Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BLADDER, ACCUMULATOR, HY

Active
SPE7M4-26-T-327CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of three hydraulic accumulator bladders, identified by NSN 2090-01-473-0955 and part numbers 95-00500 and 95-00515 from Young Engineering & Manufacturing, Inc., under solicitation SPE7M4-26-T-327C. Delivery is required FOB origin with a 165-day delivery window following receipt of order, with the original delivery date set for October 24, 2026, and a need ship date of February 2, 2027. The item is classified as a critical application item and must comply with strict packaging standards under MIL-STD-2073-1E, including specific codes for preservation, wrapping, unit containers, and palletization per DLA Packaging Requirements RP001. Marking must adhere to MIL-STD-129 with no special marking required. The contract mandates full compliance with DLA’s Master List of Technical and Quality Requirements, incorporating all referenced 'R' and 'I' numbered specifications, and prohibits the intentional introduction of mercury or mercury-containing compounds unless explicitly exempted for functional uses such as batteries, sensors, or weapon systems, with required secondary containment for portable devices. The product must also avoid hexavalent chromium and comply with the Buy American Act and Berry Amendment, with a reduced $150,000 threshold applied. The contract enforces robust cybersecurity and information safeguarding requirements under DFARS 252.204-7012 and DFARS 252.240-7997, requiring compliance with NIST SP 800-171 and reporting of cyber incidents. Contractors must submit a Safety Data Sheet for any hazardous materials prior to award, meeting 29 CFR 1910.1200(g) and Federal Standard No. 313, with failure to provide this resulting in automatic disqualification. The offeror must complete all required representations including small business status, HUBZone eligibility, and compliance with restrictions on covered defense telecommunications equipment and former DoD official compensation. Inspection and acceptance occur at the destination, with electronic invoicing and receiving reports required via the Wide Area WorkFlow system. All shipments must be delivered to the specified DLA distribution facility in New Cumberland, Pennsylvania, and contractors must register with DLA’s AMPS system to access

General Info

Three bladder accumulators at $3 each, delivered FOB origin by Feb 2, 2027, to New Cumberland, PA, per MIL-STD and DLA guidelines.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

114119 - Other Marine FishingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-327C Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BLADDER,ACCUMULATOR,HYDRAULIC
BLADDER,ACCUMULATOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
YOUNG ENGINEERING & MANUFACTURING, INC. 0GFE1 P/N 95-00500 ITEM 2
YOUNG ENGINEERING & MANUFACTURING, INC. 0GFE1 P/N 95-00515
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017776718 0001 EA 3.000
NSN/MATERIAL:2090014730955
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M4-26-T-327C
SECTION B
PR: 7017776718 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/02/2027 Original Required Delivery Date:10/24/2026
SPE7M4-26-T-327C NSN/Part Number: 2090-01-473-0955 Quantity: 3 EA Purchase Request: 7017776718QTY: 3 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 114119
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7M4-26-T-330E
This contract is for the procurement of 14 mounting plates, identified by NSN 2040-01-716-3974, under solicitation number SPE7M4-26-T-330E. The order is issued by the Department of Defense Fluid Handling Division with a required delivery date of February 25, 2027, and a delivery window of 164 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Environmental restrictions are in place, prohibiting the intentional addition of mercury or mercury-containing compounds and banning the use of Class I ozone-depleting substances during manufacturing and testing unless written approval is granted by the contracting officer.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 114119
New
DIBBS
WINDOW, MARINE
Solicitation # SPE7M4-26-T-291R
The contract is for the procurement of two marine windows identified by NSN 2090-01-383-9838 and part number KS-24730-21S, supplied by CORNELL-CARR CO., INC. The item must be delivered within 20 days to the KURE REPAIR AND SUPPLY FACILITY in Japan under FOB Origin terms, with no variance allowed in quantity. All packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, cleaning, and drying, and marking must adhere to MIL-STD-129 with no special marking codes required. Palletization follows DLA packaging requirements, and the shipment must be handled by SEAMODAL TRANSPORT CORPORATION. The windows are subject to DLA’s master list of technical and quality requirements, and the contractor must maintain CMMC Level 2 Cybersecurity Maturity Model Certification via self-assessment. Government identification must be removed from any non-accepted supplies, and the items are subject to inspection and acceptance at the origin point. The contract was issued under solicitation SPE7M4-26-T-291R with an original required delivery date of December 1, 2023, and the point of contact is Rory O’Reilly of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 114119
New
DIBBS
COVER, BOAT
Solicitation # SPE7M4-26-T-295Z
The contract is for the procurement of eight boat covers identified by NSN 2040-01-653-2285 and part number 40038, colored gray, under solicitation SPE7M4-26-T-295Z. Delivery is required within 215 days of the contract award, with a specified delivery date of March 14, 2027, and all items must be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while fully adhering to the DLA Master List of Technical and Quality Requirements, which supersede all other standards. Packaging and labeling must follow MIL-STD-129, and palletization must meet DLA Packaging Requirements for Procurement. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specifications. The unit of issue is each, priced at $8.00 per unit, totaling $64.00. The destination for delivery is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and the procurement is a total small business set-aside under NAICS code 114119 issued by the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 114119
New
DIBBS
CONTROL BOX, WINDSHIELD
Solicitation # SPE7M4-26-T-330S
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 114119
New
Federal
20--SHOE,DOG,DOOR,MARIN
Solicitation # SPE7M426T306N
The contract pertains to the procurement of one unit of NSN 2040016679180, a shoe dog door marine, to be delivered to W1A8 DLA DISTRIBUTION within 168 days after award. Only approved sources—24403 SP23022R, 96169 78-00-1006A, and 96169 H542-1703-54—are eligible to respond, though all responsible sources may submit quotes if received on time. The solicitation is issued as an RFQ with no hard copies available and no specifications, plans, or drawings provided. Quotes must be submitted electronically via the designated portal, and responses must arrive by the deadline of August 17, 2026. This is a Small Business Set Aside under NAICS code 114119, managed by the Department of Defense through the DLA Land and Maritime office in Columbus, Ohio. All inquiries should be directed via email to the primary point of contact listed in the solicitation document, accessible through the SAM.gov link provided.
DLA Land And Maritime

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 114119
New
Federal
20--CONTROLLER,WINDOW W
Solicitation # SPE7M426T318V
The contract is for the procurement of 37 units of NSN 2090011584479 CONTROLLER, WINDOW W, with delivery required to DLA Distribution San Diego within 99 days after award. The solicitation, numbered SPE7M428T318V, is a Small Business Set Aside under NAICS code 114119 and is open only to qualified small businesses. Quotes must be submitted electronically through the SAM.gov portal, with no hard copies available. The approved source for this item is 21204 KS-9283, and no specifications, plans, or drawings are provided. All responsible small business concerns may submit a quote if received before the deadline of August 17, 2026. The solicitation was posted on August 6, 2026, and inquiries should be directed via email to DibbsBSM@dla.mil, with additional details accessible through the SAM.gov link provided. The contracting office is located in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime organization.
DLA Land And Maritime

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 114119
New
Federal
20--WINDOW,MARINE
Solicitation # SPE7M426T324Z
The U.S. Department of Defense, through DLA Land and Maritime, is seeking a single marine window, NSN 2040200093234, with a quantity of 11 units to be delivered to W1A8 DLA Distribution within 127 days after award. The procurement is conducted via a Request for Quote with a response deadline of August 17, 2026, and is open to all responsible sources provided quotes are submitted electronically by the stated deadline. Hard copies of the solicitation are not available, and no specifications, plans, or drawings are provided; all information must be obtained through the official solicitation link. The only approved source for this item is 35076 862147, and the solicitation falls under NAICS code 114119 with no set aside designation. The contracting office is located in Columbus, Ohio, and all inquiries must be directed via email to the designated point of contact listed in the solicitation.
DLA Land And Maritime

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 114119
New
DIBBS
POWER SUPPLY
Solicitation # SPE7M9-26-Q-0037
The contract solicitation SPE7M9-26-Q-0037 is for the procurement of power supplies identified by NSN 6120-01-730-5526 and part number L25296-002, with a CAGE code of 7E6V7, under a Total Small Business Set-Aside as defined by FAR 19.5. The requirement is for nine total units—one unit for delivery to the 1st Intelligence Battalion and eight units for the 1st Maintenance Battalion, both located at Camp Pendleton, California. All deliveries are subject to a firm fixed price with zero variance allowed in quantity, and the delivery schedule is set for 181 days after award. Inspection and acceptance occur at the destination, with FOB origin terms applying, meaning the contractor bears all risk and cost of transportation to the specified locations. Packaging must conform strictly to MIL-STD-2073-1E and RP001, including specific materials and configurations for preservation, cushioning, wrapping, and unit containment, with palletization following DLA packaging standards. Marking must comply fully with MIL-STD-129, including standardized barcoding and the absence of any special markings. No government identification may remain on non-accepted items, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the official DLA web portal. Invoicing is exclusively through WAWF, and payments are processed electronically via DoDAACs without a physical remittance address. The solicitation does not include pricing details, leaving unit and extended prices blank, indicating that the award will be based on competitive pricing submissions. Evaluation considers past performance, delivery capability, and price to determine best value, not simply the lowest technically acceptable bid. Offerors must be certified small businesses and comply with all relevant FAR and DFARS clauses regarding employment reporting, sustainable products, cybersecurity, telecommunications equipment restrictions, and supply chain security. Compliance with Clause 52.222-37, 52.223-23, and DFARS 252.204-7016 through 7018 is mandatory, though no offeror representations or certifications are completed within the solicitation document itself. Proposals must be submitted electronically via WAWF by August 14, 2026, with prior registration in SAM.gov required. The
ELECTRICAL DEVICES DIV

