Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Buy Process Documentation & Supply Chain Transparency

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the creation of comprehensive buy process documentation for the Selector, Receiver Signal component, focusing on mapping the entire supply chain. The scope includes compiling detailed supplier lists, outlining material sourcing strategies, establishing quality control measures, and documenting assembly procedures to ensure the process can be efficiently replicated in the future. This effort aims to enhance transparency and provide a robust framework for managing the component's procurement and production lifecycle. The subcontract falls under NAICS code 334511 and is managed by the Department of Defense through the Pa DLA Aviation office located in Philadelphia. The work is to be performed in Sparks, Nevada, with the specific aim of supporting supply chain visibility and process standardization. By consolidating and formalizing these critical processes, the contract supports operational consistency and future scalability for the component's sourcing and assembly.

General Info

Create buy process documentation for Selector Receiver Signal component, enhancing supply chain transparency.

Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

Sparks, NV, 89434, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA126CUA06.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SELECTOR, RECEIVER S

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMar 19

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Creation of detailed buy process documentation mapping the supply chain for the Selector, Receiver Signal component, including supplier lists, material sourcing, quality controls, and assembly procedures to support future replication.

Similar Contracts

Same NAICS industry code

Hyperspectral Sensor Component Supply

POSTED

about 3 hours ago

DEADLINE

Request for Information (RFI) – Modular Tactical Signals Intelligence (SIGINT) EW System

Solicitation # FA8629-27-R-5005

The United States Air Force Life Cycle Management Center, specifically the Special Warfare Program Office, is conducting market research through a Sources Sought Synopsis and Request for Information under solicitation FA8629-27-R-5005. The government is seeking to identify capable sources for a body-worn, modular tactical Signals Intelligence and Electronic Warfare system characterized by low size, weight, and power. The system must support full spectrum signals prosecution in adverse environments, including the ability to detect, identify, and direction-find threat signals while stationary or on the move. Key technical requirements include interoperability with Android S20TE and S23TE devices, connectivity via mesh networks, and electronic warfare attack capabilities with tunable output power. Objective goals include Mil-STD-810G compliance, operation between -30C and +55C, and support for advanced jamming techniques such as predictive and reactive hop-set jamming. This RFI is for informational purposes only and does not constitute a formal solicitation or a commitment to procure items. Interested respondents must submit a maximum 15-page response by 12:00 PM Eastern time on November 18, 2026. Submissions must include company identification, socioeconomic status, technical capabilities, and a rough order of magnitude cost estimate. The government also requires information regarding the ability to deliver two units within six months of an order and confirmation of compliance with the Buy American Act or Berry Amendment. Additionally, respondents must address compliance with FAR 52.219-14 regarding limitations on subcontracting and FAR 52.219-33 regarding the Non-Manufacturer Rule if the requirement is set aside for small businesses.

FA8629 Aflcmc Wisk Sof/pr

POSTED

about 3 hours ago

DEADLINE

Solicitation # N0010426QNF10

Solicitation N0010426QNF10, issued by the Department of the Navy's NAVSUP Weapon Systems Support Mech, is a total small business set-aside request for quotations for the manufacture of Rotor Torpedoes (NSN 1355-01-561-1348). The scope includes the production of hardware according to Technical Data Package version 009 and specific quality requirements. The government has included an option to increase the order quantity by up to 100 percent. Delivery is required within 405 days on a FOB Destination basis. Award will be granted to the responsible offeror providing the lowest priced technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System to assess item, price, and supplier risk. The contract mandates strict adherence to several military standards, including MIL-STD-129 for marking, MIL-STD-973 for configuration management, and MIL-STD-2073-1 for preservation and packaging. A critical requirement is that all materials must be mercury-free to prevent corrosion and toxicity on submarines and surface ships. Quality systems must comply with ISO 9001, and each unit must be serialized through the Commander Naval Undersea Warfare Center. Administrative requirements include the use of Wide Area Workflow for invoicing and payment, and compliance with DFARS cybersecurity and Buy American regulations.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in about 1 month

COMPUTER,FUEL MANAG

Solicitation # N0038327QAA08

Solicitation NO0383-27-Q-AA08, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside for the teardown, evaluation, repair, overhaul, and modification of Fuel Management Computers (NSN 6610-01-523-8319, P/N 512010-03-01). The primary objective is to return these units to a Ready for Issue (RFI) condition. A critical technical requirement includes the mandatory replacement of all seven transorbs on the internal Fuel Interface Card (PN512023-04-01) as part of standard repair procedures. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids. Specific prohibitions include the use of MIL-W-81381 wire, which must be replaced by SAE-AS22759 series wire. The contract mandates strict adherence to quality and technical standards, including ISO 9001/SAE AS9100 for quality management and ANSI/NCSL Z540.3 or ISO-10012-1 for calibration. Performance is subject to government inspection and acceptance at the origin, with a required delivery timeframe of 90 days FOB Destination. The award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additional administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and compliance with MIL-STD-2073-1 for packaging and MIL-STD-129 for marking.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

Binocular Night Vision Device

Solicitation # 202603695

The Royal Canadian Mounted Police is establishing a National Individual Standing Offer for the supply and delivery of Binocular Night Vision Goggle systems and adjustable iris units to enhance member safety. The requirement includes Generation 2+ and Generation 3 White Phosphorous goggles, as well as adjustable iris units, with initial quantities of 25, 75, and 200 units respectively. The standing offer is valid for two years from the date of issuance, with the possibility of two additional one-year extensions. All goods must be delivered Duty Paid to the RCMP National Warehouse in Ottawa, Ontario, within 60 calendar days of receiving a call-up. Selection is based on the lowest compliant bid following a three-phase evaluation process involving visual, operational, and measurement assessments of samples. Technical requirements include compliance with MIL-STD-810H for drop tests, IEC 60825-1 for laser safety, and specific marking requirements such as permanently affixed metal nameplates with laser-engraved serial numbers and ITAR designations. The contract mandates the use of reusable, returnable, or recyclable packaging in accordance with the Policy on Green Procurement. Suppliers must also provide certifications regarding the absence of forced labour, independent offer determination to prevent collusion, and adherence to the procurement Code of Conduct.

Royal Canadian Mounted Police

POSTED

about 10 hours ago

DEADLINE

Manufacturing of Optoelectronic Displays (NSN 5980-20-001-5173)This subcontract involves the manufacture of 18 optoelectronic displays under NSN 5980-20-001-5173 for the DLA Weapons Support Active Devices Division. The selected contractor is responsible for fabricating the units according to specific technical drawings, performing Product Verification Tests, and ensuring all construction is mercury-free. Final deliverables must include all relevant material certifications and process operation sheets. The project is categorized under NAICS code 334511 and will be performed in New Cumberland. Strict adherence to security and data protection standards is required, specifically compliance with DFARS 252.204-7012 and NIST SP 800-171. The response deadline for this opportunity is November 11, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Display Units (NSN 7025-01-676-1273)This subcontract involves the manufacture or procurement of two specialized display units matching NSN 7025016761273 for prime contractors supporting the Department of Defense. The selected provider must ensure all units are packaged according to MIL-STD-2073-1E and RP001 standards, with markings applied per MIL-STD-129. Delivery must be executed via the fastest traceable shipping method to the designated place of performance in FPO 96616. To be eligible for this requirement, contractors must maintain a valid CAGE code and current SAM validation. The project falls under NAICS code 334511 and is managed through the Defense Logistics Agency. Interested parties must submit their responses by the deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 22 hours ago

DEADLINE

Supply of Fire Detector Sensing ElementsThis subcontract involves the procurement and delivery of four commercial off-the-shelf sensing elements for aviation fire detector systems. These components, specifically Meggitt Safety Systems Inc part number 3001-176-1050/500-18 with NSN 6340-01-322-8526, are intended for prime contractors supporting the Department of Defense through the DLA Weapons Support Aviation Supply Chain. All deliverables must strictly adhere to the DLA Master List technical and quality requirements, as well as physical identification requirement RQ017. The project falls under NAICS code 334511, with a response deadline set for November 4, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Supply of Reconnaissance System Camera Control UnitsThis subcontract involves the procurement and delivery of two reconnaissance system camera control units, specifically HurleyIR part number RP-M1R3-PCM, for prime contractors working on DLA Troop Support projects. The items must be packaged according to ASTM D3951 and labeled in accordance with MIL-STD-129. Delivery is required FOB Origin to the DLA Distribution DDSP located in New Cumberland, Pennsylvania. To be eligible, the provider must maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act. The opportunity falls under NAICS code 334511 and is managed under the Department of Defense. Interested parties must respond by November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 22 hours ago

DEADLINE

Radar Set Support Component Supply (P/N SRC3980A)This subcontract involves the manufacture or procurement of one radar set support component, part number SRC3980A, for prime contractors supporting the DLA Weapons Support ASC. The supplier must ensure the unit is produced in strict accordance with RA001 technical and quality requirements and maintains full compliance with the Buy American Act as specified in DFARS 252.225-7001. Managed by the Department of Defense under NAICS code 334511, the contract is overseen by the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-7074

Solicitation SPE4A6-27-T-7074 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of one Channel Filter, identified by NSN 5895-01-610-6177 and Northrop Grumman Systems Corporation part number 16-204164-5. The item is designated as a critical application item. Delivery is required by October 15, 2027, with a delivery window of 344 days after order. The contract is established as FOB Origin, with the destination for inspection and acceptance located at DLA Dist San Joaquin in Tracy, California. The contractor must adhere to strict quality and technical standards, including SAE AS9003 or ISO 9001 compliance for inspection systems and zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Key requirements include CMMC Level 2 self-assessment, supply chain traceability documentation per DLA Directive C03, and packaging in accordance with MIL-STD-2073-1E and RP001. While item unique identification is not required, the contractor must comply with MIL-STD-129 for marking and provide hazard warning labels and Material Safety Data Sheets for any hazardous materials. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-0979

Solicitation SPE7M1-27-T-0979 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Chem Cassettes, specifically NSN 6665015436452, part number 700347 from Honeywell Analytics Distribution. The requirement consists of two line items for one unit each, with a delivery timeframe of 20 days after order. The items are designated as critical application items and are subject to strict storage and handling requirements, including a non-extendable three-month shelf life and mandatory refrigeration. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with specific requirements for hazardous materials shipping under IP025 and 29 CFR 1910. Delivery is FOB Origin with inspection and acceptance occurring at the destination in Eastover, South Carolina. Shipping must be conducted via the fastest traceable means, and the use of parcel post is explicitly prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic material sourcing, and the safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

SHAFT,SHOULDERED

Solicitation # SPRPA127QRA31

Solicitation SPRPA1-27-Q-RA31 is issued by DLA Aviation at Philadelphia for the procurement of three shouldered shafts under NSN 3040-01-085-6720. This request is issued under Emergency Acquisition Flexibilities and requires delivery within 365 days on a FOB Destination basis. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Offerors must be government-approved sources of supply; distributors must provide an authorized distributor letter on the source's letterhead at the time of proposal submission. Quotations are due by November 12, 2026. The contract mandates strict adherence to quality and packaging standards, including ISO 9000 or equivalent and MIL-STD-2073 for preservation and MIL-STD-129 for marking. Inspection and acceptance will occur at the origin. Key administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American and Balance of Payments Program. Additionally, the contractor must adhere to cybersecurity reporting under DFARS 252.204-7012 and provide item unique identification reporting. A one-year warranty from the date of delivery is required for these supplies.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPRPA126RUC24

Solicitation SPRPA1-26-R-UC24 is a request for proposal issued by DLA Aviation at Philadelphia for the procurement of APS Pallets, identified by NSN 1680-01-633-8682. This unrestricted procurement requires the delivery of newly manufactured spares, as refurbished or repaired materials are strictly prohibited. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. Past performance will be evaluated using the DoD Supplier Performance Risk System (SPRS) color rating scale. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 and MIL-STD-129, with additional requirements for wood packaging materials to comply with ISPM 15. Inspection and acceptance will occur at the origin, and the contractor must maintain a recognized quality management system such as ISO 9001 or SAE AS9100. Deliveries are designated as FOB Origin. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with DFARS cybersecurity and Buy American regulations.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 3 hours

NRP,HANDSET ASSEMBL

Solicitation # SPRPA127QYA05

Solicitation SPRPA1-27-Q-YA05 is a fixed-price request for a new spares requirement for one Handset Assembly, identified by NSN 4920-01-607-6892. Issued by DLA Aviation at Philadelphia under Emergency Acquisition Flexibilities, the procurement requires delivery within 90 days, with inspection and acceptance occurring at the origin. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Offerors quoting as distributors must provide an unredacted OEM Distributor Letter at the time of proposal submission to be considered responsive. The contract mandates strict adherence to quality and packaging standards, including ISO 9001 requirements and MIL-STD-2073 for preservation. Specific packaging levels are defined for CONUS and OCONUS shipments, with additional requirements for electrostatic discharge sensitive items and hazardous materials, including the submission of Safety Data Sheets. Payment and receiving reports must be processed through the Wide Area Workflow system. Key regulatory compliance includes the Buy American program, NIST SP 800-171 cybersecurity standards, and DFARS clauses regarding Critical Safety Items and Contractor Business Systems.

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Solicitation # SPRPA127QYA45

Solicitation SPRPA1-27-Q-YA45 is a request for quotation issued by DLA Aviation at Philadelphia for the procurement of one non-critical valve assembly, NSN 4810-01-730-4235. The acquisition is conducted under Emergency Acquisition Flexibilities (EAF) authority and falls under NAICS code 332919. Delivery is required within 90 days, FOB Destination, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The government requires the contractor to maintain a quality management system compliant with ISO 9000 or an equivalent standard, with inspection and acceptance occurring at the origin. Award will be based on a trade-off where past performance is considered more important than price. The government will utilize the DoD Supplier Performance Risk System (SPRS) to evaluate supplier, item, and price risks. Offerors must be government-approved sources of supply; distributors must provide an authorized distributor letter on the source's letterhead via email to the point of contact, Kaileigh Blaker, at the time of proposal submission. The contract includes a one-year warranty from the date of delivery and requires the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Solicitation # SPRPA127QYA43

Solicitation SPRPA127QYA43 is a request for quotations issued by the DLA Aviation office in Philadelphia for the procurement of one power supply, identified by NSN 6120-01-528-7505. The government intends to make a single award based on a best-value determination, where past performance is considered the primary factor and is more important than price. Evaluation of past performance will utilize the DoD Supplier Performance Risk System to assess item, price, and supplier risk. The required delivery timeline is 90 days, with terms set as FOB Destination. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073, MIL-STD-129, and MIL-STD-130 for unique item identification. Inspection and acceptance will occur at the origin. Compliance requirements include the Buy American Act, NIST SP 800-171 for cybersecurity, and DFARS regulations regarding the safeguarding of covered defense information. Invoicing must be processed through Wide Area WorkFlow, and any product variances must be approved via a Request for Variance prior to delivery.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

VANE,COMPRESSOR,AIR

Solicitation # SPRPA127QXA20

Solicitation SPRPA1-27-Q-XA20 is a fixed-price request for the procurement of 114 units of air compressor vanes (NSN 0RH 2840-01-714-1060) for the Defense Logistics Agency (DLA) Aviation office in Philadelphia. The items are designated as critical safety items, requiring the contractor to maintain ISO 9001 or higher quality certification. Inspection and acceptance will occur at the origin. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will include SPRS risk assessments regarding item, price, and supplier risk, and offerors must provide relevant past performance data to remain eligible for award. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1 and MIL-STD-129, with unique item identification required per MIL-STD-130. All shipments must comply with ISPM 15 wood packaging regulations. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Key regulatory requirements include the Buy American Act, the Trade Agreements Act, and DFARS cybersecurity standards for safeguarding covered defense information. The response deadline for this solicitation is November 9, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

RECOVERY SEQUENCER,

Solicitation # SPRPA127QYA44

Solicitation SPRPA1-27-Q-YA44 is issued by the DLA Aviation office in Philadelphia under Emergency Acquisition Flexibilities for the overhaul, upgrade, repair, testing, and inspection of one Recovery Sequencer, identified by NSN 1680-99-753-8672 and Part Number MBEU241040. The contractor, identified as Martin-Baker Aircraft Company Limited in the United Kingdom, is responsible for providing all necessary facilities, labor, materials, and tooling to return the item to a Ready For Issue condition in accordance with the latest technical publications. The scope includes strict adherence to configuration management, quality systems meeting ISO 9001/SAE AS9100 standards, and specific protocols for handling items that are Beyond Economical Repair or Missing on Induction. The government intends to make a single award based on a trade-off between price and past performance, with past performance weighted as more important. Deliveries are required within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the origin using the contractor's equipment. Packaging must comply with MIL-STD-2073 and marking must follow MIL-STD-129, including specific DLR labeling requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with Buy American and specialty metals restrictions. All repairs must be performed at the identified facility in the United Kingdom, and any deviations from approved procedures require formal government acceptance.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Supplier of Antenna (NSN 5985-01-566-5173)This subcontract, issued by the Department of Defense through DLA Aviation At Philadelphia, seeks a supplier to provide one Antenna (NSN 5985-01-566-5173) for prime contractors working on DLA/NAVSUP WSS projects. The selected provider is responsible for the manufacture or sourcing of the component, ensuring all packaging adheres to MIL-STD-2073 standards and that Higher-Level Contract Quality Requirements are strictly implemented. To qualify, the supplier must hold ISO 9001 or SAE AS9100 certification and utilize test equipment calibrated to ISO 10012 or NCSL Z540.3 standards. Final delivery must include the antenna along with all necessary quality and calibration documentation. The response deadline for this opportunity is November 6, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Supply of PGMC LRM for AircraftThis subcontract, issued by the Department of Defense through the Pa DLA Aviation At Philadelphia, requires the procurement and delivery of two units of NSN 1680-01-581-7851, identified as PGMC Line Replaceable Modules for aircraft. The contractor is responsible for supporting prime contractors delivering DLA supply contracts and must ensure all items are packaged in strict accordance with MIL-STD-2073. The agreement mandates a delivery timeline of 90 days for the specified units. Additionally, the contractor must provide certification of the country of origin to ensure full compliance with the Buy American and Trade Agreements Act. The opportunity is categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Embedded Subassembly/Component SupplierThis subcontract opportunity with the Department of Defense, specifically through the Pa DLA Aviation At Philadelphia, seeks a supplier for high-reliability electronic components and embedded subassemblies. The scope of work involves providing defense-grade semiconductors, capacitors, and integrated circuits to prime contractors on DLA supply contracts. The selected provider must deliver component kits or subassemblies while ensuring strict adherence to quality standards through full serialization, lot numbers, and batch numbers. A critical requirement of the contract is the maintenance of comprehensive traceability and the provision of Unique Identification for embedded subassemblies as required. Operating under NAICS code 334413, the contract was posted on October 27, 2026, with a response deadline of November 6, 2026.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Circuit Card Assembly (NSN 5998-01-728-8235) SupplierThis subcontract involves the manufacture or procurement of five Circuit Card Assemblies matching NSN 5998-01-728-8235 for prime contractors supporting DLA supply contracts. The supplier must ensure all assemblies are provided with Unique Item Identifiers and adhere to MIL-STD-2073 packaging standards. Final delivery requires the submission of Material Inspection and Receiving Reports. To qualify, the supplier must hold ISO 9001 or SAE AS9100 certification and maintain strict compliance with DFARS 252.209-7010 regarding Critical Safety Items. The opportunity is managed under NAICS code 334418 for the Department of Defense via the Pa DLA Aviation At Philadelphia agency, with a response deadline of November 6, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Supply of AUX RACK MAINFRAME (NSN 1680-01-561-2309)

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

Avionics and Radar System Integration

Naval Air Systems Command

POSTED

DEADLINE

TRANSMITTER, PRESSUR

Solicitation # SPE4A6-26-T-994M

ASC COMMODITIES DIVISION

POSTED

CLOSED

RESUSCITATOR, HAND O

Solicitation # SPE2DS-26-T-7292

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

Solicitation # SPE4A6-26-T-997G

ASC COMMODITIES DIVISION

POSTED

CLOSED

Solicitation # SPE2DS-26-T-7034

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

HOUSING, BEARING, SPE

Solicitation # SPE4A5-26-T-011K

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

PAD, ELECTRODE, DEFIB

Solicitation # SPE2DS-26-T-7288

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

CALIBRATOR, COMPONEN

Solicitation # SPE4A6-26-T-994L

ASC COMMODITIES DIVISION

POSTED

CLOSED

TUBE, GAS SAMPLING, V

Solicitation # SPE2DS-26-T-7290

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

F-16 Heads Up Display

Solicitation # SPRHA4-26-Q-0326

Ut DLA Aviation At Ogden

POSTED

CLOSED

RADAR SET SUBASSEMB

Solicitation # SPRPA126QRA19

Pa DLA Aviation At Philadelphia

POSTED

CLOSED

58--OPTICAL SUBASSEMBLY

Solicitation # SPE4A726T115M

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS