This Solicitation opportunity from Government of Canada was posted on May 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Autonomous Mower for Solar Garden

Closed

TOA05272026AutonomousMowerforSolarGardenInternational

Submission Closed06/10/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333112

New

Federal

2420--265 Compact Track LoaderThe solicitation is for a 265 Compact Track Loader under contract number 36C24626Q0707, issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6 located in Hampton, Virginia. This is a total small business set-aside as defined by FAR 19.5, meaning only small business concerns are eligible to bid, and the NAICS code 333112 applies to the manufacturing of construction and mining machinery. The opportunity was posted on July 24, 2026, with a response deadline of July 30, 2026, at 2:00 PM Eastern Time. The equipment is required for performance in Asheville, North Carolina, with a ZIP code of 28805. Kristine E. Woodbury, Contract Specialist, is the primary point of contact and can be reached at Kristine.Woodbury@va.gov for questions or clarification regarding the solicitation. The full solicitation details and submission portal are available through the provided SAM.gov link.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

2420--Supply/Equipment - Zero Turn Mowers - Chillicothe VA Medical CenterThe Department of Veterans Affairs, Network Contracting Office 10, is seeking information from potential suppliers for the procurement of four zero-turn ride-on mowers for the Chillicothe VA Medical Center in Ohio. This notice is a sources sought request intended solely for market research and does not constitute a solicitation or binding obligation. The agency is evaluating the availability of new, factory-fresh mowers meeting specific technical specifications including a 61-inch deck, a 37-40 HP gasoline engine, dual pump and motor drive system, cutting height adjustment in 0.25-inch increments from 1.5 to 6 inches, and a 12-gallon fuel tank. Minimum factory options required include suspension, a digital speedometer, a digital hour meter, and all-day run time capability. Respondents must demonstrate capability to provide mowers that meet these standards, either as the named Toro brand or an equal product, with detailed documentation proving equivalence. The NAICS code for this effort is 333112, and the government is particularly interested in identifying small businesses, including service-disabled veteran-owned and veteran-owned small businesses. All interested parties must be registered in SAM and, if claiming small business preferences, must also be certified through the SBA’s VetCert program. The response deadline is July 31, 2026, at noon, and submissions must be emailed to the designated contracting specialist; phone inquiries are not accepted.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

2420--VENTRAC 4520N COMPACT TRACTORThe U.S. Department of Veterans Affairs, through the 246-NETWORK Contracting Office 6 located in Hampton, Virginia, is seeking to procure a VENTRAC 4520N Compact Tractor under solicitation number 36C24626Q0831. This procurement is a Total Small Business Set-Aside, meaning only small businesses certified under the Small Business Administration’s guidelines are eligible to respond, as defined by FAR 19.5. The North American Industry Classification System code for this requirement is 333112, indicating it falls under the manufacturing of agricultural machinery. The solicitation was posted on July 24, 2026, with responses due by August 7, 2026, at 4:00 p.m. Eastern Time. The equipment is intended for performance at a location in Asheville, North Carolina, with a zip code of 28805. Harold McQuillia, Contracting Officer, is the primary point of contact for this opportunity and can be reached via email at harold.mcquillia@va.gov. The procurement is managed under the Office of the Department of Veterans Affairs and is accessible via the SAM.gov platform. The VENTRAC 4520N Compact Tractor is a specialized piece of equipment likely needed for landscaping, groundskeeping, or maintenance tasks on VA facilities. Interested parties must ensure full compliance with small business eligibility requirements and submit proposals prior to the deadline to be considered.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

3740--Steel Green Sprayer for Asheville VAMCThe contract titled 3740--Steel Green Sprayer for Asheville VAMC is a small business set-aside solicitation issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6 located in Hampton, Virginia. It is classified under NAICS code 333112, indicating it relates to the manufacturing of agricultural and forestry machinery, and is exclusively reserved for small businesses as defined by the SBA. The solicitation was posted on July 24, 2026, with a response deadline of July 30, 2026, at 2:00 PM Eastern Time. The primary point of contact for inquiries is Kristine E Woodbury, Contract Specialist, reachable via email at Kristine.Woodbury@va.gov. The procurement aims to acquire a steel green sprayer for use at the Asheville VA Medical Center, though the specific delivery location is not detailed in the provided information. All responses must be submitted through the SAM.gov portal prior to the deadline to be considered.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Abatement Equipment (mowers, trimmer, etc.) - Kohler EquipmentThe Department of Buildings in the District of Columbia has issued a forecast for the procurement of abatement equipment including mowers, trimmers, and related machinery under the contract titled Abatement Equipment (mowers, trimmer, etc.) - Kohler Equipment. This forecast indicates a future procurement opportunity with no current solicitation number or set aside classification, suggesting the agency is planning ahead for acquisition needs without immediate competitive bidding. The equipment is intended for use in municipal operations under the agency’s jurisdiction, though specific delivery locations and performance addresses are not yet defined within the posting. While details such as NAICS code, organizational type, point of contact, and physical address information are missing, the forecast provides a public notice of the department’s intent to acquire maintenance and abatement tools, likely to support environmental, safety, or infrastructure upkeep activities. The posted date of July 23, 2026 implies this forecast is for a future fiscal cycle, giving vendors time to prepare for potential bids. Interested parties can access additional information through the provided public portal link, though no formal solicitation has been issued at this time.

Department Of Buildings (DOB)

POSTED

DEADLINE

Self-Propelled Dual-Purpose Lawn and Road Sweeper SupplyThe contract seeks the procurement and delivery of a self-propelled dual-purpose sweeper designed to efficiently clean both turf and paved surfaces across a range of 250 acres of landscape and six miles of paved areas. The equipment must be capable of handling diverse terrain and surface conditions with consistent performance, ensuring high-quality cleaning results in both open green spaces and roadway environments. The solution must meet operational demands for durability, ease of use, and maintenance in real-world field applications, with technical specifications aligned to support sustained use over extended periods. This is a total small business set-aside contract under the SBA program, classified under NAICS code 333112 for lawn and garden equipment manufacturing, and is being managed by the Department of Veterans Affairs through the Network Contract Office 23. The solicitation was posted on July 23, 2026, with proposals due by August 6, 2026, and is structured as a subcontract opportunity. The place of performance and point of contact details are not specified in the provided data, however, interested parties must respond through the official SAM.gov portal linked in the solicitation before the deadline to be considered.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

3825--Lawn Sweeper ReplacementThe Department of Veterans Affairs, through Network Contracting Office 23, is seeking a Brand Name or Equal Smithco Sweep Star 60 Quad Lawn Sweeper under a Total Small Business Set-Aside for the VA Black Hills Health Care System, with the solicitation number 36C26326Q0947. The requirement is for a self-propelled, dual-purpose sweeper capable of handling 250 acres of turf and six miles of paved surfaces, featuring a 60-inch sweeping width, a 35+ HP engine, hydrostatic drive with speeds up to 12 mph, a 3-cubic-yard hydraulic hopper, turf-safe tires, and a digital operator interface. The contract will be awarded using a Lowest Priced Technically Acceptable (LPTA) evaluation method, where the lowest-priced offer that meets all technical requirements will be selected without trade-offs between cost and performance. Offers must be submitted electronically via email to Justin.Erdley@va.gov by August 6, 2026, at 12:00 PM Mountain Time, using the Standard Form 1449, and all questions must be received 72 hours prior to the deadline. The equipment is to be delivered FOB destination to 113 Comanche Rd, Building T171, Fort Meade, SD 57741, within 60 to 90 days after receipt of order, and acceptance will occur upon delivery at that location. The contract is a firm-fixed-price arrangement governed by multiple FAR and VAAR clauses, including 52.212-4 for commercial item terms, 52.219-6 for the Total Small Business Set-Aside, and 52.222-36 and 52.222-90 addressing equal opportunity and DEI compliance. Additional requirements include compliance with sustainable products standards, prohibitions on covered telecommunications equipment and inverted domestic corporations, whistleblower rights protections, and restrictions on confidentiality agreements that inhibit employee reporting. Offerors must provide a Unique Entity Identifier (UEI) and CAGE code, and must certify compliance with national security restrictions, sanctions prohibitions, and fair labor standards. Invoicing is due upon delivery and acceptance, with payment processed through the Department of Veterans Affairs Financial Services Center in Austin, TX via Electronic Funds Transfer. Packaging, preservation, and marking guidelines are not explicitly defined beyond requiring traceability via C

Network Contract Office 23 (36C263)

POSTED

DEADLINE

FPC ALD - Commercial Zero-Turn Mowers

POSTED

DEADLINE

POSTED

DEADLINE

POSTED

DEADLINE

NEW CURRENT PRODUCTION MODEL: ONE (1) STIHL RZ 560 K SERIES GASOLINE ZERO-TURN MOWER OR EQUALThe County of Riverside, through its Transportation Land Management Agency Department – Aviation Department, is seeking bids for one new, unused STIHL RZ 560 K SERIES gasoline zero-turn mower or an equivalent model, with delivery required to Murrieta, California. The mower must be delivered with a full fuel tank and all necessary documentation including the user’s manual and warranty information. Any bid proposing a substitute product must come from a well-established, reputable manufacturer with a demonstrated history of product reliability and long-term parts availability. The substitute equipment must also be supported by a local authorized dealer or service provider capable of performing routine maintenance, warranty repairs, and ensuring prompt access to replacement parts. The County reserves the right to require a live demonstration and evaluation of any substitute model to confirm it meets the required fit, form, and function specifications. The solicitation number is AVARC-26-018, with bids due by August 6, 2026, and all inquiries should be directed to Angela Sarmiento at the County of Riverside.

POSTED

DEADLINE

Finish Mower Attachment Supply

Gordon County Board of Commissioners

POSTED

3 days ago

DEADLINE

in 25 days

AI Contract Overview

The Town of Antigonish is seeking qualified suppliers to provide a complete autonomous mowing system for use in a solar garden, including all necessary equipment, accessories, installation, configuration, training, documentation, and ongoing support. Quotes must be submitted by 2 p.m. Atlantic Time on June 10, 2026, either in hard copy to the Town’s office at 274 Main Street, Antigonish, NS, or electronically as a PDF with the submission line clearly marked as RFQ No. TOA05272026-Autonomous Mower for Solar Garden. There is no cost to obtain the tender documents, and while notices on CanadaBuys may be available, bidders are directed to the Nova Scotia Procurement Portal for the most current and detailed information, including any amendments or additional requirements. Third-party platforms may be used to access documents or submit responses, and users should be prepared for potential registration or fees associated with those systems. The contract does not specify duration in the public posting and should be confirmed through the official tender documents. Primary point of contact for inquiries is Nafis Rahman, Contracting Authority, reachable via email at estudent@townofantigonish.ca.

General Info

Antigonish seeks autonomous mower system for solar garden with installation, training, and support; quotes due June 10, 2026.

Agency

Government of Canada → Town of Antigonish

NAICS

333112 - Lawn and Garden Tractor and Home Lawn and Garden Equipment ManufacturingView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 27

Solicitation

Response DeadlineJun 10

Deadline has passed

Submission Closed

06/10/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Town of Antigonish

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Town of Antigonish

Office AddressN/A

Contacts

Nafis RahmanContracting Authority

contact@example.gov

Full Description

The Town of Antigonish is requesting quotes from qualified suppliers for all equipment, accessories, set up, configuration, training, documentation and support required to place an autonomous mowing system into service. Sealed quotes will be received up until 2 p.m. (Atlantic Time) on June 10, 2026. Submissions will be received Attn. Nafis Rahman- Town of Antigonish, 274 Main Street, Antigonish, NS B2G 2C4 or electronically in a pdf format, the submission line must read RFQ No. TOA05272026-Autonomus Mower for Solar Garden Cost of acquiring documents: Not Applicable Terms of payment for acquiring documents: Not Applicable Tender notices on CanadaBuys published for Nova Scotia Public Sector Entities may not reflect amendments. For tender documents and up-to-date addenda, refer to the Nova Scotia Procurement Portal: https://procurement-portal.novascotia.ca/tenders/TOA05272026AutonomousMowerforSolarGarden For additional detail on contract duration, refer to the tender documents. Note that in some cases, third-party hosting platform registration and/or fees may be required to review related documents, or to submit tender responses.