Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Boiler Combustion Analysis, Calibration, and Commissioning

Active

Federal

Response Deadline11/13/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract involves providing combustion analysis, calibration, and commissioning services for USCG facility projects located in Northport, New York. The scope of work focuses on eleven Weil-McLain EVG 299 boilers, requiring the contractor to utilize flue gas analyzers to verify readings at both low and high-fire conditions. Responsibilities include adjusting gas-valve and combustion settings, as well as verifying the ignition sequence, flame-signal, and safety controls to ensure full compliance with manufacturer specifications. Managed under the Department of Homeland Security's Base Boston agency, the project concludes with the delivery of fully commissioned boilers and detailed combustion reading reports. The solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026, falling under NAICS code 811310.

General Info

Combustion analysis, calibration, and commissioning for eleven USCG boilers in Northport, New York.

Agency

Department Of Homeland Security → Base Boston

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Northport, NY, 11768, USA

Set-Aside

SBA

Documents

This scope was carved out of 70Z02427QBOST001.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCG Station Eaton's Neck Boiler Combustion Analysis and calibration

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 06:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Base Boston

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → Base Boston

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs combustion analysis, calibration, and commissioning for prime contractors on USCG facility projects in Northport, NY. Places 11 Weil-McLain EVG 299 boilers in test mode, verifies readings at low and high-fire conditions using flue gas analyzers, and adjusts gas-valve and combustion settings. Verifies flame-signal, ignition sequence, and safety controls per manufacturer specifications. Delivers commissioned boilers and combustion reading reports.

Similar Contracts

Same NAICS industry code

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310, focusing on commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on November 2, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their responses through the official WMATA supplier portal by the specified cutoff time.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist and no cab or loader at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all transportation, labor, supervision, tools, and materials to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include disassembling the assembly, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. All work must be performed according to manufacturer specifications and verified through rigorous testing of clutch engagement and PTO operation under load. This is a small business set-aside opportunity under NAICS code 811310, with award based on best value. Interested offerors must submit a bid sheet, completed supplier packet including a W-9 and self-certification form, and proof of insurance by November 3, 2026. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31, Buy American requirements, and FAR clauses regarding the combating of trafficking in persons and equal opportunity for veterans. Final acceptance of the work is contingent upon inspection by the Facility Maintenance Department to ensure the tractor is restored to safe and reliable operating condition.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Assisted Bathing Equipment ServicingThis subcontract involves providing specialized maintenance and repair services for assisted bathing equipment for prime contractors working on Sheffield Teaching Hospitals NHS Foundation Trust projects. The scope of work includes inspecting mechanical lifts, pumps, and seals, as well as conducting essential leak tests and electrical safety checks. To ensure the delivery of fully operational and safety-certified equipment, the contractor must utilize specialized hydraulic and plumbing tools and possess documented experience with clinical bathing installations. The opportunity is categorized under NAICS code 811310 and was posted on November 2, 2026. Interested parties must submit their responses by the deadline of November 30, 2026, at 12:00 PM. This contract focuses on maintaining critical healthcare infrastructure to ensure patient safety and equipment reliability within the trust's facilities.

Sheffield Teaching Hospitals NHS Foundation Trust

POSTED

about 3 hours ago

DEADLINE

Water Meter Repair and Maintenance ServicesThis subcontract for Water Meter Repair and Maintenance Services involves providing ongoing technical support for prime contractors operating on Thames Water Utilities Limited facility projects. The scope of work centers on conducting field diagnostics, performing repairs on faulty meters, and executing preventative maintenance tasks utilizing specialized testing and calibration equipment to ensure all delivered meters are fully functioning. To qualify for this engagement, service providers must hold the necessary technical certifications specifically for water meter repair. The contract is categorized under NAICS code 811310 and is focused on maintaining the operational integrity of water metering infrastructure for the agency.

Thames Water Utilities Limited

POSTED

about 4 hours ago

DEADLINE

Elevator Maintenance - Montgomery Studio

Solicitation # SRC0000037503

Solicitation SRC0000037503 is for elevator maintenance services at the Montgomery Studio for the Educational Television Commission in Alabama. The opportunity was posted on November 2, 2026, with a response deadline of November 5, 2026. The contract is governed by the Quick Quote Standard Boilerplate and incorporates Division 4 of the Department of Finance Administrative Code. The total contract value is capped at 25,000 dollars, and the agreement may be renewed annually for up to five years, provided the total cost does not exceed the 25,000 dollar limit. Any approved price escalations are limited to 5 percent of the annual contract cost and must still fit within the overall budget ceiling. Award evaluation is based on pricing, cost realism, and price reasonableness, with the state reserving the right to request professional licenses, insurance certificates, and manufacturer authorizations after the bid opening. Compliance requirements include registration with the Alabama Secretary of State for foreign entities, enrollment in E-Verify for those with employees in Alabama, and certification of tax compliance under Section 41-4-142 of the Code of Alabama 1975. All responses must be submitted electronically via Alabama Buys. Payments will be made through electronic methods such as P-cards or EFT, and the city of Montgomery, Alabama, serves as the sole venue for any litigation or dispute resolution.

EDUCATIONAL TELEVISION COMM

POSTED

about 6 hours ago

DEADLINE

Generator Preventative Maintenance ContractThis subcontract opportunity is for a Generator Preventative Maintenance Contract supporting prime contractors on Facility Management projects within Lucas County, Ohio. The selected provider must be a manufacturer-authorized service representative capable of performing semi-annual maintenance services. All work must be conducted using manufacturer-authorized tools and diagnostics to ensure full compliance with existing warranty requirements. The contractor is responsible for delivering detailed semi-annual maintenance reports and ensuring documented system uptime. Interested parties should note that the response deadline is November 12, 2026, and the project falls under NAICS code 811310.

Lucas County, OH Facility Management

POSTED

about 7 hours ago

DEADLINE

AH-64 Non-Rotating Control Swashplate Assembly Liner Replacement

Solicitation # AP63B4-6246-6056

Solicitation W912NW27QA001 is a firm fixed price requirement for the refurbishment of 40 AH-64 Non-Rotating Control Swashplate assemblies, specifically part number 7-311527061. The scope of work involves the mandatory replacement of Teflon liners using the KAHR-LON X-1200S system and the application of proprietary Dicronite dry film lubrication to restore the assemblies to original operating condition. Due to the specialized nature of the liner system, the government has proposed a sole-source award to Sargent Aerospace & Defense, LLC, the approved original equipment manufacturer. The period of performance is scheduled from November 19, 2026, to November 18, 2027, with a required turnaround time of 20 weeks from the receipt of assets. Work will be performed at the contractor's facility, with final inspection and acceptance conducted by the Directorate of Quality Assurance at the Corpus Christi Army Depot in Texas. The contractor is required to provide a Certificate of Conformance and record all serial numbers on receipts. Invoicing must be processed through the Wide Area Work Flow database. Award will be based on the lowest price from a responsible offeror.

W6QK Ccad Contr Office

POSTED

about 8 hours ago

DEADLINE

J061--586-Switchgear and ATS Investigation and Repair Service (VA-27-00015294)

Solicitation # 36C25627Q0085

The Department of Veterans Affairs, Network Contracting Office 16, is soliciting offers for a firm-fixed-price contract to provide investigation and repair services for malfunctioning switchgear and Automatic Transfer Switch (ATS) systems at the G.V. Sonny Montgomery VA Medical Center in Jackson, Mississippi. This procurement is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The scope of work includes the inspection and evaluation of GE Main switchgear, ABB Distribution switchgear, and ASCO ATS units, followed by necessary repairs such as replacing trip/close coils, repairing MOC/TOC blocks, and performing functional testing. Key deliverables include an investigation report, a repair completion report, an updated device condition log, and reliability recommendations. The contract will be awarded based on the Lowest Priced Technically Acceptable (LPTA) procedure. To be considered technically acceptable, offerors must provide a capability statement demonstrating expertise with the specified equipment and a list of three similar projects completed within the last three years. Proposals must be submitted via email to Vanessa Williams by November 18, 2026, at 4:00 P.M. CST. Required submission documents include a signed SF 1449, a Price/Cost Schedule, and the VAAR Clause 852.219-75 certificate of compliance. Work is a one-time service that must be performed during scheduled outages, including required after-hours and weekend work, in accordance with OSHA and Joint Commission standards.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 8 hours ago

DEADLINE

FIRE EXTINGUISHER INSPECTION, MAINTENANCE, RECHARGE, REPAIR, HYDROSTATIC TESTING

Solicitation # W5S09H27QA991

Solicitation W50S9H27QA991 is a total small business set-aside for a five-year Blanket Purchase Agreement to provide portable fire extinguisher inspection, maintenance, recharge, repair, and hydrostatic testing services for the Volk Field Air National Guard Base in Camp Douglas, Wisconsin. The anticipated period of performance runs from December 15, 2026, to December 14, 2031. The contractor is responsible for all management, labor, equipment, and transportation required to pick up extinguishers, perform necessary services at their place of business, and return them to the base. All work must comply with the most current edition of NFPA 10, manufacturer specifications, 49 CFR, and DOT/PHMSA regulations, as well as Wisconsin local environmental laws. The government will award a single BPA based on the lowest price, without discussions. Offerors must be registered in the System for Award Management and submit their quotes via email by December 2, 2026, at 1:00 PM CST. Required deliverables include the completion of a Vendor Pricing Worksheet covering routine maintenance and hydrostatic testing for various extinguisher sizes, ranging from 5 lb to 2000 lb units. The contract requires a minimum 180-calendar-day warranty on parts and labor. Invoicing is permitted only after services are completed, extinguishers are returned, and all required documentation and manifests have been submitted.

W7N8 Uspfo Activity Wiang Crtc

POSTED

about 8 hours ago

DEADLINE

Campbell VTG PM, Evaluation, Repair

Solicitation # N68520-27-RFPREQ-KN00000-0138

Fleet Readiness Center

POSTED

about 8 hours ago

DEADLINE

Inspection, Maintenance, Repair, And Replacement Services for PATH’s Emergency Ventilation Fans-(3) Three-Year Contract

Solicitation # 2140472

The Port Authority of New York and New Jersey is soliciting bids under solicitation number 6000003547 for a three-year contract focused on the inspection, maintenance, repair, and replacement services for PATH’s emergency ventilation fans. This procurement falls under NIGP code 94155 for HVAC systems maintenance and repair of power plants. The project will be performed state-wide in New York, and the agency has scheduled a pre-bid meeting via Microsoft Teams on November 5, 2026, to discuss the specific requirements and solicitation documents. Bids must be submitted electronically through the Euna portal, with conflicting deadlines listed as November 17, 2026, and November 24, 2026. The procurement process is governed by Title VI of the Civil Rights Act of 1964, ensuring full and fair opportunity and non-discrimination based on race, color, national origin, age, or disability. Administrative inquiries and submissions are handled by the Procurement Operations Bid/RFP Custodian located at 150 Greenwich Street, 21st Floor, New York, New York 10007.

The Port Authority of New York and New Jersey

POSTED

about 15 hours ago

DEADLINE

Vehicle Armoring and Ballistic IntegrationThis subcontract involves providing specialized vehicle armoring and ballistic integration services for prime contractors supporting Oil and Gas Development Company Limited security projects in Lakki Marwat, KPK, Pakistan. The scope of work includes stripping vehicle interiors to install ballistic steel or composite armor plates within the doors, pillars, and floors, as well as reinforcing braking and suspension systems to accommodate the additional weight of the armor. The contractor is required to deliver fully road-worthy vehicles that adhere to international ballistic standards and comply with PPRA rules. Interested parties must respond by November 16, 2026, to fulfill these technical requirements under NAICS code 811310.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Base Boston

Same awarding agency

USCG Station Eaton's Neck Boiler Combustion Analysis and calibration

Solicitation # 70Z02427QBOST001

This project involves providing combustion analysis, calibration, and commissioning services for eleven Weil-McLain EVG 299 boilers and associated AQUA PLUS 55 S2 hot water storage tanks at the U.S. Coast Guard Station Eaton’s Neck housing complex in Northport, New York. The primary objective is to verify and adjust combustion settings at both low-fire and high-fire conditions according to manufacturer specifications to ensure safe and efficient operation. The contractor is required to inspect combustion-air intake and venting, document all readings before and after adjustments, and identify any equipment requiring repairs beyond the immediate scope of work. The performance period for site visits is scheduled for November 3 through November 6, 2026, and November 9 through November 10, 2026, between 8 AM and 3 PM EST, with coordination required through DC1 Michael Bush. This is a total small business set-aside under NAICS code 238220. All work must adhere to OSHA safety standards and EPA waste disposal regulations. Invoicing must be processed through the Invoice Processing Platform using the routing code CEU-MIAMI and must include the contractor's Unique Entity Identifier. The project is managed by the Department of Homeland Security's Base Boston office.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 8 hours ago

DEADLINE

Vessel Fuel and Endurance SupportThe Vessel Fuel and Endurance Support subcontract involves the supply of marine fuel and provisions for prime contractors operating on USCG Base Boston projects. The scope of work requires the coordination of fuel deliveries via barges or shoreside infrastructure across Massachusetts, Rhode Island, and Connecticut to support icebreaking vessels during continuous seven-day operational windows. The contractor must ensure that all fuel meets strict specifications for high-load engines and maintains full environmental compliance during transfers within protected waterways. Deliveries of fuel and provisions are to be made to designated ports under the oversight of the Department of Homeland Security.

Petroleum Bulk Stations and Terminals

POSTED

DEADLINE

Icebreaking Vessel Services (4" to 18" Ice)This subcontract involves providing active icebreaking services for prime contractors supporting USCG Base Boston projects. The scope of work focuses on maintaining commercial shipping channels and clearing ice jams to prevent flooding within Boston Harbor, the Cape Cod Canal, and various ports across Massachusetts, Rhode Island, and Connecticut. The contractor must utilize U.S.-flagged, Jones Act compliant vessels specifically reinforced to handle ice thickness ranging from 4 to 18 inches. Essential requirements include a valid USCG Certificate of Inspection and a qualified crew to ensure the delivery of operational channel maintenance and emergency response capabilities.

Automotive Transmission Repair

POSTED

DEADLINE

Northeast Ice-Breaking

Solicitation # RFI_Northeast_Ice_Breaking

The United States Coast Guard is issuing a Request for Information to identify commercially available icebreaking capabilities to support emergent domestic operations within the Coast Guard District Northeast area of responsibility. The primary objective is to maintain a safe Marine Transportation System for Northeast ports, facilitate the movement of critical cargo, and mitigate navigational risks such as ice jams that could cause localized flooding. The government is specifically seeking U.S.-flag, coastwise-qualified vessels under the Jones Act that hold a valid USCG Certificate of Inspection. Required operational capabilities include the ability to break ice ranging from 4 to 18 inches, with vessels available for up to 12 hours per day during daylight hours. The scope of performance covers various waterways in Massachusetts, Rhode Island, and Connecticut, with a required mobilization date of January 2, 2027. The USCG anticipates providing a 72-hour notification for services and a minimum 7-day window for continuous support. This is a sources-sought RFI for market research and planning purposes under NAICS code 488330; it is not a formal solicitation, and no contract will be awarded directly from this announcement. Interested parties must submit their responses in Word or PDF format to the primary points of contact, Brady Gariano and Jeff Center, by November 13, 2026. Responses should include detailed company and vessel information, operational capabilities, and optional non-binding pricing to assist in government planning.

Navigational Services to Shipping

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Maintenance of Fire Suppression System for HAZMAT lockers (Yokosuka Naval Base)

Solicitation # N6264927QB005

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

in about 1 year

MIL-STD-1330D Oxygen Cleaning Services

Defense Logistics Agency

POSTED

DEADLINE

MTU Diesel Engine Maintenance and Repair

0906 Aq Co Det B Contracti

POSTED

DEADLINE

Euro-Diesel DRUPS Preventive & Corrective Maintenance

0906 Aq Co Det B Contracti

POSTED

DEADLINE

Tote Conveyor System Technical Support

National Cmop Office (36C770)

POSTED

DEADLINE

Automated Pharmacy Equipment Technical Support

National Cmop Office (36C770)

POSTED

DEADLINE

Warehouse Equipment Maintenance

Defense Commissary Agency- Eur Area

POSTED

DEADLINE

Industrial Kitchen & Food Service Equipment Repair

Defense Commissary Agency- Eur Area

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS