Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CABLE ASSEMBLY, SPEC

Active
SPE4A5-26-T-338TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a single cable assembly with part number 5995-01-628-9301 and purchase request 7017761213, under solicitation SPE4A5-26-T-338T. The item must be delivered within 20 days to the Naval Amphibious Base in Coronado, California, FOB origin, with no variance allowed in quantity. Delivery and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and marking requirements. Government identification must be removed from non-accepted supplies, and bare item marking must conform to applicable standards. Physical identification procedures are defined, and while Item Unique Identification is not mandated, DFARS 252.211-7003(c)(1)(i) remains applicable. The contract prohibits the intentional inclusion of mercury or mercury-containing compounds in the hardware or its contact surfaces, with narrow exceptions for functional uses in batteries, instruments, sensors, weapon systems, and specific reagents approved by NAVSEA; portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Preservation, packaging, and marking materials must also be free of mercury, as per IP056. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The supplier may elect attribute or variable inspection under MIL-STD-1916 unless restricted by contract terms. The contract incorporates technical and quality requirements from the DLA Master List, and packaging follows DLA-specific guidelines. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment. Shipment must be made via the fastest traceable transport method, explicitly excluding parcel post, and must use the provided RDD 777 designation and transportation notes. The item has no shelf life requirement. All documentation and marking must align with DLA standards, and delivery is targeted for August 4, 2026, with the contracting office located within the Department of Defense under the ASC Supplier Oper OEM Division

General Info

Procure cable assembly 5995-01-628-9301, deliver by August 4, 2026, to Coronado, CA, per MIL-STD and DLA specs, no mercury, CMMC Level 2 required.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

444180 - Other Building Material DealersView NAICS

Place of Performance

NAVAL AMPHIB BASE CORONADO, SAN DIEGO, CA, 92155-5084, USA

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A5-26-T-338T

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUSA
Contacts
Courtney Minor
contact@example.gov

Full Description

Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY,SPEC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
SPE4A5-26-T-338T
SECTION B
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
PARKER-HANNIFIN CORPORATION 45681 P/N 5030126
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017761213 0001 EA 1.000
NSN/MATERIAL:5995016289301
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
R53257
ASSAULT CRAFT UNIT ACU 1
COMM 619 437 5993 DSN 577 5993
NAVAL AMPHIB BASE CORONADO
SAN DIEGO CA 92155-5084
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R53257
SPE4A5-26-T-338T
SECTION B
PR: 7017761213 PRLI: 0001 CONT’D
ASSAULT CRAFT UNIT ONE
NAB CORONADO
3226 TARAWA RD BLDG 109
SAN DIEGO CA 92155
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R5325762111061
RDD: 777
PROJ: LE5 TP 2
SUPP ADD: YA0020 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: 9B ADV: FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE4A5-26-T-338T NSN/Part Number: 5995-01-628-9301 Quantity: 1 EA Purchase Request: 7017761213QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-15FV
This contract is for the procurement of three special purpose electrical cable assemblies, identified by NSN 5995016304661 and part number 03538SOCN7288463P010 from Winchester Interconnect RF Corporation. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeline is set for 171 days after the order, with a required delivery date of February 14, 2027. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information protocols. While physical identification and bare item marking are required, Item Unique Identification is not necessary per the service customer's request.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 444180
New
DIBBS
MICROCIRCUIT, DIGITA
Solicitation # SPE7M5-26-T-403H
This contract is for the procurement of five digital microcircuits, specifically part number 1003935G-3 from BAE Systems Information and Electronic, under NSN 5962-01-627-5783. The agreement mandates strict adherence to Federal Supply Class 5962 standards, requiring the contractor to maintain comprehensive supply chain traceability and provide a completed DLA Land and Maritime Form 918. Documentation must be submitted via email for approval by the contract administrator at least 15 days before the delivery date, as shipment is prohibited without written authorization. The delivery is set for 197 days after order, with the destination and inspection point located in Columbus, Ohio. Technical requirements emphasize rigorous packaging standards, including MIL-PRF-81705 for electrostatic discharge and electromagnetic interference protection to prevent damage to component leads. Additionally, the contractor must comply with CMMC Level 2 self-assessment, follow MIL-STD-129 marking guidelines, and ensure lead finish markings adhere to IPC/JEDEC J-STD-609.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 444180
New
DIBBS
RECTIFIER, SEMICONDU
Solicitation # SPE7M5-26-T-401R
This contract is for the procurement of one semiconductor rectifier, specifically part number 36MT120 manufactured by Infineon Technologies Americas Corp, under NSN 5961-01-543-7026. The item is designated as a critical application item, and the government has specified that surplus stock is not acceptable. Delivery is required within 20 days after the order, with a required delivery date of August 6, 2026, shipping to the USS John P Murtha LPD 26. The contractor must adhere to strict quality and technical standards, including supply chain traceability documentation and qualification requirements for Federal Supply Classes 5961 and 5962. Packaging and marking must comply with MIL-STD-129 and IPC/JEDEC J-STD-609 to properly identify lead or lead-free attributes. Additionally, the contract mandates specific DLA packaging requirements and the removal of government identification from any non-accepted supplies.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 444180
New
DIBBS
STRIP, ELECTRICAL GR
Solicitation # SPE7M0-26-T-039G
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of one electrical grounding strip under NSN 5999-01-625-3416. The contract requires delivery within five days after the order is placed, with the place of performance located in San Diego, California. The response deadline for this requirement is August 24, 2026. The procurement is subject to several technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Because no existing data is available, the alternate offeror must provide a complete data package for both the approved and alternate parts. All technical specifications are governed by the DLA Master List of Technical and Quality Requirements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 444180
New
DIBBS
ANTENNA ASSEMBLY
Solicitation # SPE7M5-26-T-403S
This contract is for the procurement of one antenna assembly, identified by NSN 5985-01-627-3608 and part number 529SZ108-01 from Atrenne Computing Solutions, LLC. The order is designated as a critical application item and is subject to strict technical and quality requirements, including CMMC Level 2 self-assessment and the protection of covered defense information. A specific prohibition is placed on the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components like batteries or sensors as specified by NAVSEA. The delivery is required within 20 days after receipt of order, with a required delivery date of May 1, 2025. Shipping is FOB Origin and must be sent via the fastest traceable means to the USS Somerset (LPD 25). Packaging must adhere to DLA requirements and MIL-STD-129, with specific instructions to use ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. This solicitation is a total small business set-aside under NAICS code 444180.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 444180
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-Q-0855
The contract involves the procurement of 12 electrical plug connectors with NSN 5935-01-626-1291 under solicitation SPE7M5-26-Q-0855, issued by the DLA Land and Maritime Active Devices Division. This is a qualified item subject to the Qualified Products List (QPL) for Federal Stock Class 5935 connector assemblies and contacts, as defined in Procurement Note H01, and must comply with the latest revisions of SAE-AS50151E and SAE AS34091(R2021) technical specifications. Removable crimp-type contacts must not be pre-installed in the connector insert; instead, they must be separately packaged in a close-fitting, noncorrosive rigid container such as a vial or box and enclosed within the unit container, with all spare contacts included in the same container. Packaging and preservation must adhere to MIL-DTL-55330 for connectors, and overall packaging, marking, and palletization must follow MIL-STD-2073-1E and RP001 DLA Packaging Requirements, with marking conforming to MIL-STD-129 and no special marking required. The contract employs firm fixed price terms with zero variance allowed, and delivery is required 158 days after order date to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and government-arranged transportation. Inspection and acceptance occur at destination. The supplier must comply with stringent cybersecurity requirements including DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, and is prohibited from using Bytedance-covered applications. The contract also mandates adherence to sustainable products standards, employment reporting for veterans, and prohibitions on intentional addition of mercury or mercury-containing compounds, except for specific exemptions outlined in NAVSEA 5100-003D for functional components. Electronic invoicing through WAWF is required, and the solicitation is open to all responsible offerors, with award based on best value considering past performance, delivery, and price. The solicitation was issued on August 10, 2026, with quotations due by August 25, 2026, and responses must be submitted through DIBBS.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 444180
New
DIBBS
SHIELD, ELECTRONIC C
Solicitation # SPE7M5-26-T-400N
The contract solicitation SPE7M5-26-T-400N seeks 30 units of Electronic Shield C, identified by NSN 5999-01-628-3494 and part number 122164A from Shield Technologies Corp, with a requirement for delivery within 17 days after order and FOB origin shipping terms. All items must comply with stringent packaging and marking standards, including adherence to MIL-STD-129 for labeling and RP001 for palletization, while also following the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951 for non-hazardous items and TQ requirement IP025 for hazardous materials as defined by FED-STD-313. The unit of issue is each, with zero variance allowed on quantity, and inspection and acceptance are both required at destination. The delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and electronic invoicing via WAWF is mandatory, requiring contractor registration in SAM and WAWF systems. The solicitation is subject to the Buy American Act and Berry Amendment restrictions, with a $150,000 threshold, and mandates compliance with DFARS clauses governing prohibited materials such as hexavalent chromium, covered defense telecommunications equipment, and export-controlled items. Contractors must affirm they will not provide prohibited equipment or services and must comply with cybersecurity requirements including DFARS 252.204-7012 and NIST SP 800-171 DOD Assessment Requirements under deviation 2026-O0025. Additional clauses require whistleblower protections, disclosure of information, suppression of mandatory arbitration agreements, and prohibitions on procurement from Communist Chinese military companies. The contract also incorporates the Combating Trafficking in Persons clause and hazardous material identification requirements. Offers must be submitted via DIBBS by close of business on August 21, 2026, and the procurement is eligible for automated award. All quotations are subject to price evaluation, and offerors must represent their business size, socioeconomic status, and joint venture status if applicable. The contracting officer is Karen Collins of the DLA Land and Maritime Active Devices Division, with point of contact details provided for inquiries and submissions.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 444180
New
DIBBS
NRP, LAMP, MARKER YEL
Solicitation # SPE7M1-26-T-268S
The contract pertains to the procurement of 28 units of NRP, LAMP, MARKER YELLOW with NSN 5960016136117 under solicitation SPE7M1-26-T-268S, issued by the Department of Defense’s Maritime Supply Chain. Delivery is required within 165 days after order placement, with shipment FOB origin to the final destination at the DLA Distribution New Cumberland Facility in New Cumberland, PA. Inspection and acceptance occur at the destination, and all packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods (Clng/Dry: 1), unit containers (D3), intermediate containers (E5), and a packaging code of U. Marking must adhere to MIL-STD-129 with a special fragile marking code 36-36 indicating “Fragile, arrow up and glass.” The item is classified as a critical application item and is subject to all applicable DLA packaging and shipping requirements, including compliance with DFARS clause 252.223-7001 for hazardous material labeling and 252.247-7023 for sea transportation. The contract mandates electronic invoicing exclusively through Wide Area WorkFlow, and cybersecurity protections are enforced via DFARS clauses 252.204-7012 and 252.240-7997, requiring NIST SP 800-171 controls and cyber incident reporting. Contractors must be registered in SAM, possess a valid UEI, and comply with all socioeconomic representations, including small business status and prohibitions on acquiring covered telecommunications equipment from foreign adversaries. Payment is subject to accelerated terms for small business subcontractors, and any contractual modifications must follow prescribed pricing protocols. The solicitation closed on August 20, 2026, and awards are expected under a fixed-price structure with zero variance allowed in quantity. All technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, and the contract incorporates FAR and DFARS clauses covering inspection, delivery, liability, representations, and contractor cybersecurity obligations without exception.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 444180
New
DIBBS
FERRULE, MODIFIED, AI
Solicitation # SPE7M5-26-T-398F
The contract is for the procurement of 1,225 units of FERRULE, MODIFIED, AI, identified by NSN 5999-01-576-1856 and Raytheon part number 6392822, under solicitation SPE7M5-26-T-398F, issued by the Department of Defense’s DLA Land and Maritime, Active Devices Division. The item must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with a delivery schedule of 137 days after award, and a need ship date of January 5, 2027, with an original required delivery date of July 16, 2027. Quantity is fixed at zero variance, and inspection and acceptance occur at the destination per FAR 52.246-2. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special marking code 00 indicating no special marking, and palletization must meet DLA’s RP001 requirements. Hazardous materials handling adheres to IP025 and the Hazard Communication Standard, with specific packaging codes defined for unit and intermediate containers, including QUP 001, pres method 10, clng/dry 1, and pack code U. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and the DLA Master List of Technical and Quality Requirements, with all technical and quality provisions identified by R or I numbers being binding. Cybersecurity requirements include Compliance with CMMC Level 2 Self-Assessment and adherence to DFARS 252.204-7012 for safeguarding Covered Defense Information, with NIST SP 800-171 assessment requirements also applied under a deviation. Contractors must validate SAM representations, confirm they are not providing covered defense telecommunications equipment, and comply with the Buy American Act and Berry Amendment thresholds reduced to $150,000. The contract is a DX or DO rated order under DPAS. All submissions must occur via DIBBS by August 20, 2026, and electronic invoicing must be processed through Wide Area Workflow. Payment and contract administration are managed by the DLA contracting activity in Columbus, Ohio, with Karen Collins as the primary point of contact
ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12SH
The contract solicits a special purpose electrical cable assembly identified by NSN 5995016284646 and part number EB4210-30-100A6, to be delivered in a single unit under CLIN 0001 with a delivery window of 170 days after award, targeting an original delivery date of October 27, 2027, and a need ship date of January 31, 2027. Delivery is FOB origin, with inspection and acceptance occurring at the destination facility located at DDSP New Cumberland Facility, New Cumberland, PA. The item must be packaged and preserved in strict compliance with MIL-STD-2073-1E, using preservation method 10 (cleaning and drying only), with no chemical preservation materials allowed, and packed in accordance with DLA RP001 packaging requirements. Marking must adhere to MIL-STD-129, including Data Matrix 2D barcoding, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking processes, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major, and zero non-conformances are required unless otherwise stated. Compliance with CMMC Level 2 cybersecurity controls is mandatory, and the contractor must self-assess and maintain a current CMMC Level 2 status. The supply is exempt from Item Unique Identification under DFARS 252.211-7003(c)(1)(i). All technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and the contractor must comply with applicable FAR and DFARS clauses including 252.204-7012 for safeguarding covered defense information, 252.240-7997 for NIST SP 800
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 444180
New
SLED
Statewide Building Supplies QVL (For Additional Vendors)
Solicitation # STATE 0000000529SL
The State of Missouri is issuing a solicitation for a Qualified Vendor List (QVL) to procure building supplies across various state agencies statewide, under contract number STATE 0000000529SL, with proposals due by August 19, 2026. This non-exclusive, firm-fixed-price contract allows state entities to place orders for a wide range of building materials including electrical, plumbing, roofing, lighting, and general construction supplies, with deliveries made FOB destination to any location throughout Missouri. The contract period runs from the date of award through March 8, 2027, with an option for two one-year renewals at the state’s sole discretion. Contractors must submit fixed-price quotations through the MissouriBUYS portal, specifying delivery timelines in calendar days after receipt of order, and must comply with stringent documentation requirements via ten required exhibits covering business certifications, employee data, ownership disclosures, and compliance attestations. All vendors must provide a current Unique Entity ID from SAM.gov and adhere to state laws including RSMo Chapter 34 and the Americans with Disabilities Act. A mandatory compliance framework includes the Anti-Discrimination Against Israel Act for businesses with ten or more employees, requiring affirmation of no boycott activities related to Israel, and participation by service-disabled veteran-owned businesses or organizations for the blind and sheltered workshops, which may earn up to 15 bonus points based on percentage of contract value performed. The evaluation is based on the lowest and best quote, integrating a 10% Buy American price preference for qualifying domestic products and a Missouri state preference when quality and price are substantially equal. Invoicing must reference purchase order numbers, be submitted via email or fax to the Division of Purchasing, and include remittance details from the vendor’s MissouriBUYS registration, with no federal electronic invoicing systems used. The state retains inspection and acceptance authority at the point of delivery, requiring all goods to be merchantable, free of defects, and conform to all technical and legal specifications. Contractors must notify the state of any material changes affecting performance, including bankruptcy, legal actions, or personnel conflicts, and are subject to annual compliance affidavits verifying participation commitments. The contract includes strict conflict-of-interest prohibitions, no arbitration provisions, and requires all legal disputes to be filed in Cole County or the U.S. District Court for the Western District of Missouri. Funding is contingent upon annual legislative appropriation, and the state is not liable for costs arising from non-appropriation. All submissions must be electronic, in
PROC OA DIVISION OF PURCHASING PROCUREMENTS

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 444180
DIBBS
ELECTRONIC MODULE, S
Solicitation # SPE7M1-26-U-4920
The contract involves the procurement of an Electronic Module, S, identified by NSN 5963016306065 and part number EMI-TN-2, under solicitation SPE7M1-26-U-4920, issued by the Defense Logistics Agency’s Maritime Supply Chain division. The requirement is for 13 units, each priced at $13.00, with a total estimated value of $169.00, though this is an estimated quantity under an Indefinite Delivery Contract (IDC) with a maximum value ceiling of $350,000. Delivery must occur within 76 days after the date of order, with FOB Origin terms, and all items are subject to inspection and acceptance at the destination. The module is designated as a critical application item, requiring strict compliance with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, particularly under RA001, and must meet all criteria from the cited reference drawing even if the technical data provided is incomplete. Packaging and handling are governed by MIL-STD-2073-1E with packaging code U, preservation method GX, and palletization per RP001 DLA requirements. ESD and EMI protection are mandatory using DOD-qualified materials per MIL-PRF-81705, specifically Type I barrier material for both ESD and EMI, with Type III as an acceptable alternative wrap if cushioning is not otherwise specified. Suppliers must source all barrier materials only from manufacturers listed on QPL-81705 and ensure complete physical protection of leads, terminals, and protrusions to prevent damage. Mercury or mercury-containing compounds are prohibited from direct contact with the hardware, except for functional uses in batteries, fluorescent lights, approved instruments, or sensors per NAVSEA 5100-003D, which also requires shockproof packaging and a second containment boundary for any exempted mercury components. Labeling follows MIL-STD-129 with special code 39-39 to denote ESD-sensitive electronic device status, and includes proper barcoding via 2D Data Matrix or linear barcodes, along with hazard communication labels per 29 CFR 1910.1200. All submissions must be made via DIBBS by August 19, 2026, and the contractor must comply with a suite of Federal Acquisition
MARITIME SUPPLY CHAIN

POSTED

7 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLI
Solicitation # SPE4A5-26-Q-0679
This contract is a solicitation for the procurement of 20 cylindrical roller bearings, identified as NSN 3110-01-731-9490 and Sikorsky Aircraft Corporation part number SB2197-101. The items are designated as Navy Critical Safety Items and Critical Application Items, requiring strict adherence to quality and technical standards. The agreement is based on a Firm Fixed Price with a delivery timeline of 154 days after order. Inspection and acceptance will occur at the point of origin. The contractor must comply with several DLA technical and quality requirements, including SAE AS9100 for manufacturers and specific packaging and marking standards under MIL-STD-129 and MIL-DTL-197M. Special sampling plans from Sikorsky Corporation are acceptable provided they meet ASQ H1331 or MIL-STD-1916 standards. All requests for waivers or deviations must be approved by the DSC Contracting Officer, and specific preservation methods must be applied based on the bearing type and size.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
DIBBS
PARTS KIT, VALVE, CUR
Solicitation # SPE4A5-26-T-339M
This contract, identified as SPE4A5-26-T-339M, is for the procurement of two valve cure parts kits from Parker-Hannifin Corporation, part number 4-156-510, under NSN 2915008702863. The items are designated as critical application items with a Type I shelf life of 120 months. Delivery is required within 171 days, with a need ship date of February 7, 2027, and an original required delivery date of August 1, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to several technical and quality requirements, including DLA packaging standards, configuration change management, and specific marking guidelines per MIL-STD-129. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, requiring each kit to be contained in a single cushioned box including a detailed contents list of component part numbers and quantities.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, RECESSED
Solicitation # SPE4A5-26-T-343J
This contract is for the procurement of 30 recessed washers, identified by NSN 5310014476251 and Bell Textron part number 140-007-41S34-2. The order is managed under solicitation SPE4A5-26-T-343J with a required delivery date of April 21, 2027, and a delivery window of 171 days. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Notably, item unique identification is not required for this order, and the material has no shelf life requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
GEAR, WORM
Solicitation # SPE4A5-26-T-342P
This contract is for the procurement of 35 units of worm gears, identified by NSN 3020011627566 and Sikorsky part number 70358-06616-101. The items are designated as critical application items and must adhere to specific quality and technical requirements, including the DLA Master List and CMMC Level 2 self-assessment. While Item Unique Identification is not required, the contractor must comply with covered defense information regulations and specific marking and identification standards. Delivery is set for 171 days after order, with a required delivery date of May 30, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Packaging must follow ASTM D3951 and MIL-STD-129, with DLA packaging requirements taking precedence. Sampling for quality assurance may follow the Sikorsky Corporation alternate sampling plan QAP 1201, provided it meets or exceeds ASQ H1331 or MIL-STD-1916 standards.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
LOAD CABLE, R-HHSI, A
Solicitation # SPE4A5-26-T-340Q
This contract is a solicitation for the procurement of seven Load Cable, R-HHSI, A units, identified by NSN 6610-01-581-0268 and L3Harris Technologies part number 425560-006. The requirement is managed by the Department of Defense ASC Supplier OEM Division under solicitation number SPE4A5-26-T-340Q. Delivery is required within 171 days, with a need ship date of February 7, 2027, and an original required delivery date of May 14, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and Covered Defense Information protocols. Quality assurance will be conducted via zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements for procurement. This is designated as a critical application item with no allowed quantity variance.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE4A5-26-T-287N
This contract solicitation, designated SPE4A5-26-T-287N, seeks the delivery of 72 units of a plain seal identified by NSN 5330-01-492-3389, with a total estimated contract value of approximately $179,906.80 across multiple line items. The delivery is scheduled to be completed within 277 days after the order date, with a target need ship date of April 26, 2027, and the goods are to be delivered FOB origin to DLA Distribution Jacksonville at 175 Swan Road, Jacksonville, FL 32212-0103. The contract requires strict compliance with federal standards including MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for shipment and storage markings, and MIL-STD-130N for identification marking of U.S. military property, with no asbestos permitted as defined by Fed-Std-313. All packaging and labeling must adhere to DLA’s RP001 packaging requirements, with hazardous materials subject to 29 CFR 1910.1200 and proper identification under MIL-STD-129, and barcoding is implicitly mandated through these standards. Electronic invoicing is mandatory through Wide Area WorkFlow, with no alternative systems permitted, and acceptance of the goods occurs at the destination by Government personnel. The solicitation incorporates a comprehensive list of Federal Acquisition Regulation clauses governing cybersecurity, labor, sustainability, and administrative compliance, many of which are modified by Deviation 2026-00038 or other specific deviations. Key clauses include 252.204-7012 for safeguarding covered defense information and cyber incident reporting, 52.222-50 for combating trafficking in persons, 52.223-3 for hazardous material identification, and 52.232-39 and 52.232-40 for payment and subcontractor obligations. Offerors must maintain active SAM.gov registrations and provide accurate representations regarding small business status, socioeconomic certifications, and disclosure of covered defense telecommunications equipment. The contract does not specify a source selection methodology, nor does it include formal evaluation factors or weights, and while it references potential options for long-term performance, no option quantities are stated. Technical and
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334417
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE4A5-26-T-340H
This contract, identified as SPE4A5-26-T-340H, is a solicitation from the Department of Defense ASC Supplier OEM Division for the procurement of one data entry keyboard, part number 8524315-1 by Honeywell International Inc. The item is classified under NSN 5999015465257 and is designated as a critical application item. Delivery is required within 171 days, with a need ship date of February 7, 2027, and an original required delivery date of June 10, 2027. The shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E, though Item Unique Identification is not required. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance. Technical and quality requirements are governed by the DLA Master List, and any configuration changes must be managed through formal engineering change proposals or requests for variance.
Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
INDICATOR, PRESSURE
Solicitation # SPE4A5-26-T-339Z
This contract is for the procurement of one pressure indicator, identified by NSN 6685-01-491-3871, with a required delivery date of February 28, 2027. The item is designated as a critical application item and must adhere to specific technical and quality requirements, including the prohibition of intentionally added mercury or mercury-containing compounds, except where functionally required. The contract specifies that the item must be delivered FOB Origin to the DLA Distribution New Cumberland facility within 171 days. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, while palletization must adhere to DLA packaging requirements. Item Unique Identification is not required for this order. The contract references specific part numbers from Electric Boat Corporation and Cameron Energy Services Corp as approved sources.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE4A5-26-T-342X
This contract is a solicitation for the procurement of three units of a control cam, identified by NSN 3040-01-385-6861 and Lockheed Martin part number 357556-6. The item is designated as a critical application item with no shelf life requirement. Delivery is required within 171 days after order, with a need ship date of February 7, 2027, and an original required delivery date of January 23, 2028. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, physical identification, and the removal of government identification from non-accepted supplies. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the origin. Additionally, the contract requires compliance with Cybersecurity Maturity Model Certification Level 2 self-assessment and regulations regarding covered defense information.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PANEL STRUCTURAL
Solicitation # SPE4A5-26-T-343M
This solicitation, issued by the Department of Defense under the ASC Supplier OEM Division, is for the procurement of nine structural panels identified by NSN 1560-01-674-2671. The contract requires delivery within 171 days after receipt of order, with performance taking place in San Diego, California. The solicitation was posted on August 11, 2026, with a response deadline of August 19, 2026. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with these panels is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification, complete specific DOD export-control training, and be approved by the DLA controlling authority.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A5-26-T-343U
This contract is for the procurement of 20 machine thread plugs, identified by NSN 5365-00-889-9564 and Parker Hannifin Corporation part number 55548. The items are designated as critical application items and must adhere to strict technical and quality requirements, including specific standards for measuring and test equipment, configuration change management, and physical identification. Sampling must be conducted according to MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan required for acceptance. Delivery is set for 171 days after order, with a required delivery date of March 21, 2027, shipped FOB Origin to DLA Distribution San Diego. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The contract specifies a zero percent quantity variance and designates the destination as the point for both inspection and acceptance.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
THERMOMETER, SELF-INDIC
Solicitation # SPE4A5-26-T-343C
This contract is for the procurement of one self-indicating bimetallic thermometer, identified by NSN 6685-01-417-6054 and Moeller Instrument Company part numbers 100417 and ITD32404-S. The item is designated as a critical application item and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The required delivery date is March 10, 2027, with a delivery window of 171 days after order. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E, with specific requirements for delicate instrument marking. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
CABLE ASSEMBLY, SPEC - Department Of Defense | CLEATUS