Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Asbestos Material Testing and Analysis

Active

State & Local

Response Deadline03/31/2029, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Asbestos Material Testing and Analysis supports prime contractors on City of Pittsburgh projects managed by Pittsburgh Licenses and Inspections Permits. The selected provider will perform chemical and microscopic analysis using Polarized Light Microscopy to identify the presence and concentration of asbestos in samples collected during pre-demolition surveys. To qualify, the provider must maintain an approved laboratory facility accreditation through NVLAP or a state-equivalent body and deliver certified analysis reports for every sample processed. The contract is categorized under NAICS code 541380 and remains open for responses until March 31, 2029.

General Info

Accredited lab provides asbestos testing and analysis for City of Pittsburgh demolition projects.

Agency

Pennsylvania → Pittsburgh Licenses & Inspections Permits

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA, USA

Set-Aside

NONE

Documents

This scope was carved out of 2025-PQMA-187.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PQ List for Pre-Demolition Asbestos Surveys (CD)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 18

subcontract

Response DeadlineMar 31

Submission deadline

Response Deadline

03/31/2029, 09:00:00 PM UTCin over 2 years

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyPennsylvania → Pittsburgh Licenses & Inspections Permits

ContactsNo contacts available

OfficeN/A

Organization / AgencyPennsylvania → Pittsburgh Licenses & Inspections Permits

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies laboratory testing services for prime contractors on City of Pittsburgh projects to analyze samples collected during pre-demolition surveys. Performs chemical and microscopic analysis using Polarized Light Microscopy (PLM) to determine asbestos presence and concentration. Requires an approved laboratory facility accreditation (NVLAP or state-equivalent). Delivers certified laboratory analysis reports for each sample.

Similar Contracts

Same NAICS industry code

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 1 hour ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) and Thread Gaging Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

Specialized Testing and Certification ServicesThis subcontract for Specialized Testing and Certification Services involves performing First Article Testing for prime contractors on DLA Troop Support projects. The primary objective is to validate hoisting beam specifications by executing tests under CLIN 0002, utilizing calibrated measurement equipment and load testing rigs to ensure dimensional accuracy, load capacity, and overall structural integrity. The selected provider is responsible for delivering an approved First Article along with a comprehensive FAT Certification Report and certification of compliance. This project is managed under the Department of Defense for Construction and Equipment Manufacturing and is to be performed in Tracy, California.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) ServicesThis Service-Disabled Veteran-Owned Small Business set-aside subcontract involves providing First Article Testing services for the Department of Defense at the DDSP New Cumberland Facility. The contractor is responsible for performing specialized testing on 14 initial units for prime contractors associated with DLA Troop Support Construction and Equipment projects. All work must be executed according to Reference QAP 14153 SQAP-FAT3 to validate manufacturing processes, and the contractor must be capable of handling export-controlled technical data. The primary deliverables for this engagement include 14 validated test units and a certified First Article Test Report. Interested parties must respond by November 9, 2026, for this project categorized under NAICS code 541380.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract involves performing First Article Testing and Quality Validation for the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The primary objective is to conduct validation on a single prototype unit to certify that manufacturing processes align with MIL-DTL specifications. The selected contractor will be responsible for coordinating with Quality Assurance Representatives and delivering both a validated test unit and a formal FAT Certification Report. The project is categorized under NAICS code 541380 and will be performed in Bremerton, Washington. Interested parties must respond by November 9, 2026, regarding the solicitation posted on October 28, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) Services for Electrical WireThis subcontract involves providing First Article Testing services for electrical wire to support the DLA Weapons Support Maritime Supply Chain. The selected provider will be responsible for verifying that first production units meet MIL-DTL-16878/3C(1) standards using military-grade electrical testing laboratory equipment. Key deliverables include the submission of FAT certifications, detailed test reports, and verified first article samples, all while coordinating closely with Quality Assurance Representatives for final inspection. The project is managed under NAICS code 541380 and will be performed at Fort Stewart, Georgia. Interested parties must note the response deadline of November 9, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

More opportunities from Pennsylvania → Pittsburgh Licenses & Inspections Permits

Same awarding agency

Pre-Demolition Asbestos SurveyingThis subcontract for Pre-Demolition Asbestos Surveying involves performing comprehensive structural inspections for prime contractors working on City of Pittsburgh projects. The primary objective is to identify asbestos-containing materials through physical inspections and the collection of material samples. The selected provider is responsible for delivering digital Asbestos Survey Reports and completed PA DEP Notification Forms. To qualify for this engagement, inspectors must be licensed by the Commonwealth of Pennsylvania Department of Labor and Industry. The contract falls under NAICS code 541620 and is managed through Pittsburgh Licenses and Inspections Permits. The response deadline for this opportunity is March 31, 2029.

Environmental Consulting Services

POSTED

about 1 month ago

DEADLINE

in over 2 years

PQ List for Pre-Demolition Asbestos Surveys (CD)

Solicitation # 2025-PQMA-187

The City of Pittsburgh Office of Management and Budget, acting for the Department of Permits, Licenses, and Inspections, is establishing a Pre-Qualified Master Agreement (solicitation 2025-PQMA-187) for contractors to perform pre-demolition asbestos surveys. This agreement creates a pre-qualified list of vendors eligible to bid on individual scopes of work. The initial contract period begins upon execution and terminates at midnight on June 30, 2029. To be eligible, contractors must provide certifications from the Pennsylvania Department of Labor and Industry under the Asbestos Occupations Accreditation and Certification Act (Act 194 of 1990) and submit completed CDBG Section 3 and MWDBE/LGBTQIA+ participation documentation. Awards are made to the lowest responsive and responsible bidder. Responsiveness requires meeting all formal submission criteria, including the provision of required licensing and bid security, while responsibility is based on the contractor's qualifications, integrity, and ability to perform work according to industry standards. The contract mandates compliance with the Davis-Bacon Act, the Copeland Anti-Kickback Act, and the City Service Worker Prevailing Wage Ordinance. Additionally, the City has set participation goals of 18% for MBEs, 7% for WBEs, 5% for veteran-owned small businesses, and 3% for LGBTQIA+ businesses. Applications must be submitted electronically to [email hidden], as responses via OpenGov Procurement are not accepted. Standard payment terms are Net 45, with options for ePayables and Visa Purchasing cards. Vendors on federally funded projects must provide a SAM.gov Unique Entity ID. All work must be performed in a timely and workmanlike manner, adhering to the Build America, Buy America Act and the Americans with Disabilities Act.

Environmental Consulting Services

POSTED

about 1 month ago

DEADLINE

in over 2 years

Earlier notices in this NAICS code

Posted before this notice, open and closed

Quality Assurance & Material Testing

Public Works - Capital Development

POSTED

about 1 month ago

CLOSED

Geologic Laboratory Testing and Analysis

Department Of Environmental Services

POSTED

about 1 month ago

CLOSED

Specialized Termite Treatment & Control

POSTED

about 1 month ago

CLOSED

about 1 month ago

General Pest Control Services

POSTED

about 1 month ago

CLOSED

about 1 month ago

Structural Steel and Welding Inspection Services

POSTED

about 1 month ago

CLOSED

Portland Cement Concrete and Aggregate Testing

POSTED

about 1 month ago

CLOSED

Asphalt and Bituminous Materials Testing

POSTED

about 1 month ago

CLOSED

Soil and Aggregate Materials Testing

POSTED

about 1 month ago

CLOSED

Construction Materials Testing & Geotechnical Investigation

Solicitation # 9155

POSTED

about 1 month ago

CLOSED

Process Quality Control and Lab Testing

New Mexico Department of Transportation

POSTED

about 1 month ago

CLOSED

about 1 month ago

NETA Certified Electrical Testing and Commissioning

County of Orange, OC Public Works

POSTED

about 1 month ago

CLOSED

Soil Testing and Mapping Services

REALTYCAPPLAN422 - Office of Realty and Capital Planning

POSTED

about 1 month ago

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS