Boat Trailers

The US Army Special Operations Command (USASOC), as part of the U.S. Army Special Forces Underwater Operations (SFUWO) Program has a requirement for six (6) boat trailers. The Government reserves the right to award separately if it is in its best interest. Vendors must be able to provide the majority of all items under this Request For Quote (RFQ). This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This combined synopsis/solicitation incorporates provisions and clauses in accordance with Federal Acquisition Circular (FAC) FAC 2005-76, 25 July 2014. North American Industrial Classification Code (NAICS) 336212 (500 employees) applies to this procurement. This procurement will be 100% small business set-aside. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. To ensure that sufficient information is available for technical evaluation, the offeror shall furnish descriptive material (technical information, brochures, drawings, or other information) necessary for the purchasing activity to determine whether the product offered meets the salient characteristics of the requirement. Offerors not providing technical information shall be excluded from competition. REQUIREMENT and ITEM SPECIFICATIONS: The U.S. Army Special Operations Command (USASOC) and the SFUWO Program require the following items: CLIN 0001: Boat Trailer, Quantity six (6) each. In accordance with the below specifications. - 27'-29' in length - 102" wide - 13,000 lbs carrying capacity - Aluminum I beams - Deep V cross members - Stainless steel bearing protectors - Diamond plate aluminum fenders/walk on with step pads - Carpeted cypress bunks - Tongue jack - Submersible LED lights/w cover - Heavy duty 2 speed winch with strap and bow eye safety chain - PVC covered guide pole - All wiring protected with heat shrink and fully grounded to light - Non marking bow stop rollers - Adjustable bunks and winch stand 1. The Government requires (6) six boat trailers to pull the vehicle below: - McKee Craft - 28 foot with deep hull and 30 inch shaft. 2. The following vehicle will be used to the trailer: - Dodge Ram Hemi 5.7 liter, Ram 2500 heavy duty 3. The unit currently uses the Magic Tilt trailer (model number: TTALS28130). This trailer is included only as a reference for a trailer that does meet requirements. Brand Name or equal is NOT required. 4. The trailer shall not have disc brakes; however, the brakes may be included as an option. Trailer will not be used for long distance road trips. DELIVERY: Desired delivery date is 30 Days ARO to Key West, Florida, 33040. FOB Destination. US Army SFUWO School BLDG KW-100, Fleming Key NAS KW, Trumbo Pt Annex Key West, FL 33040 CLAUSE/PROVISIONS REFERENCES: The following Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulation Supplement (DFARS) and USOCOM Supplement provisions and clauses are hereby incorporated by reference to this procurement action (exception(s) are provided, where applicable): FAR 52.204-7 System For Award Management (JULY 2013) FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards FAR 52.204-13, System for Award Management (SAM) Maintenance FAR 52.212-4, Contract Terms and Conditions, Commercial Items. FAR 52.212-1, Instructions to Offerors -Commercial Items applies. Additional Instructions. Vendors are encouraged to contact the Government for clarification if there are, or appear to be, errors, omissions, or inaccuracies in the request for quote. Questions should be submitted in writing to the point of contact identified below: Government POC: Megan Brady HQ, USASOC 910-432-1503 E2929 Desert Storm Drive 910-432-9345 (F) Fort Bragg, NC 28310 megan.brady@soc.mil Please ensure the following information is included with your quote: *Cage Code/DUNS Number *Contact Information *Payment/Discount Terms *Delivery times and charges *FOB Point *Any other remarks as necessary Quotes shall be submitted to HQ, USASOC ATTN: AOCO: Ms. Megan Brady, Building E-2929, Desert Storm Drive, Fort Bragg, North Carolina, 28310, not later than 11:59 PM EST, Tuesday, 09 September 2014. Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Government to respond. Questions must be submitted via email to the contracting officer at megan.brady@soc.mi NLT 4:00 PM EST, Thursday, 04 September 2014. Telephonic questions will not be returned. Questions received after the question period has ended will not be considered. E-mail submissions are preferred however; fax submissions will be accepted at (910) 432-9345. Offerors are cautioned that due to file size limitations and email security protocols, there is a risk that not all correspondence will be received by this office. It is the offerors responsibility to ensure receipt of all email and faxed correspondence. All answers will be provided via an amendment to the solicitation. Any amendments that may be issued will be published on FedBizOpps, the same as this solicitation. Quotes shall include: (1) letter signed by an individual authorized to bind the organization, with a schedule of offered items, to include item specifications, unit and total price, (2) delivery time and F.O.B point, (3) completed Official Representations and Certifications (if not completed in SAM), and (4) acknowledgement of any amendments that may be issued. Not submitting sufficient information for evaluation may be grounds for the offer to be eliminated from competition. It is the responsibility of offerors to review the FBO website for any changes or amendments to this RFQ. Offerors must be actively registered in the System for Award Management (SAM) as a small business concern prior to award. DUNS/CCR website is: https://www.sam.gov. New equipment ONLY. NO remanufactured or used products. Quote MUST be good for 30 calendar days after submission. Point of contact for information is Ms. Megan Brady, Contracting Officer, megan.brady@soc.mil or (910) 432-1503. Email is preferred method of contact. FAR 52.212-2, Evaluation -- Commercial Items (Jan 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation and is the lowers price technically acceptable. The following evaluation factors in the descending order of importance will be used to evaluate offers: (1) Technical Acceptability (2) Price and (3) Delivery. It is the Government's intention to award to the lowest priced technically acceptable offeror capable of providing all CLINs, but reserves the right to award separately if in the best interest of the Government. 1. Technical acceptability is defined as the contractor's ability to: i. Meet or exceed the specification.* ii. Provide all requested items. [Government reserves the option to award to a single offeror capable of delivering all CLINs, even if at a slightly higher price for one/some CLIN(s)]. iii. Show acceptable past performance (i.e. capacity to perform the work, no active exclusions in SAM and no derogatory information in FAPIIS). *To ensure that sufficient information is available for technical evaluation, the offeror shall furnish descriptive material (technical information, brochures, or other information) necessary for the purchasing activity to determine whether the offered product meets the salient characteristics of the requirement. Offerors not providing technical information may be excluded from competition. 2. Price. Requirement will be quoted as a Firm Fixed Price offer. Offers shall remain valid for a minimum of 30 days. 3. Delivery. Requested Delivery Date is 30 Days ARO. Offeror must specify Shipping Terms, FOB Point, and cost expressed as Firm Fixed price or Not To Exceed Price with charges supported by actual shipping invoice. FAR 52.212-3, Offeror Representations and Certifications-Commercial Items and Defense Federal Acquisition Supplement (DFARS) 252.212.7000, Offeror Representations and Certifications-Commercial Items are applicable to this requirement and offerors shall include a completed copy of the Representations and Certifications with their bid. FAR 52.212-5 (Deviation), Contract Terms and Conditions Required to Implement Statutes of Executive Orders - Commercial items (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times, the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b)(1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b) (i) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note). (ii) 52.219-8, Utilization of Small Business Concerns (DEC 2010) (15 U.S.C. 637(d) (2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) Reserved. (iv) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (SEP 2006) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (JUN 1998) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)). ___ Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (FEB 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (JUL 2012). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) FAR 52.219-28, Post-Award Small Business Representation FAR 52.222-3, Convict Labor. FAR 52.222-19, Child Labor - Cooperation with Authorities and Remedies. FAR 52.222-21, Prohibition of Segregated Facilities. FAR 52.222-22, Previous Contracts and Compliance Reports. FAR 52.222-25, Affirmative Action Compliance. FAR 52.222-36, Affirmative Action For Workers with Disabilities FAR 52.222-37, Employment Reports On Special Disabled Veterans, Veterans Of The Vietnam Era, and Other Eligible Veterans. FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving FAR 52.225-1, FAR 52.225-4, Buy American Act--Free Trade Agreement--Israeli Trade Act Certificate. FAR 52.225-13, Restrictions on Certain Foreign Purchases. FAR 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration. FAR 52.246-2 Alt I, Inspection of Supplies-Fixed Price. FAR 52.247-29, F.O.B. Origin or FAR 52.247-34, F.O.B. Destination, as applicable to award(s). FAR 52.252-1, Solicitation Provisions Incorporated by Reference This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es): http://farsite.hill.af.mil. (End of provision) FAR 52.252-2, Clauses Incorporated by Reference This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es): http://farsite.hill.af.mil (End of clause) FAR 52.252-5, Authorized Deviations in Provisions (a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of"(DEVIATION)" after the date of the provision. (b) The use in this solicitation of any Defense Federal Acquisition Regulation (48 CFR Chapter 2) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of provision) FAR 52.252-6, Authorized Deviations in Clauses (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any Defense Acquisition Regulation (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) DFARS 252.211-7003, Item Unique Identification and Valuation. As prescribed in 211.274-6(a)(1), use the following clause: ITEM UNIQUE IDENTIFICATION AND VALUATION (DEC 2013) (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. "Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. "DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise (i.e., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, Allied Committee 135 NATO Commercial and Government Entity (NCAGE)/ Commercial and Government Entity (CAGE) Code, or the Coded Representation of the North American Telecommunications Industry Manufacturers, Suppliers, and Related Service Companies (ATIS-0322000) Number), European Health Industry Business Communication Council (EHIBCC) and Health Industry Business Communication Council (HIBCC)), as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.nen.nl/Normontwikkeling/Certificatieschemas-en-keurmerken/Schemabeheer/ISOIEC-15459.htm under "Register." "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (If items are identified in the Schedule, insert "See Schedule" in this table.) (iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____. (iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____. (v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability. (2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. (3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification. (4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that- (i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media. (5) Unique item identifier. (i) The Contractor shall- (A) Determine whether to- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version; (C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and (D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version. (ii) The issuing agency code- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (12) Type designation of the item as specified in the contract schedule, if any. (13) Whether the item is an item of Special Tooling or Special Test Equipment. (14) Whether the item is covered by a warranty. (e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: (1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/. (2) Embedded items shall be reported by one of the following methods- (i) Use of the embedded items capability in WAWF; (ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or (iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items. (End of clause) The Contractor shall provide a unique item identifier in accordance with DFAR 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2011) on all items greater than $5,000.00. a. Review IUID Equivalents at www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html b. All...