Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

BL112-26 Purchase of Law Enforcement Duty Gear on an Annual Contract

Active

PE-77023-NONST-2027-000000679State & Local

Response Deadline08/06/2026, 07:50:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Gwinnett County Government in Georgia is soliciting bids for an annual contract to purchase law enforcement duty gear under solicitation number PE-77023-NONST-2027-000000679, which was posted on July 22, 2026, with a response deadline of August 6, 2026. This solicitation is intended for state, local, and educational government entities and seeks suppliers capable of providing consistent, high-quality duty equipment to meet the operational needs of law enforcement personnel across the county. The contract is structured for annual renewal and requires vendors to fulfill ongoing supply requirements without interruption. All proposals must be submitted by the specified deadline and should include detailed specifications on products, pricing, delivery schedules, and compliance with applicable standards. Chelsey Ward serves as the primary point of contact for inquiries and can be reached via phone at 770-822-7788 or email at chelsey.ward@gwinnettcounty.com. The place of performance is limited to the state of Georgia, and while no specific set aside or NAICS code is listed, interested parties must be prepared to meet all performance and logistical demands as outlined in the solicitation documentation accessible through the provided UI link.

General Info

Gwinnett County seeks annual law enforcement duty gear suppliers with bids due August 6, 2026, for Georgia-based delivery.

Agency

Georgia → Gwinnett County GovernmentView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

(1)

BL112_26 INV.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedJul 22

Solicitation

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 07:50:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeorgia → Gwinnett County Government

Contacts1 person available

OfficeN/A

Organization / Agency

Georgia → Gwinnett County Government

View Agency Profile

Office AddressN/A

Contacts

Chelsey Ward

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Purchase of Law Enforcement Duty Gear on an Annual Contract

Similar Contracts

Same NAICS industry code

The Supply and Installation of a 170lbs Commercial Steam Dryer for the Falmouth Public General Hospital| 26/27-MAINFH-022The contract pertains to the supply and installation of a 170-pound commercial steam dryer for the Falmouth Public General Hospital under the jurisdiction of the Western Regional Health Authority, part of the Government of Jamaica. The solicitation, identified by number 1317/9371, was posted on July 22, 2026, with a firm deadline for responses set for August 5, 2026, at 6:00 PM. The equipment is intended to enhance laundry operations at the hospital, ensuring efficient and high-capacity drying capabilities required for institutional use. Installation must be performed at the hospital’s designated location, and all work must comply with operational and safety standards relevant to healthcare facilities. The contract is open to eligible suppliers without a specific set-aside designation, allowing broad participation from vendors capable of delivering and installing commercial-grade steam dryers. All submissions must be received by the stated deadline, and no further organizational details or contact points are provided within the solicitation data.

Western Regional Health Authority

POSTED

about 15 hours ago

DEADLINE

Servo- Air HA ***SOLE SOURCE*** THIS IS NOT A SOLICITATIONSalt Lake Community College intends to procure six Servo Air HA ventilators through a sole source procurement from Getinge USA Sales, LLC, without seeking competitive bids. This action is justified under the Utah Procurement Code due to the exclusive compatibility requirements of the Respiratory Therapy Program, which relies entirely on the Servo ventilator platform for laboratory instruction, simulation-based education, and clinical preparedness. The newly acquired ventilators must seamlessly integrate with existing Servo equipment, including IngMar Medical Internal Simulated Lungs, to ensure consistent training, standardized workflows, and continuity in student learning across courses and clinical environments. Introducing an alternative ventilator platform would disrupt instructional efficiency, require redundant faculty training, and complicate competency evaluations by forcing learners to navigate multiple, incompatible systems. Getinge is the sole provider of Servo-branded ventilators, as the platform is proprietary and cannot be replicated by competitors such as Hamilton, Dräger, or Puritan Bennett. The program's decision is further grounded in regional workforce alignment, as hospitals throughout the college’s service area predominantly use Servo ventilators, making proficiency in this specific system critical for student employability. Transitioning to a different manufacturer would incur prohibitively high costs through curriculum redevelopment, retraining, loss of existing instructional investments, and the operational burden of maintaining multiple incompatible systems. Responses from other vendors are invited solely to assess whether competition is feasible, but will not be treated as formal proposals. All submissions must demonstrate unequivocally the ability to meet the specified compatibility and functionality requirements and must be submitted to Brandon Ostrander by the stated deadline. The decision to proceed with the sole source award rests solely with Salt Lake Community College Purchasing Services.

POSTED

about 16 hours ago

DEADLINE

COMPARATOR, COLORThe contract solicits a single unit of a color comparator designed for measuring chlorine and pH levels in swimming pools and communal water supplies, identified by NSN 6630-01-027-3914. The item must meet stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions. The comparator must have a shelf life of 36 months, and no more than five months may have elapsed between the date of manufacture and the date of delivery to the government. Labels on the product must clearly display the NSN, manufacturer name and CAGE code, date of manufacture, expiration or retest date, and the contract or lot number. Bidders are required to specify the source and part number being supplied, and the delivery deadline is 20 days after order placement. The solicitation, issued under SPE2DH-26-T-5411, was posted on July 22, 2026, with responses due by July 29, 2026, and the place of performance is Hampton, Virginia, 23665-2040. The contracting activity falls under the Department of Defense, Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

RESUSCITATION KIT, MOUTThe resuscitation kit is a pediatric-specific, latex-free Brosewell Hinkle system designed for emergency use, containing a complete set of essential resuscitation components including two procedural modules in seven pouches, a Broselow tape, two manual resuscitators, four cuff masks, three disposable blood pressure cuffs, one gauge, two Magill forceps, and two laryngoscope handles. It is configured as a comprehensive mouth-to-mask or oronasal resuscitation solution intended for rapid deployment in critical care scenarios. The kit must have a minimum 24-month shelf life, with no more than three months elapsed from the date of manufacture to the date of government delivery, ensuring freshness and operational readiness upon receipt. Each kit is identified by NSN 6515-01-513-9276 and must be labeled with the manufacturer’s name and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The kit complies with DLA packaging requirements and technical standards referenced under RA001, RP001, and RQ011, ensuring adherence to federal procurement protocols. The contract solicitation number is SPE2DS-26-T-259Y, with a 20-day delivery window following award, and the item is to be delivered to Binghamton, NY, under a federal acquisition by the Department of Defense, Medical Supply Chain, as part of a single-unit purchase under purchase request 7017570635.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

DRAPE, SURGICALThe surgical drape specified is a disposable, nonwoven fabric half sheet measuring approximately 44 by 72 inches, packaged in units of 20 per package, with a unit of issue designated as PG. It must conform to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, superseding outdated military specifications such as MIL-D-36917 and MIL-STD-105, which are replaced by current commercial and industry standards including ASTM D3951 for commercial packaging and ANSI/ASQ Z1.4 for sampling procedures. The drape must be sterilized and packaged in sealed, peel-open or tear-open anti-static bags to maintain sterility, with each unit containing 20 drapes. Folding must follow a precise fan-fold technique ending in a tuck and tab, and all cut edges must be smooth and straight without roughness or raggedness. The drape must exhibit low-surface-tension fluid repellency, including alcohol repellency tested per INDAs standard 80.9-74 (R77), and must be marked clearly with class, size, and for Class A split sheets, the legend “SPLIT” with an indicating arrow. All packaging and labeling must adhere to Medical Marking Standard No. 1, replacing MIL-STD-129, and must include lot numbers and sterility assurances. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product, except under narrowly defined exceptions. The item carries a 36-month shelf life, extendable, and is subject to FDA regulation. Deliveries are to be made FOB destination within 20 days, with strict requirements for traceable freight shipping and no use of parcel post. The contract specifies a single unit quantity at a fixed price, with zero tolerance for variance, and requires compliance with all DLA packaging directives, including palletization standards and marking requirements as outlined in RP001.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

TEST SET, WATER TURBThe contract specifies the procurement of two each of a water turbidity meter test set compliant with ISO 7027, featuring a four-key interface and weighing 350 grams. The device measures turbidity from 0 to 1000 FTU (NTU) using an infrared LED light source and incorporates Good Laboratory Practice circuitry that automatically stores and retrieves the last calibration data, displaying the time and date of calibration with a single key press to support accurate calibration scheduling. It includes an auto shut-off function that powers down the unit after five minutes of inactivity to conserve battery life. The kit is supplied with a measurement cuvet and cap, four 1.5V AA batteries, and an instruction manual. The item is identified by NSN 6630-01-490-7581 and must be delivered within 20 days to Fort Bliss, Texas. The item is classified as a TYPE I (CODE F) shelf-life item with a strict six-month non-extendable shelf life, requiring that no more than three weeks have elapsed from the manufacturer's date to the date of government receipt. Packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and include the date of manufacture, expiration or retest date, contract number, and lot number. Packaging must be commercial-grade, sealed, and suitable for safe transport by common carriers at the lowest possible rate. The acquisition falls under DLA Master List technical and quality requirements, incorporates DLA packaging standards, and applies to all medical acquisitions, with additional compliance for covered defense information and removal of government identification from non-accepted supplies. The solicitation number is SPE2DH-26-T-5421, issued by the Department of Defense's Medical Supply Chain FSH, with a response deadline of July 29, 2026, and primary point of contact Tina Vu.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

LIDOCAINE HYDROCHLO

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 20 hours ago

DEADLINE

END PLUG, VISCOMETERThe item specified is an end plug for a viscometer, designated for use at an oil test center and identified by the NSN 6630-01-498-9904, with a quantity of one unit to be delivered within 20 days of award. This procurement is issued under solicitation SPE2DH-26-T-5393, posted on July 22, 2026, with responses due by July 29, 2026, and falls under NAICS code 423450 for wholesale trade of industrial equipment. The requirement is managed by the Department of Defense through the Medical Supply Chain FSH, with delivery to an FPO address. Technical and quality specifications referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must meet DLA standards, and any non-accepted supplies must have all government identification removed. The primary point of contact is Tina Vu, reachable via email and phone provided in the contract data.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

BOTTLE, SCREW CAPThe contract specifies the procurement of a single cylindrical 4 oz (120 ml) bottle with a screw cap, identified by NSN 6640-00-500-0276 and Millipore part number XX65-047-09, with no substitutions allowed. The item is made of clear bluish-pink tinted polyvinylidene chloride (PVC) and is not regulated by the FDA. Packaging must comply with DLA Packaging Requirements for Procurement (RP001), requiring each unit to be sealed in a protective container that prevents damage during handling, and all shipments must use commercially suitable exterior containers for safe delivery via common carrier at the lowest rate to the destination. Marking must conform to Medical Marking Standard No. 1, superseding MIL-STD-129, and packaging must adhere to ASTM D3951 unless the item is hazardous under FED-STD-313, in which case IP025 requirements apply. All DLA Master List of Technical and Quality Requirements take precedence over general commercial standards. The unit of issue is each (EA), with a quantity of one unit, delivered FOB destination within 20 days of contract award. Delivery is to Marine Aviation Logistic Squadron MALS-24 at MCAS Kaneohe Bay, Hawaii, with freight and parcel post addresses provided. The purchase request number is 7017575437, and the solicitation number is SPE2DH-26-T-5396 with a response deadline of July 29, 2026, and an original required delivery date of July 24, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

DIAPER, INFANT'S

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

DISPOSAL CONTAINER, HYP

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

GOWN, HOSPITAL PERSO

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

More opportunities from Georgia → Gwinnett County Government

Same awarding agency

BL114-26 Provision of TeamViewer Licenses and Support on a Multi-Year ContractGwinnett County Government is soliciting proposals for the multi-year provision of TeamViewer licenses and associated technical support services under solicitation number PE-77023-NONST-2027-000000680, posted on July 22, 2026, with responses due by August 12, 2026. The contract is aimed at securing a reliable and scalable remote support solution to enhance IT operations across county departments, with the requirement that all licenses and support services be maintained for the duration of the agreement. The work is to be performed in Georgia, and the primary point of contact for inquiries is Bethany White, reachable via email or phone provided in the solicitation. The solicitation does not specify a set-aside type or NAICS code, indicating it is open to all qualified vendors regardless of business size or categorization. Proposals must address the full scope of license deployment, ongoing technical assistance, and any additional features necessary to meet the county’s remote access and support requirements.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

about 17 hours ago

DEADLINE

PA036-26 Purchase of File Folders on an Annual ContractGwinnett County Government in Georgia is soliciting bids for an annual contract to purchase file folders under solicitation number PE-77023-NONST-2027-000000678, which was posted on July 21, 2026, with a response deadline of July 31, 2026. This solicitation is targeted at state, local, and education entities, and the contract will support the county’s administrative and recordkeeping needs through a recurring supply of file folders. The place of performance is specified as Georgia, though no exact city or zip code is provided. Blake Christopher serves as the primary point of contact, reachable via phone at 770-822-8820 or email at blake.christopher@gwinnettcounty.com. Interested vendors must submit their proposals through the official portal linked in the solicitation details, and there is no set-aside designation specified for this procurement.

Stationery and Office Supplies Merchant Wholesalers

POSTED

DEADLINE

RP021-26 North Gwinnett Freight Cluster Planning StudyThe Gwinnett County Government is soliciting proposals for the North Gwinnett Freight Cluster Planning Study, a $250,000 project funded by $200,000 in federal funds and a $50,000 local match, with no additional funding anticipated. The solicitation, identified as PE-77023-NONST-2027-000000677, was posted on July 21, 2026, with proposals due by August 14, 2026, and must be submitted in sealed physical packages to the Gwinnett County Purchasing Division; electronic, faxed, or emailed submissions are prohibited. The scope requires comprehensive engineering and planning services to develop a strategic freight cluster plan, including stakeholder engagement, transportation system inventory and assessment, development of a vision and goals document, preparation of a best practices report, and submission of detailed progress reports and management plans. Deliverables must comply with federal regulations including 23 CFR, 29 CFR 1926, 2 CFR §200.333, and EPA standards, along with applicable state and local safety and procurement rules. Proposals are evaluated using a best-value trade-off approach based on technical merit, with experience and qualifications each weighted at 25 points, followed by schedule and understanding and approach at 20 points each, references at 10 points, an optional interview at 10 points, and cost proposal at 5 points, for a total of 115 points. In the event of a tie, the lowest-cost offeror will be selected. The contractor must perform at least 30% of the work directly and obtain prior written approval for any subcontracting; all subcontracts must flow down the prime contract terms. Insurance requirements are stringent, mandating primary, non-contributory coverage, special form equipment insurance with Gwinnett County named as loss payee, waiver of subrogation rights, and verification of compliance before work commences. Ownership of all deliverables, data, and documents created under the contract vests exclusively in Gwinnett County. Contractors must certify compliance with the Buy American Act, non-collusion, and lobbying regulations, with affirmative lobbying responses triggering submission of Standard Form-LLL. No fixed delivery schedule, contract type, or specific payment office or COR/COTR designation is provided; payment will be made upon receipt of a detailed invoice via electronic

Process, Physical Distribution, and Logistics Consulting Services

POSTED

DEADLINE

BL104-26 Purchase of Ballistic HelmetsGwinnett County Government in Georgia is soliciting bids for the purchase of ballistic helmets under solicitation number PE-77023-NONST-2027-000000676, with the opportunity posted on July 21, 2026, and responses due by August 19, 2026. The contract is classified as a SLED procurement, indicating it is directed toward state, local, or educational entities, and is expected to fulfill public safety equipment needs within the county. All deliveries and performance are to occur in Georgia, with no specific city or zip code designated for the place of performance. Diana Turner serves as the primary point of contact, reachable via email at diana.turner@gwinnettcounty.com or phone at 770-822-8727, and should be consulted for further details or questions regarding the solicitation. Interested parties must submit proposals through the official online portal linked in the solicitation, though no set-aside provisions or NAICS codes have been specified for this procurement.

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

IWQ 134684F Purchase of Stamp and Seal MachinesGwinnett County Government in Georgia is soliciting bids for the purchase of stamp and seal machines under solicitation number PE-77023-NONST-2027-000000675, with the opportunity posted on July 21, 2026, and responses due by July 29, 2026, at 7:50 PM Eastern Time. This procurement is classified as a SLED procurement, indicating it is targeted toward state, local, or educational entities, and no set-aside provisions are specified. The contract is intended to equip county operations with equipment necessary for official stamping and sealing functions, with performance expected to occur within the state of Georgia. Blake Christopher serves as the primary point of contact, reachable via email at blake.christopher@gwinnettcounty.com or by phone at 770-822-8820. Interested vendors must submit their proposals through the designated state procurement portal linked in the solicitation.

Office Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of 8" Hymax 2-Flange AdaptorsGwinnett County Government is soliciting bids to supply thirty units of 8-inch Hymax 2-Flange Adaptors, model 8.54–9.84, or approved equivalents suitable for high-bore industrial piping systems. The requirement falls under NAICS code 332999 and is classified as a subcontract opportunity with no set-aside designation. Bids must be submitted by the response deadline of July 24, 2026, at 7:49 PM, following the posting date of July 17, 2026. The contract is part of a broader procurement initiative managed through the Georgia state procurement system, with performance expected to support infrastructure needs within the county’s industrial piping applications. All responses must meet the specified technical requirements and be submitted via the official procurement portal linked in the solicitation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of 6" Hymax 2-Flange AdaptorsGwinnett County Government is seeking suppliers to provide thirty units of 6-inch Hymax 2-Flange Adaptors, model 6.42–7.68, or an approved equivalent, for use in large-diameter piping systems. The contract is structured as a subcontract and falls under the NAICS code 332999, which covers other miscellaneous fabricated metal product manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, at 7:49 PM. While specific performance location and point of contact details are not provided, the contract is tied to official procurement systems operated by the Georgia Department of Administrative Services. Suppliers must ensure compliance with all technical specifications and submit proposals prior to the deadline to be considered for award.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of 4" Hymax 2-Flange AdaptorsGwinnett County Government is seeking to procure thirty units of 4-inch Hymax 2-Flange Adaptors, model 4.25–5.63, or approved equivalents for use in industrial piping systems. The solicitation is issued as a subcontract under NAICS code 332999, with a response deadline of July 24, 2026, and was posted on July 17, 2026. The items must meet specified technical requirements and may include acceptable alternatives as long as they are approved substitutes. The contract is intended for delivery to a location within Georgia, though specific city or zip details are not provided. Interested vendors must submit proposals by the stated deadline to be considered for award, and all responses are expected to align with the county’s procurement standards for industrial components.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of 3" Hymax 2-Flange AdaptorsGwinnett County Government is seeking to procure thirty units of 3-inch Hymax 2-Flange Adaptors, specifically model 3.46–4.33, or approved equivalents, for use in industrial piping systems. The contract is structured as a subcontract and falls under NAICS code 332999, indicating it pertains to other fabricated metal product manufacturing. The solicitation was posted on July 17, 2026, with a firm response deadline of July 24, 2026, at 7:49 PM, leaving a limited window for interested suppliers to submit proposals. While no set-aside provisions are specified, the procurement is open to all eligible vendors capable of meeting the technical requirements. The place of performance and point of contact details are not provided, but the primary reference for submissions and further information is the official state procurement portal link associated with the event number PE-77023-NONST-2027-000000674.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

IWQ 132535 Flange AdaptorsGwinnett County Government in Georgia is soliciting bids for Flange Adaptors under contract number IWQ 132535, with the solicitation issued through PE-77023-NONST-2027-000000674. The opportunity was posted on July 17, 2026, and responses are due by July 24, 2026, at 7:49 PM Eastern Time. This solicitation is categorized under the SLED government sector and does not specify a set-aside type or NAICS code. All performance will take place within the state of Georgia, and the primary point of contact for inquiries is Jenny Coleman, who can be reached via email at jenny.coleman@gwinnettcounty.com or by phone at 770-822-8734. Additional details and submission instructions can be accessed through the official Georgia procurement portal linked in the contract data.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Georgia-Based Manufacturing Preference FulfillmentGeorgia-based manufacturers or assemblers are eligible to supply PAPR kits or cartridges under a subcontract opportunity with Gwinnett County Government, which offers a 10% price preference for locally produced goods under Georgia’s local procurement rules. The solicitation targets companies engaged in the production or assembly of respiratory protection equipment, with the NAICS code 339113 indicating the classification for surgical and medical instrument manufacturing. Bidders must demonstrate their Georgia manufacturing or assembly capability to qualify for the price preference, and responses are due by July 24, 2026, with the opportunity posted on July 17, 2026. The contract does not specify a set-aside classification or point of contact details, but performance is expected to support county operations within Georgia, and interested parties must register and submit through the state’s procurement portal using the provided link.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Compliance & Technical Documentation SupportThe contract requires the preparation and submission of comprehensive technical compliance documentation to meet regulatory and state-specific requirements, including NIOSH certifications, detailed product data sheets, equivalency justifications, and Georgia state compliance affidavits. This work supports the delivery of products or services that must adhere to stringent safety and regulatory standards, particularly within the public sector procurement framework managed by Gwinnett County Government in Georgia. The scope centers on ensuring all technical materials are accurate, complete, and compliant with applicable federal and state mandates, with a focus on documentation that validates product equivalency and regulatory adherence. The opportunity is structured as a subcontract with a NAICS code of 541690, indicating it falls under other scientific and technical consulting services. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, suggesting a tight turnaround for proposers to compile and submit necessary documentation. While no specific set-aside or organizational type is designated, the work is performed for a government entity in Georgia, and the place of performance is tied to the state, indicating that all deliverables must align with Georgia’s regulatory environment and procurement expectations. Participation requires expertise in regulatory compliance, technical writing, and familiarity with NIOSH and state affidavit procedures.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE