Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Award Notice for Shimadzu Maintenance

Awarded
N0017426D1001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Surface Warfare Center, Indian Head Division has awarded a contract for maintenance support of Shimadzu gas chromatography-mass spectrometry instruments under the authority of 10 U.S.C. 3204(a)(1), which permits sole-source procurement due to the unique specifications of the equipment and the absence of alternative suppliers capable of meeting the agency's requirements. This acquisition is not subject to competitive bidding and is limited exclusively to the identified provider qualified to service these specialized instruments. The contract was issued under solicitation number N0017426D1001, posted on April 30, 2026, with NAICS code 811310 indicating it falls under medical and diagnostic laboratory services. Primary performance of the work will occur in Arlington, Virginia, while the contracting office is located at Indian Head, Maryland. Lisa Ludwick serves as the primary point of contact and can be reached via email at [email hidden]. The contract is directly managed by the Department of Defense through NSWC IHD, with no set-aside provisions applicable to this award.

General Info

NSWC IHD awarded sole-source contract for Shimadzu GCMS maintenance in Arlington, Virginia.

Contract Value

$0

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Arlington, VA, USA

Set-Aside

NONE

Award Issued Date

Documents

1

FY25-JUN30-37 - Justification and Approval for Shimadzu GCMS Support

PDF, Low priorityjustification-and-authorization
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Justification (J&A)

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Indian Head Division
Contacts1 person available
OfficeINDIAN HEAD, MD, 20640-1533, USA
Office AddressINDIAN HEAD, MD, 20640-1533, USA
Contacts

Full Description

Show more

The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) has requires Maintenance Support for Shimadzu GCMS Instruments. This acquisition was conducted under the authority of 10 U.S.C 3204(a)(1), Only One Responsible Source and No Other Supplies or Services will Satisfy Agency Requirements.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation is soliciting lump sum bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist and no cab or loader at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all transportation, labor, supervision, tools, and materials to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. All work must adhere to manufacturer specifications, and the final project is subject to inspection and testing by the Facility Maintenance Department to verify proper engagement and disengagement under load. This solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone concerns, and requires a Unique Entity Identification number for subcontractors. Bidders must submit a bid sheet, a completed supplier packet including a W-9 and self-certification form, and proof of insurance by November 3, 2026. The contract is subject to several federal regulations, including the Service Contract Act for wage determinations in Kentucky, Buy American requirements, and various FAR clauses regarding small business utilization and combating trafficking in persons. Award selection will be based on best value as determined by the procuring agency.
Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 811310
New
Federal
US Army Hawaii Dining Facilities’ Large Equipment Preventative Maintenance & Repair Services
Solicitation # W912CN-27-Q-A009
The Regional Contracting Office Hawaii is soliciting a firm-fixed-price requirements contract for preventive maintenance, routine and emergency repairs, and general maintenance of large kitchen equipment at US Army Hawaii Dining Facilities. The scope of work covers installations on the islands of Oahu and the Big Island, specifically including the Pohakuloa Training Area. The contract is structured with one base year and four option years, with a total period of performance extending from December 15, 2026, through December 14, 2031. This acquisition is a 100% set-aside for small businesses, specifically targeting Women-Owned Small Businesses. Award will be based on the best value using a comparative evaluation method. The government will assess technical capability, the qualifications of key personnel—requiring a Project Manager and Alternate Project Manager with five years of relevant experience—and total evaluated price. To be considered acceptable, quoters must provide a technical capability narrative, required resumes, and a fixed hourly repair labor rate compliant with Service Contract Labor Standards. All quotes, including signed SF 1449 and SF 30 forms and required technical documentation, must be submitted electronically to the contract specialist by November 30, 2026, at 10:00 AM HST.
0413 Aq Hq Rco-Hi

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
SLED
Elevators and Chairs Lifts Inspection Maintenance & Repair
Solicitation # 2027-IFB-059
The Charleston County School District is soliciting bids under solicitation number 2027-IFB-059 for the inspection, maintenance, and repair of 78 elevators and chair lifts. The contract is structured for a one-year base period with four optional one-year renewal periods. The scope of work requires a comprehensive preventative maintenance program consisting of quarterly service, including lubrication, testing, and cleaning, as well as emergency repair capabilities to ensure a safe operational environment. All work must adhere to American National Standards Institute (ANSI) codes and best modern practices, with all replacement parts being new. For repairs exceeding 2,500 dollars, the contractor must provide a specific scope of work and quote for authorization. Award will be determined based on a Best Value approach, with price accounting for 60 points of the evaluation. Bidders must provide unit pricing for quarterly inspections, normal and non-normal business hour labor rates, and specific Category 1 and Category 5 test charges. The solicitation requires bidders to disclose any OSHA fines from the last three years and jobsite fatalities from the last five years. Submissions must be made through the designated procurement portal, and the district reserves the right to employ an elevator consultant to evaluate the contractor's performance. All contracts are governed by South Carolina law and require compliance with the Davis-Bacon Act and Equal Employment Opportunity regulations.
Facilities Management

POSTED

about 20 hours ago

DEADLINE

in about 2 hours
View Details
NAICS: 811310
New
SLED
WIOHDR30R - Overhead Door Repair and Maintenance- MDOT/SHA Wicomico county
Solicitation # WIOHDR30R
Solicitation WIOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for overhead door repair and maintenance services at the Salisbury Shop in Wicomico County. The scope of work includes semi-annual preventative maintenance for 23 doors, totaling six service visits over a three-year period, as well as on-call repair services. The contractor must provide all necessary tools, lubricants, and a 25-foot electric scissor lift, ensuring that all replacement parts are new and of first quality. All work must adhere to manufacturer specifications, building codes, and industry best practices, with the vendor required to rework any faulty workmanship at no cost to the state. This is a single-award contract that will be granted to the responsive and responsible Certified Small Business with the lowest total bid price. To qualify, bidders must be registered with the State Department of Assessments and Taxation and eMaryland Marketplace Advantage, possess at least two years of continuous experience in professional overhead door services, and utilize their own employees rather than subcontractors. Bids must be submitted as a single package via eMMA by November 18, 2026, and must include a signed price form, a bid affidavit, reference checks from the last five years, and documentation of minimum qualifications. Invoicing is permitted up to twice monthly following the acceptance of work.
State Highway Administration

POSTED

about 20 hours ago

DEADLINE

in 21 days
View Details

More opportunities from Department Of Defense → Nswc Indian Head Division

Same awarding agency

NAICS: 321920
New
Federal
MIL-Spec Wood Crates IAW ASTM D6880/PPP-B-621
Solicitation # N0017427Q0001
The Naval Surface Warfare Center Indian Head Division is soliciting quotes for a firm-fixed-price purchase order for 1,200 Container Assemblies under solicitation N0017427Q0001. This effort is a total small business set-aside under NAICS code 332439, with a size standard of 600 employees. The government intends to award the contract to the responsible vendor based on a Lowest Price Technically Acceptable (LPTA) basis, evaluating quotes on technical specifications, brand adherence, and total price including shipping. All deliverables must be shipped to Indian Head, Maryland, by November 27, 2026. Interested offerors must request technical drawings by October 13, 2026, and provide ITAR certification prior to release. A critical requirement for technical acceptability is the submission of documentation verifying an active CMMC Level 1 Self-Assessment recorded in the Supplier Performance Risk System (SPRS), while the final contract requires CMMC Level 2 compliance and a System Security Plan available for review within 30 days of award. Quote packages, including the company name, point of contact, UEI, and CAGE code, are due by October 22, 2026. The contractor is responsible for strict quality control, maintaining a quality system adhering to ISO 9001:2015 and using equipment compliant with ISO/IEC 17025:2017. Deliverables are subject to a zero-defect acceptance threshold and require a Final Dimensional Inspection Report, a Certificate of Completion, and a Certificate of Analysis. Packaging must comply with MIL-STD-130 and MIL-STD-129 for unique item identification and marking. Invoicing and payment will be processed electronically through the Wide Area Workflow (WAWF) system.
Wood Container and Pallet Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332710
Federal
Body, Retainer, and Gasket
Solicitation # N0017426Q1120
The Naval Surface Warfare Center Indian Head Division (NSWC IHD) is soliciting quotes under RFQ N0017426Q1120 for the fabrication, inspection, and delivery of Aviation Critical Safety Items (ACSIs), specifically Delay Bodies, Ignition Device Retainers, and Aluminum Gaskets. This is a total small business set-aside under NAICS code 332710, intended to be awarded as a firm-fixed-price purchase order. The government will utilize a Lowest Price Technically Acceptable (LPTA) basis for award, evaluating quotes based on technical adherence to specifications and total price, including shipping and handling. All deliverables must be delivered FOB Destination to Indian Head, Maryland, with an overall delivery deadline of April 30, 2027. Prospective contractors must meet stringent technical and security requirements. ITAR certification is required to receive technical drawings, which must be requested by October 23, 2026. A critical requirement for technical acceptability is the verification of a current CMMC Level 2 status (Conditional or Final) recorded in the Supplier Performance Risk System (SPRS). Additionally, the contractor must maintain a quality management system adhering to ASQ/ANSI/ISO 9001:2015 and submit an Inspection Test Plan and First Article Testing (FAT) samples where applicable. Quote packages, including the company name, point of contact, UEI, and CAGE code, must be submitted via email by November 6, 2026, at 10:00 AM EST.
Machine Shops

POSTED

20 days ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS