Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOOT, DUST AND MOISTURE

Active
SPE7LX-26-U-9060Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 409 units of a BOOT, DUST AND MOISTURE SEAL with NSN/Part Number 5340-01-108-3680, under solicitation SPE7LX-26-U-9060, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 155 days after contract award, and the solicitation is a Total Small Business Set-Aside as defined by FAR 19.5, with responses due by August 12, 2026. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting access and disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or their subsidiaries. Only DLA contractors with approved US/Canada Joint Certification Program status, who have completed required training and questionnaire submissions, are authorized to access this controlled data, with DFARS 252.225-7048 governing compliance. The point of contact for inquiries is Theodore Misiolek, reachable via phone or email provided.

General Info

Procure 409 BOOT, DUST AND MOISTURE SEAL units, delivery in 155 days, small business set-aside, ITAR/EAR controlled data.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

336211 - Motor Vehicle Body ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE7LX-26-U-9060.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOOT,DUST AND MOISTURE SEAL
BOOT,DUST AND MOISTURE SEAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-01-108-3680 Quantity: 409 EA Purchase Request: 1000236991QTY: 409 Delivery: 155 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336211
New
DIBBS
GUARD, MECHANICAL DRIVEThe contract is for one unit of a mechanical drive guard, part number 3P3065, manufactured by Caterpillar Inc., identified by NSN 3020-01-253-4673, to be delivered within 20 days to Fort Stewart, Georgia, with delivery terms FOB origin. All packaging must comply with ASTM D3951 and MIL-STD-129 as specified in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. The unit of issue is each, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be palletized according to DLA packaging requirements. Shipping must be conducted via the fastest traceable means, excluding parcel post, and labeled with the designated mark for W33RBS at Fort Stewart, under shipment RDD 777. The contract references solicitation SPE7L1-26-T-882T, with a required delivery date of July 24, 2026, and specifies government use codes and procurement control numbers. The primary point of contact is Kristina Derry of the Department of Defense, Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336211
New
Federal
Type 6 Fire Engines-Model 683U- Body Only
USDA Forest Service

POSTED

about 20 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336211
New
DIBBS
SHELL, CARGO, ASSYThe contract involves the procurement of four units of a Shell, Cargo, Assembly identified by NSN 2510-01-473-4043, with a delivery requirement 261 days after award. All components must comply with qualified products or manufacturers lists (QPL/QML) as specified, and only approved sources may be used. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the governing specification. Final inspection and acceptance must occur at the contractor’s manufacturing facility, requiring technical inspection with full access to drawings and technical data; count, kind, and condition inspections are not acceptable. First Article Testing is mandatory for three units, with the contractor providing 30 days’ notice prior to testing and the government having 60 days to review the results. The testing process will consume no units destructively, and three non-destructed units will be retained as manufacturing standards and included in the final delivery, though the approved first article itself cannot be shipped as a new part. Cybersecurity compliance requires CMMC Level 2 certification by a certified third-party assessment organization. Technical data associated with this item is subject to ITAR or EAR export controls, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. Distribution of such data to foreign persons, whether domestic or abroad, is prohibited without proper clearance. The contract was solicited under SPE7L3-26-T-135F with a response deadline of August 7, 2026, and performance is designated for New Cumberland, PA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336211
New
SLED
ADA-Compliant Vehicle Procurement and DeliveryThe contract requires the procurement and delivery of a new, fully ADA-compliant mini van that meets all federal, state, and municipal accessibility standards, including integrated wheelchair lifts, certified securement systems, and comprehensive safety features to ensure safe and independent access for individuals with mobility impairments. The vehicle must be newly manufactured, not refurbished or used, and must adhere strictly to all applicable regulations governing accessibility in public transportation and service vehicles. The solicitation is classified as a subcontract under NAICS code 336211, with a response deadline of August 12, 2026, at 5:00 PM, and was posted on July 27, 2026. The place of performance is set in Boston, Massachusetts, with a zip code of 02201, and the contract is managed by the Massachusetts agency referred to as 143 - Procurement. All vendors must ensure full compliance with accessibility requirements and deliver the vehicle in accordance with the specified technical and safety benchmarks, with no allowances for non-compliant modifications or substitutions.
143 - Procurement

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336211
New
Federal
Towable Trailer and DOT Compliance PackageThe contract requires the design and supply of towable chassis systems fully compliant with DOT regulations for the safe transport and deployment of security booths. Each unit must include a hitch for towing, electrical connectors for lighting and power, a spare tire, and a unique VIN assigned to meet federal identification standards. The chassis must be engineered to ensure secure, stable, and lawful transportation under all road conditions, with all components integrated to support the operational needs of mobile security units. This subcontract is issued by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16, with performance expected in Pineville. The solicitation was posted on July 27, 2026, and responses are due by August 3, 2026. The NAICS code 336211 indicates the work falls under motor vehicle body manufacturing, and while no set-aside classification is specified, bidders must demonstrate full adherence to DOT safety and compliance requirements without exception. All systems must be ready for immediate deployment upon delivery.
256-NETWORK Contract Office 16 (36C256)

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 336211
New
Federal
25 -- ARMOR, TRANSPARENT, VDLA Weapons Support in Columbus, Ohio is conducting market research for a one-time purchase of 63 units of ARMOR, TRANSPARENT, V, identified by NSN 2541-01-651-8075, under NAICS code 336211, with a total small business set-aside. The procurement will adhere to a comprehensive set of technical documentation including multiple drawing revisions, quality assurance procedures, and military and non-government standards, with key references such as TDP Rev C Gen 3, specific drawing numbers dated between 2005 and 2026, and specification standards including MS27142E, MS51412C, MS51844E, and NASM35308. All technical requirements are tied to exact part numbers and revision dates, with several drawings set to be effective in 2025 and 2026, indicating updated or forthcoming design control. The solicitation is not yet issued but will be posted separately; in the interim, interested small businesses must complete and submit a market survey to Zachary Rodriguez by August 3, 2026, to indicate interest and capability for this contract opportunity.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 336211
New
DIBBS
BOX CONNECTOR, ELECTThe contract is for the procurement of 120 packages of BOX CONNECTOR, ELECT, with each package containing two units, as defined by the unit of issue 1 PG = 2 EA effective March 1, 2016, and identified by the NSN 5975012954166. Delivery is required within 162 days from the award date, with an original required delivery date of April 5, 2027, and a need ship date of January 3, 2027. The supplies are to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. All packaging must comply with MIL-STD-2073-1E, including preservation method 10, cleaning/drying method 1, and the use of wrap material JA with no cushioning. Marking must adhere to MIL-STD-129, with no special marking required, and palletization must follow DLA Packaging Requirements for Procurement (RP001). The contract strictly prohibits intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, and specified NAVSEA reagents; portable mercury-containing devices must be shock-proof and include a secondary containment per NAVSEA 5100-003D. Hazardous material handling is governed by DFARS 252.223-7001, requiring compliance with OSHA’s Hazard Communication Standard and submission of Safety Data Sheets, with radioactive materials subject to specific labeling under MIL-STD-129. Invoicing and payment must be processed through WAWF, and contractors are required to submit invoices using approved document types such as Invoice and Receiving Report or Invoice 2in1. The contract includes federal acquisition regulation clauses related to equal opportunity, combating human trafficking, employment eligibility verification, hazardous materials identification, sustainable products, cybersecurity safeguarding (including NIST SP 800-171), subcontractor management, and prohibitions on covered defense telecommunications equipment. Contractors must provide unique entity identifiers and CAGE codes and certify their small business status if applicable. The solicitation was issued on July 24, 2026, with responses due by July 29, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF
ASC SUPPLIER OPER AE AND AF DIV

POSTED

5 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 336211
New
DIBBS
SCREEN, COOLERThe contract is for the procurement of 101 units of SCREEN, COOLER with NSN 2510-01-435-7979 under solicitation SPE7L4-26-T-5817, issued as a total small business set-aside under NAICS code 336211. Delivery is required within 168 days to the DLA Distribution facility at New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The items must be packaged in full compliance with MIL-STD-2073-1E, including specific preservation methods, cushioning materials, and unit container codes, and marked according to MIL-STD-129 with no special marking required. Packaging must adhere to DLA’s reduced plastic initiative without compromising product protection. Inspection and acceptance occur at the destination, and the product must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The supplier must deliver by the original required date of April 18, 2027, with a needed ship date of January 19, 2027. The contract is managed by the Department of Defense’s Combat Vehicles and Armament office, with primary point of contact Anna-Rachelle Betts, and all transportation details are governed by DLA procedural notes C19 and C20.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 336211
New
DIBBS
STUD, CAB LIFTThe item specified is a STUD, CAB LIFT with NSN 2510-01-223-0039, for a quantity of 30 units, under purchase request 7017604036, with a delivery requirement of 168 days after date of award. Technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure—whether to foreign nationals within the United States or abroad—requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and authorized approval from DLA may access the technical information. The solicitation number is SPE7L3-26-T-127N, issued by the Department of Defense under the Land Supplier Operations Vehicle Support agency, with a response deadline of August 3, 2026, and a place of performance in Texarkana, Texas, 75507-5000. Primary point of contact is Matthew Curry, reachable via email and phone provided in the contract data.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 336211
New
DIBBS
PARTS KIT, HOOD, ENGINEThe contract pertains to the procurement of two parts kits: a Hood, Engine Compartment Kit and a Seal Replacement Kit, designated as critical application items under NSN 2510-01-454-2754, with a total estimated quantity of three kits (KT) to be delivered FOB Origin within 89 days. All kits must be individually packaged as complete units in compliance with MIL-STD-2073-1 Appendix D, using Method of Preservation 31 to safeguard the most sensitive component, with all loose hardware secured in sealed containers and no bulk shipping permitted. Packaging and labeling must adhere to RP001: DLA Packaging Requirements for Procurement and MIL-STD-129, including the mandatory marking of “1 KT” on each unit container and inclusion of a parts list detailing component names, numbers, and quantities within every kit. Special marking code ZZ applies to segregation and identification requirements as defined in MIL-STD-2073-1, Appendix D, and no asbestos or hexavalent chromium is permitted under FED-STD-313 and DFARS 252.223-7008. The contract is an Indefinite Delivery Contract (IDC) with a maximum value of $350,000 and no unit price specified, meaning actual purchases are contingent on future delivery orders. Inspection and acceptance occur at the destination, with all supplies required to meet the DLA Master List of Technical and Quality Requirements in effect on the award date. The contractor must comply with stringent cybersecurity protocols including NIST SP 800-171, safeguarding covered defense information, and reporting cyber incidents within 72 hours under DFARS 252.204-7012. Prohibitions against using covered telecommunications equipment from Chinese military companies and mandatory electronic invoicing via WAWF are enforced. Payment is subject to DFARS clauses requiring accelerated payments to small business subcontractors and electronic submission of payment requests. The offeror must represent its size status, UEI, and CAGE code and affirm compliance with trafficking in persons, employment eligibility, sustainable products, and whistleblower protection requirements. Delivery is limited to the contiguous United States, and all materials must arrive fully assembled, properly preserved, labeled, and ready for immediate use without further sorting or repackaging by government personnel.
LAND SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 336211
New
DIBBS
FRAME, COOLER SCREENThe contract is for the procurement of 23 units of a FRAME, COOLER SCREEN with NSN 2510-01-434-6139 under solicitation SPE7L4-26-T-5764, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within 168 days from the contract date with a firm delivery deadline of January 19, 2027, and all items must be shipped FOB origin with zero tolerance for quantity variance. The item is designated as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards. Packaging and labeling must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. The unit of issue is each, priced at $23.00 per unit, totaling $529.00. All packaging must be marked with the correct unit of issue and quantity per unit pack as defined in the contract, and government identification must be removed from non-accepted supplies. Delivery is to be made to DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston, AL 36201-4199, with transportation governed by DLAD Proc Note C19 and C20. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, under NAICS code 336211.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 336211
New
DIBBS
FENDER, VEHICULARThe contract solicitation SPE7LX-26-U-8961 seeks the procurement of 27 vehicular fenders under an indefinite-delivery contract with a maximum value of $350,000 and a guaranteed minimum of four units. The item is identified by NSN 2510-01-311-6860 with delivery required within 103 days of award under FOB Origin terms, meaning the contractor assumes all transportation costs and risk of loss until delivery to the designated government location. All supplies must comply with stringent packaging and marking standards including MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling and barcoding, supplemented by DLA’s RP001 packaging requirements. The fenders must be preserved using clean and dry methods without preservation materials and packaged with CA CUSH/DUNN and JC CUSH/DUNN cushioning of thickness designation A. Inspection and acceptance occur at the destination by the government under FAR 52.246-2, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using a zero-conformance acceptance criterion unless otherwise specified. Attributes are classified as critical, major, or minor with corresponding verification levels and AQLs of 0.1, 1.0, and 4.0 respectively. Manufacturing quality systems must adhere to SAE AS9003 and ISO 9001, and the use of Class I ozone-depleting chemicals is strictly prohibited, with any substitutes requiring prior approval. Hazardous materials, if any, must be clearly labeled per 29 CFR 1910.1200 and supported by submitted Safety Data Sheets prior to award, with radioactive materials exceeding minimal thresholds requiring specific markings per MIL-STD-129. The contract includes cybersecurity compliance requirements aligning with NIST SP 800-171 and CMMC Level 2 certification for third-party assessors, while technical data is subject to ITAR or EAR export controls requiring JCP certification and mandatory training for DLA contractors. Offerors must hold a UEI and CAGE code and declare their small business status if applicable under socioeconomic programs such as WOSB, SDVOSB, or HUBZone. Invoicing must be conducted exclusively through WAWF using approved document types, and the contract permits accelerated payments to small business
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

6 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 336320
New
DIBBS
WINDSHIELD WIPER ASSEMThe contract pertains to the procurement of a windshield wiper assembly with NSN 2540-01-504-5424 and part number 8036274, supplied by JLG Industries, Inc., under solicitation SPE7LX-26-U-9054. The quantity ordered is 13 units, delivered FOB origin with a delivery period of 81 days, and no variance is permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override any ASTM D3951 standards. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must meet RP001 DLA Packaging Requirements. If the item is classified as hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, subject to DLA’s higher-priority standards. The unit of issue is each, with a quantity per unit pack of one, and government identification must be removed from non-accepted supplies. The contract is part of a direct, CONUS acquisition under DLA, and all technical specifications referenced are controlled by the version of the DLA Master List in effect on the solicitation issue date. The solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026, and involves a NAICS code of 336320 under the Department of Defense’s Strategic Acquisition Program Directorate.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMEDThis contract, identified by solicitation number SPE7LX-26-U-9049, seeks the procurement of 322 units of preformed packing with NSN 5330-01-172-2590, to be delivered within 80 days of award. The requirement incorporates all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and all items must be free of Class I ozone-depleting chemicals, with any substitutes requiring prior approval unless explicitly authorized by the specification. The contract enforces strict export control protocols under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons or entities, and restricts access to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled data, and obtained formal approval from the DLA controlling authority. Configuration changes require formal engineering change proposals and variance requests, and all government identification must be removed from non-accepted supplies before disposal. Cybersecurity compliance mandates CMMC Level 2 certification for third-party assessment organizations involved in performance, and covered defense information is subject to applicable DFARS clauses, including DFARS 252.225-7048. The performance location and delivery terms are governed by U.S. federal standards, and inquiries should be directed to the primary point of contact, Theodore Misiolek, at the provided DLA email and phone.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDEREDThe contract is for the procurement of a SHAFT, SHOULDERED with NSN 3040-00-200-1392 and part number 195533, supplied by AERO INTERNATIONAL, LLC, under solicitation SPE7LX-26-U-9041. It is a Total Small Business Set-Aside with a NAICS code of 333613 and includes a requirement for Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. The item is classified as a Critical Application Item and must comply with DLA packaging standards per RP001 and MIL-STD-2073-1E, with specific packaging codes and marking per MIL-STD-129. Delivery is to be FOB origin within 151 days, with inspection and acceptance occurring at the destination. The quantity is strictly fixed at 15 units with no variance allowed and is estimated, meaning the IDC may not purchase all units. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances unless otherwise specified, and attributes must be verified at assigned levels or AQLs. Item Unique Identification is not required per the Service customer's request. Measurement and test equipment must meet applicable standards, and all technical and quality requirements are governed by the DLA Master List. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
DIBBS
NOZZLE, STARTER FUELThe contract is for the procurement of 67 units of a starter fuel nozzle, identified by NSN 2910-00-919-2022 and part numbers 915914C1 from RTX Corporation and 970-2 from COLLINS ENGINE NOZZLES, INC, intended for use on CH-47 Chinook helicopters. This is a critical application item sourced under a total small business set-aside, with a unit price of $67.00 per unit, resulting in a total price of $4,489.00. Delivery is required within 167 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at destination. All packaging must comply with ASTM D3951 and MIL-STD-129, strictly adhering to DLA’s Master List of Technical and Quality Requirements, which override any other standards. Palletization must follow DLA’s RP001 packaging guidelines, and the item is subject to configuration change management and variance control procedures. The solicitation number is SPE7LX-26-U-8795, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with responses due by July 31, 2026, and the point of contact is Theodore Misiolek.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDEREDThe contract pertains to the procurement of a SHAFT, SHOULDERED with NSN 3040-01-208-9288 and part number 7-0064-01 manufactured by AIR & LIQUID SYSTEMS CORPORATION, under solicitation SPE7LX-26-U-9059. A total of 11 units are required at a unit price of $11.00, with delivery due within 129 days FOB origin and no variance allowed in quantity. The item is classified as a critical application component, and delivery must comply with MIL-STD-2073-1E packaging standards including Preservative Method 10, wrapping material JA, cushioning material AD, and unit container FO, with marking in accordance with MIL-STD-129 and no special marking codes. Packaging must adhere to DLA’s RP001 requirements. The contract prohibits the intentional use or direct contact of mercury or mercury-containing compounds except for specified functional uses such as batteries, fluorescent lamps, sensors, and weapon systems, with portable devices containing mercury required to have shockproof design and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly forbidden, and any substitute chemicals must be approved unless explicitly permitted by specification. Inspection and acceptance occur at the destination. The solicitation is issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and the item falls under NAICS code 333613. The estimated quantity is subject to non-purchase by the IDC.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333612
New
DIBBS
DISK, CLUTCH, NONVEHIThis contract pertains to the procurement of a nonvehicular clutch disk, identified by NSN 3010-00-812-8162 and part number 367237, with a quantity of 129 units to be delivered FOB origin within 104 days. The item is classified as a critical application item under DLA Direct, CONUS coverage, with no tolerance for quantity variance. All packaging and labeling must adhere to ASTM D3951 and MIL-STD-129 standards, with palletization strictly following DLA’s packaging requirements outlined in RP001, and all technical and quality specifications from the DLA Master List of Technical and Quality Requirements take precedence over any other standards. The contract includes mandatory compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and applies to covered defense information. Inspection and acceptance occur at the destination, and government identification must be removed from any non-accepted supplies. The unit of issue is each, priced at $129.00 per unit, with a total price of $16,641.00, and the quantity shown is an estimate potentially subject to adjustment by the IDC. The solicitation is issued under SPE7LX-26-U-9065, with a response deadline of August 12, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, BOWThe contract pertains to the procurement of a HANDLE, BOW with NSN 5340-01-521-6772 and quantity of 103 units, under solicitation SPE7LX-26-U-9061, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item is classified as a critical application item and must comply with MIL-STD-130N for identification marking. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels or AQLs as specified. Packaging must adhere to DLA’s RP001 requirements and MIL-STD-129 for labeling, with hazardous materials complying with FED-STD-313 and TQ requirement IP025, while non-hazardous items follow ASTM D3951 subject to DLA requirements. Delivery is FOB origin with a 155-day delivery window, no quantity variance permitted, and inspection and acceptance occur at destination. The contract mandates full and open competition and includes specific technical documentation referenced to revision levels and drawing numbers.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
RETAINER, PACKINGThe contract pertains to the procurement of 112 units of RETAINER, PACKING with NSN 5330-01-140-9926 under solicitation SPE7LX-26-U-9046, which is a total small business set-aside targeting small businesses as defined by FAR 19.5. Technical and quality standards governing this item are mandated by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The item must conform to a recognized military or consensus non-government part standard, and only hardware produced to the current revision of the standard after the solicitation date is acceptable, though previously manufactured items adhering to former valid revisions remain eligible. Asbestos, as defined in FED-STD-313, is strictly prohibited. Mercury or mercury-containing compounds are banned from intentional addition or direct contact with the hardware, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies. The delivery schedule requires fulfillment within 97 days of award, with the solicitation closing on August 12, 2026, and the point of contact being Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, MANUAL CONTROLThe contract pertains to the procurement of a manual control handle, identified by part number 10208-1003 and NSN 5340-01-413-3729, with a quantity of 93 units at a unit price of $93.00, resulting in a total price of $8,649. Delivery is required within 71 days under FOB origin terms, with no variance allowed in quantity. The item is classified as a critical application and must comply with all DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, including specific packaging codes and methods without special marking. Mercury and mercury-containing compounds are strictly prohibited unless functionally essential and explicitly authorized, such as in batteries, fluorescent lamps, or certain instruments, with additional requirements for shock-proof containment and secondary boundaries as specified by NAVSEA 5100-003D. Packaging and shipping must adhere to IP025 standards for hazardous materials where applicable. Inspection and acceptance occur at the destination, and the item is procured through a DLA Direct, CONUS contract. The solicitation is issued under SPE7LX-26-U-9048 with a response deadline of August 12, 2026, and falls under NAICS code 332510. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The point of contact for inquiries is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
RETAINER, NUT AND BOLTThe contract pertains to the procurement of 111 units of a retainer, nut, and bolt identified by part number SLR409-16AF and NSN 5340-01-387-5261, classified as a commercial item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on the acquisition size. Government identification must be removed from non-accepted supplies in accordance with RQ011. The solicitation, numbered SPE7LX-26-U-9045, was posted on July 28, 2026, with responses due by August 12, 2026, and is a total small business set-aside under NAICS code 332510. Delivery is required within 116 days after contract award, and the contracting office is the Strategic Acquisition Program Directorate within the Department of Defense. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
PANEL, BODY, VEHICULAThe contract pertains to the procurement of a PANEL, BODY, VEHICULA with NSN 2510-01-574-8401 and part number 500K3171-1, issued under solicitation SPE7LX-26-U-9055 by the Department of Defense’s Strategic Acquisition Program Directorate. The quantity is 78 units, each priced at $78.00, for a total of $6,084, with delivery required within 129 days FOB origin. The unit of issue is each (EA), and no quantity variance is permitted. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. All packaging and labeling must follow MIL-STD-129, and palletization must conform to RP001: DLA Packaging Requirements for Procurement. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies per RQ011. The contract is classified as DLA Direct, CONUS, and the solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026. Primary point of contact is Theodore Misiolek, reachable via phone or email provided.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333415
New
DIBBS
PUMP, COOLING SYSTEMThe contract pertains to the procurement of a remanufactured cooling system pump kit for engine applications, specifically identified by NSN 2930-01-496-1268 and part number DDE R23539929, supplied by Daimler Truck North America LLC. The item is to be delivered in 71 days under a DLA Direct, CONUS coverage arrangement with a total quantity of 72 kits, each comprising a water pump and seal. The delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence, mandating marking and labeling in accordance with MIL-STD-129 and palletization per RP001. The unit of issue is KT, and all packaging details must align with the specified QUP. This solicitation, issued under SPE7LX-26-U-9067, is a total small business set-aside under NAICS code 333415, with responses due by August 12, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details