Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE ASSEMBLY, SPEC

Active
SPE4A6-26-T-05GKFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a single cable assembly with part number EB4210-35-300A and NSN 5995-01-622-6727, issued under solicitation SPE4A6-26-T-05GK as a total small business set-aside. The item must be manufactured and delivered in full compliance with stringent technical and quality mandates referenced from the DLA Master List of Technical and Quality Requirements, including sampling procedures aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sample lots unless otherwise stated. The cable assembly must be free of intentional mercury or mercury compounds, except in approved exceptions such as functional batteries, fluorescent lights, or specific instrument components mandated by NAVSEA, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Preservation, packaging, and marking must also adhere to the mercury prohibition under IP056, and all packaging shall conform to MIL-STD-2073-1E and MIL-STD-129 for labeling and marking, with no special marking required. The item is to be delivered FOB origin within 155 days to the designated receiving warehouse in Tracy, California, with no quantity variance permitted. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the contract falls under Covered Defense Information requirements. Shipping and transportation instructions reference DLAD Proc Notes C19 and C20, with the delivery deadline set for May 12, 2027, and a need ship date of December 20, 2026. All performance and compliance obligations are subject to the version of the DLA Master List effective on the solicitation issue date.

General Info

Procure one NSN 5995-01-622-6727 cable assembly by July 17, 2026, via DIBBS under DoD contract.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(1)

SPE4A6-26-T-05GK.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Kory Walker
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY,SPEC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SPE4A6-26-T-05GK
SECTION B
BRANTNER AND ASSOCIATES, INC. 4EAN5 P/N EB4210-35-300
ELECTRIC BOAT CORPORATION 96169 P/N EB4210-35-300A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017271954 0001 EA 1.000
NSN/MATERIAL:5995016226727
DELIVERY (IN DAYS):0155
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
SPE4A6-26-T-05GK
SECTION B
PR: 7017271954 PRLI: 0001 CONT’D
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:12/20/2026 Original Required Delivery Date:05/12/2027
SPE4A6-26-T-05GK NSN/Part Number: 5995-01-622-6727 Quantity: 1 EA Purchase Request: 7017271954QTY: 1 Delivery: 155 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
MODULATOR, TRANSMISSIONThis solicitation, identified as SPE7LX-26-R-0048, is a total small business set-aside for the acquisition of a Modulator, Transmission (NSN 2520-01-498-9279) under an indefinite-delivery/indefinite-quantity (IDIQ) firm-fixed-price contract. The effort is managed by the Department of Defense’s Strategic Acquisition Program Directorate through DLA Land and Maritime, with delivery orders to be issued exclusively by DLA Weapons Support in Columbus, Ohio. The contract contemplates an annual volume of approximately four orders, with a total estimated value ranging from $1,696.11 to $1,929,080.16, though no specific unit pricing is provided in the pricing spreadsheet. Offers must be submitted electronically via DIBBS or email to Michael Allen at Michael.2.Allen@dla.mil by 3:00 PM local time on August 21, 2026; faxed or hand-carried proposals are prohibited. Respondents must complete and submit all required attachments including the Product Item Description, pricing spreadsheet, subcontracting plan, Small Business Participation Certification Document, Capability Assessment Package, and its companion guide, all in approved electronic formats. Proposals must include the authorized representative’s name, title, phone, and email, and must clearly mark any Source Selection Information. Offerors must also complete all representations and certifications, including verification of Small Business status, Unique Entity Identifier, and CAGE Code, and must affirmatively declare any socioeconomic program participation. The product must be manufactured and packaged in full compliance with MIL-STD-2073-1E and MIL-STD-129R, applying Special Packaging Instruction AK14989279 Revision A, which mandates a specific layered packaging configuration using EC, BS, and ED codes with vacuum sealing and heat sealing requirements, and military-level preservation as defined in Method 42. Markings must include the ZZ code for special requirements and the phrase “First Article Exhibits – Do Not Post to Stock” on first article units. Inspection and acceptance occur at origin unless a Factory Acceptance Test is required, in which case acceptance shifts to destination; final authority for acceptance rests with the Government. Contractors must comply with stringent cybersecurity requirements including CMMC certification at an appropriate level, full implementation of NIST SP 800-171 controls, and adherence to DFARS
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThis contract pertains to the procurement of a single push switch identified by NSN 5930-01-497-1031 and part number 800HA1C2E4J3L2N2(GG)16, with a requirement for delivery within twenty days to the USS VERMONT SSN 792 at FPO AP 96694-4300. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the switch or its components, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents explicitly authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and equipped with a secondary containment boundary compliant with NAVSEA 5100-003D. Packaging and preservation must adhere to MIL-DTL-28786 for switches, while marking and shipping must follow MIL-STD-129 and MIL-STD-2073-1E standards, with no special marking required. The switch is subject to zero variance in quantity, with inspection and acceptance occurring at the destination. All requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. The buyer’s technical and quality history confirms validation of the part number and updated technical oversight documentation. Delivery is FOB destination, and transportation logistics are governed by DLAD procedures C19 and C20. The contract, issued under solicitation SPE7M8-26-T-5198, is for a federal procurement through the Department of Defense’s Electrical Devices Division, with a response deadline of July 22, 2026, and an original required delivery date of July 1, 2026.
ELECTRICAL DEVICES DIV

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThis contract is for the procurement of a single push switch, identified by NSN 5930-01-497-1033 and part number 800HA1C1E4J3L2N2(GW)16, under solicitation SPE7M8-26-T-5199. The item must be delivered FOB destination within 20 days of contract award, with no tolerance for quantity variance. All packaging, preservation, and marking must conform to MIL-STD-2073-1E and MIL-DTL-28786 for switches, with marking per MIL-STD-129 and no special labeling required. The product is subject to strict restrictions on mercury and mercury-containing compounds, which are prohibited from intentional addition or direct contact with the hardware unless specifically exempted, such as functional uses in batteries, fluorescent lamps, instrumentation, or weapon systems, in which case secondary containment and shock-proof design are mandatory per NAVSEA 5100-003D. Delivery is designated for the USS VERMONT SSN 792 at FPO AP 96694-4300, with transportation governed by DLAD PROC NOTES C19 and C20. The required delivery date is July 1, 2026, and the contract incorporates all technical and quality requirements referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements. The unit of issue is each (EA), priced at $1.00, with inspection and acceptance occurring at the destination. All supplies must comply with DoD procurement standards and hazardous material shipping protocols.
ELECTRICAL DEVICES DIV

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThe contract specifies the procurement of a single push switch, identified by NSN 5930-01-281-1575 and part number 99-712-6B4-16100, under solicitation SPE7M8-26-T-5200, with a delivery requirement of 20 days FOB destination. The item must comply with stringent packaging and preservation standards outlined in MIL-DTL-28786 and MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containerization, all marked in accordance with MIL-STD-129 without special markings. Acceptance occurs at the destination with zero tolerance for non-conformances under sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Mercury or mercury-containing compounds are strictly prohibited in direct contact with the hardware except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable fluorescent lamps and instruments requiring shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Delivery is directed to USS GEORGE WASHINGTON CVN 73 at FPO AP 96607 under a vessel shipment protocol, with transportation governed by DLAD procedural notes, and the supplier must adhere to all DLA packaging, quality, and hazardous materials regulations. The contract includes a fixed quantity of one unit with no variance permitted, and the original required delivery date is set for July 1, 2026.
ELECTRICAL DEVICES DIV

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
MAINTENANCE PLATFOR
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICALThis contract solicitation is for 69 units of LEAD, ELECTRICAL with the NSN 5995-00-879-1666 under solicitation number SPE4A6-26-T-05GJ, issued by the Defense Logistics Agency’s ASC Commodities Division. The requirement is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses and carries a delivery deadline of 169 days after award. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, requiring strict adherence to procurement notes related to qualification. Export-controlled technical data is involved, subject to ITAR or EAR regulations, with distribution restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on export-controlled data handling, and have been formally approved by DLA to access such data. All foreign nationals, including those employed by U.S. companies, are subject to these restrictions. The point of contact for inquiries is Lakisha Atkinson, with response deadlines set for July 17, 2026, and performance location specified as Greensboro, NC, 27409.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICALThis contract, issued under solicitation SPE4A6-26-T-05BD by the Department of Defense’s ASC Commodities Division, pertains to the procurement of a commercial-grade electrical component identified by part number BAC-J40D12-48 and NSN 6150-00-993-3927, with a required quantity of 186 units. The item is classified as a critical application and must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with all units shipped FOB origin and inspected and accepted at destination. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified, and critical attributes require verification levels corresponding to AQLs of 0.1. Approved sources include Janco Corp, R&B Electronics Inc, and Circuit Systems Co., each with their respective part number designations. The contract mandates strict configuration control, removal of government identification from non-accepted materials, and physical marking of bare items. Delivery is due within 50 days of contract award, with an original required delivery date of September 29, 2026, and a need ship date of September 6, 2026. The unit price is $186.00 per each, totaling $34,596.00, with no variance allowed in quantity. All items must be labeled and documented in accordance with DLA directives, and shipment must be directed to DLA Distribution Jacksonville at the specified parcel post and freight address.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract specifies the procurement of a single LIGHT, INDICATOR unit with NSN 6210-01-466-5417 under solicitation SPE4A6-26-T-04YX, requiring delivery within 20 days FOB destination with no variance permitted in quantity. All supplies must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. The item must be packed in accordance with RP001 and palletized as defined, and shipped via traceable means without parcel post to the designated FPO address for USS HOPPER DDG 70. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with sampling to follow MIL-STD-1916 or ASQ H1331 using zero non-conformances unless otherwise stated, and attributes are classified with verification levels VII, IV, II or AQLs of 0.1, 1.0, 4.0 respectively. Mercury and mercury-containing compounds are prohibited unless used functionally in approved devices such as batteries, fluorescent lights, or instrument controls, and portable devices containing mercury must include a second containment boundary per NAVSEA 5100-003D. The delivery is tied to a required date of July 6, 2026, and must be furnished to DRS Naval Power Systems Inc with specified part numbers. The contract mandates strict adherence to government procurement protocols, including inspection and acceptance at destination, and is overseen by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334419
New
Federal
MARKET SURVEY SOURCES SOUGHT: QUINT POWER Series Industrial Power Supply
6973GH Franchise Acquisition Svcs

POSTED

about 20 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
Federal
FILTER ASSEMBLY
Naval Research Laboratory

POSTED

about 20 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334419
New
DIBBS
RF Cable Assembly ManufacturingThe contract requires end-to-end manufacturing of RF cable assemblies adhering to strict military specifications, encompassing all stages from production and testing to final packaging, fully aligned with Defense Logistics Agency requirements. Work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with the facility operating under the oversight of the ASC Commodities Division within the Department of Defense. The NAICS code 334419 indicates the scope involves other electronic component manufacturing, specifically tailored to defense-grade RF applications. As a subcontract opportunity, all offerings must meet stringent quality and compliance benchmarks expected for military-grade electronics, including rigorous performance validation and documentation standards. The solicitation was posted on July 16, 2026, with a hard deadline for responses set for July 24, 2026, leaving a limited window for qualified contractors to submit bids. While no set-aside designation or point of contact is provided, interested parties must access the official DIBBS portal via the specified link to obtain full technical requirements and submission instructions. The contract demands complete traceability, adherence to military standards, and the ability to deliver certified assemblies within the required timeline, making experience in defense electronics manufacturing and proven compliance with DLA logistics protocols essential for eligibility.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332312
New
DIBBS
Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.
Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 483112
New
DIBBS
Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.
Deep Sea Passenger Transportation

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.
Machine Shops

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335931
New
DIBBS
Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 29 days
View Details