Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Antenna System Repair and Overhaul

Active

Response Deadline11/04/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Antenna System Repair and Overhaul supports the Department of the Navy through Navsup Weapon Systems Support Mech. The scope of work involves the technical repair and restoration of antenna units for prime contractors, including disassembly, diagnostic testing, and the replacement of faulty RF components. All work must ensure strict compliance with MIL-STD-130 and UID requirements, with additional support provided for Government Source Inspection to verify processes. The project is categorized under NAICS code 811212 and will be performed in Mechanicsburg, Pennsylvania. The final deliverable is a fully repaired and tested antenna unit delivered to consignee W25G1U. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

General Info

Navy subcontract for antenna repair and overhaul in Mechanicsburg, Pennsylvania per MIL-STD-130.

Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

NAICS

811212 - Computer and Office Machine Repair and Maintenance

Place of Performance

MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

NONE

Documents

This scope was carved out of N0010427QQA03.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ANTENNA — 5985016875445 — N0010427QQA03

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 09:30:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical repair and restoration of antenna units for prime contractors on Department of the Navy projects. Disassembles and diagnostically tests units, replaces faulty RF components, and ensures compliance with MIL-STD-130 and UID requirements. Supports Government Source Inspection (GSI) for process verification. Delivers a fully repaired and tested antenna unit to consignee W25G1U.

Similar Contracts

Same NAICS industry code

Vsign Hardware Maintenance and SupportThis subcontract for Vsign Hardware Maintenance and Support involves providing technical support and maintenance for Vsign-related hardware on Alabama Department of Transportation projects. The selected contractor will be responsible for conducting routine maintenance, troubleshooting, and repairing hardware components at CCS sites to ensure maximum operational availability. A critical requirement for this engagement is that the provider must hold manufacturer certification for hardware repair. The primary objective of the contract is the delivery of fully maintained and operational Vsign hardware. This opportunity is categorized under NAICS code 811212 and is associated with the Alabama Department of Transportation, G15 Transportation Planning.

Alabama Department of Transportation, G15 Transportation Planning

POSTED

about 4 hours ago

DEADLINE

Power Supply Repair and Modification ServicesThis subcontract for Power Supply Repair and Modification Services involves the teardown, evaluation, and functional repair of Power Supply units with NIIN 015205554 for Department of Defense prime contractors. The scope of work includes conducting diagnostic evaluations, repairing internal circuitry, and testing units in accordance with CAGE Code 49956 and Reference Number G638188-6. Additionally, the contractor must apply physical identification markings following MIL-STD-130, REV N, and utilize specialized electronic diagnostic tools and soldering stations to deliver fully functional units. Managed by the Navsup Weapon Systems Support Mech under NAICS code 811212, the opportunity was posted on October 21, 2026, with a response deadline of November 6, 2026. The contract focuses on technical precision and adherence to military standards to ensure the operational readiness of critical power supply components.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

ICT Desktop & Workstation SupportThis subcontract opportunity, titled ICT Desktop and Workstation Support, is issued by the Department of Homeland Security's Information Technology Contracting Division to provide technical assistance for prime contractors on Customs and Border Protection projects. The scope of work focuses on the maintenance and administration of ICT components, specifically involving desktop and workstation support, system administration for NII/RDE systems, and password reset services to ensure restored workstation access and operational interfaces. The project mandates strict adherence to Section 508 Compliance and NIST SP 800-53 Revision 4 security controls to maintain system integrity and accessibility. Classified under NAICS code 811212, the solicitation was posted on October 21, 2026, with a response deadline of October 30, 2026.

Information Technology Contracting Division

POSTED

about 8 hours ago

DEADLINE

Print Fleet Maintenance and Repair ServicesThe Print Fleet Maintenance and Repair Services subcontract involves providing comprehensive technical support for the City of Tustin Managed Print Services projects. The selected provider will be responsible for on-site field service, preventive maintenance, and the repair of the print fleet to ensure strict adherence to SLA uptime requirements. Key deliverables include remote troubleshooting, help desk support, and the physical replacement of parts. To qualify for this engagement, the contractor must utilize manufacturer-certified technicians and provide detailed service incident reports. This opportunity is categorized under NAICS code 811212 and is managed through the City Clerk. Interested parties must submit their responses by the deadline of November 18, 2026.

POSTED

DEADLINE

Medical Equipment Repair and MaintenanceThis subcontract for Medical Equipment Repair and Maintenance involves providing technical support for community equipment used in Sheffield City Council health projects. The selected provider will work under prime contractors to perform routine servicing, corrective repairs, and preventative maintenance. Utilizing technical diagnostic tools and replacement parts, the contractor is responsible for ensuring all maintained equipment meets strict safety specifications. The opportunity was posted on October 20, 2026, with a response deadline of November 20, 2026. Classified under NAICS code 811212, the contract is managed by the Sheffield City Council. Interested parties can find further details through the official tender notice.

Sheffield City Council

POSTED

DEADLINE

Control-Display Unit (CDU) Repair and Overhaul ServicesThis subcontract, issued by Navsup Weapon Systems Support under the Department of Defense, involves the technical tear-down, evaluation, and repair of the Control-Display Unit (NSN 6110-016477412). The scope of work focuses on internal circuitry repair, modification, and testing for part number 822-2463-001 using specialized diagnostic equipment to ensure the delivery of a certified Ready for Issue unit. The project requires strict adherence to Buy American and Balance of Payments Program standards. Interested parties must note that the response deadline is November 19, 2026, and the services fall under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

DEADLINE

Digital Computer Repair & Component-Level ModificationThis subcontract, issued by Navsup Weapon Systems Support under the Department of Defense, involves the technical repair and component-level modification of a specific digital computer, NSN 1680-01-541-3692 RV. The scope of work requires the contractor to perform a complete unit teardown, evaluate the hardware against technical requirements, and execute necessary modifications to restore full functionality. These tasks must be completed using specialized jigs, fixtures, and test equipment to ensure the unit is fully repaired, tested, and inspected. The project mandates strict adherence to MIL-STD-2073 packaging standards and compliance with Buy American requirements. The final deliverable is one fully restored digital computer. Interested parties should note the response deadline of November 19, 2026, and the classification of the work under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

DEADLINE

Receiver-Transmitter Repair and OverhaulThis subcontract involves the teardown, evaluation, repair, and modification of naval receiver-transmitters for prime contractors supporting U.S. Navy NAVSUP Weapon Systems Support projects. The scope of work includes disassembling, cleaning, and inspecting units, followed by component-level repair and replacement. All work must be tested according to approved manuals and IPC/EIAJ-STD-001C standards, requiring the use of specialized electronic test and measurement equipment and NAVSUP WSS Source Approval. The primary objective of the contract is the delivery of six serviceable, ready-for-issue receiver-transmitters under NSN 5821-01-585-5355 P8. This effort falls under NAICS code 811212 and is managed by the Department of Defense. The response deadline for this opportunity is November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

5-Year Server Parts and Labor Warranty SupportThis subcontract involves providing long-term maintenance and parts replacement for prime contractors supporting the Naval Research Laboratory. The scope of work focuses on the CloudDC SuperServer architecture, requiring the delivery of a functional support mechanism and a comprehensive 60-month warranty that covers all parts and labor, including the management of cross-shipment logistics for replacement components. The project is designated as a total Small Business Set Aside under NAICS code 811212. Performance will take place at the Stennis Space Center in Mississippi. The solicitation was posted on October 20, 2026, with a response deadline of October 30, 2026.

Naval Research Laboratory

POSTED

DEADLINE

Field Service Engineering & Equipment MaintenanceThis subcontract opportunity involves providing field service engineering and equipment maintenance for prime contractors working on Department of Veterans Affairs facility projects within the Seattle Division. The scope of work focuses on executing technical repairs and preventative maintenance strictly adhering to original equipment manufacturer standards to ensure all equipment remains operational. Deliverables include the successful maintenance of equipment and the submission of detailed service reports. Qualified candidates must provide Field Service Engineers who possess a minimum of two years of field experience or hold specific OEM qualifications. The project is located in Seattle, Washington, under NAICS code 811212. Interested parties must submit their responses by October 27, 2026, at 3:00 PM.

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

Power Supply Amplifier Overhaul and RepairThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the overhaul and repair of Power Supply Amplifiers. The scope of work includes the teardown, evaluation, and modification of units to identify failed components and replace internal parts that exceed repair manual limits. All work must be performed in accordance with IPC/EIAJ-STD-001C and MIL-STD-454 standards to ensure the units are returned to a Ready for Issue condition. The project requires the delivery of six Power Supply Amplifier units and necessitates NAVSUP WSS Source Approval for the performing contractor. Interested parties should note the response deadline of November 19, 2026, and the classification of the work under NAICS code 811212.

Navsup Weapon Systems Support

POSTED

DEADLINE

Control-Display Unit Repair and OverhaulThis subcontract involves the technical repair, overhaul, and upgrade of Control-Display Units under NSN 6610-01-670-1033 for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider will be responsible for executing detailed overhaul procedures, inspections, and testing to ensure all units are returned to Ready for Issue condition. Additionally, the scope includes the development of performance specifications and repair procedures to maintain operational standards. To qualify for this effort, the contractor must possess the necessary testing equipment for the specific NSN and hold NAVSUP WSS Source Approval. The primary objective is the delivery of certified RFI units. This opportunity is categorized under NAICS code 811212 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support Mech

Same awarding agency

RECEIVER — 5895016460209 — N0010427QUA17

Solicitation # N0010427QUA17

Solicitation NO0104-27-Q-UA17, issued by NAVSUP Weapon Systems Support Mech, is a firm-fixed price request for quotations for the teardown, evaluation, repair, and modification of a Receiver (NSN 5895-01-646-0209). The contractor is required to ensure the repaired item meets all operational and functional requirements in accordance with original manufacturer specifications, drawings, and Technical Data Package version 002. Key performance requirements include a requested turnaround time of 81 days, Commercial Asset Visibility Repairables Portal reporting, and strict adherence to MIL-STD-130 for physical identification. The government will utilize the Lowest Price Technically Acceptable process for award, evaluating proposals based on technical acceptability and price, while considering item, price, and supplier risk via the Supplier Performance Risk System. Award is restricted to authorized repair sources. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for Depot Level Repairable labels and hazardous material handling per OSHA standards. Inspection and final acceptance will be conducted by the Contract Administration Office at the contractor's location, and all payment requests must be submitted electronically through the Wide Area Workflow system.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

in about 1 month

PRINTED CIRCUIT BOA — 5998011347989 — N0010426QYAJP

Solicitation # N0010426QYAJP

Solicitation N0010426QYAJP is a fixed-price request for quotation issued by NAVSUP Weapon Systems Support Mechanicsburg for the teardown, evaluation, repair, and modification of Printed Circuit Boards (NSN 5998-01-134-7989). The contractor must ensure repaired items meet the operational and functional requirements of CAGE Code 81412 and Reference Number 4965C27G01, utilizing original manufacturer specifications and drawings for all testing and inspection. A critical safety requirement mandates that all materials be mercury-free to prevent corrosion and toxicity on submarines and surface ships, with any necessary exceptions requiring prior written approval from the Procurement Contracting Officer. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price, with supplier risk evaluated via the DoD Supplier Performance Risk System. Deliverables must be completed within 30 days and shipped FOB Destination to DLA Distribution Norfolk, VA, adhering to MIL-STD-2073-1 for packaging and MIL-STD-130 for physical identification. Quality assurance is the contractor's responsibility, requiring the maintenance of inspection records for 365 days post-delivery. Additionally, the contract mandates compliance with various federal regulations, including CMMC cybersecurity requirements, the Buy American program, and the prohibition of covered defense telecommunications equipment.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

PARTS KIT BALL VALV — 4820015292976 — N0010426QNF00

Solicitation # N0010426QNF00

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of three parts kits for 2.5 inch ball valves (NSN 4820-01-529-2976). The material is designated as Special Emphasis Material Level I because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or the loss of the ship. The kits consist of one ball and two mating seats, requiring strict adherence to Naval Sea System Command Drawing 801-6408784 and specific material standards, including SAE-AMS-6931 for the ball and Teflon-filled Acetal for the seats. The contract mandates rigorous quality assurance and certification processes. Requirements include quantitative chemical and mechanical analysis, ultrasonic inspection of starting materials, and strict surface waviness limits. Contractors must maintain a quality system compliant with ISO-9001 and calibration standards such as ISO-10012 or ANSI-Z540.3. All deliverables must be submitted with a Certificate of Compliance and detailed test certifications via the Wide Area Workflow system for review by the Portsmouth Naval Shipyard prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. The delivery timeline is 120 days, with terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129, and the items must be marked according to MIL-STD-130 for unique identification. The procurement is a DO-rated order for national defense, and the contractor is provided a one-year warranty from the date of delivery.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

RUPTURE DISK ASSY — 4820016784766 — N0010426QYAEX

Solicitation # N0010426QYAEX

This contract outlines the requirements for the repair of the Rupture Disk Assembly, specifying that all work must adhere to the contractor's standard practices and approved government technical procedures. Key compliance mandates include physical identification per MIL-STD-130 and strict adherence to a coded system for reporting any changes in design, materials, or part numbers. The contractor is responsible for all inspections and testing based on original manufacturer specifications, with records maintained for 365 days following final delivery. Packaging and preservation must comply with MIL-STD 2073. Special provisions are included for additive manufacturing, which trigger mandatory reporting via the Contract Data Requirements List. If additive methods are used, the contractor must maintain a Master Component Traceability Ledger detailing manufacturing genealogy and material origin. This ledger must be submitted electronically to the NAVSUP HQ AM mailbox and WAWF for DCMA QAR verification prior to the signing of the receiving report. Additionally, award consideration is limited to authorized distributors of the original manufacturer's item.

POSTED

about 16 hours ago

DEADLINE

in about 1 month

PARTS KIT,BALL VALV — 4820015404195 — N0010426QNF02

Solicitation # N0010426QNF02

This solicitation, number N00104-26-Q-NF02, is issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of a Ball Valve Parts Kit (NIIN 015404195). The material is designated as Special Emphasis Level I, meaning it is a Critical Safety Item used in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. The kit consists of a ball and matching seats, requiring strict adherence to Naval Sea Systems Command drawings and specific material standards, including QQ-N-286 and Torlon 4503. Due to the critical nature of the hardware, the contract mandates high-level quality assurance, including ISO-9001 compliance, ultrasonic inspection of starting materials, and specific laboratory testing for slow strain rate tensile tests. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Delivery is required within 120 days on an FOB Destination basis, with all invoicing and certification data processed through Wide Area Workflow. The contract is DO certified for national defense under the Defense Priorities and Allocations System. Strict quality control measures are in place, including mandatory Government Source Inspection, a one-year warranty on supplies, and the requirement for a comprehensive Certificate of Compliance and detailed test certifications prior to shipment to the Portsmouth Naval Shipyard.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

SEAT,VALVE — 4820015404194 — N0010426QNF01

Solicitation # N0010426QNF01

This contract is a solicitation issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of valve seats (NSN 4820-01-540-4194). The material is designated as Special Emphasis Material Level I, meaning it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or the loss of the vessel. Consequently, the contract mandates rigorous quality control, including a requirement for the contractor to maintain a quality system compliant with ISO 9001 and calibration standards such as ISO 10012 or ANSI-Z540.3. The valve seats must be manufactured from Torlon Type 4503 compression molded material in accordance with Naval Sea Systems Command Drawing 801-6408790 and Electric Boat Specification 4147. Strict traceability and certification requirements are in place to ensure the integrity of the components. Each seat must be permanently marked per MIL-STD-792 to provide direct traceability to its chemical and mechanical properties. The contractor is required to submit a Certificate of Compliance and detailed material certification test reports via the Wide Area Workflow system for review and acceptance by the Portsmouth Naval Shipyard prior to shipment. Additionally, the contract prohibits the intentional use of mercury and requires all packaging and marking to adhere to MIL-STD-2073 and MIL-STD-129. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

PARTS KIT,BALL VALV — 4820013382264 — N0010427QFA01

Solicitation # N0010427QFA01

This solicitation is for the procurement of a Ball Valve Parts Kit (NSN 4820-01-338-2264) for use in crucial shipboard systems. Due to the high risk associated with material failure, the items are designated as Special Emphasis Material (Level I Scope of Certification), requiring strict quality control and comprehensive certification. The kit consists of one ball and two mating seats, with specific material requirements including SAE-AMS-6931 or ASTM-B367 Grade C-5 for the ball and MD71-GG Mearthane for the seats. The ball must also receive a specific Chemours Company Teflon coating. The contract mandates rigorous testing and inspection, including hydrostatic tests for each ball, non-destructive testing for welds, and strict spherical surface waviness limits. All material verification, traceability, and NDT certifications must undergo 100 percent inspection, with lot acceptance based on zero defects. The contractor is required to submit detailed certification data and test results via the Wide Area Workflow (WAWF) system to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Administrative requirements include a delivery period of 365 days after the contract effective date and adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking. The award is a DPAS DO-rated order, and the government will evaluate offerors based primarily on past performance and secondarily on price. All welding and brazing must comply with specified Navy standards, and any deviations or engineering change proposals must be approved by the Contracting Officer.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

COMPUTER SUBASSEMBL — 7021015451903 — N0010427QTA16

Solicitation # N0010427QTA16

Solicitation NO0014-27-Q-TA16, issued by NAVSUP Weapon Systems Support Mech, is a request for quotations for the teardown, evaluation, repair, and modification of a computer subassembly, NIIN 015451903. The scope requires all repair work to be performed according to the contractor's standard overhaul practices and original manufacturer specifications. Key deliverables include a quoted Repair Turnaround Time (RTT) and a delivery period of 200 days, with final delivery designated as FOB Destination to the DLA Distribution DDSD New Cumberland Facility in Pennsylvania. Government Source Inspection is required, and the contractor must maintain all inspection records for 365 calendar days following final delivery. The government intends to make a single award based on the most advantageous terms, prioritizing past performance over price. Past performance will be evaluated using the Supplier Performance Risk System to assess item, price, and supplier risk. Technical compliance requires physical identification per MIL-STD-130 and packaging in accordance with MIL-STD-2073 and MIL-STD-129. The contract incorporates critical regulatory clauses, including DFARS 252.204-7012 for safeguarding covered defense information and FAR 52.223-3 for hazardous material identification. Payment and invoicing must be processed electronically through the Wide Area Workflow system.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

NUT,POPPET — 4810011119608 — N0010427QFA02

Solicitation # N0010427QFA02

This solicitation, issued by NAVSUP Weapon Systems Support Mech, is for the procurement of Nut-poppet (NSN 4810-01-111-9608) under TDP Version 004. The material is designated as Special Emphasis Level I, meaning it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. Due to this criticality, the contract mandates strict quality control procedures, including a requirement for the contractor to maintain a quality system in accordance with ISO-9001, ISO-10012, and ISO-17025. All items must be mercury-free and must be marked with a unique traceability number to ensure direct links to chemical and mechanical properties. Technical requirements specify that the Nut-poppet must conform to Marotta Scientific Controls, Inc. drawing 281439-0005 and material specification QQ-N-281. Rigorous inspection standards are enforced, including thread inspection per FED-STD-H28 and non-destructive testing for weld repairs. The contractor must submit a comprehensive Certificate of Compliance and certification data via Wide Area WorkFlow (WAWF) for review and acceptance by Portsmouth Naval Shipyard prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

THRUST SHOE W/INSTR — 3120016233028 — N0010427QTA14

Solicitation # N0010427QTA14

Solicitation N0010427QTA14 is a firm-fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mech for the teardown, evaluation, and repair of the Thrust Shoe w/Instr (NIIN 016233028). The contractor must ensure the repaired items meet all operational and functional requirements associated with CAGE 75333 and Reference No. 482480-008. All work must adhere to approved repair standards, technical orders, and drawings, with physical identification required per MIL-STD-130, Rev N. The government seeks a Repair Turnaround Time of 230 days, measured from the date of asset return to the date of acceptance, and encourages accelerated or incremental delivery. Award will be made to a single, technically acceptable offeror determined to be most advantageous, with past performance weighted as more important than price. Evaluation of past performance utilizes the Supplier Performance Risk System to assess item, price, and supplier risk. The contract mandates strict quality assurance, requiring the contractor to integrate inspections into their quality program and maintain records for 365 days post-delivery. Packaging must comply with MIL-STD-2073-1 for military distribution and OCONUS shipments, while CONUS shipments may use ASTM D3951-18. Invoicing is processed electronically via the Wide Area Workflow system.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

LIGHT SIGNAL RECEIV — 6030017138790 — N0010427QUA18

Solicitation # N0010427QUA18

Solicitation N0010427QUA18, issued by the Department of the Navy's NAVSUP Weapon Systems Support, is a fixed-price request for quotations for the manufacture and delivery of 112 Light Signal Receivers (NSN 6030-01-713-8790). The contract includes an option for an additional 100 percent quantity within 365 days of the award. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluation based on the lowest aggregate total price for both the base quantity and option provisions. The government will utilize the Supplier Performance Risk System to assess item, price, and supplier risks. The contractor is responsible for all inspection requirements, though Government Source Inspection is required, and inspection records must be maintained for 365 days following final delivery. Deliverables must adhere to strict physical identification and marking standards, including MIL-STD-130, MIL-STD-129, and MIL-STD-2073 for packaging. Specific requirements include the use of DLR labels and SMIC markings where applicable. All shipments are FOB Origin, and payment will be processed electronically through the Wide Area Workflow system. Offerors must be authorized distributors of the original manufacturer and submit their quotes, including completed Standard Form 33 and required representations, electronically to the designated contracting official.

Other Communications Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

PARTS KIT,BALL VALV — 4820014254163 — N0010426QNE98

Solicitation # N0010426QNE98

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of 175 ball valve parts kits (NSN 4820-01-425-4163). The material is designated as Special Emphasis Level I, as it is intended for use in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. The kits consist of a ball made from SAE-AMS-6931 and seats made from MD71-GG Mearthane graphite-filled urethane. Due to the critical nature of these components, the contract mandates strict adherence to technical drawings, quantitative chemical and mechanical analysis, and specific testing, including hydrostatic or dye penetrant inspections for each ball. The government will make a single fixed-price award based on a determination of the most advantageous offer, prioritizing past performance over price. Contractors must maintain a quality system compliant with ISO-9001 or MIL-I-45208 and provide a Quality Assurance Manual to be eligible for award. All deliverables require a Certificate of Compliance and objective quality evidence submitted via Wide Area Workflow to Portsmouth Naval Shipyard for review and acceptance prior to shipment. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with a zero-defect acceptance policy for final inspection.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS