Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CENTER, LATHE

Active
SPE8E9-26-T-3187Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of seven center lathe units with NSN 3460-01-109-4773 under solicitation SPE8E9-26-T-3187, issued by the Department of Defense through the Construction & Equipment MRO Service I. Delivery is required within 20 days of award, FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the destination. Packaging must comply fully with MIL-STD-2073-1E, MIL-PRF-23199E, and MIL-STD-129 for marking, and barcoding must adhere to ISO/IEC 16388. Palletization follows DLA packaging requirements, and shipment must use traceable freight methods, explicitly prohibiting parcel post. The delivery address is in Savannah, Georgia, and the item is supplied by CARO INC. DBA South Bend Lathe under part number CE1890. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with sampling protocols mandating MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, where critical, major, and minor attributes require verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may only be used to determine sample size. Mercury and mercury-containing compounds are strictly prohibited from direct contact with supplied hardware except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, weapon systems, or chemically specified reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The solicitation response deadline is July 30, 2026, with an original required delivery date of July 15, 2026, and primary contract oversight is managed by Matthew Kruc of DLA.

General Info

Seven center lathes procured by DoD, FOB origin, delivery in 20 days, strict packaging and barcoding, zero non-conformances required.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

333515 - Cutting Tool and Machine Tool Accessory ManufacturingView NAICS

Place of Performance

358 OELSCHIG DR, SAVANNAH, GA, 31408-9001, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E9-26-T-3187 for DLA Troop Support Construction & Equipment MRO

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CENTER,LATHE
CENTER, LATHE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CARO INC.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
"DLA does not have a bidset available"
SAMPLING:
CARO INC. DBA SOUTH BEND LATHE 55985 P/N CE1890
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE8E9-26-T-3187
SECTION B
PR: 7017522948 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017522948 0001 EA 7.000
NSN/MATERIAL:3460011094773
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION, PACKAGING, MARKING SHALL BE IAW MIL-PRF-23199E BAR CODING SHALL BE IAW ISO/IEC 16388
PARCEL POST ADDRESS:
FB6102
FB6102 165 LRS LGRDD
BLDG 1404 CP 912-966-8291
358 OELSCHIG DR
SAVANNAH GA 31408-9001
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB6102
FB6102 165 LRS LGRDD
BLDG 1404 CP 912-966-8291
358 OELSCHIG DR
SAVANNAH GA 31408-9001
US
M/F: (TCN) FB610261910476
RDD:
PROJ: TP 3
SUPP ADD: SIG: A
SPE8E9-26-T-3187
SECTION B
PR: 7017522948 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 15
DIC: A0A DIST: 01 ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/15/2026
SPE8E9-26-T-3187 NSN/Part Number: 3460-01-109-4773 Quantity: 7 EA Purchase Request: 7017522948QTY: 7 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333515
New
DIBBS
TREPANNING TOOL, MACHINThe contract calls for the procurement of 10 units of a trepanning tool, machine cutter, hole broaching, identified by NSN 3455011951701 and part number 11104 from Hougen Manufacturing, Inc., with delivery required within five days after award to the Letterkenny Army Depot in Chambersburg, Pennsylvania. The contract is issued under solicitation SPE8E5-26-T-3632, with a response deadline of July 31, 2026, and a required delivery date of July 17, 2026. The delivery is FOB origin, meaning the contractor assumes responsibility for packaging and loading the items at their facility, after which the government assumes all transportation risk and cost. The unit price is $4.73 per unit, totaling $47.30 for the base quantity. All items must be packaged per ASTM D3951, but compliance with the DLA Master List of Technical and Quality Requirements takes precedence over this standard. Packaging and labeling must strictly adhere to MIL-STD-129, including correct Unit of Issue and Quantity per Unit Pack, with palletization following RP001 DLA Packaging Requirements. Items must be shipped by the fastest traceable means, excluding parcel post, and marked with the designated freight and delivery address, including the government-specific marking code W25G1Q61940055. The contract incorporates multiple FAR and DFARS clauses governing safety, cybersecurity, procurement integrity, and compliance. Key clauses include 52.240-93 and 252.204-7012 for safeguarding covered defense information, 252.240-7997 for NIST SP 800-171 assessments, 252.223-7008 prohibiting hexavalent chromium, and 252.225-7048 for export-controlled item compliance. Inspection and acceptance occur at the destination, with the government assuming responsibility for both processes under FAR 52.246-2. Contractors must be registered in SAM, hold a valid UEI and CAGE code, and comply with all socioeconomic representation requirements if claiming small business status. Hazardous materials must be labeled per 29 CFR 1910.1200, and any exemptions must
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, PANELThe contract involves the procurement of two LIGHT,PANEL units under solicitation SPE4A6-26-T-85A1, with a delivery deadline of 171 days after contract award. The items must strictly conform to the source-controlled drawing referenced in the solicitation, and only approved sources listed on the drawing are initially authorized, though additional sources may be approved later. All items must comply with stringent technical and quality requirements referenced from the DLA Master List, and the use of Class I ozone-depleting chemicals is strictly prohibited, even if specifications previously allowed them, with any substitute chemicals requiring prior approval. The product is subject to export control under ITAR or EAR regulations, meaning technical data associated with it cannot be disclosed to foreign persons without authorization from the Department of State or Commerce, and contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DLA training, and receive specific approval to handle the controlled data. Item Unique Identification is not required per the service customer's request, and all supplies must adhere to DLA packaging standards and removal procedures for government identification on non-accepted items. The contracting activity is the ASC Commodities Division within the Department of Defense, with performance taking place in New Cumberland, PA, and inquiries should be directed to the primary point of contact, Chinh Le.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333515
New
DIBBS
INSERT, CUTTING TOOLThe contract is for the procurement of nine cutting tool inserts, identified by part number NTP-3L/K68 and NSN 3455011028634, under solicitation SPE8E5-26-T-3623 issued by the Defense Logistics Agency. Delivery is required within 20 days to the destination specified as Muwaffaq Salti Air Base in Jordan, with FOB destination terms and no variance allowed in quantity. All items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, using the specified packaging code and methods including dry preservation and no special marking. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The contractor, Kennametal Inc. Div Charlotte, must ensure all supplies are properly prepared, labeled, and shipped without government identification if not accepted. Transportation logistics follow DLAD Proc Note C19 and C20, with government use identifiers and freight details confirmed. The required delivery date is set for July 15, 2026, and the contract is classified under NAICS code 333515 for industrial machinery manufacturing.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333515
New
DIBBS
SUPPORT, AUXILIARY AThis contract, issued by the Defense Logistics Agency under solicitation number SPE8E5-26-T-3630, is for the procurement of one unit of a supported auxiliary component with NSN 3460-01-341-6141 and part number 1-232-5006, to be delivered FOB destination within 20 days. The item must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, with no special marking and palletization aligned to DLA packaging guidelines. Zero tolerance is enforced for quantity variance, and inspection and acceptance occur at the destination. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the supplied hardware except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-approved chemical reagents, with portable mercury-containing devices requiring shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are verified at predefined levels: VII for critical, IV for major, and II for minor. The contract incorporates technical and quality requirements from the DLA Master List, including covered defense information provisions, and mandates adherence to the DoD unit of issue standards. Delivery is directed to USS BULKELEY DDG 84 at FPO AE 09565 with vessel shipment procedures governed by DLAD Proc Notes C19 and C20, and the contracting officer’s point of contact is Ira Hedgepeth.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
Precision Milling Cutter SupplyThe contract requires the supply of a single side milling cutter identified by NSN 3455-01-420-0298, with strict adherence to military standards for full traceability, proper packaging, precise marking, and timely delivery. All deliverables must meet stringent quality and documentation requirements to ensure compatibility and reliability in defense applications. The procurement is classified as a subcontract under NAICS code 333515, indicating specialized manufacturing of metal cutting tools, and is being administered by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 15, 2026, with a firm response deadline of July 22, 2026, and all activities are linked to the official DIBBS platform for transparency and compliance.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 333515
New
DIBBS
INSERT, CUTTING TOOLThe contract is for the procurement of six inserts for cutting tools, identified by NSN 3455-01-412-4557, under solicitation number SPE8E5-26-T-3605, issued by the Defense Logistics Agency on behalf of the Department of Defense. The requirement is for delivery within ten days of award, with the place of performance specified as Fort Irwin, California, 92310-9986. The solicitation was posted on July 15, 2026, and responses are due by July 27, 2026. This procurement falls under NAICS code 333515, indicating it is for industrial machinery and equipment manufacturing. The contract incorporates all applicable technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions. DLA packaging requirements apply, and the provision for removal of government identification from non-accepted supplies is in effect. Additionally, Covered Defense Information potentially applies, and any contractor handling the materials must comply with related safeguards. Primary point of contact is Don Trachtman, reachable via email and phone listed in the contract data.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
New
DIBBS
FILE, ROTARYThis contract issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3601 pertains to the procurement of 10 units of a rotary component identified by NSN 3455-01-253-6024 and part number AA51171A-2A2B, with a unit price of $10.00 per item and a total contract value of $100.00. Delivery is required within 20 days of contract award, FOB origin, with no variance allowed in quantity and inspection and acceptance to occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, strictly adhering to DLA’s Master List of Technical and Quality Requirements which supersede any conflicting standards. Palletization must follow RP001: DLA Packaging Requirements for Procurement, and all shipments must utilize traceable freight methods—parcel post is explicitly prohibited. The delivery address is designated as FB6511, 3212 Annapolis St, JB Andrews MD 20762-5011, with a freight shipping contact number provided for coordination. The original required delivery date is July 13, 2026, and the contract includes specific government use identifiers including IPD, DIC, DIST, and ADV codes for internal tracking. The solicitation was posted on July 15, 2026, with a response deadline of July 27, 2026, and the North American Industry Classification System code is 333515. Point of contact for inquiries is Khue Nguyen at DLA, reachable by phone or email. Compliance with DLA’s technical and quality requirements as referenced in the Master List is mandatory and controls over any other cited specifications.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
New
DIBBS
CUTTER, MILLING, SIDEThe contract specifies the procurement of one milling cutter, side, identified by NSN 3455-01-420-0298, under solicitation SPE8E5-26-Q-0344, issued by the Defense Logistics Agency. The item is supplied by ILCO UNICAN CORP DBA WOLF SALES with part number P-X23MC under a firm fixed price arrangement with no tolerance for quantity variance. Delivery is required within 180 days after award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and cushioning, while markings adhere to MIL-STD-129 with no special codes. All packaging and palletization must follow DLA’s RP001 packaging requirements. The shipment is directed to USS OSCAR AUSTIN DDG 79 at FPO AE 09581, with transportation governed by DLAD procedural notes C19 and C20. Mercury and mercury-containing compounds are strictly prohibited unless exempted for specific applications such as batteries, lamps, sensors, or weapon systems, and even then must meet containment and safety standards per NAVSEA 5100-003D. Technical and quality requirements referenced are pulled from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type. The contract includes federal shipping and tracking identifiers including V21953, RDD 999, and TCN V219536182ER90, and requires compliance with all DLA procedures for defense supply chain logistics. The government-issued material need date is July 9, 2026, and the solicitation response deadline is July 22, 2026, with Devin Duffy as the designated point of contact.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 333515
New
DIBBS
CUTTER, MILLING, ANGLThe contract specifies the procurement of six milling cutters with a 2 3/4 inch diameter, 60-degree included angle, 1/2 inch face width, and a 1 inch hole diameter, all governed by technical standards including a Rockwell C62 to C66 hardness requirement for the cutting end and verification through testing. Each cutter must feature 18 to 20 teeth and comply with ASME B94.19 Revision A General 2 specifications. The contract strictly prohibits the intentional inclusion of mercury or mercury compounds in any supplied hardware, except for permitted exceptions such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with mercury-containing portable devices requiring shockproof construction and a secondary containment barrier as stipulated by NAVSEA 5100-003D. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requiring zero non-conformances unless otherwise directed. Packaging must adhere to MIL-STD-2073-1E with preservation method 30, no cleaning or drying, and wrapped in unspecified materials, with unit containers as EP and intermediate containers left undefined, all marked in accordance with MIL-STD-129 using special marking code 00–00 to indicate no special markings. Palletization follows DLA’s RP001 packaging requirements. The item, identified by NSN 3455-00-240-7322, is priced at a firm fixed rate with zero tolerance for quantity variance, delivered FOB origin within 60 days after contract award, and inspected and accepted at destination. Transportation and shipping instructions direct delivery to DLA Distribution Depot Oklahoma at Tinker AFB, with reference to DLAD procedural notes C19 and C20 for freight details. The contract, issued under solicitation SPE8E9-26-Q-0548, was posted on July 14, 2026, with responses due by July 21, 2026, and the material is required for delivery by June 16, 2027, under a
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

7 days ago

DEADLINE

in about 4 hours
View Details
NAICS: 333515
International
Fiber Laser Cutting System Supply and DeliveryThe contract specifies the supply and delivery of a high-precision enclosed fiber-laser cutting system designed for processing aluminum and copper components used in battery prototyping. The system must be an off-the-shelf product, with no modifications or customizations permitted, and must be guaranteed as non-counterfeit to ensure compliance with quality and safety standards. Delivery is required under DAP Ottawa terms per Incoterms® 2020, meaning the seller is responsible for all costs and risks until the equipment is placed at the designated destination in Ottawa, Canada, but the buyer assumes responsibility for unloading and local duties or taxes. The solicitation is issued under the NAICS code 333515, which corresponds to machine tool manufacturing, and is classified as a subcontract opportunity by the National Research Council of Canada, acting on behalf of the Government of Canada. The response deadline is set for July 27, 2026, and the contract is open for bidders to submit proposals through the Canada Buys platform. The place of performance is clearly identified as Ottawa, Canada, with no other locations accepted, and the equipment must be fully operational upon delivery to support immediate integration into ongoing battery development workflows.
National Research Council of Canada

POSTED

19 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
International
Fiber Laser Cutter for Aluminum and CopperThe National Research Council Canada is soliciting offers for a high-precision, enclosed fiber-laser cutting system designed to reliably cut aluminum and copper components for battery prototyping, with the requirement that the system have a fiber-type laser, a minimum power output of 3000W, and a 10:1 operational turn-down ratio from 10% to 100% power. The machine must feature a work area between 400x300mm and 635x635mm, a Z-axis of at least 50mm, and positioning precision of 0.1mm or better, with cutting speeds of at least 1 meter per minute on 4.064mm aluminum and 3.175mm copper. The system must include auto-tracking laser head technology, a fully enclosed operational area, an integrated gas assist system supporting oxygen, nitrogen, and air, and an active protection system to manage back-reflected laser energy. Delivery, installation, commissioning, and training are included in the scope, with the primary delivery point located at NRC Building U91, 2320 Lester Road, Ottawa, ON K1V 1S2. All submissions must comply with environmentally preferable packaging standards, excluding only packaging tape and specialized packaging for technical performance needs, and all shipments must include a packing slip with item, quantity, part numbers, description, contract number, CRN, and PBN, along with a transportation bill of lading accompanying the original invoice unless it is a collect shipment. Offers must be submitted electronically by July 27, 2026, at 14:00 EDT to the designated NRC email address, structured as three separate attachments labeled Technical Offer, Financial Offer, and Forms, with no compressed files or external links permitted and a total message size under 10MB. Only Canadian suppliers are eligible under the Policy on Reciprocal Procurement, and proposals must include completed Annex A - Offer Submission Form and Annex B - Offeror Declaration Form, along with an Integrity Declaration Form. All technical proposals must meet mandatory requirements identified with “must” or “mandatory” as defined in Annex F, and only those passing this gate will be invited to submit sample cuts for evaluation under Section 4.2 of Annex C within 15 business days of receiving materials, accompanied by a cutting report detailing equipment, operator, power rating, and gas parameters. The award will be based on the lowest
National Research Council of Canada

POSTED

19 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
Federal
Electrochemical Plating Line Design & IntegrationThe contract entails the design, fabrication, and full integration of a turnkey electrochemical plating line consisting of nine tanks along with associated control systems, rectifiers, and sensors, engineered to align seamlessly with the existing P6 and P7 plating lines to ensure operational consistency and scalability. The system must be fully functional upon delivery, meeting all technical specifications and performance benchmarks required for industrial-grade electrochemical processing. All components are to be standardized to the established platform to simplify maintenance, training, and future upgrades. The work is to be performed at a location with a zip code of 92135, and the contract falls under NAICS code 333515, indicating it is classified as industrial machinery manufacturing. It is structured as a subcontract under the Department of Defense, specifically managed by DLA Aviation, and was posted on July 1, 2026. Although the solicitation number and point of contact are not provided, the contract is accessible through the SAM.gov portal for further details and compliance tracking. There is no set-aside designation specified, indicating the opportunity is open to all eligible subcontractors without restrictions based on business size or ownership type.
DLA Aviation

POSTED

21 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance and Inspection ServicesThe contract seeks Quality Assurance and Inspection Services for aluminum sheets to ensure full compliance with specified material standards, including accurate alloy and temper identification, verified heat and lot traceability, and correct labeling and marking as required. All inspections must be conducted with precision to confirm that delivered materials meet contractual and technical specifications before acceptance, with documentation supporting each verification step to maintain traceability and accountability throughout the supply chain. This is a Total Small Business Set-Aside under the SBA program, designated under NAICS code 541330 for Architectural and Engineering Activities, and is issued by the Department of Defense through the Construction & Equipment MRO SVC I organization. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with performance expected to be carried out under the terms of a subcontract. Interested small businesses must submit proposals by the deadline to compete for this opportunity, which emphasizes rigorous adherence to quality control protocols and the ability to provide certified documentation of material compliance.
Engineering Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Shipment to DLA DestinationsThe contract involves the transportation of packaged aluminum sheets to two designated Department of Defense destinations: DLA Warner Robins in Georgia and Tinker Air Force Base in Oklahoma. Shipping is conducted under FOB Origin terms, meaning the buyer assumes all responsibility and costs for the goods once they leave the seller’s location. Invoicing must comply with the Wide Area WorkFlow system to ensure proper documentation and payment processing. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the Small Business Administration. The North American Industry Classification System code for this procurement is 484220, which corresponds to truck transportation of freight, excluding special commodities. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, and is issued under the Construction & Equipment MRO Svc I agency program managed by the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ComplianceThis contract requires strict adherence to OSHA-compliant hazard warning labels as mandated by DFARS 252.223-7001 and OSHA 29 CFR 1910.1200, ensuring all hazardous chemicals are properly labeled in accordance with federal workplace safety regulations. The scope centers on hazard communication and labeling compliance for supplies or services under a subcontract, where accurate and standardized labeling is critical to worker safety and regulatory alignment. All labeled materials must reflect current GHS standards for chemical hazard classification, signal words, pictograms, precautionary statements, and supplier information. The contract is designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility to small businesses as defined by the NAICS code 541690, which covers other scientific and technical consulting services. It was posted on July 20, 2026, with responses due by July 27, 2026, and falls under the Department of Defense's Construction & Equipment MRO SVC I procurement category. Performance location details are unspecified, but compliance must meet federal requirements regardless of site. Participation requires a thorough understanding of both OSHA and DFARS labeling obligations to ensure full regulatory compliance and avoid contract noncompliance penalties.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Preservation, Packaging, and Marking ServicesThe contract seeks subcontractor services for the preservation, packaging, and marking of aluminum sheets in accordance with military standards, requiring specific processes including drying, edge protection, fiberboard wrapping, and adherence to MIL-STD-129 labeling with the code 'ZZ'. All work must meet stringent defense requirements to ensure product integrity during storage and transport. The solicitation is restricted to small businesses under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, with the North American Industry Classification System code 493190 indicating warehousing and storage services. The opportunity is issued under the Department of Defense’s Construction & Equipment MRO SVC I program, with responses due by July 27, 2026, and was posted on July 20, 2026. Performance location details are unspecified, and interested parties must access the full solicitation through the DIBBS portal using the provided link.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Alclad Metal Sheet SupplyThe contract calls for the supply of 600 aluminum alclad sheets measuring 0.032 inches thick by 48 inches by 144 inches, manufactured from alloy 2024-T3 and fully compliant with SAE AMS4462B and applicable military specifications. These materials are intended for specialized defense applications requiring high strength-to-weight ratios and corrosion resistance, typical of aerospace and defense system manufacturing. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing compliance with FAR 19.5 guidelines. The North American Industry Classification System code 331315 identifies the relevant industry as aluminum rolling, drawing, and extruding, ensuring the offeror possesses appropriate industrial capability. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a one-week window for submission. The contract falls under the Department of Defense, specifically managed by the Construction & Equipment MRO SVC I organization, indicating the end-use is for maintenance, repair, and overhaul of military equipment. While no specific delivery location or point of contact is listed, performance is expected to support U.S. defense infrastructure, with all materials required to meet stringent defense quality standards. Interested parties must access the official solicitation portal via the provided DIBBS link to review full technical requirements and formal submission instructions.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Material Handling and SDS SubmissionThe contract requires strict compliance with the identification, handling, and labeling of hazardous materials in accordance with DFARS 252.223-7001 and MIL-STD-129 standards. All hazardous substances must be properly documented with corresponding Safety Data Sheets submitted as part of the delivery and packaging process, ensuring full regulatory alignment and operational safety throughout the supply chain. The scope encompasses end-to-end management of hazardous material protocols, from initial recognition through final shipment, with an emphasis on accuracy in labeling and timely SDS submission to meet Department of Defense requirements. This subcontract, posted on July 20, 2026, with a response deadline of July 27, 2026, falls under NAICS code 562910 for other remediation services and is administered by the Department of Defense under the Construction & Equipment MRO SVC I contract vehicle. The place of performance and specific office details are not provided, but all work must adhere to federal military standards for hazardous material logistics. Interested parties must respond by the deadline through the DIBBS portal to be considered for award.
Remediation Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Certificate of Quality and Mill Certification ServicesThe contract requires the generation and submission of a Certificate of Quality alongside comprehensive mill-material traceability documentation for all supplied materials. This includes detailed reporting of heat and lot numbers, specific alloy grade, temper designation, and confirmation of compliance with applicable ASTM and SAE standards. All documentation must be accurate, complete, and verifiable to ensure material integrity and regulatory alignment throughout the supply chain. The service is being procured as a subcontract under the NAICS code 541380, with the Department of Defense through its Construction & Equipment MRO SVC I office acting as the contracting entity. Responses must be submitted by the deadline of July 27, 2026, and the work must adhere strictly to the technical requirements outlined to meet military-grade material assurance protocols.
Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 323111
New
DIBBS
Marking and Labeling ServicesThe contract requires permanent marking of aluminum plates in strict compliance with MIL-STD-129 and ASTM B666 standards, ensuring traceability and regulatory adherence for defense-related applications. Marking must include critical identifiers such as the National Stock Number, alloy designation, heat or lot number, dimensions, and applicable specifications, using approved methods including stamping, stenciling, or adhesive labels. All markings must be durable, legible, and resistant to environmental degradation to meet military durability requirements. This is a subcontract solicitation issued under NAICS code 323111 for printing and related support activities, managed by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I organization. The solicitation is open for responses from July 20, 2026, with a firm deadline for submissions on July 27, 2026. The place of performance and point of contact details are not specified, but adherence to the technical standards and submission timeline is mandatory for consideration. Interested parties must ensure full compliance with the marking methods and data requirements outlined in the referenced military and material specifications.
Commercial Printing (except Screen and Books)

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 385110
New
DIBBS
Packaging and Preservation ServicesThe contract entails the packaging and preservation of aluminum plates in strict accordance with military standards MIL-STD-2073-1E and material specification ASTM B660-23, ensuring compliance with defense-grade requirements for handling and storage. The work includes specific preservation method ZZ, which involves detailed cleaning and thorough drying procedures to prevent corrosion and contamination, followed by proper palletization to ensure secure transport and long-term integrity. All processes must meet the rigorous environmental and quality controls mandated by the Department of Defense to maintain material readiness and operational reliability. This is a subcontract opportunity under the NAICS code 385110, posted by the Department of Defense through its Construction & Equipment MRO SVC I contracting office. Responses are due by July 27, 2026, with the solicitation open for submission starting July 20, 2026. While no specific place of performance or point of contact is listed, the work is expected to align with DLA logistics infrastructure and procurement protocols, and all submissions must be made through the official DIBBS platform using the provided solicitation number SPE8E926Q0602.

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Metal Plate Supply and ConformanceThe contract calls for the supply of aluminum alloy plates with precise specifications: 0.250 inch thickness and dimensions of 36 by 96 inches, fully compliant with SAE AMS4016N, ASTM B209, and AMS-QQ-A-250/8C standards. Full traceability and certified documentation are required to ensure every batch meets the mandated material and quality benchmarks, with all certifications included to verify conformance. The plates must be produced and delivered under strict adherence to established aerospace and military-grade material protocols, ensuring reliability for critical applications. This is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a solicitation posted on July 20, 2026, and responses due by July 27, 2026. It falls under NAICS code 331315, indicating a focus on aluminum rolling, extruding, and drawing. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA’s DIBBS platform, and suppliers must meet stringent compliance and certification requirements to qualify for award. All deliveries must align with the contractual material standards and documentation expectations without exception.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561990
New
DIBBS
Military Marking and Barcoding ServicesThe contract requires the application of standardized military markings and barcodes in strict compliance with MIL-STD-129 to ensure proper item identification, traceability, and storage labeling for defense-related equipment and supplies. All labeling must adhere to the established military standards to support operational readiness, logistics tracking, and inventory management across the Department of Defense supply chain. The work is to be performed at the Tobyhanna location with a ZIP code of 18466-5050, and the subcontract is classified under NAICS code 561990 for other administrative and support services. Responses must be submitted by July 31, 2026, with the solicitation posted on July 20, 2026, and is open for bidding through the DIBBS platform. No set-aside provisions are specified, and the contracting activity falls under the Construction & Equipment MRO SVC I organization within the Department of Defense.
All Other Support Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and ComplianceThe contract requires the provision of hazard warning labels and Material Safety Data Sheets (MSDS) for rubber strip products, strictly in accordance with 29 CFR 1910.1200, which governs hazard communication standards. Compliance is mandatory unless the rubber strip qualifies for exemption under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), the Federal Food, Drug, and Cosmetic Act (FDCA), the Consumer Product Safety Act (CPSA), the Federal Hazardous Substances Act (FHS), or the Federal Aviation Administration (FAA) regulations. The work is structured as a subcontract under NAICS code 541690, falling under the Department of Defense’s Construction & Equipment MRO SVC I program, with performance obligations centered at Tobyhanna, Pennsylvania, zip code 18466-5050. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and all deliverables must align with U.S. regulatory requirements to ensure the safe handling, storage, and use of the rubber strip material in defense-related applications.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details