTC) is soliciting bids under RFQ#3857 for a subcontracting opportunity to replace three walk-in refrigeration doors at the Charleston Job Corps Center in Charleston, West Virginia. The scope of work requires the contractor to provide all labor, materials, and supervision to remove and dispose of existing doors and install one walk-in cooler door and two walk-in freezer doors. The project includes the installation of all necessary hardware, such as hinges, latches, gaskets, and thresholds, ensuring airtight sealing and proper alignment. Deliverables include the fully operational doors and a minimum one-year workmanship warranty along with manufacturer certificates. This is a lump sum fee contract open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must submit their proposals via email by September 28, 2026, at 3:00 PM EST. Required submission documents include a bid sheet, a completed supplier packet with IRS W-9 and self-certification forms, proof of insurance, and three references for similar projects. Award selection is based on best value as determined by MTC. The contractor must comply with OSHA safety requirements, the Buy American Act, and Service Contract Labor Standards under Wage Determination 2015-4347. Invoicing is to be submitted on a weekly or bi-weekly basis and must include a valid purchase order number.

Management & Training Corporation

POSTED

about 10 hours ago

DEADLINE

27-048: On-Call Repair and Maintenance of Gym Equipment

Solicitation # BD-27-1167-PUR02-PUR01-133507

The solicitation numbered BD-27-1167-PUR02-PUR01-133507 is for on-call repair and maintenance services for gym equipment in Springfield, Massachusetts. This procurement is managed by the Massachusetts Procurement agency and is overseen by the primary point of contact, Neil Walker. The opportunity was posted on September 16, 2026, and the deadline for responses is October 2, 2026. All services will be performed within Springfield, Massachusetts, and further details can be accessed through the CommBuys portal.

PUR02 - Procurement

POSTED

about 13 hours ago

DEADLINE

Wastewater Pump Impeller and Volute Replacement - Central Ave Pump Station

Solicitation # BD-26-1652-PW240-PW240-133223

The Department of Public Works for Massachusetts is seeking bids for the Wastewater Pump Impeller and Volute Replacement project at the Central Ave Pump Station. This solicitation, identified as BD-26-1652-PW240-PW240-133223, involves specialized equipment replacement services to be performed in Ayer, Massachusetts. The solicitation was posted on September 16, 2026, with a response deadline of October 16, 2026, at 7:00 PM. Interested parties should direct inquiries to the primary point of contact, Purchaser Matt Hernon, regarding this SLED organization project.

PW240 - Department of Public Works

POSTED

about 13 hours ago

DEADLINE

Wagner Paint Proportioner Maintenance & RepairThis subcontract opportunity with the Department of Defense, specifically AFSC OL H PZIM, involves the specialized servicing, maintenance, and repair of Wagner Paint Proportioner systems at Hill Air Force Base. The selected contractor will be responsible for performing critical tasks including calibration, seal replacement, pump maintenance, and system testing to ensure accurate paint-to-hardener ratios, ultimately delivering a fully operational system. Eligible bidders must demonstrate a documented history of providing similar services to government or commercial clients within the last three years. The project falls under NAICS code 811310, with a response deadline of September 28, 2026.

FA8227 Afsc Ol H Pzim

POSTED

about 14 hours ago

DEADLINE

81--CYLINDER,COMPRESSED, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSC29

This presolicitation contract, issued by the Department of Defense under Navsup Weapon Systems Support, is for the repair or modification of 40 compressed cylinders identified by NSN 7R-8120-016571545-P8. The requirement specifies the use of TDP Version 002 and stipulates that delivery will be handled FOB Origin. The solicitation, numbered N0038326QSC29, was posted on September 16, 2026, with a response deadline of November 2, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact for this requirement is Sarah L. Austin.

Navsup Weapon Systems Support

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Leavenworth, TX CMOP - Walk-in Cooler Repair

Solicitation # 36C77026Q0184

This solicitation, numbered 36C77026Q0184, is for the repair of a walk-in cooler at the Department of Veterans Affairs CMOP facility located in Lancaster, Texas. The project is designated as a 100 percent set-aside for Service-Disabled Veteran-Owned Small Businesses and has an estimated magnitude of less than 25,000 dollars. A site visit is scheduled for September 17, 2026, at 12:00pm Central, requiring coordination with William Byrd and Robert Gochenour. Interested parties must submit their responses by the deadline of September 23, 2026.

National Cmop Office (36C770)

POSTED

about 14 hours ago

DEADLINE

High Reach Genie Services

Solicitation # FA660626Q0033

Solicitation FA600626Q0033 is a small business set-aside for a firm-fixed-price contract to provide preventative maintenance and unscheduled mechanical repairs for a fleet of eight specialized aerial boom lifts, scissor lifts, and material handling tow tractors at Westover Air Reserve Base. The requirement includes annual and quarterly safety compliance checks and strict emergency response timelines, requiring technicians to arrive on-site within 24 hours of notification, provide estimates within 24 business hours of diagnosis, and complete repairs within 24 hours of approval. Technicians must hold ANSI/IPAF or equivalent commercial certifications for Genie, JLG, or Toyota equipment. The government will award the contract based on the Lowest Price Technically Acceptable (LPTA) method, evaluating offerors on a pass/fail basis regarding personnel qualifications and their responsive deployment plan. Proposals must be submitted electronically by September 16, 2026, and include personnel credentials, a deployment narrative, and pricing tables for the base and option years. The fleet currently consists of four active assets, with four additional assets to be phased in via administrative modification upon delivery.

FA6606 439 Conf Pk

POSTED

about 14 hours ago

DEADLINE

RFQ - Uninterruptible Power Supply (UPS) Units Maintenance and Repair Support Services

Solicitation # PANAPG-26-Q-0UPS

POSTED

about 14 hours ago

DEADLINE

J059--PNEUMATIC TUBE SYSTEM PM&R SERVICES HARRY S TRUMAN VA MEDICAL CENTER COLUMBIA, MISSOURI

Solicitation # 36C25527Q0007

The Department of Veterans Affairs, specifically Network Contracting Office 15, is conducting market research through a sources sought notice for pneumatic tube system preventive maintenance and repair services at the Harry S Truman VA Medical Center in Columbia, Missouri. This announcement is for research purposes only and is not a formal request for proposals or quotes. The government intends to set this requirement aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), though it remains open to other qualified sources across various size classifications under NAICS code 811310 and PSC J059. Interested contractors must submit their capabilities and the required contractor fillable form to the primary point of contact, Greg McMillan Sr., by 10:00 a.m. CST on October 16, 2026. The information gathered will be used to determine the feasibility of a competitive procurement and to make final acquisition decisions. Respondents will not be notified of the results of this market research, and the government assumes no commitment to pay for costs associated with the submission of information.

255-NETWORK Contract Office 15 (36C255)

POSTED

about 14 hours ago

DEADLINE

Barge #600 Hydraulic Lines Replacement for Missouri River Project Office (MRPO)

Solicitation # W9128F26QA097

Solicitation W9128F26QA097 is a firm-fixed-price request for proposals issued by the Department of Defense for the maintenance overhaul and replacement of the high-pressure hydraulic piping system on Equipment Barge #600. Located at the Missouri River Project Office in Omaha, Nebraska, the project requires the removal and replacement of both flexible lines inside the hull and rigid steel lines housed above deck. The scope of work includes draining and disposing of hydraulic fluid, furnishing new materials—specifically Schedule 160 seamless steel pipe and SAE 100R12 flexible lines—performing pressure testing at 3000 psi, and conducting necessary structural repairs such as cutting and patching access holes with ASTM A36 carbon structural steel. The period of performance is scheduled from November 15, 2026, through March 15, 2027. This is a total small business set-aside, and the government will award the contract to the offeror providing the best value, considering both price and past performance. Offerors must demonstrate experience by providing up to three projects of similar magnitude completed within the last five years. Due to the nature of the work, the contractor must adhere to strict safety protocols for permit-required confined spaces, complying with EM 385-1-1 and OSHA standards, and must maintain independent on-site rescue procedures. Key submittals required before work begins include a site-specific health and safety plan, a work plan, material certifications, and proof of insurance. Proposals must be submitted electronically to Grant Hibbs no later than September 18, 2026, at 2:00 PM local time. A site visit is scheduled for September 11, 2026, requiring RSVP and specific confined space documentation for barge access.

W071 Endist Omaha

POSTED

about 14 hours ago

DEADLINE

TURBOCHARGER EXHAUST LEFT

Solicitation # 70Z08026QDL062

The United States Coast Guard Surface Forces Logistics Center is soliciting quotations for the open, inspection, report, and possible overhaul of four left-side turbochargers, part number EX59610100196 and NSN 2950 12 390 5601. These components are used on 154 foot WPC vessel MTU 4000 series diesel engines. The requirement is a total small business set-aside under NAICS 811310, with an estimated total value of 57,057 dollars. The objective is to restore the units to a service ready condition in strict accordance with Original Equipment Manufacturer specifications from Rolls Royce Solutions GMBH. Substitute parts are not acceptable, and the contractor must use only OEM parts and procedures to ensure vessel safety and mission reliability. The contract is a firm fixed price award based on the lowest price technically acceptable offer. The contractor must provide a separate inspection fee and a firm fixed repair price per unit. Deliveries are required by December 20, 2026, F.O.B. Destination to the SFLC receiving room in Baltimore, Maryland. Strict preservation, packaging, and marking standards apply, including the use of ASTM D-3951 or ASTM-D6880 heavy duty wooden crates and marking in accordance with MIL-STD-129R. The contractor must guarantee the items against defects for 90 days after installation or up to two years after delivery. All offerors must be registered in SAM.gov and provide necessary representations and certifications.

Sflc Procurement Branch 1(00080)

POSTED

about 14 hours ago

DEADLINE

CATEGORY 5 SAFETY TEST ON THE TRACTION ELEVATOR U.S. ARMY CORPS OF ENGINEERS SAM RAYBURN POWER PLANT, JASPER, TEXAS

Solicitation # W9126G26QA125

W076 Endist Ft Worth

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Fletc Glynco Procurement Office

Same awarding agency

Oleoresin Capsicum (OC) Spray for FLETC, Glynco GA.

Solicitation # 70LGLY26QGLB00061

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 14 hours ago

DEADLINE

Generator OEM Parts and Lubricants SupplyThis subcontract for the Fletc Glynco Procurement Office under the Department of Homeland Security involves the supply of original manufacturer (OEM) or equivalent parts and lubricants for prime contractors working on projects at the FLETC Glynco facility in Brunswick, Georgia. The provider must ensure all materials are first quality, conform to original manufacturer designs and specifications, and are warranted against defects. The contract is designated as a total Small Business Set Aside under NAICS code 423830. The supplier is responsible for delivering all parts, materials, and necessary warranty documentation directly to the site or the prime contractor. The response deadline for this opportunity is September 18, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Annual Generator Load Bank TestingThis subcontract for the Department of Homeland Security involves performing annual load bank testing on portable and fixed standby generators at the FLETC Glynco facility in Brunswick, Georgia. The primary objective is to verify operational capacity by conducting tests strictly in accordance with NFPA 110 standards using equipment capable of meeting specific kVA/kW ratings. The selected provider must deliver detailed annual test reports documenting all results and observations. The opportunity is a total Small Business Set Aside under NAICS code 811310. Qualified technicians must possess NFPA 110 compliance expertise and obtain the necessary site security badging to perform the work. The procurement is managed by the FLETC Glynco Procurement Office, with a response deadline of September 18, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Generator Maintenance and Repair

Solicitation # 70LGLY26QGLB00058

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Aluminum Pedestrian Truss Bridge

Solicitation # FLETC26EOYTTO0014

Solicitation FLETC26EOYTTO0014 is a combined synopsis and request for quotation for the procurement of one new aluminum pedestrian truss bridge for the Federal Law Enforcement Training Center (FLETC) in Brunswick, Georgia. This firm-fixed-price contract is not set aside for small businesses and requires offerors to be registered in the System for Award Management. The bridge must be a marine-grade aluminum Howe Truss configuration with a mill finish, featuring a 42-inch high combination mid-railing and fall-prevention barrier, and high-traction aluminum plank decking. Technical requirements include certification to ASCE 7-05 for wind speeds of 110 mph, a uniform live load of 90 psf per IBC codes, and a structural rating for vehicles up to 2,500 lbs. Additionally, anchor bolt designs must be stamped by a licensed Professional Engineer. The government will evaluate offers based on price, technical acceptance, and the proposed delivery timeline. Shipping must be free on board (FOB) destination to the specified address in Brunswick, Georgia, with the seller assuming all costs and risk of loss until delivery. To be considered acceptable, offerors must submit a signed RFQ with the completed Technical Exhibit 1, an official company quote including their UEI and detailed pricing, a projected delivery timeline, and comprehensive technical drawings and specifications. Amendment 1 updated the closing date to September 18, 2026, added a Q&A attachment, and incorporated Buy American provisions. Awardees must also comply with regulations regarding the combating of trafficking in persons and the handling of controlled unclassified information.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

DHS - FLETC - GLYNCO - FENCE UPGRADE

Solicitation # 70LGLY26QSSB00077

Solicitation 70LGLY26QSSB00077 is a total small business set-aside for the upgrade and replacement of the front barrier perimeter fence at the Federal Law Enforcement Training Centers (FLETC) Glynco facility in Brunswick, Georgia. The project is driven by the need to comply with Executive Order 14111 and Interagency Security Committee (ISC) requirements, as the existing fencing is non-compliant with anti-climb, anti-scale, and anti-crash standards. The contractor must design and install a perimeter fence meeting ASTM F2656 M30/P1 crash ratings or better, including specific technical requirements for the sally port gate. The period of performance is established from September 30, 2026, to March 31, 2027, with a general 180-day timeline from the date of award. The award will be based on the most advantageous offer, weighing price equally against a combination of project experience, personnel, and past performance retrieved from CPARS. Key requirements include the submission of a bid guarantee of 20 percent of the bid amount or 3 million dollars, whichever is less, and the provision of performance and payment bonds within 10 days of award. Technical proposals are limited to 20 pages and must include resumes for key personnel, including a Project Manager, Superintendent, and Safety Manager. The scope of work involves phased installation to maintain perimeter security, strict adherence to Davis-Bacon wage determinations, and compliance with hazardous waste packaging and utility marking standards.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 16 hours

Building 93 Renovation

Solicitation # 70LGLY26RSSB00037

Solicitation 70LGLY26RSSB00037 is a request for a single firm fixed price contract for the renovation of Building 93 at the Federal Law Enforcement Training Center in Glynco, Georgia. The project is a 100 percent total small business set-aside under NAICS code 236220, with a construction magnitude estimated between 1 million and 5 million dollars. The scope of work includes comprehensive renovations to bathrooms, hallways, Suite 140, and Suite 160, involving demolition and replacement of concrete and carpet, installation of LVP flooring, sewer line replacement, new plumbing fixtures, painting, and HVAC testing and balancing. The period of performance is not to exceed 334 calendar days following the notice to proceed, with a scheduled performance window from September 30, 2026, to August 30, 2027. Award decisions will be based on a best suited then negotiate methodology, where price is of equal importance to non-cost factors, specifically past performance and corporate relevant experience. Offerors must achieve at least a satisfactory rating for past performance and an acceptable rating for corporate experience to be eligible. Proposals are due electronically by 11:00 AM Eastern Time on September 17, 2026. Key requirements include the submission of a non-disclosure agreement to access secure technical documents, the provision of performance and payment bonds, and compliance with the FLETC Hazardous Waste Management Plan. Additionally, the contract stipulates liquidated damages of 236.53 dollars per calendar day of delay and requires a quality control plan, including a key control system, to be approved five days before the contract start date.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 13 hours

Heavy Equipment Transport (Bridge Delivery)This subcontract involves the transport and delivery of a fabricated aluminum structural truss for prime contractors working on Federal Law Enforcement Training Centers projects. The selected provider will utilize flatbed or specialized heavy-haul trailers to move the equipment FOB destination to Brunswick, Georgia. The contract is managed by the Fletc Glynco Procurement Office under the Department of Homeland Security, falling under NAICS code 484220. All personnel assigned to the project must successfully complete FLETC physical access pre-screening and strictly adhere to all operational security requirements.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 16 hours

Marine-Grade LED Lighting SupplierThis subcontract opportunity through the Department of Homeland Security's FLETC Glynco Procurement Office involves the supply of fully integrated, mid-rail mounted LED lighting systems for prime contractors working on Federal Law Enforcement Training Centers projects. The required equipment consists of LED strips, fixtures, and power drivers housed in UV-resistant, marine-grade PVC casing to ensure adherence to strict marine-grade specifications. The contract is categorized under NAICS code 335122 and will be performed in Brunswick. Interested parties must respond by September 17, 2026, to provide the integrated lighting kits, including all necessary casing and power supplies.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

in about 16 hours

Aluminum Pedestrian Truss Bridge ManufacturerThis subcontract involves the design, fabrication, and supply of one aluminum pedestrian truss bridge for prime contractors working on Federal Law Enforcement Training Centers projects. The manufacturer is responsible for using structural aluminum and integrating a mid-rail mounted LED lighting system into the bridge design. The project is managed by the Fletc Glynco Procurement Office under the Department of Homeland Security. The selected provider must comply with FLETC OPSEC requirements and attend all necessary briefings. The final product is to be delivered FOB destination to Brunswick, Georgia.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 16 hours

Plumbing & Sewer Line ReplacementThis subcontract for the Department of Homeland Security's FLETC Glynco Procurement Office involves performing sewer line replacements and plumbing upgrades at the Federal Law Enforcement Training Center facility in Brunswick, Georgia. The scope of work includes replacing existing sewer lines and installing new piping and fixtures within bathrooms and suites to deliver fully functional systems. This is a total Small Business Set Aside under NAICS code 238220. Due to the nature of the facility, the contractor must adhere to strict site security protocols and comply with DHS Non-Disclosure Agreements. The response deadline for this opportunity is September 17, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 13 hours

Site Preparation & ExcavationThis subcontract for the Department of Homeland Security's FLETC Glynco Procurement Office involves providing excavation and site preparation services for prime contractors at the Federal Law Enforcement Training Center in Brunswick, Georgia. The scope of work focuses on general excavation and site preparation as specified in CLIN 0014 to ensure areas are ready for utility installation. Due to the nature of the facility, the contractor must adhere to strict site security protocols and comply with DHS Non-Disclosure Agreements. The opportunity is designated as a total Small Business Set Aside under NAICS code 238910. It was posted on September 4, 2026, with a response deadline of September 17, 2026.

Site Preparation Contractors

POSTED

DEADLINE

in about 13 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS