Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Cabinet Assembly Fabrication

Active

Federal

Response Deadline08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Cabinet Assembly Fabrication pertains to the manufacture and delivery of a custom cabinet assembly identified by part number 333333, to be produced in full compliance with specification 444444. The work requires precise fabrication with specific attention to preservation methods and traceability marking to ensure quality control and lineage throughout the supply chain. This is a subcontract awarded under the NAICS code 337127, indicating classification within the manufacturing of wood kitchen and bathroom cabinets. The opportunity was posted on July 31, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM. Performance will be conducted under the oversight of the Navsup Flt Logistics Ctr Puget Sound, a unit within the Department of Defense, though no specific place of performance or point of contact details are provided. The contract is not designated under any specific set-aside category and is accessible through the SAM.gov platform for interested subcontractors.

General Info

Fabricate and deliver custom cabinet part 333333 per spec 444444 under DoD oversight by August 12, 2026.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget SoundView Agency

NAICS

337127 - Institutional Furniture ManufacturingView NAICS

Place of Performance

WA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of a custom cabinet assembly (part no. 333333) per specification 444444, including preservation and traceability marking.

Similar Contracts

Same NAICS industry code

Laboratory Workstations and Casework at Fort Detrick, Maryland

Solicitation # 1232SA26Q1164

The U.S. Department of Agriculture, Agricultural Research Service, is soliciting quotations for Laboratory Workstations and Casework at Fort Detrick, Maryland, under solicitation number 1232SA26Q1164. This request is issued as a combined synopsis and solicitation in accordance with FAR Part 12, and no separate written solicitation will be provided. The acquisition is a total small business set-aside under NAICS code 337127 for Institutional Furniture Manufacturing, with the small business size standard set at 500 employees. All responsible small business concerns are encouraged to submit quotations, which must be received by 10:00 PM Eastern Time on August 21, 2026. A mandatory site visit is scheduled for August 10, 2026, from 10:00 AM to 11:00 AM local time at 1301 Crops Way, Frederick, MD, with no exceptions for early or late visits. All visitors must report to the Fort Detrick Visitor Center, undergo security vetting, and be escorted by government personnel throughout the visit; visitors are advised to allow 30 to 45 minutes for entry procedures. The primary point of contact for the solicitation is Kerrie Hodges, reachable at kerrie.hodges@usda.gov. The contract will be performed in Frederick, Maryland, with the issuing office located in Beltsville, Maryland.

USDA Ars Afm Apd

POSTED

DEADLINE

Workspaces - Office Furniture

Solicitation # J095428

Statistics Canada is soliciting proposals for the purchase, delivery, and installation of office furniture at 170 Tunney’s Pasture in Ottawa, under Solicitation Number J095428. The requirement includes 31 units of interconnecting panel systems from Haworth, 17 height-adjustable work surfaces, two personal storage towers, and ten storage lockers, with detailed specifications provided in Appendix 1 to Annex A of the Furniture Builder. This procurement is exclusively open to suppliers holding the PWGSC Supply Arrangement E60PQ-140003/PQ/D and is set aside under the federal government’s Procurement Strategy for Indigenous Business, exempting it from international trade agreements including the Canadian Free Trade Agreement as per Article 800. Responses must be submitted by September 4, 2026, with the notice issued on July 31, 2026, and the contracting authority is Abbas Khokhar, reachable at abbas.khokhar@statscan.gc.ca.

Statistics Canada (StatCan)

POSTED

DEADLINE

in about 1 month

Workspaces - Office Furniture

Solicitation # J095124/A

This procurement solicitation, identified as J095124A, is issued under PWGSC Supply Arrangement E60PQ-140003/D and seeks the purchase, delivery, and installation of office furniture for Statistics Canada at 170 Tunney’s Pasture Drive in Ottawa, Ontario, with all goods required to be delivered by October 31, 2026. The requirement spans three product categories under the Supply Arrangement: Custom Layout Interconnecting Panel Systems comprising 10 clusters or 60 workstations, height-adjustable and fixed-height work surfaces totaling 60 units, and pedestals and storage lockers totaling 60 and 45 units respectively. Delivery must be completed under DDP Incoterms 2020至指定地点，安装时间待定。投标必须通过供应商资格名单中的通用通道进行，但如果至少两家原住民企业提交报价，则该采购将依据原住民商业采购策略（PSIB）进行预留，仅评估提交的原住民企业报价，且供应商必须提供符合供应手册附录9.4界定的原住民企业认证及相关所有者声明。所有投标必须通过CPC Connect电子系统提交，截止日期为2026年8月14日，且必须包含技术建议书和详细的财务提案，涵盖所有物品、数量、单价、安装与交付费用，以及税务明细。技术合规性为硬性门槛，任何未能满足强制性要求的提案将被直接视为不合规，合同将授予满足所有强制性标准且报价最低的投标者。评估按类别进行，同一供应商若在多个类别中标，加拿大政府可合并签发单一合同。所有产品必须为新品，符合最新图纸和规格，投标方需提交每类产品的数字样品以供合规验证。包装需符合环境优先标准，大部分材料必须可重复使用、可退回或可回收，包装带除外。发票需按交付进度提交至financecounter@statcan.gc.ca，并包含完整行政与财务信息，包括合同编号、客户参考号、采购业务号、财务代码、税收明细和运输详情。供应商必须维持符合加拿大审计要求的会计系统，记录需保存至最终支付后七年或所有索赔结清后孰晚。供应商有义务遵守反强迫劳动法律，包括《刑法》第279.01和279.011条以及《移民

Statistics Canada (StatCan)

POSTED

DEADLINE

Foundation Hall furniture

Solicitation # SRC-WSU-2027-000627-RFP

Minnesota State Colleges and Universities System is seeking qualified vendors to supply and install residence hall furniture for Foundation Hall under solicitation MnSCU-SRC-WSU-2027-000627-RFP, which was posted on July 31, 2026, with proposals due by September 3, 2026. The project falls under NAICS code 337127, specifically for institutional furniture manufacturing, and is open to all eligible bidders without a set-aside designation. The furniture must meet the specifications required for student housing, including durability, safety, and functionality, with installation to be completed on-site at the designated location. All submissions must be directed through the online procurement portal, and inquiries should be directed to Beth Comero at beth.comero@winona.edu as the primary point of contact. Vendors are expected to demonstrate experience in similar institutional projects and provide detailed proposals outlining their product offerings, installation plans, timelines, and compliance with all contractual requirements.

Minnesota State Colleges and Universities System

POSTED

DEADLINE

in about 1 month

Real-Time Intelligence Center/TIAC Modular Workstations and Conference Area (turnkey)

Solicitation # 2026-Q-PD-046-WR

The City of Cape Coral is soliciting turnkey solutions for the design, delivery, and installation of modular workstations and a conference area to support the Real Time Crime Center and TIAC operations. These workstations are engineered to accommodate extended shift work by prioritizing ergonomics, including adjustable desks and specialized console furniture that reduce physical fatigue and prevent repetitive strain injuries, ensuring analysts can maintain peak performance during high-stress, continuous public safety missions. The furnishings must integrate seamlessly with multiple monitors, communication systems, and advanced technology tools while enhancing workspace organization and team collaboration. The vendor is responsible for all aspects of the project including custom tuning, delivery, installation, ongoing support, and comprehensive warranty coverage, ensuring the equipment functions reliably under demanding 24/7 operational conditions. The solicitation, numbered 2026-Q-PD-046-WR, was posted on July 30, 2026, with responses due by August 11, 2026, and is managed by the Cape Coral Police Department under the state of Florida. The work will take place within the city’s jurisdiction, with all equipment and installations required to meet the specific operational needs of the center. Primary point of contact is Business Manager Tammy Gair, with Procurement Specialist Milagros Rosario serving as secondary contact, both reachable via email and phone provided in the public notice. This procurement reflects the city’s commitment to modernizing its public safety infrastructure by investing in workforce wellness and technological readiness to support mission-critical real-time intelligence operations.

Police Department

POSTED

DEADLINE

EF944-270442 - PSIB - Purchase of office furniture under the SA for category 6 for ESDC

Solicitation # WS5799420242

Public Works and Government Services Canada, acting on behalf of Employment and Social Development Canada, is soliciting bids for the purchase, delivery, and installation of office furniture under supply arrangement E60PQ-140003/D in Montreal, Quebec. The solicitation, identified as EF944-270442 and listed under solicitation number WS5799420242, targets suppliers offering furniture in compliance with the category 6 standards and is open to all eligible bidders without specific set-aside provisions. The request is issued under NAICS code 337127 for office furniture manufacturing and is part of a federal procurement initiative managed by the Government of Canada. Bids must be submitted by August 4, 2026, at 7:00 p.m. Eastern Time, following the detailed requirements outlined in the bid solicitation document. The primary point of contact for inquiries is Corine Lavoie, Contracting Authority, reachable via email at corine.lavoie@tpsgc-pwgsc.gc.ca, and all information related to the tender can be accessed through the CanadaBuys portal.

Department of Public Works and Government Services

POSTED

DEADLINE

NFS(Pacific) Seating

Solicitation # W0103-19103199

This procurement under Solicitation Number W0103-19103199 is issued under Supply Arrangement E60PQ-120001/H for rotary chairs and rotary stools to be delivered and installed at CFB Esquimalt in Victoria, British Columbia, with a mandatory delivery deadline of October 31, 2026. Only pre-qualified suppliers holding the existing Supply Arrangement are eligible to bid directly; non-SA holders may submit bids but must simultaneously apply for the Supply Arrangement, with no contract award possible until that arrangement is formally granted, and Canada is under no obligation to delay award pending such evaluation. The requirement is for office seating including student chairs and tables, teacher desks and chairs, filing cabinets, storage cabinets, bookshelves, and whiteboards, with all deliveries governed by DDP Incoterms 2020 to the Naden Building NAD092, meaning the contractor bears all costs and risks up to and including unloading at the destination. Evaluation follows a Lowest Price Technically Acceptable methodology, where offers must first meet all mandatory technical criteria—including compliance with ANSI/BIFMA e3 Level 2 standards, use of recyclable plastics, and Canadian content certification—and the lowest-priced compliant offer will be selected without trade-offs between price and technical merit. Packaging must adhere to ISO 21067-1:2016 and Canadian environmental policies, requiring reusable, returnable, or recyclable materials with exceptions only for packaging tape and specialized safety packaging, and all shipments must include a detailed packing slip with contract and purchase identifiers. The contract period extends to October 31, 2027, with an option for the Government to acquire additional items at the same pricing within 12 months of award. All offers must include signed certifications confirming product conformance, environmental compliance, absence of forced labor, adherence to international sanctions, and truthful representations. The contracting authority is Ila Jordan, with no security clearance required and no key personnel specifications. Invoices must reference the CRN and PBN, supported by financial records retained for seven years, and must be submitted electronically to the designated email without reliance on standardized invoicing platforms. Proposal submissions must be separated into technical and financial components, submitted via email by the August 7, 2026 deadline, and must not violate procurement integrity through affiliated bidding or misleading declarations.

Department of National Defence

POSTED

DEADLINE

Training Group Work Area Solution – Furniture and Equipment SupplyThe contract is for the supply of modular work area furniture and equipment tailored for training environments, encompassing desks, seating, partitions, and storage units designed to support functional and flexible learning spaces. This subcontract, issued under the Department of Defense through the Defense Logistics Agency, falls under the NAICS code 337127 for office furniture manufacturing and is intended to equip facilities used for military and defense training purposes. The work must be performed in accordance with specifications that ensure durability, ergonomics, and adaptability to dynamic operational needs, with all delivered items meeting federal standards for quality and safety. The solicitation was posted on July 29, 2026, and the award is linked to the contract number SPE8EZ21D0013 with delivery term SPE8EJ26F057J. While specific location details for performance or delivery are not provided, the equipment will serve defense training sites nationwide, requiring scalable and standardized solutions that can be rapidly deployed across multiple venues. The contract supports broader DLA efforts to modernize and standardize training infrastructure, ensuring that personnel have access to consistent, high-performance workspaces that enhance learning and readiness outcomes.

Defense Logistics Agency

POSTED

DEADLINE

Optical Laser and BSL-2 Laboratory Casework InstallationThe contract entails the supply and installation of specialized laboratory casework, fume hoods, biosafety cabinets, and optical table supports designed to meet BSL-2 biosafety and laser safety standards at the University of California, Berkeley. All equipment must be rigorously engineered to ensure compliance with stringent laboratory safety protocols, including proper ventilation, containment, and structural integrity for handling biological agents and laser equipment. The installation must be performed to exacting technical specifications to guarantee operational safety and regulatory alignment in a high-risk research environment. The contract is classified as a subcontract under NAICS code 337127, indicating it involves the manufacturing and installation of custom laboratory furniture and equipment. Performance is required at the Berkeley campus with a ZIP code of 94720, and proposals must be submitted by August 20, 2026. The solicitation was posted on July 29, 2026, and interested parties are directed to the BidAmerica platform for further details and submission guidelines. The project is critical to supporting advanced research activities requiring controlled environments and must be executed by qualified vendors with proven experience in laboratory infrastructure.

University of California, Berkeley

POSTED

DEADLINE

Marine Corps Recruit Depot Initial Outfitting Project

Solicitation # W9127S26QA048

This solicitation, numbered W9127S26QA048, is an 8(a) Small Business Set-Aside for the Marine Corps Recruit Depot Initial Outfitting Project, issued under NAICS code 337127 for Institutional Furniture Manufacturing with a size standard of 500 employees. Offers must be submitted no later than September 1, 2026, at 1600 Eastern Time, and all quotes must comply with the Nonmanufacturer Rule, requiring at least 50 percent of the contract value to consist of end items manufactured or processed by domestic small businesses. Contractors must confirm that all supplied commodities meet this requirement, and if any item lacks a qualified small manufacturer, they must immediately notify the Contracting Officer to seek a waiver before submitting their quote. Failure to comply may result in protest, delay, or cancellation of the award. The acquisition is governed by commercial item clauses including RFO 52.212-4 and its addendum, and the Buy American Act applies. A site visit is scheduled for August 12, 2026, at 1100 Pacific Time, and interested parties should contact Timothy Pighee or Vonda Rogers via email to register. The contractor awarded this contract will be subject to evaluations under the Contractor Performance Assessment Reporting System (CPARS), and must ensure financial stability to absorb potential delays from the broader construction schedule, for which the Government is not responsible. While USACE manages the Initial Outfitting, the IO Contractor is expected to align procurement and delivery timelines with the General Contractor’s schedule to avoid cost overruns and operational disruptions. The Government encourages contractors to exhaust their own resources before seeking financial assistance such as prepayments or interest compensation, though consideration may be given under applicable laws and regulations. All terms and evaluation criteria are outlined in the incorporated provisions, including RFO 52.212-1 and RFO 52.212-2, and no separate written solicitation will be issued. This solicitation is the sole source of information for offerors.

W076 Endist Little Rock

POSTED

DEADLINE

in about 1 month

Kwalu Furniture Replacement at the Watkins-Logan Texas State Veterans Home in Tyler, Texas

Solicitation # 8895-SJ

The Texas General Land Office and the Texas Veterans Land Board are soliciting bids for the replacement of Kwalu furnishings at the Watkins-Logan Texas State Veterans Home in Tyler, Texas, under solicitation number IFB8895-SJ. This procurement covers the full scope of services including the supply, delivery, installation, and disposal of all required furnishings, ensuring seamless integration into the facility while maintaining compliance with operational and safety standards. Bids must be submitted by the deadline of August 27, 2026, and the contract is open to all qualified vendors without a specified set-aside classification. The project is managed by the State and Local Government entity under the Texas General Land Office, with all work to be performed at the designated veterans home location in Tyler, Texas. Primary point of contact for inquiries is Stefanie Jackson, reachable via phone or email, and all relevant details and submission requirements are available through the official TX SmartBuy portal. The solicitation emphasizes timely execution and adherence to facility needs, with no alternative funding or sourcing mechanisms indicated.

General Land Office

POSTED

DEADLINE

Supply of Educational or Facility Equipment (e.g., Containers, Furniture, IT Hardware)The contract pertains to the supply of educational and facility equipment, including classroom furniture, storage containers, lab equipment, and IT hardware necessary for daily school operations. All delivered items must be accompanied by complete operation and maintenance manuals to ensure proper use and long-term functionality. Delivery is a required component of the contract, and the equipment must meet operational standards suitable for deployment in school environments. The solicitation is structured as a subcontract under NAICS code 337127, indicating the focus on manufacturing and supplying furniture and related products for institutional use. The opportunity is managed by Northside ISD in Texas, with responses due by August 20, 2026, at 3:30 PM. The posting date is July 28, 2026, and bidders are expected to submit proposals via the Bonfire Hub platform linked in the contract data. There is no specified set-aside designation or point of contact provided in the available information.

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

Same awarding agency

Emergency Lighting Strip SupplyThe contract is for the supply of ten emergency lighting strips with part number S1S1S1, designed for low-voltage, long-duration operation to ensure cabin safety in marine or aerospace environments. These lighting units are critical for maintaining visibility and safety during power outages or emergency scenarios, meeting stringent operational requirements for durability and reliability under extreme conditions. The contract is classified as a subcontract under NAICS code 335129, indicating it falls within the broader category of electrical lighting equipment manufacturing. It was posted on July 31, 2026, with a response deadline of August 12, 2026, at 5:00 PM, giving potential suppliers a limited window to submit proposals. The agency responsible is the Navsup Fleet Logistics Center Puget Sound, operating under the Department of Defense, which underscores the sensitive and mission-critical nature of the equipment. Although specific location details for performance or delivery are not provided, the intent is for the lighting strips to support operations in demanding environments where standard lighting systems would be insufficient. All submissions must comply with technical and performance specifications tied to the part number and intended use without room for substitution or deviation.

Other Lighting Equipment Manufacturing

POSTED

DEADLINE

Fire Detection Sensor SupplyThe contract pertains to the supply of fire detection sensors with part number J1J1J1, required to meet stringent aerospace and marine safety standards including MIL-STD-810, ensuring robust performance under extreme environmental conditions. This subcontract is solicited by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, an agency under the Department of Defense, and is specifically intended for providers capable of delivering certified components compliant with military-grade specifications. The solicitation was posted on July 31, 2026, with a deadline for responses set for August 12, 2026, at 5:00 PM, offering a limited window for qualified vendors to submit proposals. The North American Industry Classification System code 334511 indicates the focus on manufacturing other electronic components, aligning the requirement with specialized sensor production expertise. Performance is expected to support defense operations without specific location constraints, allowing flexible logistics planning while maintaining strict adherence to technical and compliance benchmarks.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Data Network Switch SupplyThe contract solicits the supply of four ruggedized data network switches, part number I9I9I9, designed to meet naval EMI/EMC standards for reliable onboard connectivity in military environments. These switches are intended for use in demanding maritime conditions where electromagnetic interference protection and durable construction are critical for mission-critical communications. The solicitation is issued as a subcontract under NAICS code 334511, which corresponds to the manufacturing of communications equipment, and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. The opportunity was posted on July 31, 2026, with a mandatory response deadline of August 12, 2026, at 5:00 PM, leaving a limited window for qualified vendors to submit proposals. Performance location and point of contact details are not specified, but the equipment must be delivered to support naval operations, and compliance with strict military-grade electromagnetic compatibility requirements is non-negotiable.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Electrical Harness SupplyThe contract pertains to the supply of a main electrical harness with part number H8H8H8, specifically designed for integration into lavatory units and requiring full EMI/RFI shielding to ensure electromagnetic compatibility in sensitive environments. The harness must meet all applicable MIL-SPEC standards to guarantee durability, performance, and reliability under demanding operational conditions typical of military and defense applications. The work is being procured as a subcontract under the NAICS code 335931, which classifies it within the electrical component and accessory manufacturing sector. The solicitation was posted on July 31, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM. The contracting entity is the Naval Supply Systems Command Fleet Logistics Center Puget Sound, acting on behalf of the Department of Defense, indicating this is a defense-related requirement. While specific performance locations and point of contact details are not provided, the nature of the procurement and the agency involved confirm the project’s alignment with U.S. military equipment integration standards and timelines. Bidders must ensure compliance with all technical, quality, and delivery requirements to be considered for award.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Water Pump Assembly SupplyThe contract is for the supply of a water pump assembly with part number G7G7G7 specifically designed for integration into aircraft lavatory systems, with stringent requirements for marine or aerospace durability to ensure reliable operation under extreme environmental conditions. The item must meet high-performance standards suitable for aviation use, emphasizing longevity, corrosion resistance, and operational stability in high-vibration, high-humidity settings typical of aircraft environments. This is a subcontract under the NAICS code 333911, indicating manufacturing of other commercial and service industry machinery, and is administered by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the U.S. Department of Defense. The solicitation was posted on July 31, 2026, with a firm deadline for responses set for August 12, 2026, at 5:00 p.m. The contract does not specify a set-aside classification or reserved status for small businesses, and no point of contact details are provided within the data. Performance location and office address information are incomplete, but the end-use context and governing agency confirm the work is directly tied to military aviation support systems. Interested parties must submit compliant proposals by the deadline to qualify for award, with the expectation that the delivered assemblies will undergo rigorous quality verification before integration into naval aircraft systems.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Waste Holding Tank SupplyThe contract calls for the supply of a corrosion-resistant, sealed waste holding tank designated by part number F6F6F6, specifically designed for integration into marine sanitation systems. The material and construction must meet strict durability standards to withstand prolonged exposure to saltwater, humidity, and harsh marine environments while maintaining complete seal integrity to prevent leaks or contamination. The item is classified under NAICS code 332439, indicating it falls within the category of other fabricated metal product manufacturing, and is beingprocured as a subcontract under the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Puget Sound. The solicitation was posted on July 31, 2026, with responses due by August 12, 2026, at 5:00 PM, leaving a limited window for qualified suppliers to submit proposals. Performance location details are not specified, but the nature of the component implies delivery to naval vessels or shore-based marine sanitation facilities operated by the U.S. Navy. All submissions must adhere to technical specifications ensuring compatibility, safety, and long-term operational reliability under demanding maritime conditions.