POSTED

6 days ago

DEADLINE

in 3 days
View Details
NAICS: 114119
DIBBS
WINDOW, MARINE
Solicitation # SPE7M0-26-T-029K
This contract solicits one marine window with NSN 2040-01-697-2402 and part number KS-30014-9, supplied by CORNELL-CARR CO., INC., under solicitation SPE7M0-26-T-029K, which is a total small business set-aside. The item must be delivered within five days of contract award, FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications, including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA packaging standards outlined in RP001. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. The delivery address is the U.S. Naval Base Sasebo, Japan, with shipping and transportation governed by DLA procedural notes C19 and C20. The contract enforces strict labeling and unit packaging rules, with the unit of issue as a single unit and the required delivery date set for August 5, 2026, although no need ship date is specified. Contract administration is managed by the Department of Defense’s Maritime Supply Chain ESOC, with primary point of contact Audrey Acuna.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

7 days ago

DEADLINE

in 6 days
View Details
NAICS: 114119
DIBBS
PLATE, MOUNTING
Solicitation # SPE7M4-26-T-298D
This contract specifies the procurement of a mounting plate identified by NSN 2040-01-716-3560 and part number 8931716 Rev PC No 10, with a quantity of five units to be delivered FOB origin within 214 days, targeting a need ship date of March 17, 2027. The item is classified as a restricted source requiring government engineering source approval, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Compliance with MIL-STD-129 for marking and labeling is mandatory, and packaging must adhere to DLA Packaging Requirements and palletization standards. The use of ozone-depleting substances is strictly prohibited unless written approval from the contracting officer is obtained, and mercury or mercury-containing compounds cannot be intentionally introduced into the product except for specific functional applications like batteries or sensors, which must meet additional containment requirements per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and the item is subject to an exact quantity tolerance of plus or minus zero percent. Delivery is to be made to the designated DLA receiving warehouse in Tracy, California, with inspection and acceptance occurring at the destination. The contract references DLA transportation procedures and specifies the primary point of contact for procurement inquiries.
FLUID HANDLING DIVISION

POSTED

8 days ago

DEADLINE

in 3 days
View Details
NAICS: 114119
SLED
Marine Specimen Collection – Trap-Based Invertebrate & Fish SamplingThe contract entails the deployment and continuous monitoring of fish traps in nearshore waters of Monterey Bay to collect marine fishes and invertebrates for research supply. The work is conducted under a subcontract to support scientific studies, with operations focused on sustainable and methodical specimen collection to ensure ecological integrity and data reliability. Activities include placing traps in designated marine zones, regular retrieval and inspection, species identification, and documentation of catch data to meet research standards. All efforts must comply with regional marine conservation protocols and operational timelines established for the monitoring period. The project is classified under NAICS code 114119, indicating it falls within the broader scope of fishing and related activities, and is administered by Fish and Wildlife, Region 7 - Marine, Monterey, under the state of California. While specific performance locations and contact details are not provided, the initiative is tied to ongoing marine biological research and requires adherence to environmental regulations and scientific protocols. The contract was posted on August 3, 2026, and execution is expected to align with the research objectives of the overseeing agency, emphasizing the importance of accurate, reproducible specimen collection for academic and conservation purposes.
Fish and Wildlife, Region 7 - Marine, Monterey

POSTED

9 days ago

DEADLINE

N/A
View Details
NAICS: 114119
SLED
Marine Biological Supply House for Research and Educational InstitutionsThe Department of Fish and Wildlife has authorized the Monterey Abalone Company to conduct year-round sampling of nearshore marine species, including coho salmon and Chinook salmon, under a permit issued for educational and research purposes. This authorization permits the use of specific fishing methods such as hook and line with surface, baited dropper loop, baited shrimp fly, and fish traps through December 31, 2027, to collect marine fishes, invertebrates, and algae. The collected specimens support a network of public aquariums, research centers, and universities across the United States by supplying live and preserved biological materials for educational exhibits and scientific study. The permit is granted under Fish and Game Code Section 2081(a), which allows limited take of protected species when conducted for approved educational or scientific purposes. The project is managed by California Fish and Wildlife Region 7 in Monterey, with Dylan Inskeep serving as the primary environmental scientist overseeing compliance and Emma Saso listed as the project applicant.
Fish and Wildlife, Region 7 - Marine, Monterey

POSTED

9 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
FEELER, PINION AND S
Solicitation # SPE7M4-26-T-330M
This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of two feeler pinion and s units, identified by NSN 2010-01-101-5803. The requirement specifies parts from Kingsbury Inc, specifically part numbers 465694-REF-D1 and 465748. This is a total small business set-aside under NAICS code 336415, with delivery required within 164 days to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to technical and quality requirements, including MIL-STD-129 for labeling and marking and MIL-STD-2073-1E for packaging. Environmental restrictions prohibit the intentional addition of mercury or the use of Class I ozone-depleting substances in the manufacturing and testing processes unless written approval is granted. All items must be marked with the contractor and manufacturer cage codes, part numbers, and available lot or serial numbers.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-331U
This solicitation, numbered SPE7M4-26-T-331U, is issued by the Department of Defense Fluid Handling Division for the procurement of 70 air duct hoses under NSN 4720-00-629-3075. The contract requires delivery within 189 days after the order is placed and specifies that inspection will occur at the destination. Compliance with various DLA technical and quality requirements is mandatory, including specific packaging standards, physical item marking, and the prohibition of Class I ozone-depleting chemicals. The procurement involves significant security and regulatory constraints, including CMMC Level 2 certification and strict adherence to ITAR and EAR export controls. Access to technical data is restricted to contractors with an approved US/Canada Joint Certification Program certification. Additionally, because the item contains proprietary technical data, the original manufacturer must be given the first opportunity to bid and must provide a no-quote response letter before the government can release the technical data package to other bidders.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336415
New
DIBBS
STAVE SET, BEARING, S
Solicitation # SPE7M4-26-T-330C
This contract is for the procurement of six stave set bearings, identified by NSN 2010014974693 and Electric Boat Corporation part number H625-0315B-24. The items are designated as critical application items and are restricted source products requiring engineering source approval by the government design control activity. A mandatory material requirement specifies that UHMWPE is the only acceptable material, overriding previous drawing specifications. The contract also prohibits the intentional addition of mercury or class I ozone depleting chemicals. Delivery is required within 164 days, with a need ship date of February 2, 2027, and a final delivery date of April 19, 2027. Shipping is FOB Origin with inspection and acceptance occurring at the destination. Strict packaging and preservation standards are mandated, including the use of opaque or kraft wrapping to protect items from sunlight, the prohibition of staples or metal strapping on bare items, and the requirement for overpacking in wooden boxes to prevent deformation during transit. All marking must comply with MIL-STD-129.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
PARTS KIT, PRESSURE
Solicitation # SPE7M4-26-T-331G
This solicitation is for the procurement of 164 pressure parts kits under solicitation number SPE7M4-26-T-331G, with a delivery requirement of 103 days after receipt of order. Offerors must provide details of current dealer or distributor certifications and are encouraged to submit quantity ranges to accommodate potential demand volatility. The contract prohibits the use of covered telecommunications equipment and restricts additive manufacturing unless specifically authorized. Compliance with domestic material restrictions, including the Berry Amendment and Buy American Act, is mandatory, with specific disclosure required for non-domestic materials. Additionally, all contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Small business joint ventures must provide specific representations and certifications as outlined in the FAR and DoD Class Deviations.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7M4-26-T-296E
The contract outlines the procurement of 44 units of preformed packing backup rings identified by NSN 5330-01-028-0646, with a delivery requirement of 106 days after award. The solicitation number is SPE7M4-26-T-296E, issued by the Defense Logistics Agency’s Fluid Handling Division under the Department of Defense, with a response deadline of August 10, 2026. Strict material compliance is mandated: no asbestos as defined in Fed-Std-313 is permitted, and mercury or mercury-containing compounds must not be intentionally added to or come into direct contact with the hardware, except for specific exempted applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and naval chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and primary point of contact is Blake Tushar at the provided email and phone number.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
CUP, PAINT, SPRAY GUN
Solicitation # SPE7M4-26-T-296K
This contract specifies the procurement of a paint cup and spray gun under NSN 4940-01-717-6088, with a quantity of 29 units to be delivered FOB origin within 157 days of contract award, no later than January 15, 2027. All items must comply with strict environmental and safety standards, including a complete prohibition on class I ozone-depleting chemicals and the intentional use of mercury or mercury-containing compounds, except for specific exempted applications such as functional mercury in batteries, fluorescent lights, and certain instrument controls as defined by NAVSEA. Mercury-containing portable lamps and instruments must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes required. The unit of issue is each, priced at $29.00 per unit, resulting in a total contract value of $841.00. Deliveries are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, and must adhere to DLA transport and freight procedures. Technical and quality requirements referenced through R or I numbers are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE7M4-26-T-296K, with no set-aside designation, and falls under NAICS code 334419.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333998
New
DIBBS
STRAINER, SEDIMENT
Solicitation # SPE7M3-26-T-8174
This contract is for the procurement of three sediment strainer screen assemblies used for debris detection in combiner and engine transmissions. The items are identified by NSN 4730-01-112-3061 and correspond to Boeing part number 145DS516-2 and Eaton Aerospace part number A8759. This is designated as a critical application item, requiring strict adherence to calibration standards and tailored higher level quality requirements. The agreement mandates that no Class I ozone depleting chemicals be used in the production or delivery of the items. Delivery is set for the DLA Distribution New Cumberland facility in Pennsylvania, with inspection and acceptance occurring at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA procurement requirements. The original required delivery date is July 29, 2027, with a final need ship date of February 4, 2028.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-330K
This contract is a solicitation for the procurement of two metal tube assemblies, identified by NSN 4710-12-332-0798, for the Department of Defense Fluid Handling Division. The requirement is a total small business set-aside with a delivery timeline of 150 days after order. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions prohibit the intentional addition of mercury or the use of Class I ozone-depleting chemicals. Technical and quality requirements are governed by the DLA Master List, and the items are designated as critical application components. Specific part numbers associated with J.P. Sauer Sohn Maschinenbau GmbH and Sauer Compressors USA are referenced for the assembly.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
SCREEN, HYDROPHOBIC
Solicitation # SPE7M3-26-T-8170
This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of 24 hydrophobic screens, identified by NSN 4730-01-587-1638 and Facet Oklahoma LLC part number 680522. The agreement specifies a delivery timeline of 130 days, with a required delivery date of January 11, 2027, and shipping destined for the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A critical environmental requirement prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components as defined by NAVSEA. Inspection and acceptance will occur at the destination, and the shipment is designated as FOB Origin.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-330X
This contract is for the procurement of four nonmetallic pump pressure hose assemblies designed for use on Boeing CH-47 helicopters. The items are identified by NSN 4720-01-127-0466 and are associated with part numbers from Smiths Tubular Systems-Laconia and Eaton Aeroquip LLC. Delivery is required within 20 days, with the origin serving as the point for both inspection and acceptance. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Environmental restrictions prohibit the intentional addition of mercury or the use of Class I ozone-depleting chemicals in the supplied hardware. Shipping must be handled via the fastest traceable means to the 3BN 160th Tech Supply at Hunter Army Airfield in Georgia.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-292K
This contract is for the procurement of a metal hose assembly, identified by part number 57201-111 and NSN 4720-01-501-1738, with a quantity of 68 units, each priced at $68.00, for a total contract value of $4,624. Delivery is required within 28 days of award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. The item is subject to stringent technical and quality controls, including mandatory compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other specifications. The assembly must be manufactured and tested using limited rights data that only approved vendors with traceability to the original source may access, and a Source Approval Request (SAR) package is required for new suppliers. The product must adhere to zero non-conformance sampling standards under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned specific verification levels and AQLs. Packaging and labeling must follow MIL-STD-129 and ASTM D3951, with palletization governed by DLA packaging requirements, and no ozone-depleting chemicals are permitted under any circumstances. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and the item is classified as a critical application with covered defense information subject to strict handling rules. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 326220, with a response deadline of August 10, 2026, and an original delivery requirement of October 22, 2026, though an earlier ship date of September 8, 2026, is requested.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details