Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Generator Preventative Maintenance & Repair Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Generator Preventative Maintenance and Repair Services supports prime contractors on facility projects at the Army Contracting Command-Watervliet Arsenal. The scope of work includes annual preventative maintenance and corrective repairs, specifically involving the replacement of lubricating oil, filters, and belts, as well as the inspection of fuel lines and cooling systems. Technical requirements include performing functional checks and electrical frequency analysis on Automatic Transfer Switches and Generator Ends, with all work adhering to WAIC and NFPA 110 standards. The selected provider is responsible for delivering detailed Inspection Reports and Estimate of Repair Cost Reports. This opportunity falls under NAICS code 811310 and is managed by the Department of Defense under the agency W6QK Acc Wva. The performance location is situated in Watervliet, New York, with a response deadline of September 21, 2026.

General Info

Generator maintenance and repair services for Army Contracting Command-Watervliet Arsenal by September 2026.

Agency

Department Of Defense → W6QK Acc WvaView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Watervliet, NY, 12189, USA

Set-Aside

NONE

Documents

This scope was carved out of W911PT-26-Q-A150.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Generators Maintenance Contract for Base + 2 option years at the Watervliet Arsenal, NY 12189.

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Wva
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W6QK Acc Wva
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs annual preventative maintenance and corrective repairs for prime contractors on Army Contracting Command-Watervliet Arsenal facility projects. Changes lubricating oil, filters, and belts; inspects cooling systems and fuel lines; performs electrical frequency analysis and functional checks of Generator Ends and Automatic Transfer Switches (ATS). Work must comply with NFPA 110 and WAIC. Delivers Inspection Reports and Estimate of Repair Cost Reports.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
Federal
81--CYLINDER,COMPRESSED, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QSC29
This presolicitation contract, issued by the Department of Defense under Navsup Weapon Systems Support, is for the repair or modification of 40 compressed cylinders identified by NSN 7R-8120-016571545-P8. The requirement specifies the use of TDP Version 002 and stipulates that delivery will be handled FOB Origin. The solicitation, numbered N0038326QSC29, was posted on September 16, 2026, with a response deadline of November 2, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact for this requirement is Sarah L. Austin.
Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811310
New
Federal
RFQ - Uninterruptible Power Supply (UPS) Units Maintenance and Repair Support Services
Solicitation # PANAPG-26-Q-0UPS
W6QK Acc-Apg

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811310
New
Federal
CATEGORY 5 SAFETY TEST ON THE TRACTION ELEVATOR U.S. ARMY CORPS OF ENGINEERS SAM RAYBURN POWER PLANT, JASPER, TEXAS
Solicitation # W9126G26QA125
W076 Endist Ft Worth

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 811310
New
RFQ#3857 Replace Walk-In Cooler and Freezer Doors
Solicitation # RFQ#3857
Management & Training Corporation (MTC) is soliciting bids under RFQ#3857 for a subcontracting opportunity to replace three walk-in refrigeration doors at the Charleston Job Corps Center in Charleston, West Virginia. The scope of work requires the contractor to provide all labor, materials, and supervision to remove and dispose of existing doors and install one walk-in cooler door and two walk-in freezer doors. The project includes the installation of all necessary hardware, such as hinges, latches, gaskets, and thresholds, ensuring airtight sealing and proper alignment. Deliverables include the fully operational doors and a minimum one-year workmanship warranty along with manufacturer certificates. This is a lump sum fee contract open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must submit their proposals via email by September 28, 2026, at 3:00 PM EST. Required submission documents include a bid sheet, a completed supplier packet with IRS W-9 and self-certification forms, proof of insurance, and three references for similar projects. Award selection is based on best value as determined by MTC. The contractor must comply with OSHA safety requirements, the Buy American Act, and Service Contract Labor Standards under Wage Determination 2015-4347. Invoicing is to be submitted on a weekly or bi-weekly basis and must include a valid purchase order number.
Management & Training Corporation

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 811310
New
SLED
EV Charging Station Operation and MaintenanceThis subcontract for the City of San Antonio Department of Resilience and Sustainability involves the ongoing operation and maintenance of installed electric vehicle charging equipment. The selected provider will be responsible for performing routine inspections, preventative maintenance, hardware repairs, and software updates utilizing specialized EVSE diagnostic tools to ensure the delivery of operational charging stations and detailed O&M reports. The project requires the use of certified EVSE technicians to execute these services. This opportunity was posted on September 16, 2026, with a response deadline of September 29, 2026. It falls under NAICS code 811310 and is intended for prime contractors managing city projects.
CITY OF SAN ANTONIO

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 811310
New
SLED
IFB #26C625002 CHP El Centro Area office - Automatic Gate and Roll-Up Door Maintenance Services
Solicitation # 26C625002
The Department of the California Highway Patrol (CHP) is soliciting bids under IFB 26C625002 for automatic gate and roll-up door maintenance services at the El Centro Area office. The anticipated contract term runs from April 1, 2027, to March 31, 2030. The scope of work requires the contractor to perform quarterly maintenance every ninety days for three automatic gates and four roll-up doors, including the provision of all necessary supplies such as belts, cleaning chemicals, oil, grease, switches, and fuses. A mandatory walk-through was scheduled for September 23, 2026, and the final response deadline is October 7, 2026. To be eligible, contractors must possess a valid California Contractor’s State License Board C-61/D-28 Doors, Gates and Activating Devices License and be registered with the Department of Industrial Relations (DIR) in compliance with prevailing wage laws. The agreement will be awarded to the responsive and responsible bidder offering the lowest cost, with potential price adjustments for Small Business, Micro-business, or Disabled Veteran Business Enterprise (DVBE) preferences. While the DVBE participation requirement has been waived, incentives remain available for those who utilize certified DVBE participation. Submission requirements are strict, requiring a single original physical bid package delivered via mail or hand delivery, labeled specifically as Do Not Open. Bidders must include all required certifications, including the Bidder Declaration, Conflict of Interest and Confidentiality Statement, and proof of liability insurance. Personnel assigned to the contract must undergo security clearance and driver license checks. All work must adhere to industry standards and applicable building, plumbing, and electrical codes, as well as the Americans with Disabilities Act of 1990.
Department of the California Highway Patrol

POSTED

about 17 hours ago

DEADLINE

in 21 days
View Details
NAICS: 811310
New
SLED
Automotive Lifts - Inspection, Maintenance and Repair
Solicitation # IFB-26-FSD-0291
The City of Phoenix Public Works department is soliciting sealed bids under IFB-26-FSD-0291 for a contract to provide certified annual inspections, maintenance, and as-needed repairs for automotive lifts across 13 various City Fleet Services locations. The contract features an initial three-year term commencing around November 1, 2026, with two optional one-year extensions for a total potential duration of five years. The award will be granted to the lowest responsive and responsible offeror, with the City reserving the flexibility to award by individual line items, group, or all-or-none. The scope of work requires adherence to ANSI/ALI ALIS: 2022 standards and OEM specifications. Key deliverables include providing inspection reports and detailed spreadsheets within three business days of service, as well as placing inspection stickers on equipment. The contractor must respond to service calls within two business hours and return equipment to service within three business days of notification. Pricing is firm and fixed for the first year, with annual increases considered upon 60 days' notice. Compliance requirements are stringent, including mandatory submissions of heat safety compliance, conflict of interest, and debarment certifications. For aviation-related work, contractors must sign a Sensitive Security Information Acknowledgement Form and adhere to supplemental airport terms and FAA grant assurances. All hazardous materials must be labeled per OSHA and NFPA standards. Payment is processed based on invoices accompanied by signed delivery or service tickets.
Public Works

POSTED

about 19 hours ago

DEADLINE

in 28 days
View Details
NAICS: 811310
New
International
Commercial Kitchen Equipment Maintenance and RepairThe Commercial Kitchen Equipment Maintenance and Repair subcontract involves providing preventative maintenance and emergency repairs for industrial ovens, refrigerators, and dishwashers on Educo school catering projects. The selected provider will be responsible for conducting scheduled inspections and troubleshooting electrical and mechanical failures using specialized diagnostic tools, ensuring all equipment is fully maintained and documented through detailed maintenance logs. To qualify for this contract, providers must hold Gas Safe registration and relevant electrical certifications. This opportunity was posted on September 15, 2026, with a response deadline of October 21, 2026. The work falls under NAICS code 811310 and is managed by Educo.
Educo

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
SLED
Aquatic Systems Repair and Emergency ServicesThe Aquatic Systems Repair and Emergency Services subcontract involves performing technical repairs on pool filtration, pumping, and chemical delivery systems for prime contractors working on City of Decatur aquatic facility projects. The scope of work includes replacing chemical lines and pump room equipment, as well as providing hourly emergency repair services to address system failures. The ultimate goal is the delivery of fully repaired and functional pool mechanical systems. To qualify for this engagement, service providers must hold professional mechanical licenses specifically for technical pool equipment repair. This opportunity was posted on September 15, 2026, with a response deadline of October 9, 2026. The project falls under NAICS code 811310 and is managed through the City of Decatur in Georgia.
City of Decatur

POSTED

about 22 hours ago

DEADLINE

in 23 days
View Details
NAICS: 811310
New
International
Mechanical Servicing of Generating PlantsThis subcontract involves the mechanical servicing of power generating plants for prime contractors working on National Land Agency projects in Kingston. The scope of work includes the upkeep, tuning, and repair of generating plant engines and mechanical components, utilizing industrial generator diagnostic equipment to ensure all plants are fully operational. The contract is issued by the Government of Jamaica under NAICS code 811310. Qualified providers must possess mechanical engineering credentials to deliver these specialized technical services.
National Land Agency

POSTED

about 22 hours ago

DEADLINE

N/A
View Details
NAICS: 811310
New
International
Servicing and Maintenance of Generating Plants at Land Titles Division and Surveys and Mapping Complex located at 93 Hanover Street and 23 ½ Charles Street, Kingston
Solicitation # GOJEP-10166905
National Land Agency

POSTED

about 22 hours ago

DEADLINE

N/A
View Details
NAICS: 811310
New
SLED
JWCE Grinder Technical Services (Maintenance, Inspection, and Repair)This subcontract for the City of Atlanta involves providing specialized technical services for JWC Environmental grinders on Department of Watershed projects. The scope of work includes performing comprehensive maintenance, inspections, and repairs, as well as the physical replacement of failed units using industrial diagnostic equipment. To ensure quality and compliance, the contractor must hold the required technical certifications to service JWCE equipment and is responsible for delivering fully operational systems along with detailed repair logs. The opportunity is categorized under NAICS code 811310 and was posted on September 15, 2026, with a response deadline of September 25, 2026. This engagement is designed for providers capable of supporting prime contractors through scheduled preventative maintenance and the mechanical repair of malfunctioning units within the Georgia region.
City of Atlanta

POSTED

about 23 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → W6QK Acc Wva

Same awarding agency

NAICS: 541715
New
Federal
U.S. Army Contracting Command – Watervliet Arsenal (ACC-WVA) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)
Solicitation # W911PT26SC001
The U.S. Army Contracting Command – Watervliet Arsenal (ACC-WVA) is utilizing a Commercial Solutions Opening (CSO) under solicitation W911PT26SC001 to acquire innovative commercial products, technologies, and services to modernize its Organic Industrial Base. This competitive process, authorized by the National Defense Authorization Act for Fiscal Year 2026 and DFARS Subpart 212.70, is continuously open until September 30, 2027. The primary objective is to implement convergent manufacturing by integrating advanced manufacturing, digital twins, automation, and cybersecurity to enhance the seamless integration of manufacturing resources across the enterprise. The acquisition process follows a multi-phased approach consisting of a written solution brief, an optional presentation or pitch, and a final Commercial Solution Proposal. Awards will be made as fixed-price contracts under FAR Part 12 Commercial Item Procedures. Specific Areas of Interest (AoIs) have been identified, including advanced cannon technology, ultrasonic test inspection equipment, electrical infrastructure improvements at Building 120, chromium plating facility conversion, electronic access control systems for Benet Laboratories, automated manufacturing of minor components, and automated cooling tower treatments. Eligible respondents must be registered in the System for Award Management (SAM) and possess a Unique Entity ID. The government welcomes submissions from traditional and non-traditional defense contractors, including small businesses and foreign-owned entities, provided they meet responsibility and clearance requirements. Most efforts are expected to have a period of performance not exceeding 12 months. Evaluation is based on technical merit, responsiveness to the specific AoI, and price reasonableness, with all submissions required to remain unclassified.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 3 hours ago

DEADLINE

in about 1 year
View Details
NAICS: 611519
New
Federal
Cable Splicing &Terminating Training: On Site at Watervliet Arsenal (WVA) NY
Solicitation # W911PT-26-Q-A153
Other Technical and Trade Schools

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
Federal
NDT Inspection and Certification for Cannon LeversThis subcontract involves providing non-destructive testing services for manufactured cannon levers on projects at the Watervliet Arsenal for the Department of Defense. The selected contractor will perform Magnetic Particle, Dye Penetrant, or Ultrasonic testing to verify structural integrity according to specific technical requirements. Key deliverables include NDT Certification and Data Reports, as well as Certificates of Conformance for NDT Applications in compliance with DI-MISC-80678 and QAP-APPX-WVA. The opportunity is designated as a total Small Business Set Aside under NAICS code 541380. Performance will take place in Watervliet, New York. Interested parties must respond by September 29, 2026, to be considered for this specialized inspection and certification role.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 331110
New
Federal
Supply of Specialized Steel/Forgings for Cannon ComponentsThis subcontract, managed by the Department of Defense for the Watervliet Arsenal, involves the sourcing and delivery of high-grade alloy steel and rough forgings for cannon components. The supplier is required to adhere to the specific types of steel outlined in Section C and Drawing 11582517, ensuring all materials meet strict technical specifications. Additionally, the contractor must provide Certified Test Reports for all materials in accordance with DI-MISC-80678. The opportunity is designated as a total Small Business Set Aside under NAICS code 331110. Performance will take place in Watervliet, New York. Interested parties must respond by September 29, 2026, to be considered for the supply of these specialized materials.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332710
New
Federal
Manufacturing of Lever, Operating Sear (105MM M20 Cannon)This subcontract with the Department of Defense involves the manufacturing of 69 precision metal Operating Sear levers for the 105MM M20 Cannon. The work is performed for prime contractors on Watervliet Arsenal projects and requires the use of CNC milling and turning equipment to fabricate parts from a specific alloy steel according to Drawing 11582517, Revision A. The contractor is responsible for producing First Article samples for approval and must provide all necessary Certified Test Reports and Certificates of Conformance. This opportunity is designated as a total Small Business Set Aside under NAICS code 332710, with performance taking place in Watervliet, New York.
Machine Shops

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 423910
New
Federal
Generator Parts & Consumables SupplyThis subcontract under the Department of Defense involves the supply of generator parts and consumables for prime contractors operating at the Army Contracting Command-Watervliet Arsenal facility. The scope of work includes providing essential materials such as lubricating oils, oil and air filters, fuel pump gaskets, breakers, feeders, and wiring, all of which must be delivered with the corresponding manufacturer descriptions and catalog data sheets. All supplied materials are required to comply with the DoD Green Procurement Program, specifically regarding biobased products and recycled content. The project is categorized under NAICS code 423910 and is centered in Watervliet, New York.
Sporting and Recreational Goods and Supplies Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 811310
New
Federal
Load Bank Testing ServicesThis subcontract for Load Bank Testing Services involves performing specialized load testing for prime contractors at the Army Contracting Command-Watervliet Arsenal facility. The scope of work requires executing four-hour extended baseline load bank tests at increments of 50, 75, and 90 percent using industrial load bank equipment. All activities must strictly comply with NFPA 110 standards, and the contractor is responsible for delivering a Generator Test Report that documents all recorded performance values. The opportunity is managed by the Department of Defense under the agency W6QK Acc Wva, with the place of performance located in Watervliet, New York. The project falls under NAICS code 811310. Interested parties must note the response deadline of September 21, 2026, at 2:00 PM.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 332710
New
Federal
Lever, Operating Sear, per Drawing # 11582517, Revision A, for 105MM M20 Cannon, for the Watervliet Arsenal
Solicitation # W911PT26QA152
Solicitation W911PT26QA152 is a firm-fixed-price request for quotation issued on September 15, 2026, by the Watervliet Arsenal for the procurement of 69 Operating Sear Levers for the 105MM M20 Cannon. The items must be manufactured according to Drawing 11582517, Revision A, and comply with general cannon specification MIL-C-13931. This is a total small business set-aside. The government intends to make a single award based on the lowest evaluated offer that meets all material, technical, and responsibility criteria. The contract includes specific quality and delivery requirements, including the potential for first article testing. If required, the contractor must deliver one unit with and one unit without a protective finish within 120 calendar days of the award for 100 percent inspection. Production quantities are due either 60 days after first article approval or 150 days after the receipt of the order. All items must feature unique item identifiers conforming to MIL-STD-130 and be labeled per MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The contractor is responsible for all transportation costs to the destination in Watervliet, New York. Due to the nature of the hardware, the contract is subject to ITAR and Arms Export Control Act restrictions, and offerors must have a current DD 2345 certification on file with the Defense Logistics Information Service to access technical data packages. Evaluation may also include SPRS risk assessments regarding item performance and supplier quality.
Machine Shops

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 811310
New
Federal
Generators Maintenance Contract for Base + 2 option years at the Watervliet Arsenal, NY 12189.
Solicitation # W911PT-26-Q-A150
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 541380
New
Federal
NDT Inspection and Technique Sheet CertificationThis subcontract, issued by the Department of Defense for the Watervliet Arsenal, requires the performance of Non-Destructive Testing services for prime contractors. The scope of work focuses on Magnetic Particle Inspection utilizing wet fluorescent or dry particles, with magnetization achieved through head shots, coil prods, or yoke cable wraps. Technical requirements include measuring gauss readings between 30 and 60 using QQI or Hall Effect Probes in accordance with QAP-APPX-WVA, with the final deliverables consisting of certified technique sheets and detailed inspection reports. The opportunity is designated as a total small business set-aside under NAICS code 541380. Performance will take place in Watervliet, New York. Interested parties must respond by the deadline of September 24, 2026.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 332813
New
Federal
Protective Finish Application for Artillery ExtractorsThis subcontract, issued by the Department of Defense for the Watervliet Arsenal, involves the application of protective finishes and coatings for artillery extractor units. The selected provider will perform plating and coating services using industrial plating tanks in strict accordance with Drawing 12591497 and the established Quality Assurance Plan. Each submission must be accompanied by a Certificate of Conformance that references the specific plating characteristics of the units. The opportunity is designated as a total Small Business Set Aside under NAICS code 332813. Performance will take place in Watervliet, New York, with a response deadline of September 24, 2026.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
Federal
Fabrication of Artillery Cartridge ExtractorsThis subcontract with the Department of Defense involves the manufacture of 64 left artillery cartridge extractors for prime contractors on Watervliet Arsenal projects. The scope of work includes precision machining according to Drawing 12591497, Rev. B, and the fabrication of Special Inspection Equipment as specified in Drawing 12521140. Production will utilize CNC machining centers and must strictly adhere to quality assurance protocols outlined in QAP Appendix-BL and Appendix-WVA, including the provision of First Article Testing for two units. The project is designated as a total Small Business Set Aside under NAICS code 332710. Performance will take place in Watervliet, New York, under the agency oversight of W6QK Acc Wva. The contract was posted on September 14, 2026, with a response deadline of September 24, 2026.
Machine Shops

POSTED

2 days ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS