Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

BRT System Installation and Site Integration

Active

Federal

Response Deadline08/17/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the on-site delivery, physical installation, and full integration of BRT units into airport checkpoint environments, requiring close coordination with TSA and local airport authorities to ensure seamless deployment within secure operational zones. This work demands strict adherence to security protocols and regulatory standards, with all activities centered at the specified performance location in Springfield, zip code 22150. The contractor is responsible for end-to-end execution including equipment handling, site preparation, system configuration, and collaboration with government personnel to achieve successful operational handover. Support for Site Acceptance Testing is a critical component, requiring the contractor to facilitate and participate in formal testing procedures to validate system performance, reliability, and compliance with federal security requirements. The contract is classified as a subcontract under NAICS code 238210, posted on July 24, 2026, with proposals due by August 17, 2026. The awarding agency is the Department of Homeland Security under its Security Technology division, and all work must align with the agency’s operational needs and timelines without deviation from the specified performance location or technical requirements.

General Info

BRT units installed and integrated at Springfield airport under DHS Security Technology, compliant with TSA protocols.

Agency

Department Of Homeland Security → Security TechnologyView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Springfield, VA, 22150, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 06:00:00 PM UTCin 22 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Security Technology

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Security Technology

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site delivery, physical installation, and integration of BRT units into airport checkpoint environments, including coordination with TSA and airport authorities and support for Site Acceptance Testing.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, 3 service elevators, and 3 ramp landing elevators. This work is part of a broader effort to enhance safety and emergency communication capabilities within the facility. The project is managed by the Port of Seattle’s Aviation Project Management Group, with Angela Peterson serving as the primary point of contact and Christina Burdett as the project manager. The solicitation was posted on July 26, 2026, and falls under NAICS code 238210, which corresponds to electrical contracting services. While no set-aside details or specific deadlines are provided, the contract is listed as a forecast indicating the agency anticipates proceeding with procurement. All installations will occur on-site at the Port of Seattle facility, and inquiries should be directed to the provided contact information.

Aviation Project Management Group

POSTED

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle is forecasting the third phase of a project to replace 125 failing Robicon Variable Frequency Drives with new equipment, aiming to enhance operational efficiency and reliability across its aviation facilities. This contract requires full removal and installation of the new VFDs, along with comprehensive wiring, testing, and commissioning to ensure seamless integration into the existing infrastructure. A critical component of the project is connecting all new VFDs to the Port’s Direct Digital Controller system to enable real-time monitoring of energy usage, output control readings, and system efficiency, supporting long-term energy management goals. The work is scoped under NAICS code 238210, indicating it falls within the electrical contracting category, and will be executed under a design-bid-build delivery method. The project is being managed by the Aviation Facilities & Infrastructure division of the Port of Seattle, with primary point of contact Yanet Maldonado and Project Manager Sharon Miick available for coordination. While specific timelines and funding details are not provided in the forecast data, interested parties are directed to the official solicitation portal for further information, with the forecast posted on July 26, 2026. Performance will occur at Port of Seattle facilities, though exact locations are not specified.

Aviation Facilities & Infrastructure

POSTED

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract entails the design, permitting, and construction of a new security camera system across the Bagwell and North Cargo Operations areas at the Port of Seattle, aimed at enhancing operational surveillance and enforcement capabilities. A total of 50 high-resolution cameras will be installed at 43 distinct locations to replace and expand upon existing systems that currently focus primarily on conveyor systems and security doors. The installation will significantly improve coverage along main terminal drive lanes and entrances in the Bagwell area, providing clearer imagery for forensic investigations and better compliance monitoring of the Port’s movement rules and regulations. In the North Cargo area, the system will deliver flexible, broad-area monitoring through pan-tilt-zoom cameras that can be manually controlled to cover dynamic operational spaces and bridge gaps in existing surveillance. The project is classified under NAICS code 238210 for electrical contractors and is managed by the Aviation Project Management Group within the Port of Seattle. The primary point of contact is Angela Peterson, with Randa Williams serving as the project manager. The solicitation was posted on July 26, 2026, and no set-aside provisions have been designated. All work is expected to be performed on-site at the Port of Seattle, with no specific city or state details provided in the public data. The system is designed to ensure comprehensive, adaptable, and high-quality video coverage to support both safety and regulatory enforcement across critical cargo handling zones.

Aviation Project Management Group

POSTED

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam system containing PFAS at the Rental Car Facility located in SeaTac with a fully compliant dry fire suppression system. The project entails the complete removal of contaminated foam and related components, followed by the design and installation of a new dry system including tanks, valves, pumps, sprinkler lines, sprinkler heads, and reserve tanks. The new system must be integrated with the facility’s existing Fire Alarm System to ensure full functionality and compliance with safety standards. This effort is part of a broader initiative to eliminate PFAS materials and transition to environmentally safer fire protection technologies. The contract is being rebid under the NAICS code 238210 for plumbing, heating, and air-conditioning contractors, and the primary point of contact for inquiries is Todd Rehm, with project management oversight provided by Pat Nakamura. The solicitation is forecasted for release, with no set aside type specified, and interested parties should reference the official portal for updates and formal documentation.

Aviation Project Management Group

POSTED

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage, which is critical for maintaining operations of ticketing kiosks and associated automated gates during power outages. The replacement scope encompasses the installation of new UPS equipment along with all supporting electrical infrastructure, including subpanels, electrical feeders, disconnects, and circuit breakers, ensuring seamless integration and reliable backup power. The new UPS units will be equipped with data connectivity features to enable remote alarm monitoring and system diagnostics, enhancing operational oversight and preventive maintenance capabilities. The project is under the auspices of the Port of Seattle’s Aviation Project Management Group and is classified under NAICS code 238210, indicating it falls within the electrical contracting industry. The solicitation was posted on July 26, 2026, and is currently in forecast status, meaning it is a notice of anticipated procurement rather than an active bid opportunity. Primary point of contact for inquiries is Yanet Maldonado, with JJ Jordan serving as the project manager; both can be reached via phone or email provided. The work is expected to be performed at the parking garage facility managed by the Port of Seattle, although specific location details are not provided in the data.

Aviation Project Management Group

POSTED

DEADLINE

Electrical Unit Price Portwide 2026The contract titled Electrical Unit Price Portwide 2026 encompasses a wide range of electrical work to be performed across multiple Port of Seattle locations including Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. The scope includes installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, testing, grounding, and other related equipment and devices, all in strict compliance with applicable code requirements from enforcing agencies. The Contractor is responsible for providing all labor, tools, materials, equipment, and incidentals necessary to fulfill work orders issued through the Port’s Work Authorization process. Labor must be staffed according to the specified classifications outlined in the Schedule of Unit Prices, ensuring standardized pricing and workforce categorization. The contract is forecasted for 2026 and falls under NAICS code 238210, indicating its classification as electrical contracting services. It is managed by the Port Construction Services division of the Port of Seattle, with Heather Bowden serving as the primary point of contact and Lesley Miles as the Project Manager. The work will occur at various Port-wide sites, requiring coordination across multiple operational areas. There is no set-aside designation indicated, and the solicitation is available for review through the Port’s online portal. Contractors must be prepared to respond to dynamic project needs, with pricing governed by the established unit rate schedule and all work subject to the Port’s authorization and compliance protocols.

Port Construction Services

POSTED

DEADLINE

Electrical System Upgrades and Rough-InsThe contract titled Electrical System Upgrades and Rough-Ins involves the installation or modification of electrical conduits, outlets, lighting fixtures, and switches to align with a new office layout. The work falls under NAICS code 238210 and is structured as a subcontract under the Government of Jamaica through the Ministry of Water Environment and Climate Change. All work must be performed at the designated government facility, though specific location details are not provided. The solicitation was posted on July 25, 2026, with a strict response deadline of August 17, 2026, at 7:00 PM. Interested parties must submit proposals through the official Government of Jamaica e-procurement portal prior to the deadline to be considered for award. There is no set-aside designation indicated for small businesses or other categories, and no point of contact is listed for inquiries.

Ministry of Water Environment and Climate Change

POSTED

about 22 hours ago

DEADLINE

Electrical Systems and Power DistributionThis contract is a small business set-aside for the installation of comprehensive electrical systems and power distribution infrastructure, including power distribution systems, emergency generators, lighting, variable frequency drives, and supporting electrical components. The work is to be performed in Portland, Oregon, with a performance location zip code of 97204, and is classified under NAICS code 238210, which corresponds to electrical contracting. The opportunity is designated as a Total Small Business Set-Aside under SBA regulations, meaning only small businesses are eligible to bid, ensuring participation from qualified small business contractors. The solicitation was posted on July 25, 2026, with a firm deadline for responses on August 5, 2026, at 10:00 PM Eastern time. The contracting organization is the Department of Defense through its W071 Endist Portland office, indicating this effort supports defense-related infrastructure needs. All bid submissions must comply with federal acquisition requirements, and the contract award will be made to a capable small business that can deliver the full scope of electrical work in accordance with technical and regulatory standards.

W071 Endist Portland

POSTED

DEADLINE

Commercial Kitchen Equipment Installation & Electrical IntegrationThe contract entails the full installation of all commercial kitchen equipment with comprehensive electrical integration to NEMA 6-30P standards, requiring precise wiring and power configuration to support heavy-duty appliances. Facility modifications are included to accommodate the new equipment layout, ensuring structural, ventilation, and plumbing compatibility, followed by rigorous operational testing to validate functionality, safety, and compliance with industry requirements. The work is scheduled for performance in San Diego, California, at the 92136 ZIP code, under the oversight of the Naval Supply Systems Command Fleet Logistics Center San Diego, a Department of Defense entity. This subcontract falls under NAICS code 238210, classifying it as commercial and industrial machinery and equipment installation. The solicitation was posted on July 25, 2026, with bids due by July 31, 2026, at 7:00 PM, leaving a limited window for qualified contractors to respond.

Navsup Flt Logistics Ctr San Diego

POSTED

DEADLINE

Electrical Systems and LightingThe contract entails the installation of a 100 KVA underground electrical service along with complete lighting systems and related electrical infrastructure, targeting a specific site in Higashimatsushima with postal code 981-0503. This is classified as a subcontract under NAICS code 238210, which corresponds to electrical contracting services, and is issued by the Department of Defense under the office designation FA5025 356 Eceg Pk. The solicitation was posted on July 25, 2026, with a mandatory response deadline of August 7, 2026, at 2:00 AM, requiring all proposals to be submitted before that time to be considered. The scope of work covers all necessary components to establish a fully functional underground power supply and lighting network, including trenching, conduit placement, transformers, distribution panels, light fixtures, and compliance with applicable electrical codes and safety standards. While no set-aside designation is specified, the location and agency suggest this installation supports defense-related facilities or operations in the region, necessitating strict adherence to security, environmental, and operational requirements.

FA5025 356 Eceg Pk

POSTED

DEADLINE

Emergency Generator SetupThe contract titled Emergency Generator Setup is a subcontract under a Service-Disabled Veteran-Owned Small Business Set Aside, designated for the installation of a backup emergency generator to ensure uninterrupted operation of boiler and control systems during power outages. The work is to be performed in Dublin, Georgia, with a ZIP code of 31021, and falls under the NAICS code 238210 for electrical contractors and other wiring installation contractors. This initiative is managed by the Department of Veterans Affairs through its 247-NETWORK Contract Office 7, emphasizing support for veteran-owned businesses while safeguarding critical infrastructure essential for facility functionality and safety. The solicitation was posted on July 25, 2026, and while no point of contact or specific agency address details are provided, the contract is accessible via the SAM.gov platform for further information.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Site ElectricalThe contract titled Site Electrical is a subcontract for the installation of comprehensive electrical systems, encompassing power distribution, lighting, grounding, and site electrical infrastructure. It is issued by Novi Community Schools in Michigan under NAICS code 238210, which classifies it as electrical contracting work. The solicitation was posted on July 25, 2026, with a response deadline of August 11, 2026, at 4:00 PM, providing potential bidders approximately three weeks to prepare and submit proposals. The contract does not specify a set-aside classification or designate a point of contact, and while the exact location of performance is not detailed, it is understood to be within the jurisdiction of the Novi Community Schools. Proposals must be submitted through the provided Michigan state procurement portal link.

Novi Community Schools

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → Security Technology

Same awarding agency

Small Business Subcontracting and Set-Aside ParticipationCertified small businesses are invited to participate in subcontracting opportunities under a contract managed by the Department of Homeland Security through its Security Technology office, with performance centered in Springfield, 22150. The effort is structured to prioritize small business involvement across technical, logistics, training, and maintenance functions, with aggressive subcontracting goals designed to maximize participation from certified small businesses. The solicitation is open for responses until August 17, 2026, and is tied to NAICS code 811212, indicating a focus on personal and household goods repair and maintenance services. Participation is open to eligible small businesses seeking to contribute under a subcontracting framework, though specific set-aside details are not defined in the available data. Interested parties must engage through the official SAM.gov portal prior to the deadline to be considered.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Logistics and Nationwide Delivery ServicesThe contract requires secure, climate-controlled transportation and delivery of BRT units to multiple U.S. airports, ensuring all shipments maintain strict environmental conditions throughout transit. Real-time tracking and barcoding systems must be implemented to monitor every unit’s location and status, with full chain-of-custody documentation to guarantee accountability from origin to final destination. Compliance with security and logistical standards is mandatory, and all operations must align with federal requirements for handling sensitive equipment across state lines. This subcontract, posted by the Department of Homeland Security under the agency name Security Technology, is set for a response deadline of August 17, 2026, and falls under NAICS code 484220, indicating specialized freight transportation services. The place of performance is specified as Springfield with a zip code of 22150, although deliveries will occur at multiple airport locations nationwide. The contract emphasizes precision, security, and traceability, demanding end-to-end visibility and documentation to support federal operational integrity and regulatory adherence.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

2-Year Technical Support and Maintenance ServicesThis contract entails the provision of comprehensive technical support and maintenance services for BRT units across multiple U.S. airports, with a focus on ensure continuous operational reliability under strict service level agreement requirements. The scope includes ongoing preventive maintenance, remote diagnostics, and on-site repairs to address equipment failures promptly and minimize downtime, all tailored to the high-stakes environment of federal airport infrastructure. Services must be delivered in compliance with performance benchmarks and response timelines defined by the agreement, with a strong emphasis on reliability, efficiency, and regulatory compliance. The contract is a two-year subcontract awarded under NAICS code 811212 and is managed by the Department of Homeland Security through its Security Technology division. The place of performance is concentrated in Springfield, with work extending to various airport locations nationwide. Proposals must be submitted by August 17, 2026, following a posting date of July 24, 2026. While specific staffing or certification requirements are not indicated, the nature of the work demands qualified technical personnel capable of operating within secure, federally regulated transportation environments, with a proven ability to meet rigorous SLA obligations across geographically dispersed locations.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Technical Training and Knowledge TransferThe contract requires the development and delivery of comprehensive technical training programs for Transportation Security Administration personnel focused on the operation, maintenance, and troubleshooting of BRT systems. This includes creating detailed user manuals and providing hands-on, on-site instruction to ensure personnel are fully capable of managing the systems effectively. The training must be tailored to the specific needs of TSA staff and delivered in a manner that supports long-term operational readiness and technical proficiency. The contract is identified under NAICS code 611430 and is classified as a subcontract under the Department of Homeland Security’s Security Technology division. The place of performance is designated as Springfield with a ZIP code of 22150. Proposals must be submitted by August 17, 2026, with the solicitation posted on July 24, 2026. There is no set-aside designation, and while no point of contact is listed, the full opportunity can be accessed through the provided SAM.gov link.

Professional and Management Development Training

POSTED

DEADLINE

BRT System Manufacturing and AssemblyThe contract award is for the manufacture, integration, and testing of Bulk Resolution Technology units that utilize Raman Spectroscopy to identify hazardous liquids within opaque containers, specifically designed to meet Transportation Security Administration requirements for physical dimensions, detection capacity, and Technology Readiness Level 8 certification. The work involves producing fully functional units capable of reliable field deployment in security environments, ensuring consistent performance under operational conditions. The solicitation, managed by the Department of Homeland Security under the agency name Security Technology, is classified as a subcontract with a North American Industry Classification System code of 334511, indicating it falls within optical instrument and equipment manufacturing. Performance is designated for Springfield, with a response deadline of August 17, 2026, and the opportunity was posted on July 24, 2026. All units must be completed and validated to ensure full compliance with TSA standards prior to delivery, with no set-aside provisions specified for this procurement.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Bulk Resolution Technology (BRT) systems and maintenanceThe Transportation Security Administration is seeking proposals for Bulk Resolution Technology (BRT) systems to improve security screening operations at airports across the United States under an open-market competitive acquisition governed by FAR Part 12 for commercial items. The procurement is classified under NAICS code 334511, which corresponds to the manufacturing of aeronautical and navigation systems. All inquiries must be submitted via email to Siobhan Mullen and Matthew Coniglio no later than 2:00 PM EDT on August 7, 2026, with proposals due no later than 2:00 PM EDT on August 17, 2026. Submission must be made electronically to the same email addresses, and the solicitation includes essential attachments: the SF-1449 form, a pricing template, a questions template, ITAR terms and conditions, and a list of tentative airport locations where systems may be deployed. The contract requires compliance with ITAR regulations, and performance will be centered at the TSA’s office in Springfield, Virginia, with systems potentially installed at multiple locations nationwide. No set-aside provisions apply, and the acquisition is open to all qualified commercial vendors.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Project Management & Coordination for Multi-Site RolloutsThe contract involves managing the end-to-end coordination for the rapid deployment of security screening systems across multiple airport locations, with a focus on scheduling, stakeholder engagement, and regulatory compliance reporting. The prime contractor will be responsible for aligning timelines, resources, and communication among technical teams, airport authorities, and federal agencies to ensure seamless implementation while meeting strict security and operational standards. The work requires meticulous planning to accommodate the unique constraints of each airport environment and the need for minimal disruption to passenger flow during installations. This is a subcontract under the NAICS code 541611, assigned to the Department of Homeland Security’s Security Technology office, indicating it supports critical infrastructure protection efforts. While set-aside details and point of contact information are not provided, the placement of performance is broadly defined across multiple federal airport sites, requiring nationwide logistical capability. The contract emphasizes compliance with federal regulations and demands a high degree of coordination to meet deployment deadlines, with all activities tied to the broader mission of enhancing nationwide transportation security through standardized and efficiently rolled-out screening technologies.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Onsite Technical Support & Maintenance ServicesThe contract requires provision of Tier 1–2 technical support, preventive maintenance, and emergency repairs for deployed CT, AIT, and BRT systems across multiple operational locations. Services must be delivered on-site to ensure continuous functionality and rapid resolution of system issues, with a focus on minimizing downtime and maintaining operational readiness. The work spans a broad range of technical tasks including troubleshooting, calibration, component replacement, and system upgrades as needed to support mission-critical security technologies. This is a subcontract under the Department of Homeland Security’s Security Technology division, classified under NAICS code 811212 for electronic equipment repair and maintenance. The contract was posted on July 1, 2026, and performance is expected to occur at various unspecified sites without a fixed central location. There is no set-aside designation, and the contract does not include specific geographic boundaries or point of contact details. All work must adhere to the operational requirements of federal security infrastructure, with an emphasis on reliability, response time, and compliance with established technical protocols.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Specialized Rigging and Heavy Equipment TransportThe contract involves the specialized transport, lifting, and precise positioning of sensitive screening equipment within confined operational areas at airport checkpoints. The work requires advanced rigging and material handling techniques tailored to the unique spatial and safety constraints of secure aviation environments, ensuring equipment is moved without disruption to security operations or risk to personnel and infrastructure. The scope demands a high level of technical expertise, strict adherence to security protocols, and the ability to operate effectively in high-traffic, low-tolerance settings where precision and reliability are paramount. This is a subcontract under the NAICS code 238990, issued by the Department of Homeland Security’s Security Technology office, with a posting date of July 1, 2026. The place of performance is tied to airport checkpoints across the nation, though specific locations are not detailed. The contract does not specify a set-aside type or point of contact, and the award will be managed through the SAM.gov platform, with bidders expected to meet stringent operational standards for handling critical security equipment in dynamic and regulated environments.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Credential Authenticated Technology (CAT) Remediation Site SetupThe Contract involves the configuration and installation of Credential Authenticated Technology (CAT) remediation kiosks designed to enhance traveler identity verification through biometric authentication and secure network integration. These kiosks will be deployed to streamline and automate identity checks, reducing manual processing and improving security efficacy at designated sites. The solution requires seamless interoperability with existing government systems, adherence to stringent cybersecurity protocols, and robust data protection measures to ensure the integrity and confidentiality of biometric and personal identifiers. This subcontract is issued under the NAICS code 541512, indicating it is for computer systems design and related services, and is managed by the Department of Homeland Security through its Security Technology arm. The contract was posted on July 1, 2026, and the place of performance has not been specified, suggesting deployment may occur across multiple locations under DHS oversight. All work must align with federal standards for secure infrastructure, and the project demands technical expertise in biometric systems, network security, and systems integration to meet operational requirements for high-volume traveler screening environments.

Computer Systems Design Services

POSTED

DEADLINE

Bulk Resolution Tools (BRT) and NextGen Liquid/Powder Scanner DeploymentThe contract involves the installation and commissioning of Bulk Resolution Tools and next-generation liquid and powder scanners at Transportation Security Administration sites, encompassing all necessary utility connections, data system integrations, and operational handover procedures. This subcontract focuses on deploying advanced screening technology to enhance security operations, requiring precise technical execution and seamless coordination across multiple site locations to ensure full functionality and compliance with federal security standards. The work is scoped under NAICS code 238210, indicating specialized construction services for mechanical and electrical systems, and is managed by the Department of Homeland Security’s Security Technology division with an anticipated start date in July 2026. All activities must be completed in alignment with existing infrastructure and regulatory protocols to support uninterrupted airport and transit security workflows.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Advanced Imaging Technology (AIT) Deployment & RelocationThe contract involves the full lifecycle deployment of Advanced Imaging Technology units, encompassing site preparation, installation, calibration, and eventual decommissioning, primarily in support of airport renovation and reconfiguration projects. The work requires specialized expertise in handling sensitive security equipment under strict operational timelines and environmental conditions typical of active airport environments. All phases must adhere to stringent technical and safety standards to ensure uninterrupted security operations during transitions. This subcontract is issued under the NAICS code 238210 for other building equipment contractors and is managed by the Department of Homeland Security’s Security Technology office. Although specific details such as location, point of contact, or set-aside status are not provided, the scope implies a high level of coordination with federal security protocols and infrastructure teams. The contract was posted in July 2026 and is accessible through the SAM.gov platform, indicating it is part of a broader federal procurement effort aimed at modernizing and maintaining aviation security systems across multiple sites.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE