BAND ASSEMBLY BRAKE

This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR Part 12 - Acquisition of Commercial Products and Commercial Services | Acquisition.GOV and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. Request for Quote number in header applies and is used as the solicitation number. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87, effective, 7 March 2016. It is anticipated that a competitive price purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, (vendor must have an active registration in SAM.Gov prior to award) which if timely received, shall be considered by this agency. Payments are NET 30 and will be made in accordance with the FAR 52.232-25 Prompt payment clause 52.232-25 Prompt Payment. | Acquisition.GOV. All acquisitions expected to exceed $10k can also be found on SAM.GOV under the same solicitation/RFQ listed in the header. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order. IMPORTANT**PLEASE READ: It is the Government's belief that only the OEM, SUPERIOR-LIDGERWOOD-MUNDY CORPORATION and/or their authorized distributors, can obtain the required technical and engineering data and genuine OEM parts required to successfully provide these items. Authorized distributors having the expertise and required capabilities to provide these items are invited to submit a quote. If you submit a quote for this solicitation, IT MUST include a letter from the OEM, SUPERIOR-LIDGERWOOD-MUNDY CORPORATION, verifying your company is an authorized distributor. The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items: Vendor shall provide: VENDOR NAME: VENDOR UEI: ALL ITEMS LISTED IN THE BELOW PARTS LIST AND NO SUBSTITUTIONS WILL BE AUTHORIZED WITHOUT APPROVAL FROM USCG SFLC TECHNICAL EXPERTS. ITEM 1 DESCRIPTION: BAND ASSEMBLY BRAKE NSN: 3950 01-598-3240 PART NO.: C2-423-0005 MFG: SUPERIOR-LIDGERWOOD-MUNDY CORP DESCRIPTION: BRAKE ASSEMBLY QUANTITY: 4 EA UNIT PRICE: ________ TOTAL: _________ PACKAGING REQUIREMENTS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1 E METHOD 10, CUSHIONED IN A BUBBLE WRAP, AS NEEDED, UTILIZING CUSHIONING, BLOCKING AND BRACING AND BAGGED. BAG CLOSURE SHALL BE AFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464. ALL PACKED IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS 1 WOOD-CLEATED PANELBOARD SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX. MARKING IAW MILSTD- 129R. VENDORS PROMISED DELIVERY DATE: _____________________ If unable to meet required delivery date, please provide DD: ________ ITEM 2 DESCRIPTION: CONNECTING ROD, BRAK NSN: 3950 01-598-3151 PART NO.: B2-065-0012 MFG: SUPERIOR-LIDGERWOOD-MUNDY CORP DESCRIPTION: CONNECTING ROD, BRAKE P/N: B2-065-0012 NSN: 01-598-3151 QUANTITY: 4 EA UNIT PRICE: ________ TOTAL: _________ PACKAGING REQUIREMENTS: PACKAGING SPECS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHER-RESISTANT PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX. BAG CLOSURE SHALL BE AFFECTED BY HEATSEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. MARKING IAW MIL-STD-129R. END ITEM USE: NSC/ WMSL BOAT-HDLG STERN BOAT-RECOVERY SYSTEM WINCH BRAKE VENDORS PROMISED DELIVERY DATE: _____________________ ITEM 3 DESCRIPTION: SPRING, HELICAL, COMPRESSION NSN: 5360 01-672-8829 PART NO.: P2-965-0024 MFG: SUPERIOR-LIDGERWOOD-MUNDY CORP DESCRIPTION: SPRING, HELICAL, COMPRESSION P/N: P2-965-0024 QUANTITY: 20 EA UNIT PRICE: ________ TOTAL: _________ PACKAGING REQUIREMENTS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 FIBERBOARD BOX. BAG CLOSURE SHALL BE AFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464. MARKING IAW MIL-STD-129R VENDORS PROMISED DELIVERY DATE: _____________________ ITEM 4 DESCRIPTION: BRAKE BAND ASSEMBLY NSN: 3990 01-713-9550 PART NO.: C2-423-0007 MFG: SUPERIOR-LIDGERWOOD-MUNDY CORP DESCRIPTION: BRAKE ASSEMBLY QUANTITY: 2 EA UNIT PRICE: ________ TOTAL: _________ PACKAGING REQUIREMENTS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1 E METHOD 10, CUSHIONED IN A BUBBLE WRAP, AS NEEDED, UTILIZING CUSHIONING, BLOCKING AND BRACING AND BAGGED. BAG CLOSURE SHALL BE AFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464. ALL PACKED IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS 1 WOOD-CLEATED PANELBOARD SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX. MARKING IAW MIL-STD-129R VENDORS PROMISED DELIVERY DATE: _____________________ ITEM 5 DESCRIPTION: SPRING, HELICAL,COMPRESSION NSN: 5360 01-598-3504 PART NO.: P2-965-0022 MFG: SUPERIOR-LIDGERWOOD-MUNDY CORP DESCRIPTION: SPRING, HELICAL, COMPRESSION QUANTITY: 8 EA UNIT PRICE: ________ TOTAL: _________ PACKAGING REQUIREMENTS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 FIBERBOARD BOX. BAG CLOSURE SHALL BE AFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D- 3464. MARKING IAW MIL-STD-129R VENDORS PROMISED DELIVERY DATE: _____________________ ITEM 6 DESCRIPTION: ACTUATOR, BRAKE RH NSN: 3010 01-598-4817 PART NO.: A2-411-0004 MFG: SUPERIOR-LIDGERWOOD-MUNDY CORP DESCRIPTION: WEIGHT: 6 LBS DIMENTION: 2' X 2' X 2' ACTUATOR, BRAKE RH; QUANTITY: 2 EA UNIT PRICE: ________ TOTAL: _________ PACKAGING REQUIREMENTS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX. BAG CLOSURE SHALL BE AFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. END USE: USED ON USCGC 418 FT WMSL, SHIPS STERN BOAT LAUNCH SYSTEM CARRIAGE WINCH If unable to meet required delivery date, please provide DD: ________ ITEM 7 DESCRIPTION: ACTUATOR, BRAKE LH NSN: 3010 01-598-4822 PART NO.: A2-411-0003 MFG: SUPERIOR-LIDGERWOOD-MUNDY CORP DESCRIPTION: ACTUATOR, BRAKE LH QUANTITY: 1 EA UNIT PRICE: ________ TOTAL: _________ PACKAGING REQUIREMENTS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX. BAG CLOSURE SHALL BE AFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. END USE: USCGC WMSL 418' NSC - STERN BOAT LAUNCH SYSTEM CARRIAGE WINCH If unable to meet required delivery date, please provide DD: ________ ITEM 8 DESCRIPTION: BUSHING, SLEEVE NSN: 5365 01-697-0743 PART NO.: P2-909-0047 MFG: SUPERIOR-LIDGERWOOD-MUNDY CORP DESCRIPTION: ACTUATOR, BRAKE LH QUANTITY: 40 EA UNIT PRICE: ________ TOTAL: _________ PACKAGING REQUIREMENTS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 FIBERBOARD BOX. BAG CLOSURE SHALL BE AFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464.MARKING IAW MIL-STD-129R If unable to meet required delivery date, please provide DD: ________ ITEM 9 DESCRIPTION: ACTUATOR, BRAKE (MODIFED) NSN: 3950 01-598-3259 PART NO.: 411006-1-1-1 MFG: SUPERIOR-LIDGERWOOD-MUNDY CORP DESCRIPTION: ACTUATOR, BRAKE (MODIFIED, CENTERLINE WINCH) QUANTITY: 2 EA UNIT PRICE: ________ TOTAL: _________ PACKAGING REQUIREMENTS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1 E METHOD 10, CUSHIONED IN A BUBBLE WRAP, AS NEEDED, UTILIZING CUSHIONING, BLOCKING AND BRACING AND BAGGED. BAG CLOSURE SHALL BE AFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OFBAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464. ALL PACKED IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS 1 WOOD-CLEATED PANELBOARD SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX. MARKING IAW MILSTD-129R If unable to meet required delivery date, please provide DD: ________ PACKAGE LABEL MUST INCLUDE: ITEM NAME: PART NUMBER: NSN: QNTY: (EXAMPLE 1 EA) COND-A CONTRACT NUMBER / ORDER NUMBER POC: JOHN KANE E-MAIL: contact@example.gov PH: +1 (555) 000-0000 REQUIRED DELIVERY DATE: 11/05/2024 Partial shipment is acceptable. - NO SUBSTITUTIONS. Are you able to meet packaging requirements? Yes ___ No ____ ** Total cost shall have delivery and any Freight charges to zip code 21226 included. ** ** SHIPPING: FOB DESTINATION REQUIRED. ** SHIP TO: USCG SURFACE FORCES LOGISTICS CENTER 2401 HAWKINS POINT ROAD RECEIVING ROOM- BUILDING 88 BALTIMORE, MD 21226 Preparation For Delivery All material must be shipped to U.S. Coast Guard Surface Forces Logistics Center, 2401 Hawkins Point Road, Receiving Room- BLDG 88, Baltimore, MD, 21226 for this Purchase Order. Material must be accompanied by an itemized packaging list securely attached to the outside of the shipment. All packing lists shall cite the Purchase Order Number with the packaging in such a manner to ensure identification of the material provided. Material shall be packed for shipment using Military Packaging, for examples in packaging please reference MIL-STD-2073-1E. Material must be packaged in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply course to Surface Forces Logistics Center locations. Packaging shall provide adequate protection for warehouse storage and shipments from the warehouse. All Deliveries are to be made Monday through Friday between the hours of 8am to 3pm. Please make sure that any changes in Delivery Timeframes or tracking information get sent to contact@example.gov U.S. COAST GUARD APPROVED LABEL SHOULD HAVE THE FOLLOWING: NATIONAL STOCK NUMBER (NSN) ITEM NAME PART NUMBER PURCHASE ORDER NUMBER THE WORDS - COAST GUARD SFLC MATERIAL CONDITION (A) QUANTITY AND UNIT OF ISSUE (I.E) (1-EA) Invoicing In IPP It is now a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov. All invoices must contain the following information: CG contract number, vendor's invoice number, vendor's UEI, UEI & TINs number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON-PO IN IPP). To submit an invoice, vendor must have access to www.ipp.gov. Additionally, a copy of the invoice must also be sent to the PO Issuing Office at: contact@example.gov