CGC WALNUT (WLB 205) FY12 DRYDOCKING AND REPAIRS

The U.S. Coast Guard, Surface Force Logistics Command, IBCT, C&P2 will be issuing a solicitation for the FY12 Drydocking and Repairs of CGC WALNUT (WLB-205) whose home port is Base Support Unit Honolulu, HI. The eventual contract will be performed at EITHER the contractor's certified drydock facility OR at Pearl Harbor Naval Shipyard's graving dock facility. This procurement is a total small business set-side for all 336611 North America Industry Classification System code contractors. The period of performance will begin on 14 Mar 12 and complete 23 May 12. Only one contract will be awarded for this procurement. Foreseeable costs will be included in the price evaluation of offers, for both places of performance. This procurement is not geographically restricted. The proposed work items include but are not limited to: Hull Plating, U/W Body, Inspect Hull Plating (U/W Body), Ultrasonic Testing Appendages (U/W), Leak Test Appendages (U/W) - Internal, Preserve Voids (Non-Accessible), Leak Test Chain Lockers, Inspect Voids (Non-Accessible), Preserve Internal Surfaces Propulsion Shafting Remove, Inspect, and Reinstall Propulsion Shaft Seals, Mechanical Overhaul and Inflatable Renewal Propulsion Shaft Bearings (External), Check Clearances Propulsion Tail Shaft Sleeve, Skim Cut Propulsion Shaft Bearing, Stave Renewal Controllable Pitch Propeller, System Maintenance Controllable Pitch Propeller, Hub General Maintenance Controllable Pitch Propellers, Clean and Inspect Controllable Pitch Propeller Hub, Remove and Reinstall Main Diesel Engine (MDE) Exhaust Stack Uptakes, Clean Circuit Breakers (60HZ), Inspect and Test Fathometer Transducer, General Maintenance Fwd Scan Sonar Transducer, General Maintenance Vent Ducts (Engine and Motor Room All), Commercial Cleaning Vent Ducts (Galley and Pantry Room All), Commercial Cleaning Vent Ducts (Laundry Exhaust), Commercial Cleaning Vent Ducts (All Other), Commercial Cleaning Compressed Air Receivers, Clean, Inspect, and Test Rudder Stock Bearings, Check Clearances Rudder, Inspect and Repair Pad Eyes, Inspect and Test Anchor Windlass, Overhaul (Level 2) Buoy and Cargo Handling Crane Wire Rope, Renew U/W Body, Preserve "Partial - Condition A " U/W Body, Preserve "Partial - Condition B" U/W Body, Preserve "Partial - Condition C " Cathodic Protection / Zincs, Renew Impressed Current Cathodic Protection System, Inspect and Maintain Drydocking Temporary Services, Provide Sea Trial Performance, Provide Support Buoy Deck Equipment Emergency Brake Release Hand Pump, Modify SORS Hold Stowage, Install Rail System Buoy Chain (In-Haul) Winch, Modify Crossdeck Winches, Overhaul Hydraulic Inhaul Winch, Overhaul Mechanical Chain Stoppers, Overhaul Warping Capstan, Level 2 Inspect and Repair Buoy Crane Extension Cylinder, Inspect and Repair Buoy Crane Main and Auxiliary Flag Block Assemblies, Overhaul Buoy Crane Luff Cylinder, Overhaul Buoy Crane Main and Auxiliary Winches, Inspect and Test Buoy Crane Components (Various), Preserve Buoy Crane, Structural Assessment Buoy Crane Upper Crane Cab, Preserve Grey Water Holding Tanks, Clean and Inspect Sewage Holding Tanks, Clean and Inspect Sewage Piping, Clean and Flush Potable Water Pneumatic Tanks, Clean and Inspect Propulsion Shaft Fairwaters and Rope Guards, Inspect and Repair Stern Tube Interior Surfaces, Preserve 100% Deck Covering (Interior Wet/Dry), Renew Chain Locker, Preserve 100% Decks - Exterior, Preserve Mast Preservation Superstructure Preservation Sea Valves and Waster Pieces, Overhaul or Renew Auxiliary Sea Water System Valves, Overhaul Or Renew Deck Covering (Wet/Dry), Seal Pilot House Windows, Preserve Bilges (Machinery Space) - AMR, Preserve SORS Deck, Preserve Decks (All Interior) - Upper Level AMR, Preserve Potable Water Pump Room Deck, Preservation Chilled Water System Insulation, Renew Portlight Refurbish Bilges (Machinery Space) - MMR, Preserve Bilges (Machinery Space) - Stern Thruster Machinery Room, Preserve Scuttles, Upgrade MDE Mount Renewal Hydraulic Steering Cooler, Install Composite Labor Rate GFP Report Laydays A Request for Proposal (RFP) will be issued no sooner than 31 Oct 11. For further information concerning this acquisition, contact the POC identified on this Notice. Drawings on CD may be requested by emailing the Contracting Officer at contact@example.gov