Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CABLE ASSEMBLY, SPEC

Active
SPE7L4-26-T-5973Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies a single unit of a special-purpose electrical cable assembly with NSN 5995-01-623-4267, requiring delivery within five days FOB origin, with no tolerance for quantity variance. The item must meet stringent technical and quality standards defined by the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements, including palletization per RP001, and all markings must adhere to established military protocols. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, enforcing zero non-conformances unless otherwise contracted. The cable assembly is subject to Cybersecurity Maturity Model Certification Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. The delivery address is Holloman Air Force Base, and shipment must use traceable freight methods—parcel post is prohibited. The contract was issued under solicitation SPE7L4-26-T-5973 with an original required delivery date of August 3, 2026, and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact.

General Info

Single electrical cable assembly, NSN 5995-01-623-4267, due Aug 3, 2026, FOB origin, zero tolerance, military packaging, CMMC Level 2.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

260 DELAWARE AVE BLDG 311, HOLLOMAN AFB, NM, 88330-7706, US

Set-Aside

NONE

Documents

(1)

SPE7L4-26-T-5973.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY<(>,<)> SPECIAL PURPOSE, ELECTRICAL
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
BAE SYSTEMS INFORMATION AND ELECTRONIC 12436 P/N 2217825-001
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7L4-26-T-5973
SECTION B
PR: 7017719854 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017719854 0001 EA 1.000
NSN/MATERIAL:5995016234267
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB4801
FB4801 49 LRS LGRDDC
CP 575 572 5566
260 DELAWARE AVE BLDG 311
HOLLOMAN AFB NM 88330-7706
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4801
FB4801 49 LRS LGRDDC
CP 575 572 5566
260 DELAWARE AVE BLDG 311
HOLLOMAN AFB NM 88330-7706
US
M/F: (TCN) FB480162100225
RDD: 777
PROJ: 880 TP 1
SUPP ADD: YAG865 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 01 ADV: 2B FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE7L4-26-T-5973
SECTION B
PR: 7017719854 PRLI: 0001 CONT’D
SPE7L4-26-T-5973 NSN/Part Number: 5995-01-623-4267 Quantity: 1 EA Purchase Request: 7017719854QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-T-5698
The contract pertains to the procurement of a rotary switch with NSN 5930-01-236-0272, quantity one unit, under purchase request 7017726926, with a delivery requirement of 20 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The alternate offeror must submit a complete data package that includes detailed information for both the approved and alternate parts. The solicitation number is SPE7M8-26-T-5698, issued on August 4, 2026, with responses due by August 17, 2026. The contract is classified under NAICS code 334419 and is administered by the Electrical Devices Division of the Department of Defense. Performance will occur at Holloman AFB, ZIP 88330-7706, with Dondiego Boler listed as the primary point of contact, reachable via email and phone. No government identification removal requirements are applicable due to lack of available data.
ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-11YL
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-496-9541, in a quantity of 26 units, under solicitation SPE4A6-26-T-11YL, issued by the ASC Commodities Division of the Department of Defense. The procurement is a total small business set-aside, with responses due by August 12, 2026, and delivery required 291 days after order. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and explicit DLA authorization may access the controlled data. The place of performance is New Cumberland, PA, 17070-5002, and the primary point of contact is Jessica Fuentes-OSSIO, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12CF
The contract pertains to the procurement of four cable assemblies under solicitation SPE4A6-26-T-12CF, with a specific NSN 5995-01-610-0427 and a delivery deadline of 171 days after award. The item is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with verification levels and sampling protocols governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with corresponding AQLs of 0.1, 1.0, and 4.0. The contractor must comply with DLA packaging standards, ensure physical identification and bare item marking, and remove government identification from non-accepted supplies. The technical data associated with this cable assembly is controlled under ITAR or EAR, restricting export and disclosure to foreign persons without prior authorization, and access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The contract also enforces CMMC Level 2 certification for any third-party assessor and applies covered defense information protocols, with all requirements binding under the version of the DLA Master List effective on the solicitation issue date. The point of contact for inquiries is Kory Walker of the Department of Defense’s ASC Commodities Division, and performance is required at New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-12AC
This contract is for the procurement of 11 special-purpose electrical cable assemblies, designated by NSN 6150-01-469-9741, under solicitation SPE4A6-26-T-12AC. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed, transferred, or exported to foreign persons or entities without prior authorization from the Department of State or the Department of Commerce. This restriction applies universally, including to foreign nationals within the United States and to foreign subsidiaries of U.S. companies. Access to this controlled technical data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been officially approved by DLA. The Defense Logistics Agency enforces these requirements through DFARS 252.225-7048 and mandates adherence to its packaging and data handling standards. The delivery must be completed within 171 days after contract award, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is managed by the ASC Commodities Division of the Department of Defense, with Jessica Fuentes-Ossio listed as the primary point of contact. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS code 334419 for other electrical equipment and component manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-12JH
The contract pertains to the procurement of a wiring harness identified by part number PE20777 and NSN 6150991855341, with a total quantity of two units to be delivered FOB origin. Delivery is required within 171 days of contract award, with the original required delivery date set for March 16, 2027, and a needed ship date of January 31, 2027. All items must comply with DLA packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Packaging must be palletized according to DLA procurement guidelines, and the delivery destination is clearly specified as the DLA Distribution San Joaquin warehouse in Tracy, California. Quality verification follows zero-defect sampling protocols consistent with MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major unless otherwise defined. Inspection and acceptance occur at the destination point, with no variance allowed in quantity. The contract is issued under solicitation SPE4A6-26-T-12JH, and technical and quality requirements referenced through R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements. The unit of issue is each, at a price of $2.00 per unit, for a total contract value of $4.00. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under the NAICS code 334419, managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIO F
Solicitation # SPE4A6-26-T-12JY
The contract specifies the procurement of a radio frequency cable assembly under solicitation SPE4A6-26-T-12JY, with a quantity of 16 units, each identified by NSN 5995-01-301-8654, to be delivered in 285 days to Robins Air Force Base, Georgia. The item is designated as a critical application item with approved suppliers including TE Connectivity Corporation, FrontGrade Technologies Inc., and DCX-Chol Enterprises, Inc., each using specific part numbers. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and must be complied with in full. Packaging and labeling must follow MIL-STD-129 and DLA Packaging Requirements, with palletization adhering to RP001, while cybersecurity compliance mandates a CMMC Level 2 self-assessment. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling protocols based on MIL-STD-1916 or comparable zero-based plans. All government identification must be removed from non-accepted supplies, and physical markings must be applied per RQ017. Delivery is FOB origin with no variance allowed in quantity, and the required ship date is May 25, 2027. The unit of issue is each, and transportation logistics adhere to DLAD Proc Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-12CU
The contract pertains to the procurement of eight wiring harnesses with NSN 6150-01-568-9945 under solicitation SPE4A6-26-T-12CU, issued by the Defense Logistics Agency’s ASC Commodities Division. Deliveries are due within 171 days of award, and all supplies must comply with stringent quality, security, and export control requirements. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2, requiring third-party assessment organization certification, and is governed by technical and quality requirements from the DLA Master List, including physical identification and bare item marking standards. No surplus material is acceptable, and government identification must be removed from rejected items. Components must originate from qualified manufacturers or products listed on official QPLs or QMLs as specified in procurement note H02. Technical data associated with the item is controlled under either ITAR or EAR regulations, and its export or disclosure to foreign persons—even within the U.S.—is strictly prohibited without prior authorization from the Department of State or Commerce, with DFARS 252.225-7048 applying. Only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and received DLA approval, may access the controlled technical data. The place of performance is Anniston, Alabama, and the point of contact is Berkeley Vaughan.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BUS, CONDUCTOR
Solicitation # SPE4A6-26-T-11XL
The contract pertains to the procurement of five BUS, CONDUCTOR units with NSN 6150-01-444-8038 under solicitation SPE4A6-26-T-11XL, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days of award, with performance to take place in Tracy, California, 95304-5000. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which incorporates referenced technical and quality standards identified by R or I numbers. Removal of government identification from non-accepted items and physical marking of bare items are mandatory per RQ011 and RQ017. Sampling and inspection procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stated, and manufacturers may elect attribute or variable inspection under MIL-STD-1916 unless directed otherwise by the contract. The solicitation opened on August 4, 2026, with responses due by August 12, 2026, and the primary point of contact is Berkeley Vaughan, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATOR
Solicitation # SPE4A6-26-T-11QX
The contract pertains to the procurement of two Indicator Light Assemblies with NSN/Part Number 6210-00-551-3748, under solicitation SPE4A6-26-T-11QX, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days of award, and the response deadline for submissions is August 12, 2026. The technical specifications and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating referenced standards such as ISO 9001:2015 for quality management, along with specific protocols for inspection at origin, measuring and test equipment compliance, and removal of government identification from non-accepted items. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and only U.S. contractors with approved JCP certification, completed DLA training, and formal authorization may access such data. DFARS 252.225-7048 applies to the handling of this controlled information, and additional requirements address covered defense information under RD002. The place of performance is Tracy, California, with Shenika Thompson as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L4-26-T-5974
The contract pertains to the procurement of one bracket, vehicular component, identified by NSN 2590-01-559-1306 and part number 6433083-01M1, to be supplied by BAE Systems Land & Armaments L.P. or AMZ Alabama Inc. Delivery is required within five days of award, with shipment FOB origin and no variance in quantity allowed. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering strictly to DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Packaging and labeling must follow MIL-STD-129 and RP001, with palletization requirements enforced. The item is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be approved unless explicitly authorized by specifications. The delivery destination is in Kaiserslautern, Germany, with the shipment marked for SSA Building 2371 and designated under RDD 999/NMCS procedures. Transportation details reference DLAD PROC NOTE C19 and C20. The contract is tied to solicitation SPE7L4-26-T-5974, with an original required delivery date of August 4, 2026, and all government-specific codes and identifiers are included for administrative and logistical tracking.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336211
New
DIBBS
ANGLE, FENDER REINFO
Solicitation # SPE7L4-26-T-5978
The contract pertains to the procurement of an aluminum angle reinforcement component for fender applications, identified by NSN 2510-00-983-6886 and part number 10911305-2, with a quantity of 73 units. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within or outside the United States, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the associated technical data is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have received formal approval from the DLA controlling authority. The purchase request number is 7016286376, with a delivery timeline of 219 days after contract award. The solicitation, issued under contract number SPE7L4-26-T-5978, was posted on August 4, 2026, with responses due by August 17, 2026. The procurement falls under NAICS code 336211 and is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with performance delivery slated for New Cumberland, PA, 17070-5002. Primary point of contact for inquiries is Ryan Hammond, reachable via email and phone provided in the contract data.
Motor Vehicle Body Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
PANEL ASSEMBLY, CONSOLE
Solicitation # SPE7L4-26-T-5968
The contract specifies the procurement of one unit of a PANEL ASSEMBLY, CONSOLE with NSN 2540-01-179-8841 and part number L112652, supplied by CNH INDUSTRIAL AMERICA LLC. Delivery is required within five days of contract award, with shipment originating FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination. The item must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951; if hazardous per FED-STD-313, packaging must meet TQ requirement IP025, otherwise commercial packaging is permitted. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001. The shipment must be sent via traceable freight methods—parcel post is prohibited—and is to be delivered to the designated military receiving site at Fort Polk, Louisiana, under the RDD/NCMS shipment protocol. The contract references solicitation SPE7L4-26-T-5968, with a required delivery date of August 3, 2026, and the point of contact for inquiries is Anna-Rachelle Betts at DLA. The unit of issue is each (EA) and the total contract value is based on the listed unit price for a single item.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
BAR, LOCKING
Solicitation # SPE7L4-26-T-5969
The contract pertains to the procurement of a single unit of a BAR, LOCKING component identified by NSN 1005-01-188-7858 under solicitation SPE7L4-26-T-5969, with a delivery requirement of five days after award. The item is subject to stringent DLA packaging, technical, and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The component is classified under Category I Munitions List items, triggering strict demilitarization protocols for disposal, and is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access accompanying technical data. The contract mandates adherence to configuration change management, qualified products or manufacturers lists where applicable, inspection and acceptance at origin, and removal of government identification from non-accepted items. Measuring and test equipment must comply with specified standards, and all parties must follow DFARS 252.225-7048 for export-controlled technical data handling. The procurement is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with Paula Chapman as the point of contact, and responses are due by August 17, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
HOOK, PINTLE
Solicitation # SPE7L4-26-U-1050
This contract is for the procurement of a HOOK PINTLE with NSN 2540-01-558-4395 under solicitation SPE7L4-26-U-1050, issued by the Department of Defense through the Defense Logistics Agency. The item is classified as a critical application component and must conform to precise technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override any other specification unless explicitly authorized. The contract prohibits the use of Class I ozone-depleting chemicals in manufacturing or packaging, requiring any substitute chemicals to be submitted for approval. The item must be delivered FOB origin within 80 days in strict quantities of 135 units, with no tolerance for variance in quantity. Packaging must comply with DLA-specific requirements including MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging unless hazardous per Fed-Std-313, in which case TQ requirement IP025 applies, with palletization conforming to RP001. Inspection and acceptance occur at the destination point, and all packaging must reflect the prescribed Unit of Issue and Quantity per Unit Pack (QUP). The procurement is a total small business set-aside under NAICS code 336390, with the estimated unit price at $135.00 per item totaling $18,225.00, though the quantity is considered estimated and subject to modification by the IDC. The contract references the DLA-defined unit of issue system and directs contractors to the official online resource for ANSI X12 conversion. The point of contact is Heather Kessler of the LSO Combat Vehicles and Armament office, with full solicitation details available through the DIBBS system. The solicitation closed on August 19, 2026, with an award expected to follow, and all suppliers must comply with the requirement to remove government identification from non-accepted supplies. The contract does not specify delivery location beyond FOB origin, and all terms are governed by DLA policies with no deviations permitted without formal amendment.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
CLAMP, ELECTRICAL
Solicitation # SPE7L4-26-T-5979
This contract is for the procurement of one electrical clamp, identified by NSN 5999-01-302-4282 and part number 480732, under solicitation SPE7L4-26-T-5979, issued by the Department of Defense through the Logistics Support Activity for Combat Vehicles and Armament. Delivery is required within five days of order placement to Fort Riley, Kansas, with FOB origin terms and zero tolerance for quantity variance. The item is classified as a critical application component and must comply with all DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must adhere strictly to MIL-STD-129 and RP001, with hazardous materials governed by TQ requirement IP025 and non-hazardous items packaged per ASTM D3951 unless superseded by DLA standards. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Transportation must utilize traceable freight methods, excluding parcel post, and all shipments must be marked with the provided government routing and freight information. The required delivery date is August 4, 2026, with no flexibility allowed on delivery timeline or quantity, and acceptance occurs at the destination point.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336360
New
DIBBS
TARPAULIN EXTENSION
Solicitation # SPE7L4-26-T-5983
This contract pertains to the procurement of a tarpaulin extension with NSN 2540-01-723-0399, quantity of one unit, to be delivered within ten days of contract award under solicitation SPE7L4-26-T-5983. Delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards including ASTM D3951. Packaging must adhere strictly to DLA’s packaging requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous materials packaged according to TQ requirement IP025 if identified per FED-STD-313. Ozone-depleting chemicals are strictly prohibited in the product or its manufacturing process, and any substitute chemicals must be pre-approved unless explicitly authorized. The unit of issue is each (EA), and palletization must follow DLA guidelines. The destination is W8000V, Prince Sultan Air Base, Saudi Arabia, with shipment logistics governed by DLAD Proc Notes C19 and C20. The required delivery date is July 30, 2026, and the item is intended for U.S. Forces maintenance use. The contract excludes any set-aside provisions and falls under NAICS code 336360 for defense manufacturing.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7L4-26-T-5980
The contract pertains to the procurement of a single unit of a pulley with a groove, identified by NSN 3020-01-338-4624 and part number SC-108, under solicitation SPE7L4-26-T-5980. Delivery is required within 20 days from the award date, with FOB origin terms, and the item must be delivered to Fort Eustis, Virginia, identified by the shipping address W26RK4, Building 1610, Patch Rd, AWCF SSF. The quantity variance is strictly zero percent, meaning exactly one unit must be supplied. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering to MIL-STD-129 for marking and labeling. DLA’s Master List of Technical and Quality Requirements supersede any conflicting standards, and palletization must meet the specific packaging guidelines outlined in RP001. Shipments must use traceable methods only, excluding parcel post, and are tied to a government tracking number and project code TP 3. The contract specifies the unit of issue as each and the total price for one unit. The required delivery date is July 24, 2026, and the purchase request number is 7017643799. The point of contact is Anna-Rachelle Betts, and inquiries should be directed to her at the provided email and phone. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, under NAICS code 333613 for the Department of Defense's Combat Vehicles and Armament division. All technical and quality requirements referenced through R or I numbers in the DLA Master List govern the product’s conformance, and the Government maintains administrative controls for tracking and disposition using the designated DIC, DIST, and ADV codes. The vendor, Columbus Jack Corporation, is expected to fulfill all specifications, packaging, and delivery obligations to avoid rejection or non-compliance.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
GEAR, WORM WHEEL
Solicitation # SPE7L4-26-T-5982
The contract is for one worm wheel gear, identified by NSN 3020-01-087-5122 and part number 27021-1280, under solicitation SPE7L4-26-T-5982, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. The item must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must follow MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking code, and the gear must be packaged in a Type 1, 2, or 3, Class B or C, Style 1 bag per MIL-B-117. Delivery is required within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination. The item must be shipped via the fastest traceable means, explicitly excluding parcel post, to the receiving address in Silverdale, Washington, with a required delivery date of July 28, 2026. All shipments must adhere to specified palletization and container instructions, and the point of contact for inquiries is Anna-Rachelle Betts. The contract includes government-only identifiers and project codes for tracking and administrative purposes.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
DIBBS
VALVE, RELAY, AIR PRESSU
Solicitation # SPE7L4-26-T-5984
This contract covers the procurement of a valve, relay, air pressure, identified by NSN 2530-01-470-5919, with a required quantity of three units to be delivered within 20 days of award. The item must strictly conform to the source-controlled drawing specification SPE7L4-26-T-5984 and the referenced technical drawing revision D dated 11/21/2023, with part number 12422042, and is supplied exclusively by WABCO USA LLC under part number 472 195 017 0. Manufacturing requires a metal casting process and compliant tooling, with all components subject to source control and no deviations permitted without formal approval. The contract mandates adherence to DLA packaging standards MIL-STD-2073-1E and MIL-STD-129, with special marking code ZZ, palletization compliant with DLA requirements, and shipment via traceable freight only—parcel post is prohibited. Delivery is FOB origin to Fort Sill, Oklahoma, with inspection and acceptance occurring at the destination. The item is classified as a critical application and must not contain ozone-depleting chemicals, mercury or mercury-containing compounds except under strictly defined exceptions, and must comply with all applicable technical and quality requirements referenced in the DLA Master List. All offers require certification of conformance unless waived by a quality assurance letter, and configuration changes must follow formal engineering change proposal procedures. The contract includes restricted data provisions and requires compliance with defense information handling protocols.
Motor Vehicle Brake System Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7L4-26-T-5971
This contract is for a single cable assembly identified by NSN 5995-01-623-4318, with a delivery requirement of five days after award. The solicitation, issued under number SPE7L4-26-T-5971, was posted on August 4, 2026, with responses due by August 17, 2026, and falls under NAICS code 334419 for other electronic component manufacturing. The contract is administered by the Department of Defense through the LSO Combat Vehicles and Armament office, with performance required at Holloman AFB, New Mexico, 88330-7706. All technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition size and timing of solicitation amendments. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331 Table 1, or another zero-based sampling plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0, and unspecified attributes are treated as major unless otherwise stated. Zero non-conformances are required in sample lots unless the contract specifies otherwise. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons, including employees and subsidiaries, without prior government authorization. Access to this controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and questionnaire, and been formally approved by DLA. Non-accepted supplies must be stripped of government identification prior to return.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CENTERING
Solicitation # SPE7L4-26-T-5975
The contract pertains to the procurement of one centering bolt, identified by NSN 5306-01-163-4851 and part number 10512246, under solicitation SPE7L4-26-T-5975, with a required delivery in five days FOB origin. The item must comply with all technical and quality requirements stipulated in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines, and all labeling must include the correct Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at the destination, with zero non-conformances mandated in sampling unless otherwise stated, using MIL-STD-1916 or comparable zero-based plans, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The delivery address and mark-for location are identical, designated for the PM Stryker Log Demo GDLS facility in Sterling Heights, Michigan, and shipment must occur via the fastest traceable means, excluding parcel post. The contract mandates strict adherence to government protocols for covered defense information and includes specific administrative codes for government use, with the original required delivery date set for August 4, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details