Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BRACKET, VEHICULAR C

Active
SPE7L4-26-U-1048Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a Vehicular Bracket, Part Number 22-62169-201, identified by NSN 2590015763581, with a quantity of 14 units to be delivered within 85 days under the solicitation SPE7L4-26-U-1048. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but is superseded by DLA’s Master List of Technical and Quality Requirements, which takes precedence; all packaging and labeling must adhere to MIL-STD-129, and palletization must meet RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any alternative chemicals require prior approval unless explicitly authorized by specification. The unit of issue is each, with a unit price of $14.00, resulting in a total price of $196.00. The contract is issued by the Department of Defense, Office of the LSO Combat Vehicles and Armament, and is subject to the DLA Direct, CONUS coverage. Compliance with all technical and quality standards referenced in the DLA Master List, as defined by the solicitation or award date, is mandatory. The designated point of contact is Karryn Hoston, reachable via email and phone provided.

General Info

Procurement of 14 vehicular brackets at $14 each, FOB origin, DLA packaging and compliance required.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L4-26-U-1048 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
Karryn Hoston
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRACKET,VEHICULAR C
BRACKET,VEHICULAR C
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
DAIMLER TRUCK NORTH AMERICA LLC 64678 P/N 22-62169-201
HARRIS WELDING AND MACHINE COMPANY 7A8G4 P/N 22-62169-201
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000237555 0001 EA 14.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:2590015763581
DELIVERY (IN DAYS):0085
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7L4-26-U-1048
SECTION B
PR: 1000237555 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7L4-26-U-1048 NSN/Part Number: 2590-01-576-3581 Quantity: 14 EA Purchase Request: 1000237555QTY: 14 Delivery: 85 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
LATCH SET, RIM
Solicitation # SPE7L1-26-T-902K
The contract is for the supply of a LATCH SET, RIM with NSN 5340-01-695-7631 and part number E3-129-025, totaling eight units to be delivered within five days of award under solicitation SPE7L1-26-T-902K. Delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must conform to MIL-STD-129, with no special marking required. The product must be shipped in accordance with DLA packaging requirements and palletization standards. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lamps, or instrument sensors, in which case they must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List, and all specifications are governed by the revision in effect at the solicitation or award date depending on acquisition size. The delivery address is a U.S. military postal facility in FPO AP 96306-0001, while the shipping origin is a Japanese military supply location. The unit price is $8.00, resulting in a total contract value of $64.00. The required delivery date is July 30, 2026, and government use identifiers, including IPD, DIC, and FC codes, are provided for internal tracking. The official point of contact is Michael Nordahl, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L5-26-T-4732
The contract pertains to the procurement of one bracket, angle item with NSN 5340016060220 and purchase request number 7016785760, totaling four units across two line items—one unit and three units respectively—with a firm fixed price of $3.00 total and no quantity variance permitted. Delivery is required within 88 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, while hazardous materials require compliance with TQ requirement IP025. All items must be palletized per RP001 guidelines and packed with a quantity per unit pack of one. Two delivery addresses are specified: one for New Cumberland, Pennsylvania, and one for Barstow, California, with corresponding parcel post and freight shipping instructions. The required ship date is November 10, 2026, with the original delivery deadline set for January 25, 2027. Transportation directives reference DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7L5-26-T-4732, categorized under NAICS code 332510, managed by the Department of Defense’s Land Supplier Operations Engines, with primary contact Bradley Evans.
LAND SUPPLIER OPNS ENGINES

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BOOT, DUST AND MOIST
Solicitation # SPE4A5-26-T-319A
The contract pertains to the procurement of three units of BOOT, DUST AND MOIST with NSN 5340016807502 and part number 209-001-146-101, under solicitation SPE4A5-26-T-319A, with delivery required within 657 days from the contract date and a firm delivery deadline of May 29, 2028. Items must be delivered FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must comply with DLA’s standardized requirements, including MIL-STD-129 for marking and labeling, and adherence to RP001 for palletization, overriding any commercial standards like ASTM D3951. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging is acceptable only if it meets DLA’s superior technical and quality requirements referenced from the DLA Master List. Unit of issue is each (EA), and no Item Unique Identification is required as per customer request. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, with attribute classifications mandating strict verification levels. Configuration changes require formal engineering change proposals or variance requests, and all government identification must be removed from non-accepted supplies. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, with transportation governed by DLAD proc notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STANDOFF, THREADED, S
Solicitation # SPE7L1-26-T-904Q
The contract pertains to the procurement of 15 units of a threaded standoff, part number 1002346-1 with NSN 5340-01-369-9617, supplied by Simmonds Precision Products Inc located in Vergennes, VT, with CAGE code 89305. The requirement is governed by DLA packaging standards and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item must be delivered within five days after delivery order issuance, and the solicitation is issued under SPE7L1-26-T-904Q with a response deadline of August 13, 2026. The North American Industry Classification System code is 332510, and the contracting activity falls under the Department of Defense’s Land Supply Chain. The primary point of contact is Michael Nordahl, reachable via email and phone listed, and all supplies must comply with the requirement to remove government identification from non-accepted items. The solicitation is accessible through the DIBBS system and targets federal procurement under streamlined acquisition protocols.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUST
Solicitation # SPE7L1-26-T-903Z
This contract is for the procurement of one protective dust cap, identified by NSN 5340-01-696-9253 and part number 77C964400G2-FIND NO-8, under solicitation SPE7L1-26-T-903Z. The requirement is for a single unit to be delivered within 20 days of contract award, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. Packaging must fully comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping materials, and unit container codes, and palletization must adhere to DLA packaging requirements. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly authorized by the specification. Marking is unrestricted, with no special codes required, and shipping must be conducted via traceable means—parcel post is prohibited. The delivery address is the Navy Supply Logistics Center in Mechanicsburg, Pennsylvania, with contact information and government tracking codes provided for logistics and accountability. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition scale. The solicitation was posted August 2, 2026, with responses due by August 13, 2026, under a Federal NAICS code for manufacturing protective equipment.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-T-904Z
The contract pertains to the procurement of one mounting plate identified by NSN 5340-01-716-2294 and part number 22-02993-00, with a delivery requirement of five days after award. The item must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and is subject to MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging. Packaging must adhere to DLA-specific guidelines including MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA packaging requirements. The product is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be pre-approved unless explicitly permitted by specifications. The shipment is FOB origin, inspected and accepted at destination, with a zero variance tolerance on quantity. The delivery destination is Schofield Barracks, Hawaii, and the transportation and routing are governed by DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE7L1-26-T-904Z, with a required delivery date of July 24, 2026, and was posted on August 2, 2026, with responses due by August 13, 2026. The procurement falls under NAICS code 332510 and is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
DUMMY, GLADHAND
Solicitation # SPE7L1-26-T-904X
The contract pertains to the procurement of six units of NSN 5340-01-655-2270 under solicitation SPE7L1-26-T-904X, with a delivery requirement of 144 days ADO. The procurement is governed by DLA Packaging Requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirements. The contract is classified under NAICS code 332510 and is administered by the Department of Defense through the Land Supply Chain organization, with performance location set in New Cumberland, Pennsylvania, zip 17070-5002. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the primary point of contact is Geoffrey Feicht, reachable via email and phone provided. Government identification must be removed from any non-accepted supplies in accordance with requirement RQ011.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
KEY, WOODRUFF
Solicitation # SPE4A6-26-T-11HZ
The contract under reference KEY, WOODRUFF, solicitation number SPE4A6-26-T-11HZ, issued by the Department of Defense’s ASC Commodities Division, requires the delivery of 20 units of NSN 5315-01-173-9441 with a delivery deadline of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions, unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stipulated. Documentation for source approval requests must comply with RC001 standards. The supplier is strictly prohibited from intentionally adding mercury or mercury-containing compounds to any supplied hardware or materials, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. All supplies must be marked per physical identification requirements and government identification removed from non-accepted items. The point of contact is Samantha Hopkins, and performance is set in San Diego, CA, with responses due by August 10, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L4-26-T-5950
This contract specifies the procurement of a bracket, angle with NSN 5340-01-447-0485 and part number 12365165, requiring four units to be delivered within 209 days under solicitation SPE7L4-26-T-5950. Delivery is FOB origin with zero variance allowance, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which override any conflicting specifications including ASTM D3951. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must adhere to DLA requirements RP001 and MIL-STD-129 labeling, with hazardous materials following TQ requirement IP025 per Fed-Std-313 and non-hazardous materials packaged per ASTM D3951 only if not superseded by DLA standards. Palletization must conform to DLA packaging standards, and the unit of issue is each. Delivery is to DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston AL 36201-4199, with a required ship date of March 11, 2027. The contract is managed by the Department of Defense’s LSO Combat Vehicles and Armament office with Anna-Rachelle Betts as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
THERMAL COMPOUND
Solicitation # SPE7L1-26-T-906C
The contract is for the procurement of 5-ounce units of thermal compound under NSN 5340-01-699-0395 with a total quantity of four units to be delivered within five days of award. The solicitation number is SPE7L1-26-T-906C, issued by the Department of Defense’s Land Supply Chain through DLA, with a response deadline of August 13, 2026, and a posting date of August 2, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The use of Class I ozone-depleting chemicals is strictly prohibited, and any替代 chemicals require prior approval unless explicitly permitted by the specification. The contract includes RD002, indicating covered defense information applies, and requires the offeror to complete a Cybersecurity Maturity Model Certification Level 2 Self-Assessment. The place of performance is Virginia Beach, Virginia, and the primary point of contact is Isabelle Szulewska, reachable via email and phone provided. No alternate part data is currently available, and the offeror must submit a complete data package including both approved and alternate part information.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
LATCH ASSY, RADOME
Solicitation # SPE7L1-26-T-904K
The contract pertains to the procurement of 37 units of a LATCH ASSY, RADOME with NSN 5340-01-047-2407 under solicitation SPE7L1-26-T-904K, which was posted on August 2, 2026, and requires responses by August 13, 2026. Delivery is expected within 113 days after award, with performance taking place at Hill AFB, Utah, 84056-5734. The acquisition falls under NAICS code 332510 and is managed by the Department of Defense’s Land Supply Chain. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Export control restrictions apply to associated technical data, subject to ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this data is restricted to DLA contractors with valid US/Canada Joint Certification Program certification, completion of mandated DOD export control training, and prior approval from DLA. DFARS 252.225-7048 governs compliance, and removal of government identification from non-accepted supplies is also required. The point of contact for inquiries is Jason Viadero, reachable via email and phone.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE4A6-26-T-11CA
The contract is for a branched wiring harness with NSN/part number 6150-01-144-8900, requiring six units to be delivered within 245 days after order. The item is classified as technical data subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. Access is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have received explicit approval from the DLA controlling authority. The solicitation number is SPE4A6-26-T-11CA, posted on August 2, 2026, with responses due by August 10, 2026, under NAICS code 332510. The contracting activity is the ASC Commodities Division of the Department of Defense, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jessica Fuentes-Ossio, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE7L4-26-T-5949
The contract pertains to the procurement of five gear clusters, specifically spur gears identified by NSN 3020-01-228-7613, under solicitation SPE7L4-26-T-5949, with a response deadline of August 13, 2026, and a delivery requirement of 119 days after award. Technical and quality standards referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Cybersecurity compliance mandates that any third-party assessment organization involved must be CMMC Level 2 certified. The item includes technical data subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, regardless of location, and necessitating adherence to DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export-controlled data training, and approval through the DLA Export-Controlled Technical Data Questionnaire. The procurement is managed by the Department of Defense’s LSO Combat Vehicles and Armament organization, with performance located in New Cumberland, Pennsylvania, and primary point of contact Anna-Rachelle Betts via email and phone provided.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
COVER, FITTED, VEHICU
Solicitation # SPE7L4-26-U-1049
The contract solicitation SPE7L4-26-U-1049 is an Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency under the Department of Defense’s LSO Combat Vehicles and Armament office for the procurement of fitted vehicle covers with NSN 2540-01-507-7822. The contract has a maximum ceiling value of $350,000 and authorizes an estimated initial quantity of 17 units, with delivery required within 80 days from order placement under FOB Origin terms. All deliveries are restricted to the Continental United States and subject to destination inspection and acceptance by the government. Packaging and labeling must fully comply with MIL-STD-129 for identification, barcoding, and shipment documentation, superseding ASTM D3951 where applicable. Palletization follows RP001, DLA’s Packaging Requirements for Procurement. Hazardous materials must be packaged according to TQ Requirement IP025 and FED-STD-313, and labeled under OSHA’s Hazard Communication Standard (29 CFR 1910.1200), while non-hazardous items may use commercial packaging only if it meets ASTM D3951 without conflicting with the DLA Master List of Technical and Quality Requirements. The contract mandates electronic invoicing through Wide Area WorkFlow and requires full compliance with safeguarding requirements for covered defense information under DFARS 252.204-7012 and NIST SP 800-171 controls. All ocean shipments must use U.S.-flag vessels unless a formal waiver is obtained at least 45 days prior to sailing, with detailed reporting required to MARAD. The solicitation includes mandatory clauses on small business representation, equal opportunity, combating trafficking, employment eligibility verification, and prohibition of covered defense telecommunications equipment. Offerors must provide their Unique Entity ID and CAGE code and affirm compliance with socioeconomic and cybersecurity obligations. The contract is part of a simplified acquisition process, submitted via DIBBS by the August 17, 2026 deadline, and no options or extension clauses are provided beyond the one-year ordering period.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332999
New
DIBBS
HOSE, PREFORMED
Solicitation # SPE7L4-26-T-5953
The contract pertains to the procurement of one unit of preformed hose identified by NSN 4720-01-170-5006 and part number 10511782, with a total quantity of 13 units to be delivered under solicitation SPE7L4-26-T-5953. The item is classified as a critical application component and must comply strictly with DLA packaging requirements as outlined in RP001, superseding any other standards such as ASTM D3951. All packaging and labeling shall adhere to MIL-STD-129, with the unit of issue and quantity per unit pack defined by the contract. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occurring at the destination facility located at Tracy, California. The required delivery date is 158 days after award, with an original due date of March 25, 2027, and a needed ship date of January 19, 2027. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation or award date depending on acquisition type. Transportation instructions are governed by DLA procedural notes C19 and C20. The contract specifies a fixed unit price of $13.00 per unit, totaling $169.00, and the point of contact is Anna-Rachelle Betts, reachable via DLA email and phone.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L4-26-T-5951
The contract specifies the procurement of 12 units of an air dryer and cooler system for pipeline applications under NSN 0001S00000053, with a delivery deadline 279 days after contract award. All components must conform to source-controlled drawings and originate from approved sources listed on those drawings. The product must comply with stringent technical and quality requirements outlined in the DLA Master List, including tailored higher-level quality standards, configuration change management procedures, and qualified manufacturers or products lists where applicable. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval. Inspection and acceptance must occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Sampling and verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs. Fat testing is required per two specified drawings, with two samples to be tested and 20 days’ notice provided to the government before testing begins. The contract mandates compliance with DLA packaging standards, measuring and test equipment requirements, and enforcement of quality assurance provisions. The purchasing agency is the Department of Defense under LSO Combat Vehicles and Armament, with performance to be delivered to Tracy, CA, 95304-5000. The solicitation, issued under SPE7L4-26-T-5951, closed for responses on August 13, 2026, with the contractor required to meet all technical, quality, and administrative conditions outlined in the document without deviation unless formally approved. The primary point of contact is Anna-Rachelle Betts at DLA, with all correspondence and inquiries directed through the provided email and phone number.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L4-26-T-5958
This contract specifies the procurement of one unit of a box and accessories stowage item with NSN 2540-01-578-5169, under solicitation SPE7L4-26-T-5958, with a required delivery within ten days of contract award and delivery terms set at FOB origin. The item must comply with all applicable DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any conflicting specification requirements, including the prohibition of Class I ozone-depleting chemicals and the requirement for approved substitutes. Packaging must adhere strictly to MIL-STD-129 for marking and labeling, and to DLA Packaging Requirements for Procurement, with commercial packaging in accordance with ASTM D3951 unless the item is hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All packaging and palletization must conform to specified standards, and the unit must be physically identified in accordance with MIL-STD-130. The item contains components governed by Qualified Products Lists or Qualified Manufacturers Lists, requiring strict compliance with procurement note H02. The delivery destination is US Army SSA Powidz AB, Poland, and the point of inspection and acceptance is at destination. The contract mandates a Certificate of Conformance unless explicitly withheld by a Quality Assurance Letter of Instruction, and all documentation must align with the exact revision levels of referenced technical data packages and drawings issued up through 2026. No quantity variance is permitted.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336330
New
DIBBS
PARTS KIT, HAND BRAK
Solicitation # SPE7L4-26-U-1046
This contract pertains to a parts kit for a hand brake, identified by the NSN 2530-01-652-7219 and part number 12449370, with a quantity of 19 units to be delivered under solicitation SPE7L4-26-U-1046. The delivery is required within 75 days after award, with delivery terms set at FOB origin, and no variance in quantity is permitted—precisely 19 units must be supplied. All items must comply with stringent technical and quality specifications referenced from the DLA Master List, including tailored higher-level quality requirements and packaging standards aligned with MIL-STD-2073-1E, Appendix D, for kits. Packaging and marking must adhere to MIL-STD-129 and DLA’s procurement packaging requirements, with no ozone-depleting chemicals allowed under any circumstances; substitutions require prior approval unless explicitly authorized. Inspection and acceptance occur at the origin, and all items must be packaged with preservation methods designated as ZZ, with unit packaging marked appropriately under packing code U. The contract is set aside entirely for small businesses and is managed by the Department of Defense’s Combat Vehicles and Armament division, with Heather Kessler listed as the primary point of contact.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
BRACKET, TOW HOOK
Solicitation # SPE7L4-26-T-5952
The contract pertains to the procurement of one Bracket, Tow Hook with NSN 2540-01-699-9375 and purchase request number 7017696424, under solicitation SPE7L4-26-T-5952. The item must adhere to strict technical and quality standards referenced through R and I numbers from the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The part must be manufactured and packaged in accordance with TDP Revision A Gen 1 based on reference drawings 19207 12644209 and 19207 12644210, with the most recent revision dated June 30, 2024. Packaging must meet MIL-STD-2073-1E specifications, including preservation method 10, packaging material code 00, wrap material FA, and unit container D3, with marking required to comply with MIL-STD-129 and no special marking codes applied. Palletization must follow DLA Packaging Requirements for Procurement, and the item is to be delivered FOB origin to the specified receive warehouse in Tracy, California. Inspection and acceptance occur at destination with zero variance allowed in quantity. The required delivery date is March 4, 2027, with a lead time of 202 days. The contract is administered by the Department of Defense, LSO Combat Vehicles and Armament, with primary point of contact Anna-Rachelle Betts.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
FLOAT, BALLOON
Solicitation # SPE7L4-26-T-5948
The contract pertains to the procurement of 50 units of FLOAT, BALLOON under solicitation SPE7L4-26-T-5948, with a response deadline of August 13, 2026, and delivery required within 84 days after award. The item is classified under NAICS code 326299 and is managed by the Department of Defense through the LSO Combat Vehicles and Armament organization, with performance located in San Diego, California. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning unauthorized disclosure—包括 to foreign nationals within the U.S.—is prohibited without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program status, completion of required DLA export control training, and formal approval from DLA may access the controlled data. The point of contact for inquiries is Kristen Elliott, reachable via email and phone listed in the contract details.
All Other Rubber Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
LEVER, BREECHBLOCK, COCK
Solicitation # SPE7L4-26-T-5956
The contract specifies the procurement of 37 LEVER, BREECHBLOCK, COCKING components identified by NSN 1005-13-116-2146 under solicitation SPE7L4-26-T-5956, with a delivery deadline of 178 days after award. The item is classified as a defense article subject to the International Traffic in Arms Regulations (ITAR) and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls. Failure to provide proof of DDTC registration will render any offer ineligible for award. Technical data associated with the item is export-controlled under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program credentials, completed DOD export control training, and DLA authorization. The procurement is subject to strict packaging standards, prohibition of ozone-depleting chemicals, and cybersecurity requirements mandating CMMC Level 2 certification. Government identification must be removed from non-accepted supplies, and demilitarization procedures apply as the item falls under Category I munitions. The contract is managed by the Department of Defense's Combat Vehicles and Armament office, with performance directed to Cherry Point, North Carolina, and primary contact information provided for inquiries.
Other Support Activities for Air Transportation

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
EQUIPMENT KIT, VEHIC
Solicitation # SPE7L4-26-T-5947
The contract solicitation SPE7L4-26-T-5947 seeks the procurement of 10 Equipment Kits, VEHIC with NSN 2540-01-707-7193 under a Total Small Business Set-Aside, with a response deadline of August 13, 2026, and a delivery requirement of 144 days after order. All components must conform to source control drawings and be sourced exclusively from approved suppliers listed on those drawings. The equipment must comply with stringent technical and quality standards referenced from the DLA Master List, including requirements for configuration change management, qualified products and manufacturers lists, and physical marking of bare items. The kit must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. Cybersecurity compliance is mandatory, requiring CMMC Level 2 certification by a certified third-party assessment organization, and the handling of technical data is subject to export controls under ITAR or EAR, restricting access to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA training and documentation. Inspection and acceptance may occur at the manufacturer’s origin, and vendor item control drawings govern all aspects of design and fabrication. Technical data associated with the kit is export-controlled, and its dissemination to foreign persons—even within the U.S.—is prohibited without explicit authorization. The delivery location is New Cumberland, PA, and primary point of contact is Anna-Rachelle Betts of the Department of Defense’s LSO Combat Vehicles and Armament office.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L4-26-T-5943
The contract pertains to the procurement of a single unit of a box and accessories designated by NSN 2540016429281 and part number B38, supplied by SIEMENS ENERGY AND AUTOMATION INC, under solicitation SPE7L4-26-T-5943. Delivery is required within five days of award, FOB origin, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must conform to RP001 specifications. Hazardous materials, if applicable, must meet TQ requirement IP025 per FED-STD-313, while non-hazardous items must be commercially packaged. Use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly authorized by specification. The shipment must be sent via traceable freight methods, excluding parcel post, to the designated military address at Fort Hood, Texas, with specific marking and shipment instructions including the TCN W80XYJ62080280 and project code TP 1. The required delivery date is July 30, 2026, and all government-specific identifiers and codes must be accurately applied for tracking and compliance.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details