Top

B550 INSTALL CLEAN ROOM HVAC

Forecast

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

This project involves the engineering design and installation of a new HVAC system for the NDSTC Critical Clean Room located in Building 550. The initiative is necessary because existing units are unable to maintain required environmental standards despite numerous repair attempts. The scope of work includes providing a new design if needed and installing a system with humidity controls to ensure mission critical requirements are met. The system must strictly adhere to MIL-STD 1330E and local governing procedure NDSTC-PD-31-001, maintaining an average air temperature of 72 plus or minus 5 degrees Fahrenheit and an average relative humidity between 30 percent and 50 percent. This effort is being managed by Navfac Southeast for the Department of the Navy and is designated as an 8(a) set-aside under NAICS code 238220.

General Info

Design and install HVAC system for NDSTC Clean Room meeting MIL-STD 1330E standards.

Agency

Department Of The Navy → Navfac Southeast

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

USA

Set-Aside

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseForecast

PostedJul 2

forecast

Prepare for this forecast

Research the agency, track this forecast, and prepare your capture plan before the solicitation opens.

Organization & Contact Information

AgencyDepartment Of The Navy → Navfac Southeast

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navfac Southeast

Office AddressN/A

ContactsNo contact information available

Full Description

27JUNE2023 PER WIB - MASTER, REQ, SA, ENGINEERING DESIGN, CUSTOMER NDSTC FUNDED B550 DESIGN HVAC SYSTEM TO MAINTAIN ENVIRONMENTAL REQUIREMENTS FOR NDSTC CLEAN ROOM WITH COST ESTIMATE, NDSTC FUNDED FY24 Q2 NDSTC CLEAN ROOM BLDG 550 CANNOT MEET STANDARD IAW ATTACHED REQUIREMENTS. NUMEROUS TROUBLE CALLS HAVE BEEN PLACED IN ORDER TO TRY TO REPAIR AND THE BOSC ARE UNABLE TO REPAIR. NEW UNIT INSTALLED WITH A HUMIDITY CONTROL SYSTEM TO MEED STANDARDS LISTED IN THE ATTACHED IN THE ADDITIONAL INFORMATION BLOCK TO INCLUDE A NEW DESIGN IF NEEDED IS REQUIRED IN ORDER TO CONTINUE MISSION CRITICAL REQUIREMENTS. ENVIRONMENTAL REQUIREMENTS FOR NDSTC CRITICAL CLEAN ROOM SINCE WE ARE CONSIDERED A "CRITICAL CLEAN ROOM" OUR TEMPERATURE REQUIREMENT IS 72_+5 F AND OUR AVERAGE RELATIVE HUMIDITY REQUIREMENT IS 30% TO 50% RELATIVE HUMIDITY. I.A.W. MIL-STD 1330E TABLE II AND REFERENCED AGAIN IN MIL-STD 1330E CHAPTER 5.1.3 AND THE SAME PARAMETERS IN OUR LOCAL GOVERNING PROCEDURE INSTRUCTION NDSTC-PD-31-001 CHAPTER 5.1.3. THE FOLLOWING IS CRITICAL CLEAN ROOM TEMPERATURE AND HUMIDITY REQUIREMENTS REFERENCE EXTRACTION FROM MIL-STD 1330E: TABLE II. CLEANROOM AND CONTROLLED AREA REQUIREMENTS. ATTRIBUTE REQUIREMENT CRITICAL CLEANROOM GENERAL CLEANROOM CONTROLLED AREA STRUCTURE 5.1.1 CLASS A CLASS B CLASS C MAINTENANCE 5.1.2 CLASS A CLASS B CLASS C AVERAGE AIR TEMPERATURE 5.1.3 72±F 72±10F AVERAGE RELATIVE HUMIDITY 5.1.3 30 TO 50% 70% MAXIMUM UNCONTROLLED AIR FILTRATION 5.1.4 TYPE A TYPE B TYPE B VENTILATION AND AIR PRESSURE 5.1.5 CLASS A CLASS B CLASS C PERSONAL CLOTHING 5.1.6 CLASS A CLASS B CLASS C TOOLS AND EQUIPMENT 5.1.7 As a "Critical Clean Room" ... NOTE: description has been truncated, please see Project Note for full description.