Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on June 16, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Bahrain FFG Modernization

Closed
RFI-KYPT-23-0001-RBNFFG7Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611
New
Federal
NAVY NP FENDER RENEWAL
Solicitation # 70Z04027Q60514Y00
The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotes for a Firm Fixed Price Purchase Order to perform a rubber fender system renewal on a 108-foot Yard Patrol Craft. The scope of work includes the removal of existing upper and lower fendering, securing bars, and hardware from the exterior hull and transom, followed by the installation of new rubber fenders and associated hardware. Specific requirements include replacing up to 60 linear feet of CRES securing flat bars and 75 linear feet of mounting plates and oak shims, as well as installing new studs, nuts, and washers. The government will provide 24 Type-D black EPDM fenders as government furnished material located at the Coast Guard Yard in Curtis Bay, Maryland, which also serves as the place of performance. This is a total small business set-aside conducted under FAR Part 13 Simplified Acquisition Procedures, with awards based on best value considering technical requirements, deadlines, and price. All work must be completed by December 11, 2026. Quotes must be submitted via email to Erica Gibbs by November 16, 2026, at 9:00 am Eastern. Payment will be processed via Net 30 terms through the IPP system, and no down or advanced payments will be provided. Vendors must be able to secure funding until delivery and may need to be registered in the Joint Certification Program to access export-controlled drawings.
CG-SEA-C23

POSTED

about 8 hours ago

DEADLINE

in 17 days
NAICS: 336611
New
Federal
Voyage Repair (VR)
Solicitation # N6817127QN006
Solicitation N6817127QN006 is a Request for Quote issued by NAVSUP FLC Sigonella Naples Office for firm fixed price non-commercial voyage repair services for the USS RAFAEL PERALTA (DDG 115). The work is to be performed in Mombasa, Kenya, with a period of performance from November 12, 2026, to November 18, 2026. The scope of work includes hull maintenance such as high-pressure fresh water washing, cleaning and inspection of air conditioning and refrigeration plant condensers, rust and corrosion removal, replacement of lagging and insulation, furniture upholstery replacement, and the provision of rigging services and scaffolding. All work must adhere to NAVSEA Standard Items and SCF Part 1915 Occupational Safety and Health Standards for Shipyard Employment. Award will be granted to the lowest priced technically acceptable offeror, with technical capabilities rated as either acceptable or unacceptable. Prospective contractors must submit a completed J-1 Price Breakdown in US dollars, a draft Test and Inspection Plan, and a signed Use and Non-Disclosure Agreement to access restricted technical data. Required submission documentation includes Standard Form 18, completed Standard Form 30 amendments, and technical qualifications verified via the Attachment J-3 checklist. The deadline for proposal submission is November 2, 2026, at 13:00 CET. Post-award invoicing must be processed electronically through Wide Area WorkFlow.
Navsup Flc Sigonella Naples Office

POSTED

about 8 hours ago

DEADLINE

in 3 days
NAICS: 336611
New
Federal
Misty Barge Dry Dock Services
Solicitation # 1240BF27Q0002
Solicitation 1240BF27Q0002 is a total small business set-aside issued by the USDA-FS CSA Northwest 4 for dry dock services for the Misty Barge, currently located at Shelter Cove on Revillagigedo Island, Alaska. The scope of work includes hauling out the vessel, performing exterior hull sandblasting and painting, repairing the exterior deck and appurtenances, painting the interior hull, and cleaning bilge tanks. All painting must adhere to Preparation and Painting Specification 00300 and manufacturer recommendations, specifically utilizing PPG products. The period of performance extends from the date of award through April 1, 2027, with specific deliverables including a work schedule, coating products list, and interior bilge painting plan due shortly after the start date. Offers are due by November 6, 2026, following an extension granted by Amendment 0001. Proposals must be submitted via email as three separate attachments covering technical capability, past performance, and price. Award will be based on the most advantageous quote, with price serving as the primary evaluation factor. Technical evaluations will focus on the provided draft work schedule and proposed haul-out dates, while past performance will be assessed based on recency and relevancy within the last three years. The contractor is responsible for implementing a Quality Control Plan managed by a designated Quality Control Representative, while the government will maintain Quality Assurance through performance requirements measures.
Csa Northwest 4 Usda-Fs

POSTED

1 day ago

DEADLINE

in 7 days

General Info

NAICS

336611 - Ship Building and Repairing

Place of Performance

WA, BHR

Set-Aside

NONE

Documents

2

RFI-KYPT-23-0001-RBNFFG7 Bahrain FFG Modernization Q&A

PDF, Low priorityq-and-a
Low

RFI-KYPT-23-0001-RBNFFG7 Bahrain FFG Modernization Q&A

PDF, Low priorityq-and-a
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates
PhaseClosed
Posted

Sources Sought

Notice updated

Response deadline changed from Jun 15, 2023 to Jun 22, 2023. The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Undersea Warfare Center
Contacts1 person available
OfficeKEYPORT, WA, 98345-7610, USA
Office AddressKEYPORT, WA, 98345-7610, USA
Contacts
David Weindruch Contract Specialist

Full Description

Show more
Introduction The Naval Undersea Warfare Center Division (NUWC), Keyport is issuing this sources sought notice on behalf of the Naval Sea Systems Command (NAVSEA) International Fleet Support Program (PMS 326) as a means of conducting market research to identify potential sources having an interest in industry technologies available, and capability to support/fulfill an anticipated future requirement for the Government's need to modernize the two (2) Royal Bahrain Navy (RBN) former USN FFG-7 class frigates. Identification and verification of the company's business size (i.e., small, large) relative to NAICS Code 336611, Size Standard: 1300 employees. This request does not constitute a Request for Proposal (RFP); submission of any information in response to this announcement is purely voluntary and the Government assumes no financial responsibility for any costs incurred. Background NAVSEA conducted market research on April 28th at an Industry Day to identify and determine the interest, technical capability, and qualifications to fulfill the Government's need to modernize the two (2) Royal Bahrain Navy (RBN) former USN FFG-7 class frigates. These frigates are the RBN Sabha FFG-90 (ex-Jack Williams FFG-24) and the RBN Khalid Bin Ali FFG-91 (ex-Robert G Bradley FFG-49). NAVSEA is preparing a response to Bahrain's request for price and availability through FMS for the following system improvements: Replace the existing Combat Direction System (CDS) with Combat Management System (CMS) Replace the existing AN/SPS-49(V)4 Air Search Radar with a new 3D air search radar Replace the existing AN/SPS-55 Surface Search Radar with a new surface search radar Replace the existing Navigation Radar with a new navigation radar Replace the existing MK 92 Fire Control System and Radars with a new fire control system and radars Provide system upgrades for the MK 75 76mm Gun Mount Program Approach PMS 326 is seeking potential Systems Engineering and Integration services for the installation and integration of the replacement systems above. The below USN programs of record systems are tentatively planned as government furnished equipment (GFE) for this program, although alternatives will be considered: CMS: COMBATSS-21 or INTeACT Note: INTeACT is a well-supported UK POR. Air Search Radar: AN/SPS-77(V)3 Multi-Mission Radar (MMR) or AN/SPY-6 Surface Search Radar: AN/SPS-73(V)18 Navigation Radar: VisionMaster Fire Control System and Radars: MK 160 Gun Computer System modified to interface with MK 75 76mm Description NAVSEA needs the Systems Engineering and Integration of a new CMS, sensors, and weapon systems for the RBN. It is expected that this work will be performed at contractor facilities and in Bahrain. The estimated period of performance for these efforts would start in Fiscal Year (FY) 2026 and complete in FY 2030. Format If your organization has the potential capacity to provide the required products/capabilities identified, please provide the following information: Cover Letter should include: Organization name, address, CAGE code, Unique Identification number, email address, website address, telephone number, and size and type of ownership for the organization; Tailored capability statements addressing the particulars of this requirement; and Responses to all of the following questions in the same order as shown below. Interested contractors are requested to provide NAVSEA a Capability Statement which may include ROM cost estimates that addresses capabilities and proposes a plan to meet the Systems Engineering and Integration requirements of the modernization of the two Bahrain frigates. The Capability Statement should include and emphasize the following company qualifications and experience by addressing the following: Capabilities and experience of developing, managing and integrating the newest technology with legacy systems. Experience working directly with government organizations and other industry using government and contractor facilities for Subsystem and System Level Tests. Experience and approach for developing a comprehensive Test and Evaluation program. Facility description highlighting capabilities and obtained certifications. ROM cost estimates and schedule information for complete system installation and integration of the systems identified for the frigate modernization. Provide your overall technical approach to the requirement as outlined within this notification. Describe your approach for modernizing the RBNF CMS, sensors, and weapon systems with either the planned GFE or your recommended alternative systems. Address the overall Test and Integration approach for this task. Describe your risk management approach for execution of contract deliverables as related to cost, performance, and schedule. Include contract numbers from prior relevant past performance experience SUBMITTAL INSTRUCTIONS: Responses to this sources sought must be submitted DOD Safe to the point of contact listed at the bottom of this notice. Please limit responses to a maximum of twenty (20) pages. Proprietary information, if any, must be clearly marked. To aid the Government in its review, please segregate proprietary information. All information received that includes proprietary markings will be handled in accordance with applicable statutes and regulations. Responses to this notice will not be returned. The Government may not respond to any specific questions or comments submitted in response to this sources sought notice or information provided as a result of this sources sought notice. Any information submitted by respondents as a result of this sources sought notice is strictly voluntary. This sources sought notice is for information planning purposes, the Government will not pay or otherwise reimburse respondents for information submitted, and it is not to be construed as a commitment by the Government. All documentation shall become the property of the Government. The Government is not soliciting, nor will it accept proposals as a result of this sources sought notice. All firms responding to this sources sought notice are advised that their response is not a request to be considered for a contract award. If a solicitation is issued, it will be announced later via the Government-wide point of entry and all interested parties must respond to that solicitation announcement separately from the response to this sources sought notice. Response to this notice is not a request to be added to a bidders list or to receive a copy of a solicitation. When submitting questions, include RFI # KYPT-23-0001-RBNFFG7 in the subject line of your email: The Government may post questions and answers to the Opportunities website at https://www.sam.gov/ NOTES: Do not send hardcopies (including facsimiles), as only electronic submissions will be accepted and reviewed. Do not lock or encrypt the file you submit, or attach password- protected files. The Government will scan all files submitted and if a virus is detected, it may be grounds for rejection of the response. Cost data is not required but is requested to this RFI. Responses are requested no later than 1400 (Pacific Time) on 22 June 2023. Interested parties are instructed to submit their response electronically via the DoD SAFE application located at https://safe.apps.mil. Interested parties wishing to submit a response shall notify by email: contact@example.gov no earlier than 14 calendar days prior to the 22 June 2023 submission deadline, include in the subject line of the email - RFI-KYPT-23-0001-RBNFFG7 and in the body of the email, Company Name, Company Point of Contact (POC) and Company POC's e-mail address for contact information so the Government can generate a drop-off request email from the DoD SAFE application to be sent to the Contractor, which is valid for 14 calendar days.

More opportunities from Department Of Defense → Naval Undersea Warfare Center

Same awarding agency

NAICS: 331492
New
Federal
Silver Reutilization and Account Maintenance Service
Solicitation # N0025327Q0001
The Naval Undersea Warfare Center Division, Keyport is soliciting quotes for Silver Reutilization and Account Maintenance Services to refine silver-bearing material recovered from batteries. The primary objective is to process materials from Silver/Zinc and Silver/Chloride batteries to achieve 99.9% purity, with the resulting refined silver used to manufacture new batteries. Annual requirements include 380,000 troy ounces of high silver content material and 725,000 troy ounces of low silver content material, alongside account maintenance for 500,000 troy ounces. The government intends to award one Indefinite-Delivery, Indefinite-Quantity contract with a five-year ordering period from January 20, 2027, to January 19, 2032. The contract will utilize a combination of Firm-Fixed-Price and Fixed-Price with Economic Price Adjustment (EPA) based on the London Bullion Market Association silver price index. Award will be based on Lowest Price Technically Acceptable (LPTA) procedures, evaluating technical approach and past performance for acceptability. Key deliverables include materials processed reports, account balance reports, and quarterly progress reports. The contractor must adhere to strict environmental laws for hazardous waste disposal and maintain all necessary permits for transporting and processing silver-bearing materials. Performance will be monitored via a Quality Assurance Surveillance Plan, with a required silver return rate between 75% and 90% of the received net weight.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 238290
New
Federal
WSTF Tank Pipe Insulation
Solicitation # N0025327Q0003
The Naval Undersea Warfare Center Division Keyport is soliciting quotes under RFQ N0025327Q0003 for the installation of thermal insulation and weather-protective lagging on an outdoor run of 2-inch nominal copper piping, spanning approximately 75 to 100 linear feet. The objective is to restore thermal efficiency and protect the piping and electrical heat trace from environmental exposure, requiring 100% coverage. All work must comply with the 2018 Washington State Energy Code and OSHA safety standards, with materials rated for temperatures between 30F and 140F. The project includes verifying the integrity of the heat trace system both before and after installation and utilizing removable thermal blankets for maintenance access at valves and pumps. This requirement is a 100% small business set-aside under NAICS code 238290, with a size standard of 22 million dollars in annual revenue. The contract is a firm fixed price award to be completed within 35 calendar days from the date of award, with delivery terms set as FOB Destination. Award will be based on the best value, evaluating technically acceptable offers based on price and past performance, with equal weight given to quality and delivery. Offerors must be registered in the System for Award Management and maintain a minimum of CMMC Level 1 certification. Submissions must be sent electronically to the designated points of contact, and all invoicing will be processed through Wide Area Workflow.
Other Building Equipment Contractors

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 336412
New
Federal
Refurbishment of Torque Motor Magnetic Field Ring Assemblies
Solicitation # N0025326R7006
Solicitation N0025326R7006, issued by the Naval Undersea Warfare Center Division Keyport, is for an Indefinite-Delivery Indefinite-Quantity (IDIQ) contract focused on the refurbishment and repopulation of torque motor magnetic field ring assemblies (DMISA RINGS). The scope of work involves the depopulation of existing magnets, refurbishment including potential grinding to meet final dimensions, and the installation of new replacement magnets for plated steel and stainless steel azimuth and elevation rings. The government has established a maximum order quantity of 2,540 units, with delivery timeframes generally set at 180 calendar days after the receipt of government furnished property. The contract will be awarded using the Lowest Price Technically Acceptable (LPTA) source selection process, evaluating offerors based on technical capability, risk management, and past performance. Key requirements include compliance with NAVSEA drawings 7447999 Rev I and 7448000 Rev F, as well as strict packaging standards requiring individual polyethylene wrapping and the use of government-supplied foam. Offerors must provide JCP and CMMC certifications to access secured drawings and submit a Test and Inspection Data Sheet with every delivery. Following two amendments, the final response closing date is November 2, 2026.
Aircraft Engine and Engine Parts Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 561210
Federal
NUWC Keyport Moving Services
Solicitation # N0025327Q0002
The Naval Undersea Warfare Center Division Keyport is soliciting firm fixed price moving services under solicitation N0025327Q0002 to relocate the workspaces of 180 personnel from Building 1 to Building 894. The scope of work includes the transport of approximately 950 packed boxes, six security safes, 12 cabinets or shelving units, and other office equipment. This effort must be completed as a single consolidated evolution within five consecutive weekdays during standard working hours. The contractor is responsible for providing all labor, technical supervision, and material handling equipment, though they are specifically excluded from moving hazardous materials or individual personal electronics. This requirement is a total small business set-aside, specifically targeting Women-Owned Small Businesses and Service-Disabled Veteran-Owned Small Businesses under NAICS code 561210. To be considered technically acceptable, offerors must provide FOB Destination pricing, possess at least CMMC Level 1 certification with a valid Unique Identifier, and meet all security and background check requirements for base access. Award will be based on a best-value trade-off analysis considering price and past performance, with equal weight given to quality and delivery. All quotes must be submitted digitally via email by November 5, 2026, and must include completed representations and certifications via the System for Award Management.
Facilities Support Services

POSTED

8 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS