Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CASE

Active
SPE8E7-26-T-3767Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as SPE8E7-26-T-3767, is a solicitation by the Department of Defense for the procurement of 56 units of Tactical Lighting Solutions, LLC part number LB2-502F-E, associated with NSN 6230015282956. The delivery is required within 146 days, with a need ship date of February 8, 2027, and an original required delivery date of February 26, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement mandates strict adherence to DLA Master List technical and quality requirements, specifically regarding packaging and labeling. Packaging must comply with MIL-STD-129 and ASTM D3951, or TQ requirement IP025 if the materials are deemed hazardous. Additionally, the contract specifies that any government identification must be removed from non-accepted supplies and that inspection and acceptance will occur at the destination.

General Info

DoD procurement of 56 Tactical Lighting units for delivery by February 2027.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE8E7-26-T-3767 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUSA
Contacts
Kelly Mitchell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CASE
CASE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
UNIT OF ISSUE IS EACH
TACTICAL LIGHTING SOLUTIONS, LLC 1S2Q8 P/N LB2-502F-E
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018160196 0001 EA 56.000
NSN/MATERIAL:6230015282956
DELIVERY (IN DAYS):0146
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE8E7-26-T-3767
SECTION B
PR: 7018160196 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/08/2027 Original Required Delivery Date:02/26/2027
SPE8E7-26-T-3767 NSN/Part Number: 6230-01-528-2956 Quantity: 56 EA Purchase Request: 7018160196QTY: 56 Delivery: 146 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-26-T-6402
This contract, identified as SPE7M8-26-T-6402, is for the procurement of seven pressure switches under NSN 5930000637779, specifically part number ZH4-5 from Ellis Watts International, LLC. The item is designated as a critical application item. Delivery is required within 68 days of award, with a need ship date of March 3, 2026, and a required delivery date of March 17, 2026. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, including RP001 and MIL-STD-129 for marking and labeling. Packaging must follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 if the material is deemed hazardous. Inspection and acceptance will take place at the destination. The contract also incorporates technical and quality requirements from the DLA Master List and requires the removal of government identification from any non-accepted supplies.
ELECTRICAL DEVICES DIV

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
VALVE, FLOW CONTROL
Solicitation # SPE7MC-26-T-247V
This contract is for the procurement of one flow control valve, identified by NSN 4820-99-840-6192, for the Defense Logistics Agency. The item is designated as a critical application item and must be delivered FOB destination to the USS Michael Monsoor DDG 1001 within 20 days. The required delivery date is set for August 14, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. There are explicit prohibitions against the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. All shipments must be sent via the fastest traceable means, and parcel post is prohibited.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
VALVE, STOP AND STOP
Solicitation # SPE7M0-26-T-071S
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of one stop and stop valve under NSN 4820-01-486-4214. The contract is open for full and open competition with a delivery requirement of five days after receipt of order. Performance is centered in Portsmouth, and the procurement is governed by NAICS code 332919. Strict compliance is required regarding the prohibition of Class I ozone depleting chemicals, and any substitutes must be submitted for approval. The contract incorporates DLA packaging and quality requirements and is subject to rigorous export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with valid US/Canada Joint Certification Program certification and completed export-control training.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
NOZZLE, FIRE EQUIPMENT
Solicitation # SPE8E9-26-T-3629
This solicitation, issued by the Department of Defense under solicitation number SPE8E9-26-T-3629, is for the procurement of 82 fire hose nozzles, size 1.5 inches, identified by NSN 4210-00-392-2943. The contract is designated as a Total Small Business Set-Aside and is categorized as a commercial item. Delivery is required within 158 days after the order is placed, with the place of performance located in New Cumberland, Pennsylvania. The agreement incorporates several technical and quality requirements, including DLA packaging standards, source approval request documentation, and the removal of government identification from non-accepted supplies. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional components like batteries or sensors as specified by NAVSEA. The procurement is managed by the Construction and Equipment MRO Service under NAICS code 332919.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
VALVE, VACUUM
Solicitation # SPE7L4-26-T-6713
This contract is for the procurement of 85 vacuum valves, identified by NSN 4820016026085 and Caterpillar part number 507-0644. The order is issued by the Department of Defense under solicitation SPE7L4-26-T-6713, with a required delivery date of January 13, 2027, and a delivery window of 120 days. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination. The items must be delivered to DLA Distribution San Joaquin in Tracy, California. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. The contract also mandates compliance with the DLA Master List of Technical and Quality Requirements and specifies the removal of government identification from any non-accepted supplies.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-247X
This contract is for the procurement of seven bronze safety relief valves with a set pressure of 65 PSI, identified by NSN 4820-01-168-1872. These are designated as critical application items, with approved part numbers from Emerson Automation Solutions and Dante Valve Company. The manufacturing process requires metal casting and associated tooling, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds except where functionally required. The order is managed by DLA Distribution San Joaquin with a delivery timeframe of 194 days, targeting a need date of March 28, 2027. Shipping is FOB Origin with inspection and acceptance occurring at the destination in Tracy, California. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001.
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
PLUG, TUBE FITTING, THRE
Solicitation # SPE7M3-26-T-8802
This contract is a solicitation for the procurement of three threaded tube fitting plugs, identified by NSN 4730-01-464-1307. The order specifies parts from Cummins Inc, specifically part numbers 3282266 and 5528109. Delivery is required within 20 days after receipt of order, with a required delivery date of September 4, 2026. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking. Shipping is set as FOB Destination, with the final delivery point located at Yokota Air Base in Japan. Inspection and acceptance will occur at the destination.
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
Federal
VALVE,FLOW CONTROL
Solicitation # SPRPA126QXB73
This solicitation, numbered SPRPA126QXB73, is issued by the Department of Defense through the DLA Aviation office in Philadelphia for the procurement of flow control valves for the KC130-J System. The requirement is designated as a Critical Application Item and is being processed under Emergency Acquisition Flexibilities. The contract falls under NAICS code 332919 and requires adherence to ISO9001 quality standards, with markings following MIL-STD-130 and packaging conforming to MIL-STD 2073. The procurement includes a warranty for noncomplex supplies lasting 365 days, with a 45-day window for reporting defects after discovery. It incorporates various federal regulations, including the Buy American-Free Trade Agreements and the Balance of Payments Program. The solicitation was posted on September 2, 2026, with a response deadline of September 18, 2026. Primary contact for this action is Lawrence Eaddy.
Pa DLA Aviation At Philadelphia

POSTED

about 11 hours ago

DEADLINE

in 16 days
View Details
NAICS: 332919
New
Federal
STEM
Solicitation # N0010426QFE55
Solicitation N00104-26-Q-FE55 is a firm-fixed-price request for the procurement of a stem used in a critical shipboard system. Due to the high risk associated with material failure, the item is designated as Special Emphasis material (Level I, Quality Assured), requiring strict adherence to quality control procedures, full traceability, and a zero-defect acceptance policy. The procurement is a 100 percent small business set-aside, with an offer receipt deadline of September 8, 2026. Award is based on a trade-off process where past performance, evaluated via the Supplier Performance Risk System, is considered more important than price. Technical requirements mandate that the stem be manufactured according to Naval Sea Systems Command Drawing 4558766 and material specification QQ-N-286. The contractor must maintain a quality system compliant with ISO 9001 and provide comprehensive objective quality evidence, including ultrasonic inspections and slow strain rate tensile tests performed by approved laboratories. All certification data must be submitted and accepted via Wide Area Workflow (WAWF) by the Portsmouth Naval Shipyard prior to shipment. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073, and the contractor is prohibited from intentionally adding mercury to the hardware. The contract is rated DO under the Defense Priorities and Allocations System for national defense use.
Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # N0010426QND63
This contract pertains to the procurement of a 1 1/2 inch ball valve designated as SPECIAL EMPHASIS material (Level I, Quality Assured) for critical shipboard systems, where failure could lead to catastrophic consequences including loss of life or vessel. The valve must conform strictly to Naval Ship Systems Command Drawing 845-4558773 and related assembly drawings, with specific material requirements including ASTM-B369 for the body, MIL-C-15726 for the bonnet, QQ-N-286 for the stem, and SAE-AMS-6931 for the ball. Alternative materials such as Aluminum Alloy 356.0-T6 for the handwheel are permitted under defined conditions. Rigorous testing and certification protocols are mandated, including liquid penetrant inspection, ultrasonic testing, pressure tests, slow strain rate tensile tests, and weldability evaluations, with mandatory compliance to military and industry standards such as MIL-STD-792, FED-STD-H28, and ISO-9001. Traceability is strictly enforced from raw material through to finished component via unique heat-lot markings, requiring permanent, legible identification on all parts and full documentation of chemical and mechanical properties. All certifications must be positive, unqualified, and directly linked to the physical item via traceability numbers, with transcription strictly prohibited. The contractor must operate under a certified quality system compliant with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, and is subject to Government Quality Assurance at source with mandatory coordination with the Defense Contract Management Agency. Welding and brazing must adhere to S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with prior approval of procedures and qualification data required, and repair welding is explicitly forbidden on QQ-N-286 material. Thread lubricants containing molybdenum disulfide are prohibited; A-A-59004 anti-galling compound must be used instead. Surface finish requirements for the ball are detailed, specifying polishing techniques using SUPFINA paste to achieve a matte dull finish between RHR 12–16, and seal surface waviness must not exceed 0.0005 inches per inch of spherical surface. All fasteners must be marked
Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, HOSE TO BOSS
Solicitation # SPE7M0-26-T-070H
This contract is for the procurement of one hose to boss elbow, identified by NSN 4730015979358 and Daimler Truck North America part number PH 1695HB64. The order is managed under solicitation SPE7M0-26-T-070H for the Department of Defense. Delivery is required within five days after receipt of order, with a required delivery date of September 2, 2026. The shipment is designated as FOB Origin, with inspection and acceptance occurring at the destination in Kaiserslautern, Germany. The supplier must adhere to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and comply with the DLA Master List of Technical and Quality Requirements. A critical environmental restriction prohibits the use of Class I ozone-depleting chemicals in the manufacture or delivery of the item. All packaging and palletization must follow the RP001 guidelines to ensure compliance with government procurement standards.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-8793
This contract, identified as SPE7M3-26-T-8793, is a solicitation from the Department of Defense Fluid Handling Division for the procurement of one straight PI adapter, part number 6-055-145 by Henry Technologies, Inc. The item is identified by NSN 4730-01-615-7883 and is destined for the USS Essex LHD 2. Delivery is required within 20 days after the order, with an original required delivery date of August 13, 2026. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It includes specific environmental restrictions, prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Inspection and acceptance will take place at the destination, and shipping must be conducted via the fastest traceable means, specifically excluding parcel post.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-4205
This contract, identified as SPE8E5-26-T-4205, is for the procurement of eight plastic sheets under National Stock Number 9330-01-550-5790, provided by Fairbanks Morse, LLC. The delivery is set for 167 days after order, with a required delivery date of February 26, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specified functional exceptions. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the handling of covered defense information and hazardous materials.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
HEAD, WATER DEMINERALIZ
Solicitation # SPE8E8-26-T-5502
This contract, identified by solicitation number SPE8E8-26-T-5502, is for the procurement of 12 units of water demineralizer ion exchange heads, part number 7426B-01 from Howell Laboratories Inc. The items are classified under NSN 4610-01-691-0729. Delivery is required within 167 days, with a need ship date of March 1, 2027, and an original required delivery date of March 16, 2027. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. Additionally, the contract incorporates various technical and quality requirements from the DLA Master List and notes that covered defense information potentially applies.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327215
New
DIBBS
SHEET, NONMETALLIC, PROT
Solicitation # SPE8E5-26-T-4234
This contract is for the procurement of 41 units of nonmetallic protective sheets, identified by NSN 9390015570832. The order is associated with part numbers from General Dynamics Land Systems and Clear Defense LLC. Delivery is required within 167 days after order, with a required delivery date of February 24, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling. Packaging must follow ASTM D3951 for non-hazardous materials or specific TQ requirement IP025 for hazardous materials. Inspection and acceptance will take place at the destination, and the contract specifies that surplus supplies are not acceptable for this particular national stock number.
Glass Product Manufacturing Made of Purchased Glass

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CIRCULATING
Solicitation # SPE8E7-26-T-3784
This contract is for the procurement of 45 circulating fans, identified by NSN 4140-01-663-5974 and Hewlett-Packard part number 654752-001. The order is managed under solicitation SPE8E7-26-T-3784 with a required delivery date of May 18, 2027, and a need ship date of March 1, 2027. Delivery is set for 167 days after the order, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The supplier must adhere to specific technical and quality requirements outlined in the DLA Master List, including documentation for source approval and the removal of government identification from non-accepted supplies. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. All shipments are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-5509
This solicitation, numbered SPE8E8-26-T-5509, is issued by the Department of Defense for the procurement of 49 electrical immersion type heating elements under NSN 4520-01-579-9647. The contract is managed by the DDSP New Cumberland Facility, with a required delivery timeframe of 47 days after receipt of order. The procurement is subject to specific technical and quality requirements as outlined in the DLA Master List, including packaging requirements under RP001 and the removal of government identification from non-accepted supplies per RQ011. Interested parties must submit responses by September 14, 2026, for performance at the New Cumberland location.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
NOSE, RESCUE SEAT
Solicitation # SPE8E6-26-T-4444
This contract, identified as SPE8E6-26-T-4444, is for the procurement of three units of a rescue seat nose, part number K26-1083-1, manufactured by Kaman Aerospace Corp. The item is classified as a critical application item under NSN 4240010825039. Delivery is required within 167 days, with a need ship date of March 1, 2027, and an original required delivery date of June 8, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement incorporates several strict technical and quality requirements, including DLA packaging standards RP001 and MIL-STD-129 for marking and labeling. Compliance with Covered Defense Information (CDI) and Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is mandatory. Inspection and acceptance will take place at the destination. Packaging must adhere to ASTM D3951 unless the material is deemed hazardous, in which case requirement IP025 applies.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
BODY, REGULATOR, BREATHI
Solicitation # SPE8E6-26-T-4485
This solicitation is for the procurement of four units of a breathing apparatus regulator body, identified by NSN 4220-01-424-4220. The contract is issued by the Department of Defense through the Defense Logistics Agency for the New Cumberland facility, with a required delivery timeframe of 167 days after receipt of order. The contract mandates strict adherence to cybersecurity and export control regulations, requiring CMMC Level 2 certification and compliance with ITAR or EAR guidelines for the handling of technical data. Additionally, the supplier must follow DLA packaging requirements and ensure the removal of government identification from any non-accepted supplies. The material is noted to have no shelf life requirement.
All Other Rubber Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332321
New
DIBBS
LAMP, LIGHT EMITTING DI
Solicitation # SPE8E7-26-T-3779
This contract is for the procurement of 204 light emitting diode lamps, identified by NSN 6210016194271 and part number L-LW36 from L.C. Doane Company. The agreement is a total small business set-aside under solicitation SPE8E7-26-T-3779, with a required delivery date of January 26, 2027, and a delivery window of 110 days. Shipping is FOB origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases defined by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the handling of covered defense information.
Metal Window and Door Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331492
New
DIBBS
SOLDER, LEAD-TIN ALLOY
Solicitation # SPE8E5-26-T-4180
This contract, identified as SPE8E5-26-T-4180, is for the procurement of 43 pounds of lead-tin alloy solder under NSN 3439-01-420-2775. The order is associated with Alpha Metals Inc and Northrop Grumman Systems Corporation. Delivery is required within 167 days, with a need ship date of March 1, 2027, and an original required delivery date of May 25, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement includes a quantity variance of plus or minus 10 percent, with both inspection and acceptance occurring at the destination. Packaging must adhere to DLA requirements, specifically RP001 and MIL-STD-129, with hazardous materials following TQ requirement IP025 or non-hazardous materials following ASTM D3951. The contract incorporates various technical and quality requirements from the DLA Master List and specifies the removal of government identification from any non-accepted supplies.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDING
Solicitation # SPE8E6-26-T-4475
This solicitation, issued by the Department of Defense for the DDSP New Cumberland Facility, is for the procurement of 58 containers of carbon-steel welding electrodes. The required material is specified as Lincoln Electric Holdings part number ED032565, featuring a 1/8 inch diameter and 14 inch length, with each container weighing 10 pounds. This is designated as an exact product procurement, meaning only the specified manufacturer and part number are acceptable to meet government needs. The contract is governed by the DLA Master List of Technical and Quality Requirements and includes specific mandates for packaging and the removal of government identification from non-accepted supplies. The material has no shelf life requirement. Delivery is expected within 167 days after receipt of the order. The solicitation was posted on September 2, 2026, with a response deadline of September 14, 2026, under NAICS code 333992.
Welding and Soldering Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
RECEIVER, LIQUID REF
Solicitation # SPE8E8-26-Q-0468
This contract is for the procurement of 39 units of a liquid receiver, identified by NSN 4130-01-574-7504 and Carrier Corp part number 65-60036-02. The agreement is established as a firm fixed price contract with a delivery requirement of 90 days after order. Inspection and acceptance will occur at the destination, and the shipping terms are FOB Origin. The supplier must adhere to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling, with DLA Master List technical and quality requirements taking precedence. Delivery is designated for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract also notes that covered defense information potentially applies and requires the removal of government identification from any non-accepted supplies.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339999
New
DIBBS
BALLOON, TARGET
Solicitation # SPE8E6-26-T-4477
This contract, identified as SPE8E6-26-T-4477, is a solicitation from the Department of Defense for the procurement of 21 target balloons. The items are described as yellow, tumbling, adrift balloons with nominal dimensions of 60 inches for length, height, and width. Each unit must include a 6-inch float and a 50-foot handling rope with a 1/4-inch diameter. The specific part number associated with this requirement is Killer Lemon, manufactured by Geodata Systems Management Inc. The delivery is set for 32 days after order, with a required delivery date of November 2, 2026, shipping FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. The contract specifies a zero percent quantity variance and designates both the inspection and acceptance points at the destination.
All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details