Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Building 1860 Roof Repairs

Active
N4008526R9060Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Only Roofing MACC Contractors listed on the General Requirements cover page are eligible to submit proposals for Building 1860 Roof Repairs at Camp Lejeune, North Carolina, under solicitation N4008526R9060. This is a Total Small Business Set-Aside under FAR 19.5, with the NAICS code 238160, and award will be made to the lowest priced responsive offer, subject to compliance with the Buy American statute, where foreign material costs will be adjusted upward for evaluation and preference given to offers not requesting exceptions. The project requires systematic demolition and new roofing work per the New Work Roof Plan and Demolition Roof Plan, including addressing High and Low Roof Fastening Zones, with demolition conducted from top to bottom under an approved plan. Hazardous materials such as lead, cadmium, and chromium at the roof ladder must be addressed, though encapsulation is permitted and full removal is not required. All work must comply with EM 385-1-1, OSHA standards including 29 CFR 1910, 1926, and 1915, and must include a Site Safety and Health Plan, confined space entry plan, and a Quality Control Plan accepted prior to any work beyond mobilization. Materials must be delivered in manufacturer’s sealed, undamaged containers with full labeling including specification, brand, batch, and environmental data where applicable; hazardous asbestos waste must be double-wrapped in 6-millimeter plastic, sealed with duct tape, labeled, and manifested. Paints must be in 5-gallon or smaller containers, and sealants must be clearly marked with type, class, grade, and use. Equipment must conform to MIL-STD-462 and MIL-STD-461. Bonding requirements depend on proposal value: no bonds for bids under $35,000, payment bond only for bids between $35,000 and $149,999, and bid, payment, and performance bonds for bids $150,000 and above, with the bid bond equal to 20% of the proposal amount. Insurance coverage per FAR 28.307-2 must be maintained throughout performance. All proposals must be emailed to the point of contact by 1:00 PM EST on August 3, 2026, with site visit held on July 8,

General Info

Only MACC-listed small businesses may bid on Camp Lejeune roof repair by August 3, 2026, under NAICS 238160.

Agency

Department Of Defense → Navfacsyscom Mid-AtlanticView Agency

NAICS

238160 - Roofing ContractorsView NAICS

Place of Performance

Camp Lejeune, NC, 28547, USA

Set-Aside

SBA

Documents

(10)

N4008525B0004 Drawings Signed

PDFother

Amendment 0001 to Solicitation N40085-26-R-9060 for Building 1860 Roof Repairs

PDFamendment

NAVFAC Solicitation N40085-26-R-9060 Building 1860 Roof Repairs

PDFrfp

Asbestos Inspection Report Building 1860 MCB Camp Lejeune

PDFinspection-report

Asbestos Survey Report for Building 1860 Roof Repairs MCB Camp Lejeune

PDFsurvey-report

Amend+0002.pdf

PDF

Basis of Design for Roofing Replacement at MCB Camp Lejeune Building 1860

PDFbasis-of-design

NAVFAC Specification 25-0004 Building 1860 Roof Repairs at Marine Corps Base Camp Lejeune

PDFspecifications

Lead Paint Survey Report for Building 1860 Roof Repairs MCB Camp Lejeune

PDFreport

Appendix D Building Information Checklist for Facility B1860

PDFsow

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

2 updates
PhaseCombined Synopsis
Posted

Combined Synopsis

Amendment 1

Contract was updated

Amendment 2

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navfacsyscom Mid-Atlantic
Contacts2 people available
OfficeNORFOLK, VA, 23511-0395, USA
Organization / Agency
Department Of Defense → Navfacsyscom Mid-Atlantic
View Agency Profile
Office AddressNORFOLK, VA, 23511-0395, USA

Full Description

Show more

Only Roofing MACC Contractors listed on the General Requirements cover page may submit a proposal for this ROICC Camp Lejeune area of responsibility project.  See attached documents for scope of work and any applicable drawings.

Similar Contracts

Same NAICS industry code

NAICS: 238160
New
SLED
Fishermen's Terminal C-15 Building ImprovementThe Port of Seattle through its Waterfront Project Management division is preparing to undertake significant improvements to Building C-15 at Fishermen’s Terminal, with work scheduled to begin in 2026. The project will encompass a comprehensive rehabilitation of the building’s exterior and structural components, including the complete replacement of the existing roof gutters, installation of new roof top vents, replacement of 151 windows, repair or replacement of the building cladding, and structural integrity upgrades to the tower structure. This scope of work is designed to enhance the building’s durability, weather resistance, and long-term functionality while maintaining its operational role at the terminal. The North American Industry Classification System code for this undertaking is 238160, indicating it falls under roofing contractor services. The project is forecasted and not yet solicited, but interested contractors can expect a formal bidding process to follow. Valarie Jarvi serves as the primary point of contact for all inquiries related to the project and can be reached via email or phone, while Rod Jackson is listed as the Project Manager overseeing the initiative. All work will take place at Fishermen’s Terminal in Seattle, though specific street address details are not provided in the public forecast. The official portal for additional information and future solicitation documents is available through the Port of Seattle’s procurement website. This project represents a key infrastructure investment to sustain the operational safety and appearance of a critical component of the terminal’s facility.
Waterfront Project Management

POSTED

about 3 hours ago

DEADLINE

N/A
View Details
NAICS: 238160
New
SLED
Wyoming Boys School Roof Replacements - State Construction Dept.The Wyoming State Construction Department is soliciting bids for a roof replacement project at the Wyoming Boys School in Worland, Wyoming, with all submissions due by 1:00 p.m. Mountain Time on August 31, 2026, through the Public Purchase online bidding system. The project entails removing existing single-ply membrane roofing from four dormitory buildings and part of the maintenance building, repairing damaged decking as necessary, installing new roofing materials, flashing, and trim, and replacing any wet insulation. The total scope involves approximately 455 squares of roofing work. All bids must be submitted via the Public Purchase platform using official State of Wyoming forms; only submissions completed and fully uploaded by the deadline will be accepted, as the system locks precisely at the deadline and incomplete submissions will be disqualified. Bidders are required to register on Public Purchase in advance, noting that account activation may take up to 24 hours, and must access all project documents, addenda, and responses to questions exclusively through the website. Questions regarding the bid must be submitted via Public Purchase no later than 1:00 p.m. MT on August 17, 2026, with all answers provided to all prospective bidders by August 21, 2026, through official addenda or posted responses on the platform; no inquiries received after the cutoff date will be addressed, and communication via phone, email, or fax is not permitted. The solicitation number is 27-0674, and the bid documents, including specifications and plans, are available for download only to registered users on Public Purchase. The primary point of contact is Lenora Simpson, reachable at (307) 777-3558 or lenora.simpson1@wyo.gov, with further guidance on registration available through an official guide posted online. Bidders are responsible for monitoring the Public Purchase site regularly for updates, addenda, and clarifications throughout the bidding period.
Wyoming State Construction Department

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 238160
New
SLED
RFP 2026-10b Courthouse Attic Remediation and Roof RepairWalker County Government is seeking qualified contractors to perform comprehensive attic remediation and roof repair at the Walker County Courthouse located at 103 S Duke Street in LaFayette, Georgia. The scope of work includes addressing moisture intrusion and mold remediation, repairing structural and masonry deficiencies, replacing the entire roof system, and restoring damaged interior and exterior components. Contractors must provide all labor, materials, equipment, and supervision necessary to complete the project to specified standards, ensuring the long-term integrity and safety of the historic building. The solicitation requires detailed proposals demonstrating experience with similar public infrastructure projects and adherence to applicable building codes and environmental regulations. The request for proposal is identified as RFP 2026-10b with solicitation number PE-74600-NONST-2027-000000030, posted on July 24, 2026, and responses are due by August 25, 2026, at 7:00 PM. All proposals must be submitted through the official state procurement portal, with inquiries directed to Jon Pursley, the primary point of contact, via phone at 706-638-4048 or email at j.pursley@walkerga.us. The project is administered by the Walker County Board of Commissioners under the state of Georgia and is classified under a SLED government entity, with no set-aside provisions specified. Performance will occur exclusively at the courthouse location in LaFayette, Georgia.
Walker County Board of Commissioners

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 238160
New
Federal
Office Roof Replacement Deer Creek LakeThe contract for the Office Roof Replacement at Deer Creek Lake and Dam Office involves the complete removal of the existing Duro-Last roofing system and the installation of a new, fully warranted membrane roofing system that must meet a minimum 20-year warranty, be installed with quality craftsmanship, and be leak-free upon Government acceptance. Work is to be performed at 21897 Deer Creek Road, Mt. Sterling, Ohio, with a mandatory performance period of 60 calendar days beginning no later than 14 days after notice to proceed, targeting completion by October 16, 2026. The new system must include a minimum 60-mil thick white thermoplastic (PVC) membrane, R-30 insulation, and all components must conform strictly to manufacturer specifications with no used or recycled materials permitted. The Government retains full inspection and acceptance authority at the site, enforcing compliance with FAR 52.246-12, USACE EM 385-1-1 safety standards, and applicable federal, state, and local codes, with the contractor responsible for all corrections at no additional cost. This is a Firm-Fixed-Price contract awarded through a Total Small Business Set-Aside under NAICS code 238160, with the solicitation number W9123726QA064 and a response deadline of August 3, 2026. Offerors must be certified small businesses in SAM and maintain compliance with CMMC Level requirements, as failure to meet the CMMC standard renders them ineligible for award. Additional requirements include HSPD-12 security clearances for all personnel accessing federal facilities, mandatory Antiterrorism and Suspicious Activity Reporting training, E-Verify compliance, and adherence to Force Protection Conditions. Contractors must submit electronic proposals via the PIEE system in approved formats, and all invoicing must be conducted electronically through Wide Area WorkFlow per DFARS requirements. The Contracting Officer is Danielle Roar, and the Contract Specialist is Bradley Adkins, with the DoDAAC 9655AT assigned to the U.S. Army Corps of Engineers. No contract value is stated, and pricing details remain absent from the solicitation, though only one line item is listed covering all labor, materials, and disposal responsibilities. All attachments including the Statement of Work, Drawings, and Wage Determination are required for full compliance.
W072 Endist Huntington

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details
NAICS: 238160
New
Federal
Installation of roof sealantThe contract requires the coating and sealing of the entire roof of Building 6017 at USDA Moore Air Base in Edinburg, Texas, using a heavy-duty elastomeric reflective roof coating, along with the repair of all existing leaks that cannot be addressed by the coating alone. The roof measures approximately 115 feet in length by 75 feet in width, and all work must include power soft washing of the metal surface to ensure proper adhesion. The coating must be applied in two uniform coats, with the first coat specifically covering all seams and joints and allowed to cure for at least one hour before applying the second coat perpendicular to the first. Application is restricted to clear, sunny days with ambient temperatures between 55°F and 110°F, and must be performed using a 3/4” nap exterior paint roller or a professional airless sprayer. Contractors are obligated to attend a mandatory site visit to accurately measure and assess conditions, and must provide names of attendees to the designated point of contact. The project is issued as a Request for Quotations under solicitation number 12639526Q0209, with responses due by August 6, 2026, at noon CT, and is a Total Small Business Set-Aside under NAICS code 238160, with a size standard of $19 million in annual revenue. The estimated contract value ranges between $25,000 and $100,000. The award will be made using the Lowest Price Technically Acceptable (LPTA) method, evaluating quotes for technical acceptability and price reasonableness, with past performance reviewed subjectively based on reputation, adherence to schedules, and conformance to specifications. All work must commence within five calendar days of receiving the notice to proceed and be fully completed, including final cleanup, within 30 days of award. The contract incorporates numerous Federal Acquisition Regulation clauses including Prompt Payment, Construction Wage Rate Requirements, Material and Workmanship, Inspection of Construction, and Performance and Payment Bonds, and requires compliance with Buy American standards, trafficking in persons prohibitions, civil rights laws, and safeguarding requirements for information systems. A payment bond is mandatory, along with various additional security provisions, while a bid bond is not required. Contractors must be registered in SAM, provide Material Safety Data Sheets, maintain a satisfactory safety record, and ensure work is supervised by a qualified superintendent. Progress payments may be requested monthly and
Mrpbs Minneapolis Mn

POSTED

about 20 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → Navfacsyscom Mid-Atlantic

Same awarding agency

NAICS: 236220
New
Federal
Repairs to Building 3918 to Relocate USMC Post OfficeThis procurement is a total small business set-aside under NAICS code 236220 for repairs to Building 3918 at Marine Corps Air Station Cherry Point, North Carolina, to relocate the USMC Post Office, including the demolition of Building 153 and related incidental work. Only contractors listed on the General MACC contractor roster are eligible to submit proposals, and the solicitation is restricted to this group. The basis for award is lowest price, with the government evaluating total offer prices by combining the base requirement and all optional items, and applying cost adjustments for foreign materials under the Buy American statute if applicable. The work involves comprehensive renovation, including installation of loading dock equipment, relocation of food service equipment, building commissioning, electrical systems meeting NFPA 70 and NEMA 250 standards, and strict compliance with safety regulations including USACE EM 385-1-1, 29 CFR 1926.1101, and 40 CFR Part 61 and 763 for asbestos handling. All materials must be delivered in original manufacturer packaging, stored in clean, dry conditions, and must not be manufactured more than one year prior to delivery, with some items limited to six months. Piping systems require MIL-STD-101 color coding and precise labeling with specified lettering sizes, while steel studs must be marked with ICC number, manufacturer ID, steel thickness, coating designator, and yield strength. Asbestos sample results and certifications are documented in attached appendices, and all construction drawings including reflected ceiling plans, roof, elevations, door schedules, and equipment plans must be strictly followed. Offers must be submitted via SAM.gov by the deadline of July 30, 2026, with pre-proposal inquiries due by June 29, 2026. The contract requires use of NAVFAC’s eCMS for all technical submittals, with no email or paper submissions permitted unless explicitly allowed. Invoices must be submitted through WAWF with attachments under two megabytes, and each payment request must include a signed certificate from the QC Manager verifying compliance and current as-built drawings. Performance and payment bonds are required for bids exceeding $150,000, while payment bonds alone are required for bids between $35,000 and $150,000. Contractors must adhere to ADA requirements, prohibit disclosure of PII, CUI, or classified information
Commercial and Institutional Building Construction

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 236220
New
Federal
BUILDING REPAIRS, BUIILDING 530, DAM NECK ANNEXThe solicitation N4008526R0176, titled "BUILDING REPAIRS, BUILDING 530, DAM NECK ANNEX," is a small business set aside under NAICS code 236220 issued by Navfacsyscom Mid-Atlantic under the Department of Defense, with performance at NAS Oceana, Dam Neck Annex in Virginia Beach, Virginia. The contract is a task order under the indefinite delivery quantity contract N4008524D0030/0031/0032/0033/0034/0035/0036/0037/0038/0069, incorporating all its terms unless superseded. The scope includes comprehensive repairs to Building 530, involving removal of existing steam systems, installation of partial hot water and low-pressure steam piping, provision of boilers and pumps, domestic hot water systems, controls, and associated site work such as civil, mechanical and electrical utilities, exterior furnishings, landscaping, and irrigation. All work must comply with UFC 3-201-01, CSI Masterformat™, and specific safety standards including UFGS 01 35 26.05 20 and EM-385-1-1, with a mandatory 12-month warranty against defective workmanship and materials. Equipment and materials must have been in commercial use for at least two years prior to bid opening, and all installations must adhere strictly to manufacturer specifications, with “should” interpreted as “shall.” The contract requires strict adherence to construction documentation standards, including submission of six copies of shop drawings, certified welding records, as-built drawings, electronic source files, and comprehensive closeout submittals per UFGS 01 78 00. The solicitation mandates submission through the PIEE portal in PDF format, with proposals due by 2:00 PM EDT on June 15, 2026, and late submissions will not be considered. Offerors must provide a Standard Form 24 bid guarantee equal to 20% of the offer price or $3 million, whichever is less, and upon award, performance and payment bonds pursuant to FAR 52.228-15 are required within 15 days. The award will be made solely on the lowest price of CLIN 000
Commercial and Institutional Building Construction

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 237110
New
Federal
WWTP REPAIR CLARIFIER #2This solicitation, identified as N4008526R0174, is for the complete replacement of Clarifier #2 at the Northwest Wastewater Treatment Plant in Chesapeake, Virginia, and is restricted exclusively to Multiple Award Construction Contract (MACC) contractors primarily based in the Hampton Roads area of Virginia who hold one of the designated MACC contract numbers: N4008523D0043, D0044, D0045, D0046, D0047, or D0048. The project involves demolition of the existing clarifier structure, excavation, utility coordination, metal surface cleaning via SSPC-SP6 sandblasting with particle containment, and painting of blasted surfaces, all in accordance with NAVFAC Specification Work Order No. 1743738 (Attachment A) and associated drawings (Attachments B). The work must be performed within a 360-calendar-day period beginning at the time of task order award, which also serves as the notice to proceed. The solicitation is set aside as an 8a Competed procurement under NAICS code 237110 and is administered by NAVFAC Mid-Atlantic from Norfolk, Virginia, with the primary point of contact being Thomas Southern. All proposals must be submitted electronically via the PIEE Solicitation Module no later than June 23, 2026, at 1400 EDT, in PDF format under 1.9 GB per file, with an optional hard copy permitted within three calendar days thereafter. The evaluation and award will be based exclusively on price, with the contract going to the lowest-priced responsible offeror meeting all eligibility and technical requirements under FAR 16.505 fair opportunity procedures. The contract imposes stringent administrative, safety, environmental, and compliance obligations. Contractors must utilize NAVFAC’s electronic construction management system (eCMS) for all technical submittals, with paper or email submissions prohibited. Invoicing requires submission through Wide Area WorkFlow (WAWF) with extensive supporting documentation including NAVPAC Form 7300/30, Earned Value Reports, Monthly Work-hour Reports, Construction Progress Schedules, Contractor Safety Self-Evaluation Checklists, certified payrolls, and updated testing logs and submittal registers. Payment is governed by FAR 52.232-27 and FAR 52.232-
Water and Sewer Line and Related Structures Construction

POSTED

about 20 hours ago

DEADLINE

in 25 days
View Details
NAICS: 238220
New
Federal
Boiler Maintenance & RepairThis contract is for boiler maintenance and repair services at the Naval Submarine Base New London in Groton, Connecticut, under a Firm-Fixed-Price, Indefinite-Delivery, Indefinite-Quantity (FFP IDIQ) arrangement. The contract includes a one-year base period with four consecutive one-year option periods, spanning a potential total performance period from September 28, 2026, through September 27, 2031. A minimum guarantee is in place for the base period, and the total estimated contract value ranges from $544,900 to $2,741,900, based on the base and four option years' fixed pricing for unit-priced labor work subject to the Davis-Bacon Act. Work must be performed at the specified location, with all necessary labor, materials, equipment, supervision, and transportation provided by the contractor under an AS-IS condition assumption. The contract is issued under NAICS Code 238220, with a small business size standard of $19.0 million, and is unrestricted in competition. Offerors must be registered and active in the System for Award Management (SAM), and failure to maintain SAM registration renders them ineligible for award. Evaluation will follow the Lowest Price Technically Acceptable (LPTA) method, prioritizing price while requiring technically acceptable proposals across three factors: corporate experience, past performance, and price, listed in descending order of importance. Technical acceptability hinges on demonstrated experience with similar equipment, qualifications of key personnel and subcontractors, and documented performance history, where an “Unacceptable” rating in any factor results in disqualification. The contractor must comply with extensive performance standards outlined in annexes and attachments, including adherence to NFPA 704 for hazardous material labeling, corrosion prevention, and moisture control for boiler systems. The contractor must implement an Earned Value Management System compliant with EIA-748, maintain a system for contractor incident reporting and quality inspections, and ensure personnel have Personal Identity Verification (PIV) credentials. Invoicing must be processed through Wide Area WorkFlow (WAWF), with payments routed to N68732, and all labor costs must be adjusted to reflect updated Davis-Bacon wage determinations upon option exercise. Submission of proposals is electronic via email to the designated POC by September 3, 2026, at 4:00 PM EST, and must include the SF-1449,
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 237990
New
Federal
Design-Bid-Build, P1102 Weapons Magazine and Ordnance Operations Facility, Naval Submarine Base New London, Groton, ConnecticutThe contract solicitation N4008526R0004, issued by NAVFACSYSCOM Mid-Atlantic, seeks a contractor to design and construct the P-1102 Weapons Magazine and Ordnance Operations Facility at Naval Submarine Base New London in Groton, Connecticut. The project encompasses the construction of Type G and H weapons magazines, an ordnance operations building, a sentry building, associated site work, and demolition of existing structures, with a focus on electrical systems, grounding, bonding, and integration of secure infrastructure compliant with military and federal standards. Performance must comply with stringent security, safety, and environmental regulations, including adherence to MIL-STD-129, MIL-STD-1320, MIL-STD-1322, and MIL-STD-1323 for packaging and unit loads of hazardous materials; compliance with 49 CFR and DoD cybersecurity requirements as outlined in NIST SP 800-171; and strict adherence to explosive safety protocols under DESR 6055.09 and HERO standards. All personnel must be U.S. citizens, with pre-submission security verifications required, and key personnel—including the project superintendent, post-installed anchor installers, and special inspectors—must meet specific experience, training, and certification thresholds. The contract requires submission of detailed shop drawings, samples, certificates, as-built documentation, and O&M manuals through an electronic submittal register system, with inspections and final acceptance conducted on-site by government representatives. Invoicing must be submitted electronically via WAWF using NAVFAC Form 7300/30 with attachments not exceeding 2 MB. Corporate experience is a primary evaluation factor, requiring offerors to demonstrate past performance in projects of at least 3,000 square feet in building/structures, 1,500 linear feet of road construction, and comparable demolition work. Options for shutdowns, AV/FF&E, project management, and additional costs are included but are not binding; exercise requires consent of surety and additional bonding. Packaging and marking must meet exacting standards, including durable “EMPTY” labeling for containers, obliteration of prior hazardous material markings, and 2D barcoding in accordance with MIL-STD-129. No contract value or pricing data is disclosed, and the award methodology—whether LPTA or trade-off—is not specified. The response deadline is September 1,
Other Heavy and Civil Engineering Construction

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 334512
New
Federal
Market research for brand-name specifications for Direct Digital Controllers utilizing software for Configuration/Programming and for Connection to the EMCS located at various government installations located in the Hampton Roads area, VirginiaThe U.S. Navy’s Naval Facilities Engineering Systems Command, Mid-Atlantic is conducting market research to identify potential sources of Direct Digital Controllers compatible with established building automation software platforms—specifically Automated Logic Corporation’s WebCTRL and EIKON, Johnson Controls’ Metasys, and Siemens’ Desigo and Apogee systems—for use in HVAC control across multiple government installations in the Hampton Roads, Virginia area. These controllers must be capable of seamless integration with existing Energy Management Control Systems and must support Authority to Operate certification under Department of Defense cybersecurity directives. The research aims to justify the use of brand-name specifications under statutory authority for limited competition, based on the Government’s need to maintain uniformity, reduce operational complexity, leverage existing licensed software investments, and ensure cybersecurity compliance across a portfolio of projects spanning Fiscal Years 2026 to 2031. Responses must include detailed technical information on commercially available Direct Digital Controllers programmed using the specified software, including model numbers, applications, communication protocols, and manufacturer data sheets, along with documentation of at least one to three real-world installations where non-manufacturer controllers were successfully configured using the prescribed software platforms. Participants must provide company details and project-specific information such as customer contacts, narratives of work performed, and, if available, contract numbers and values. All submissions are due electronically by 2:00 p.m. EST on August 6, 2026, and must clearly mark proprietary information as such to ensure confidentiality; responses are strictly for market research purposes, with no obligation or promise of future procurement implied. Submissions are limited to electronic format, and late or incomplete responses will be rejected without consideration.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 236220
New
Federal
Multiple Location BEQ Chiller Loop Flushing and Chemical CleaningThis contract, identified by solicitation number N4008526R9049 and titled Multiple Location BEQ Chiller Loop Flushing and Chemical Cleaning, is a Total Small Business Set-Aside under FAR 19.5 and NAICS code 236220, reserved exclusively for small businesses. Only Mechanical MACC Contractors listed on the General Requirements cover page are eligible to submit proposals, and responses must be sent via email to the designated point of contact by the deadline of August 19, 2026. The work involves the heated chemical cleaning, flushing, and passivation of chilled water closed-loop systems serving Bachelor Enlisted Quarters at Marine Corps Base Camp Lejeune, North Carolina, requiring the removal of organic soil, hydrocarbons, flux, pipe mill varnish, pipe compounds, and iron oxide—excluding tightly adherent mill scale. The operation must be conducted without disrupting facility functions and requires adherence to UFGS 23 25 00 and Section 23 24 00 standards, along with Marine Corps Base Camp Lejeune administrative specifications. Execution phases include circulating a heated solution at 120°F for a minimum of 48 hours through the primary loop, followed by 48 hours through terminal units, a final fresh water flush until water clarity is perfectly clear, manual cleaning of all strainers and screens, and chemical passivation to prescribed parameters including sodium sulfite, sodium lauroly sarcosinate, and a system pH between 8.5 and 9.5. The contract incorporates comprehensive Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering material and workmanship, specifications and drawings, security requirements (Alternate II), prompt payment, payment procedures for fixed-price construction, progress payments, Wide Area WorkFlow payment instructions, Buy American requirements for construction materials, and modification proposals. Environmental compliance is strictly enforced, with contractors required to follow MCIEAST environmental policies and use approved forms for spill reporting, SAA inspections, and hazardous waste storage. Hazardous materials including asbestos and lead-based paint must be packaged and labeled according to federal regulations: asbestos requires double-wrapping in 6-mil plastic sealed with duct tape and proper manifesting, while lead-painted wood must be cut to under eight feet and wrapped in sealed 6-mil plastic. All hazardous waste must comply with 40 CFR 261, 262, and 263. Contractors must submit a
Commercial and Institutional Building Construction

POSTED

2 days ago

DEADLINE

in 25 days
View Details
NAICS: 334515
New
Federal
Determine the availability of Advanced Metering Infrastructure (AMI) electric meter devices with stated salient characteristics from responsible sources, NAVFAC MIDLANT AORThe Naval Facilities Engineering Systems Command, Mid-Atlantic, is conducting market research to assess the availability of Advanced Metering Infrastructure electric meter devices compatible with either Schneider Electric’s EcoStruxure Power Monitoring Expert software or Electro Industries/GaugeTech’s CommPQA software. These meters must be capable of measuring and transmitting electrical data, connecting to existing AMI systems across NAVFAC MIDLANT installations in Maine, Rhode Island, Connecticut, New Jersey, Pennsylvania, Indiana, Illinois, and Virginia, and obtaining and maintaining Department of Defense Authority to Operate certification under DODI 8500.01 and DODI 8510.01. The government is evaluating whether alternative products can meet its needs or if exclusivity to Schneider or EIG devices remains necessary, based on the current use of ION 8600, ION 8650, ION 9200, Shark 250, and Shark 270 meters across its installations. The intent is to support future Class Justifications and Approvals from FY2026 to FY2031 that may justify limited competition under 10 U.S.C. 3204(a)(1) due to the necessity of integrating with established software ecosystems, ensuring cybersecurity, and minimizing operational complexity for maintenance personnel. Interested parties must respond with company details, a list of commercially available meters that work with the specified Schneider or EIG software platforms including model numbers, product descriptions, applications, communication protocols, and technical documentation, along with up to three examples of successful field installations where non-Schneider or non-EIG meters were configured using these software tools. Each project submission must include point of contact information, a narrative description, and any available contract details. All responses must be submitted electronically to Holly Manning by 2:00 p.m. EST on August 6, 2026; no hardcopy or fax submissions will be accepted. This notice is strictly for market research and does not constitute a solicitation, commitment, or guarantee of future procurement. The government will not reimburse response costs or provide debriefings, and all proprietary information submitted will remain confidential within government channels.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

2 days ago

DEADLINE

in 12 days
View Details