Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CIRCUIT CARD ASSEMBLY

Active
SPE7M5-26-Q-0989Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a firm fixed price solicitation for the procurement of two circuit card assemblies, identified by part number 5998-01-700-8350. The items are classified as commercial off-the-shelf products and must adhere to the technical data provided in basic drawing 16236 RE-017008350 Revision D. The contractor is advised to utilize MIL-PRF-31032 for printed circuit boards and ensure laminate materials meet quality standards equivalent to the cancelled MIL-S-13949. The agreement mandates strict compliance with DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required for specific components. Delivery is required within 227 days after order, with the final destination and acceptance point located at the Joint Logistics Unit East in Moorebank, Australia.

General Info

Fixed price procurement of two circuit card assemblies delivered to Moorebank, Australia.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334412 - Bare Printed Circuit Board ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA
Contacts
CHERYL TIMMONS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CIRCUIT CARD ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS IS A COMMERCIAL OFF-THE-SHELF ITEM.
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
FOR PRINTED CIRCUIT BOARDS OR PRINTED WIRING
BOARDS WHERE MIL-PRF-55110(FORMERLY MIL-P-55110)
OR MIL-P-50884 IS CITED, IT IS RECOMMENDED THAT
MIL-PRF-31032 BE UTILIZED. MIL-PRF-55110 IS
PRESENTLY INACTIVE FOR NEW DESIGNS AND HAS BEEN
REPLACED BY MIL-PRF-31032. MIL-P-50884 WILL
BECOME INACTIVE FOR NEW DESIGNS AND REPLACED
BY MIL-PRF-31032. SINCE THERE CURRENTLY IS NO
EQUIVALENT DOCUMENT FOR THE CANCELLED MIL-S
13949 (FORMERLY MIL-P-13949), DSCC RECOMMENDS
THAT THE CONTRACTOR HAVE A METHOD OF ASSURING
THAT LAMINATE MATERIALS USED IN CONJUNCTION WITH
DSCC CONTRACTS BE AT LEAST EQUIVALENT IN QUALITY
AND RELIABILITY TO THAT WHICH WAS AVAILABLE
PRIOR TO THE CANCELLATION OF MIL-S-13949 ON
NOVEMBER 30, 1998.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TDP Rev A Gen 1 IAW BASIC DRAWING NR 16236 RE-017008350 REVISION NR DTD 10/02/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7M5-26-Q-0989
SECTION B
SUPPLY/SERVICE: 5998-01-700-8350 CONT'D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 5998-01-700-8350 2.000 EA $ _______________ $ _______________
CIRCUIT CARD
ASSEMBLY
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 227 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B UNIT CONT:E5 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:Q PACKING LEVEL: B MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
PAT002
AUSTRALIAN GOV CARGO OFFICE
MULTI AIR FREIGHT C O DHL
99 SOUTH HILL DRIVE, SUITE D
BRISBANE CA 94005-1209
US
FREIGHT SHIPPING ADDRESS:
PATJ00
JOINT LOGISTICS UNIT EAST
D182 MAIN WAREHOUSE
FJ PARTRIDGE VC ROAD
MOOREBANK
AU
MARKFOR
PATJ00
JOINT LOGISTICS UNIT EAST
D182 MAIN WAREHOUSE
FJ PARTRIDGE VC ROAD
MOOREBANK
AU
M/F: (TCN) PATJ5452495716
RDD: 285
PROJ: TP 2
SUPP ADD: PA2JCT SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A01 DIST: F9B ADV: 26 FC: 48
SPE7M5-26-Q-0989
SECTION B
SUPPLY/SERVICE: 5998-01-700-8350 CONT'D
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7014124117 0001 N/A N/A N/A 09/30/2025

SPE7M5-26-Q-0989 NSN/Part Number: 5998-01-700-8350 Quantity: 2 EA Purchase Request: 7014124117QTY: 2 Delivery: 227 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334412
New
DIBBS
ELECTRONIC COMPONENTS
Solicitation # SPE7M0-26-T-072N
This contract, identified as SPE7M0-26-T-072N, is a solicitation by the Department of Defense Maritime Supply Chain ESOC Buys for the procurement of one electronic components assembly. The item is identified by NSN 5998-01-698-9810 and part number 401/E5206 from JCB Inc. The required delivery date is September 3, 2026, with a delivery timeframe of five days after receipt of order. The shipment is designated as FOB Origin with inspection and acceptance occurring at the destination. The goods are to be delivered to the AWCF SSF Rotational Force Korea at Lewis McChord, Washington. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. The contract is managed under NAICS code 334412.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
Supply of Cotter Pins (NSN 5315014968204)
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE4A5-26-T-402N
This contract is for the procurement of one circuit card assembly, identified by NSN 5998016124250 and part number 449-005-001-105. The order is issued under solicitation number SPE4A5-26-T-402N with a required delivery timeframe of five days. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the Fleet Readiness Center East in Cherry Point, North Carolina. The agreement mandates strict adherence to various technical and quality standards, including ISO 9001:2015 for manufacturers and specific DLA packaging requirements. It incorporates cybersecurity protocols via CMMC Level 2 self-assessment and requires compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334412
New
Federal
PC CARD,POWER
Solicitation # N0010426QSD56
This solicitation is for the repair of a power PC card, managed by the Navsup Weapon Systems Support Mech. The contract requires the contractor to provide a quote including the unit price, total price, and a specific Repair Turnaround Time (RTAT). The RTAT is measured from the physical receipt of the asset at the contractor's facility to the date of government acceptance. Failure to meet the required RTAT may result in a per-unit monthly price reduction, which will be implemented via a reconciliation modification. Key requirements include Government Source Inspection (GSI) and adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. The contract is a small business set-aside and requires the contractor to verify nomenclature and part numbers before responding. If an item is determined to be beyond economical repair, a negotiated testing and evaluation fee may be applied. All freight is handled by the Navy per the Commercial Asset Visibility Statement of Work, and the award will be issued bilaterally, requiring written acceptance from the contractor.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334412
New
Federal
MONOPLUSE COMBINER
Solicitation # SPRMM126QHC71
This solicitation is for the manufacture and procurement of the Monopluse Combiner under a firm-fixed-price contract using Lowest Priced Technically Acceptable evaluation criteria. Issued under FAR Part 18 emergency acquisition flexibilities, the requirement specifies that items must be physically identified according to MIL-STD-130 and meet ISO 9001 quality system standards. The contract mandates the use of the Wide Area Workflow (WAWF) for electronic submission of combined invoice and receiving reports and requires that any non-manufacturer offerors identify the original equipment manufacturer and their CAGE code. Key operational requirements include strict adherence to production facility locations, with any changes requiring written approval and a fee to cover administrative costs. Quality assurance is the primary responsibility of the contractor, who must maintain inspection records for 365 days following final delivery. The solicitation also emphasizes that only authorized distributors of the original manufacturer will be considered for award, requiring proof of authorization on company letterhead. All contractual documents are considered issued upon electronic transmission, and the government reserves the right to perform inspections to ensure compliance with all specified requirements.
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # SPRMM126QGE94
This solicitation, issued by DLA Mechanicsburg, seeks the manufacture and supply of a circuit card assembly. The contract requires strict adherence to specific cage codes and reference numbers, and it prohibits the use of refurbished materials. All items must be physically identified according to MIL-STD-130, and packaging must comply with MIL-STD 2073. Contractors are required to use the PIEE-WAWF system for electronic submission of invoices and receiving reports. The agreement mandates that any change in production facilities must be approved in writing by the Contracting Officer and typically requires a price reduction of 250 dollars to cover administrative costs. Quality assurance is the primary responsibility of the contractor, who must maintain inspection records for 365 days following final delivery. Authorized distributors must provide proof of their status on company letterhead to be considered for award. All contractual documents are considered issued when sent via mail, fax, or electronic means.
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 334412
New
Federal
ELECTRONIC COMPONEN
Solicitation # N0010425QXD02
This solicitation, issued by the NAVSUP Weapon Systems Support in Mechanicsburg, Pennsylvania, is for the procurement of electronic components under a firm-fixed-price agreement. The requirement specifies that the awardee must be an authorized source, and distributors must provide official OEM documentation to prove authorization. The procurement is subject to Emergency Acquisition Flexibilities and requires compliance with ISO 9001 quality systems and MIL-STD-129 marking standards. All freight is designated as FOB Origin, and government source inspection is required. The solicitation process has undergone multiple extensions, with the final response deadline set for September 11, 2026. Quotes must be submitted electronically to the designated Navy procurement contact and must include unit pricing, total price, procurement delivery lead time, and a minimum 90-day expiration date. The contract emphasizes strict traceability and adherence to specific design change codes to ensure the form, fit, and function of the electronic components are maintained.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # N0010426QEF68
This solicitation is for the procurement of a circuit card assembly, specifically part number 6ES7432-1HF00-0AB0 manufactured by Siemens Industry Inc. The contract is a fixed-price agreement with FOB-Destination terms, requiring the item to be marked as an Analog Output Mod. Key technical requirements include strict adherence to the specified manufacturer part number and a total prohibition on the intentional use of mercury or mercury-containing compounds. The contractor must maintain a government-acceptable inspection system and provide a Certificate of Compliance per DI-MISC-81356 upon delivery. The agreement incorporates various federal clauses, including cybersecurity maturity model certification, sea transportation regulations, and specific security prohibitions. Pricing for quotations remains valid for 60 days after the closing date, and the contractor is required to follow a defined order of precedence for document conflict resolution, prioritizing purchase order amendments and schedules over general terms.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # N0010426QEF46
This solicitation from Navsup Weapon Systems Support Mech involves the manufacture and design of a Siemens Industry, Inc. circuit card assembly, part number 6GK1503-3CD00. The contract is a total small business set-aside under NAICS code 334412. Key technical requirements include a strict prohibition against the intentional addition of mercury or mercury-containing compounds to any hardware or supplies. The contractor is responsible for maintaining a government-acceptable inspection system and must provide a Certificate of Compliance per DI-MISC-81356 at the time of material delivery. The procurement follows specific logistical and quality protocols, including FOB Destination terms and mandatory use of Wide Area Workflow for payment instructions. Packaging must adhere to MIL-STD-2073 and specific cleanliness controls if invoked, such as MIL-STD-767 or reactor plant clean standards. The contract emphasizes strict adherence to technical documentation and revisions, noting that any requested waivers or deviations regarding delivery dates or technical non-conformance must be submitted with detailed justification for government review. Pricing for quotations is generally valid for 60 days unless otherwise specified.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # N0010426QND79
This contract pertains to the repair of CIRCUIT CARD ASSEMBLY items under a fixed-price arrangement, governed by stringent technical, quality, and compliance requirements set by the U.S. Navy through NAVSUP Weapon Systems Support in Mechanicsburg, Pennsylvania. The repair work must strictly adhere to specified drawings, including 8291221 and 8291222, and conform to MIL-STD-130 Rev N for marking, ANSI/ESD S20.20 for electrostatic discharge control, and MIL-STD-2073 for packaging. All repairs must be performed in accordance with the contractor’s approved procedures and original manufacturer specifications, with full accountability for teardown, evaluation, repair turn-around time, and throughput constraints. Quotes must include firm fixed pricing for full repair efforts, estimated or actual costs for new parts, and explicit disclosure of any exceptions to packaging, labeling, inspection locations, or surplus materials; failure to disclose exceptions may result in award based solely on solicitation terms. Price reductions will be imposed for noncompliance with established repair turn-around times, and failure to meet deadlines may trigger default termination rights. The contract is issued under Emergency Acquisition Flexibilities and is subject to Defense Priorities and Allocations System (DPAS) certification, with a mandatory priority rating for national defense use. All contractors must be authorized distributors of the original manufacturer’s item, with proof provided on official letterhead. Full compliance with Buy American Act provisions, Small Business Subcontracting Plan requirements, and cybersecurity maturity model certification is mandated. The contractor is responsible for all inspection and testing activities, with records retained for 365 days after final delivery, and must secure formal government acceptance of all repaired items within the contracted RTAT. Documentation access is restricted via SAM.gov, and classified or NOFORN materials require formal requests through designated Navy channels. Final acceptance requires programming and testing by the ISEA at NUWC Keyport, Washington, before fleet issuance. Contract documents are deemed issued upon electronic transmission, requiring bilateral contractor acceptance. All communications and submissions must reference the solicitation number N0010426QND79, with responses due by August 28, 2026.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 28 days
View Details
NAICS: 334412
New
DIBBS
PRINTED CIRCUIT BOA
Solicitation # SPE7M5-26-T-456S
Solicitation SPE7M5-26-T-456S is a fixed-price procurement issued by the DLA Land and Maritime Active Devices Division for the acquisition of seven printed circuit boards, identified by NSN 5998-01-555-9093. The required delivery date is November 5, 2027, with a delivery period of 416 days. Shipping is FOB Origin, and both inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and requires compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Key regulatory requirements include a CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and a prohibition on the intentional use of mercury in hardware, per NAVSEA 5100-003D. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.
ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M1-26-T-323Y
This contract is for the procurement of one circuit card assembly, identified by NSN 5998017364799 and Honeywell part number 8531170-902. The order is issued under solicitation number SPE7M1-26-T-323Y by the Department of Defense Maritime Supply Chain. Delivery is required within 20 days after receipt of the order, with an original required delivery date of August 27, 2026. The shipment is destined for the Marine Aviation Logistics Squadron 26 in Jacksonville, North Carolina, with FOB Origin terms. The contractor must adhere to specific DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, and follow RP001 packaging requirements. Inspection and acceptance will take place at the destination.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBLY
Solicitation # SPE7M5-26-Q-0990
This contract is for the procurement of 201 units of a circuit card assembly, identified as part number TU14404P from Alliance Laundry Systems LLC. The delivery is required within 42 days after the order is received, with inspection and acceptance occurring at the destination. The shipment is destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, specifically regarding the prohibition of intentionally added mercury compounds. Extensive packaging standards are required to prevent damage to leads and terminals, including the use of DOD qualified electrostatic discharge and electromagnetic interference protective materials per MIL-PRF-81705. All packaging and marking must comply with MIL-STD-129 and DLA packaging requirements for procurement.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 18 days
View Details
NAICS: 334220
New
DIBBS
COUPLER, ROTARY, RADIO F
Solicitation # SPE7M5-26-T-460U
This contract is for the procurement of two rotary radio frequency couplers, identified by NSN 5985-00-140-8496. The agreement specifies a delivery timeframe of 20 days after order, with FOB and inspection points set at the origin. The items are designated as critical application items and must adhere to strict quality and sampling standards, including MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan for acceptance. The contract mandates compliance with several regulatory and technical requirements, including CMMC Level 2 self-assessment for cybersecurity and the prohibition of mercury or mercury-containing compounds in the hardware and packaging. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129. The goods are to be shipped via A.J. Worldwide Services Inc. to the DZ Ikmal Merkezi Komutanligi in Derince Izmit, Turkey, with a required delivery date of September 8, 2026.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
DISCHARGER, ELECTROSTAT
Solicitation # SPE7M5-26-T-461B
This solicitation from the Department of Defense Active Devices Division is for the procurement of 26 electrostatic dischargers under part number 5920-01-305-5318. The contract requires delivery within 334 days after the order is placed, with performance located at Hill AFB. The agreement mandates strict adherence to cybersecurity and data protection standards, including CMMC Level 2 certification and the protection of covered defense information. It also imposes rigorous export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and specific training to access technical data. Additionally, the contract incorporates DLA master list technical and quality requirements, specific packaging standards, and origin-based inspection and acceptance protocols.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CALIBRATED FL
Solicitation # SPE7M5-26-T-461C
This contract is for the procurement of five calibrated flow valves, identified by NSN 4820011711985 and part number 45.0001 from The Filtrine Manufacturing Company. The agreement specifies a delivery timeframe of 55 days after the order, with shipping set as FOB Origin and inspection and acceptance occurring at the destination. The items are to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance requirements include adherence to DLA packaging standards, MIL-STD-129 marking, and MIL-STD-2073-1E preparation for delivery. Additionally, the contract mandates the removal of government identification from non-accepted supplies and strictly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-461D
This contract is a solicitation for the procurement of four electrical plug connectors, identified by NSN 5935-01-066-0838 and part number M81511/56WD01P1. The items are classified as critical application items and must adhere to the Qualified Products List for connector assemblies and electrical contacts. Technical specifications are governed by SAE AS81511/56 and the DLA Master List of Technical and Quality Requirements. The delivery is required within 127 days, with a need ship date of January 20, 2027. Shipping is FOB Origin, with the final destination being the DLA Distribution New Cumberland facility in Pennsylvania. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous or non-hazardous materials based on FED-STD-313 and ASTM D3951. Inspection and acceptance will take place at the destination.
Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
PARTS KIT, ELECTRONIC
Solicitation # SPE7M5-26-T-403G
This contract is a solicitation issued by the Department of Defense Active Devices Division for the procurement of electronic parts kits, specifically part number D000K762 from Oshkosh Defense LLC, under NSN 5999017245797. The requirement consists of two separate line items, each for a quantity of one unit, with a total quantity of two. Delivery is required within 106 days, with specific shipping destinations at DLA Distribution Albany, Georgia, and DLA Distribution New Cumberland, Pennsylvania. The agreement mandates strict adherence to technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1 for preservation and packaging of kits. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. The solicitation is identified by number SPE7M5-26-T-403G and falls under NAICS code 334419.
Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334220
New
DIBBS
COVER, ANTENNA ELEME
Solicitation # SPE7M5-26-T-461H
This contract is for the procurement of one antenna element cover, identified by NSN 5985016793811 and Boeing part number 7-611113799-001. The item is designated as a critical application item and must be delivered FOB Origin to the Central Receiving and Shipping Point at Fort Rucker, Alabama, within 20 days. The required delivery date is set for August 24, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and MIL-STD-2073-1E, and marking guidelines per MIL-STD-129. Compliance with cybersecurity standards is required, specifically CMMC Level 2 self-assessment and regulations regarding covered defense information. Shipping must be conducted via the fastest traceable means, explicitly prohibiting the use of parcel post.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M5-26-T-398S
The contract pertains to the procurement of two electrical solenoids identified by NSN 5945010399852 under solicitation SPE7M5-26-T-398S, issued by the Defense Logistics Agency Land and Maritime Active Devices Division. The requirement is a small business set-aside with a delivery deadline of five days after award, to be delivered FOB origin to the General Depot of Naval Supplies in Kaohsiung, Taiwan. The solenoids must be packaged in accordance with MIL-STD-2073-1E using specified preservation, wrapping, and container methods, with palletization conforming to DLA’s RP001 packaging standards and labeling per MIL-STD-129. Each unit must be individually marked with lead and lead-free status compliant with IPC/JEDEC J-STD-609, and government identification must be removed from non-accepted items. Mercury or mercury-containing compounds are prohibited in the product unless part of exempted functional components such as batteries, fluorescent lights, sensors, or NAVSEA-specific reagents, in which case portable devices must include secondary containment as per NAVSEA 5100-003D. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with attributes classified as critical, major, or minor per specified AQL levels, and unspecified attributes treated as major. Zero non-conformances are mandatory in sample lots unless otherwise noted, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. The contract invokes numerous FAR and DFARS clauses covering cybersecurity safeguards, cyber incident reporting, prohibition of hexavalent chromium and mercury, exclusion of covered defense telecommunications equipment, whistleblower protections, payment electronic submission via WAWF, and compliance with NIST SP 800-171 requirements. Offerors must validate their small business status, HUBZone eligibility, and unique entity identifier in SAM, and submit required certifications regarding prior DoD official compensation and defense information controls. Payment will be processed through WAWF using invoice and receiving reports for fixed-price line items, and bids must be submitted via DIBBS by August 20, 2026. The acquisition is eligible for automated award, subject to the absence of first article test requirements, and the HUBZone price evaluation preference may be applied unless waived. The sol
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335999
New
DIBBS
STRIP, ELECTRICAL GROUN
Solicitation # SPE7M5-26-T-461F
This solicitation, issued by the Department of Defense Active Devices Division under contract number SPE7M5-26-T-461F, is for the procurement of two electrical grounding strips, identified by NSN 5999-01-588-3447. The items are to be delivered to Fort Drum within 10 days after the order is placed. The contract adheres to DLA packaging requirements and incorporates specific technical and quality standards as outlined in the DLA Master List. Key compliance mandates include the removal of government identification from non-accepted supplies and strict adherence to physical item marking. Additionally, any alternate offeror must provide a comprehensive data package for both the approved and alternate parts.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M5-26-T-461G
This contract is for the procurement of six linear microcircuits under NSN 5962013504140. The acquisition is strictly limited to approved sources of supply listed in the Standard Microcircuit Drawing and requires the use of qualified manufacturers and distributors. Key compliance mandates include the submission of DLA Land and Maritime Form 918 and full supply chain traceability documentation to the contract administrator for approval prior to shipment. The items are designated as critical application components and must adhere to strict packaging and marking standards. This includes IPC/JEDEC J-STD-609 for lead finish identification and MIL-PRF-81705 for electrostatic discharge and electromagnetic interference protection. Delivery is set for 154 days after the order, with inspection and acceptance occurring at the destination. Additionally, the contractor must ensure that no mercury or mercury-containing compounds are intentionally added to the hardware.
Semiconductor and Related Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, PLASTI
Solicitation # SPE7M5-26-Q-0987
This solicitation, issued by the Department of Defense Active Devices Division, is for the procurement of 14 fixed plastic dielectric capacitors under NSN 5910-01-496-8221. The contract is a total small business set-aside with a delivery window of 418 days after the order is placed. Performance is designated for San Diego, California, and the items must adhere to source-controlled drawings, meaning only approved sources cited on the drawing are eligible unless otherwise authorized by the cognizant design activity. Compliance requirements are stringent, including CMMC Level 2 certification for third-party assessment and adherence to strict DLA packaging, marking, and quality conformance inspection standards. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD export-controlled data training. All supplies must undergo inspection and acceptance at the origin and comply with the DLA master list of technical and quality requirements.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-26-T-460V
This contract is for the procurement of 22 electromagnetic relays, identified by NSN 5945-01-352-852 and part number 6957ED59-3A from DRS Naval Power Systems Inc. The agreement specifies a delivery timeframe of 168 days after the order, with a required delivery date of May 10, 2027. Shipping is FOB Origin, and both inspection and acceptance will occur at the destination, which is the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, including specific lead finish labeling per IPC/JEDEC J-STD-609. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions approved by NAVSEA.
Relay and Industrial Control Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details