Other Metal Container Manufacturing

POSTED

DEADLINE

Seating Module SupplyThe contract seeks the supply of a passenger seating module designed for integration into naval aircraft or vessel interiors, classified as a commercial or custom item under NAICS code 336320. The work is scoped as a subcontract under the Department of Defense, specifically managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, with a response deadline set for August 12, 2026, at 5:00 p.m. Eastern Time. The module must meet stringent military standards for durability, safety, and compatibility with existing naval platforms, ensuring seamless installation and long-term operational reliability in demanding environments. All deliverables are expected to align with defense-specific requirements for space utilization, weight constraints, and environmental resilience, including resistance to saltwater, extreme temperatures, and high vibration. While no set-aside designation or point of contact is specified, the solicitation is open to qualified vendors capable of fulfilling defense logistics needs with either commercial-off-the-shelf solutions or customized designs. The seating module must support passenger comfort and crew ergonomics without compromising structural integrity or mission-critical space allocations aboard naval assets. Performance is anticipated to occur across naval facilities managed by the Department of Defense, with the exact location undetermined. Interested parties must submit proposals prior to the deadline through the official SAM.gov portal, ensuring full compliance with technical specifications, quality assurance protocols, and delivery timelines required for military integration.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Flooring Assembly SupplyThe contract seeks the supply of 100 square feet of slip-resistant, flame-retardant flooring assembly with part number C3C3C3, specifically intended for installation in lavatory or cabin areas aboard naval aircraft. The material must meet stringent safety and performance standards suitable for high-risk maritime aviation environments, ensuring durability under harsh conditions and compliance with fire safety regulations. This is a subcontract opportunity under NAICS code 326199, classified under the Department of Defense with the contracting office managed by Navsup Flt Logistics Ctr Puget Sound. The solicitation was posted on July 31, 2026, and responses are due by August 12, 2026, at 5:00 PM, indicating a tight turnaround for qualified suppliers to submit proposals. The place of performance and point of contact details are not specified, but the flooring will be delivered and installed in support of naval aircraft operations.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Lavatory Unit Manufacturing and AssemblyThe contract requires the full fabrication, assembly, and delivery of a lavatory unit as specified in technical drawing 222222 and part number 111111, encompassing all necessary production steps from raw material processing to final assembly. The scope includes proper packaging and preservation measures to ensure the unit remains in optimal condition during transit and storage, along with strict adherence to UUI/IUID standards for full traceability and compliance with federal asset tracking requirements. This subcontract is issued under NAICS code 332999, indicating it falls under other miscellaneous fabrication, and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. The opportunity was posted on July 31, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM, and performance will be carried out at an unspecified location within the U.S. All submitted units must meet exact technical specifications and documentation requirements to qualify for acceptance.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Oil Burner Sprayer Plates (Drawing D-42042)The contract involves the supply and delivery of ten precision-machined Sprayer Plates, Oil BU, designated as Item No. 2 of Drawing D-42042, specifically engineered to meet the technical requirements for defense oil burner systems. These components are critical to the operational integrity of naval oil burner equipment and must be manufactured to exacting standards to ensure compatibility, durability, and performance under demanding conditions. The work is classified under NAICS code 332721, indicating it pertains to machine shops and related manufacturing services. This is a Small Business Set Aside contract, meaning only eligible small businesses may compete for award, and it is issued as a subcontract under the Department of Defense through Navsup Fleet Logistics Center Puget Sound. The solicitation was posted on July 31, 2026, with a firm response deadline of August 10, 2026, at 9:00 PM Eastern Time. The place of performance and specific delivery location are not detailed, but the requirement is tied to defense systems, implying fulfillment will support military readiness. Access to the full solicitation details is available through the SAM.gov portal.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Supply of Atomizer Assemblies (Todd Combustion BRONW 2.500IN)The contract entails the supply and delivery of three units of Atomizer Assemblies, specifically model BRONW 2.500IN Jacket Tube with NSN 4530-01-119-9501, manufactured to meet original equipment manufacturer specifications for integration into defense systems. The requirement is structured as a subcontract under a Small Business Set Aside - Total designation, exclusively reserved for small businesses, with the NAICS code 333414 indicating classification within the Industrial Machinery and Equipment Manufacturing sector. The solicitation was posted on July 31, 2026, with a response deadline set for August 10, 2026, at 9:00 PM Eastern Time, leaving potential bidders a limited window to submit proposals. The procuring activity is the Naval Supply Systems Command Fleet Logistics Center Puget Sound, operating under the Department of Defense, and the performance location is not explicitly defined but is expected to align with defense logistics requirements. All delivered units must conform strictly to OEM standards to ensure compatibility and reliability within critical military applications.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

DEADLINE

Solicitation # N0040626Q0446

The U.S. Navy’s Fleet Logistics Center Puget Sound is soliciting quotations for Lavatory Units under solicitation number N0040626Q0446, with a response deadline of August 12, 2026, and an anticipated award date in August 2026. All responsible sources are invited to submit proposals, and evaluations will be conducted based on technical factors including delivery date, price, and past performance, with no single factor prioritized over the others. The Government will determine offeror responsibility by assessing price reasonableness and past performance in accordance with RFO 12.203. Technical drawings, references, and technical guidance information are not included in the solicitation due to distribution restrictions; eligible quoters registered with the Joint Certification Program must request these materials directly using their CAGE code and DD Form 2345 from their data custodian. Interested parties must register for JCP through the DLA website to gain access. All correspondence must include the solicitation number in the subject line. The point of contact is Contracting Officer Sara Robinson at sara.e.robinson19.civ@us.navy.mil, and the procurement falls under NAICS code 332999 with no set-aside designation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE