Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

CIRCUIT CARD ASSEMBLY

Active

SPRDL1-26-R-A012Federal

Response Deadline10/02/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified by number SPRDL1-26-R-A012, is for the procurement of circuit card assemblies under NAICS code 334412. Issued by the Department of Defense through DLA Land Warren, the opportunity was posted on September 4, 2026, with a response deadline of October 2, 2026. The place of performance is located in Anniston, Alabama. This is a restricted solicitation because the Technical Data Package is source controlled to General Dynamics Mission Systems Canada. There are no set-asides applied to this action. Interested parties may contact Janeca Dent for further information regarding this requirement.

General Info

DOD procurement of circuit card assemblies in Anniston, Alabama, deadline October 2, 2026.

Agency

Department Of Defense → DLA Land WarrenView Agency

NAICS

334412 - Bare Printed Circuit Board ManufacturingView NAICS

Place of Performance

Anniston, AL, 36201, USA

Set-Aside

NONE

Documents

(1)

SPRDL126RA012.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedSep 4

Solicitation

Response DeadlineOct 2

Submission deadline

Response Deadline

10/02/2026, 08:30:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land Warren

Contacts1 person available

OfficeWARREN, MI, 48397, USA

Organization / Agency

Department Of Defense → DLA Land Warren

View Agency Profile

Office AddressWARREN, MI, 48397, USA

Contacts

JANECA DENT

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

THIS SOLICITATION IS RESTRICTED TO The Technical Data Package (TDP) is Source Controlled to Contractor:
GENERAL DYNAMICS MISSION SYSTEMS CANADA.

Similar Contracts

Same NAICS industry code

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAF9

This solicitation, issued by the Navsup Weapon Systems Support Mech, seeks the manufacture of a circuit card assembly under NAICS code 334412. The contract is DO certified for national defense under the Defense Priorities and Allocations System and is being processed using Emergency Acquisition Flexibilities. The government retains an option to order an additional quantity up to 100 percent of the original order for 365 days after receipt at the same price. Key technical requirements include compliance with ISO 9001 quality systems, ANSI/ESD S20.20 electrostatic discharge controls, and strict mercury-free mandates for use on submarines and surface ships. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization. The contract includes a one-year warranty from the date of delivery and requires adherence to specific military standards for marking and packaging, including MIL-STD-129 and MIL-STD-2073.

Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month

CIRCUIT CARD ASSY

Solicitation # N0010426QQC09

This contract pertains to the repair of a CIRCUIT CARD ASSY under a bilateral agreement tied to a Basic Ordering Agreement (BOA), requiring formal contractor acceptance before execution. The Government mandates a strict 365-day Repair Turnaround Time (RTAT), measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system, with final inspection and acceptance by the Government due within that timeframe. Failure to meet the RTAT incurs a per-unit, per-month price reduction, capped at a specified amount, without prejudice to other remedies such as termination for default. All repairs must adhere to the original manufacturer’s specifications and drawings, and must comply with MIL-STD-130 Rev N for marking. Inspection is the contractor’s responsibility but subject to Government oversight, and all inspection records must be maintained for 365 days after final delivery. The contract requires FOB Origin freight terms, with the Navy handling all freight via CAV procedures, and prohibits substitutions without prior written approval from the contracting officer, classified under specific change codes. The contractor must certify compliance with Buy American provisions, Small Business Subcontracting Plan requirements, and Cybersecurity Maturity Model Certification levels, and provide detailed pricing justification if pricing deviates from historical norms or if the item is newly sourced. An option exists to increase quantities at the same unit price, exercisable by the Government within the FAR 52.217-6 timeframe. The contractor must be an authorized distributor of the original manufacturer’s item, with proof submitted with the offer. Pricing must include unit and total costs along with RTAT confirmation, and a T&E fee ceiling is set for assets deemed beyond repair. All technical documents referenced must be obtained through official DoD sources, with distribution restricted by designated codes as outlined in OPNAVINST 5510.1. The contracting officer is Genevieve E. Miller, and the CAGE code and inspection location details must be provided in the response.

Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 2 months

ASSY, CONTROL PANEL

Solicitation # SPRMM126QGB74

This contract solicitation, identified as SPRMM126QGB74, is for the procurement of an ASSY, CONTROL PANEL under NIIN 016691573, following the removal of NIIN 016414459 from the requirement. The solicitation is structured as a Total Small Business Set-Aside, limited exclusively to small business concerns, and is evaluated under the Lowest Price Technically Acceptable (LPTA) method per DFARS 215.101-2-70(a)(1)(i), where technical acceptability serves as a mandatory pass/fail gate. All offers must comply fully with solicitation requirements without exceptions; failure to meet any term in Section I or taking exceptions disqualifies the proposal. The contract requires compliance with MIL-STD-130 for Unique Item Identification, MIL-STD-2073 for packaging and preservation, and MIL-STD-129 for marking, including specific labeling for Depot Level Repairable items with yellow DLR text on blue backgrounds. The contractor assumes full responsibility for all inspection, quality assurance, and recordkeeping obligations, with records to be maintained for 365 days post-final delivery, and the Government retains the right to conduct independent inspections. Items must be delivered FOB Destination to specified locations in New Cumberland, PA, and Tracy, CA, with no specified delivery timeline beyond ASAP. Payment must be processed electronically through Wide Area Workflow (WAWF), requiring contractor registration in both SAM and WAWF systems, and invoices must be submitted through the designated electronic infrastructure. The contract mandates adherence to Buy American provisions, NIST SP 800-171 for safeguarding Controlled Unclassified Information, and FAR 52.222-50 on Combating Trafficking in Persons. Contractors must be authorized distributors of the original equipment manufacturer, with proof submitted, and must provide the OEM's CAGE code and part number if not the manufacturer. The offer submission deadline has been extended to June 30, 2026, with responses accepted via mail, fax, or email, and electronic submissions via EDI must explicitly note any deviations from specified standards. All contractual documents are deemed issued upon electronic transmission or deposit in the mail, and failure to register for Electronic Data Access (EDA) on the PIEE portal may result in missed notifications. Compliance with the Federal Acquisition Supply Chain Security Act and the new clause 52.

SPRMM1 DLA Mechanicsburg

POSTED

about 21 hours ago

DEADLINE

MODIFIED CPU CARD

Solicitation # N0010426QZB71

This sole source solicitation is for the repair and refurbishment of Modified CPU Cards, which are designated as Naval Critical Safety Items and Fly-By-Wire Submarine Flight Critical Components. The contract is a firm fixed price requirement that mandates a high level of quality control, including a one-year warranty from the date of delivery and a requested turnaround time of 365 days. Contractors must possess a valid U.S. security clearance of Confidential or higher and adhere to strict traceability and certification standards to ensure the safety and functionality of these crucial shipboard systems. The scope of work includes a detailed teardown and evaluation process, where the contractor has 45 days after receiving the carcass to provide a firm fixed price quote for the full repair. Strict adherence to quality systems such as ISO 9001 or MIL-I-45208 is required, along with comprehensive documentation of all inspections and tests. The contract also specifies rigorous configuration control, requiring formal Engineering Change Proposals for any modifications affecting the form, fit, or function of the equipment. All final products must undergo 100 percent inspection and be delivered with a formal certificate of inspection.

Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month

59--DCI PANEL ASSY

Solicitation # N0010425QBT79

Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # N0010426QZB74

This sole source solicitation is for the refurbishment of circuit card assemblies designated as Fly-By-Wire Submarine Flight Critical Components (SFCC). The contractor must possess a valid U.S. security clearance of Confidential or higher and adhere to strict quality assurance standards, including ISO 9001 and MIL-STD-1686 for electrostatic discharge control. Key requirements include a 45-day window for teardown and evaluation after receiving carcasses, a requested turnaround time of 180 days, and a one-year warranty from the date of delivery. The contract emphasizes rigorous traceability and certification, requiring unique Material Identification and Control numbers and 100 percent inspection of all lots. All deliverables must be processed through Wide Area Workflow (WAWF), and the contractor is prohibited from using mercury or mercury-containing compounds. The procurement is certified for national defense under the Defense Priorities and Allocations System and is placed under basic agreement N0010422GZD01.

Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Supplier of Circuit Card Assembly (PN: 5998-01-700-8350)This subcontract involves the supply of 2,000 circuit card assemblies, specifically part number 5998-01-700-8350, for prime contractors delivering to the DLA Land and Maritime. The selected supplier is responsible for manufacturing or sourcing the components and providing comprehensive post-award traceability documentation to ensure the origin and authenticity of the parts. Managed by the Active Devices Division of the Department of Defense under NAICS code 334412, the contract requires the supplier to coordinate shipment approvals with the Contracting Officer. The solicitation was posted on September 3, 2026, with a response deadline of September 11, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supplier of Linear MicrocircuitsThis subcontract involves the supply of seven linear microcircuits under FSC 5962 to prime contractors supporting Department of Defense DLA supply contracts. The supplier is responsible for delivering the hardware along with essential compliance documentation, including traceability records, test reports, and Material Safety Data Sheets. To ensure quality and security, the provider must complete DLA L&M Form 918 in accordance with established counterfeit detection and avoidance standards. Managed by the Active Devices Division, the contract falls under NAICS code 334412 and specifies Columbus, Ohio, as the place of performance. The solicitation was posted on September 3, 2026, with a response deadline of September 14, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CONTROL PANEL, TEST

Solicitation # SPE7M8-26-T-6409

This contract solicitation, numbered SPE7M8-26-T-6409, is issued by the Department of Defense Electrical Devices Division for the procurement of seven test control panels under NSN 6625-01-421-1316. The delivery timeline is set for 390 days after receipt of order, with the place of performance located in New Cumberland, Pennsylvania. The agreement mandates strict adherence to cybersecurity and export control standards, requiring CMMC Level 2 certification and compliance with ITAR and EAR regulations for the handling of technical data. Additionally, the contractor must follow DLA packaging requirements, ensure the removal of government identification from non-accepted supplies, and certify that no class I ozone-depleting chemicals are used in the production of the items.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPE4A5-26-T-373Q

This contract is for the procurement of one circuit card assembly, identified by NSN 5998015703389 and Honeywell part number 8531176-901. The order is managed under solicitation SPE4A5-26-T-373Q with a delivery timeline of 171 days after order. The item is designated as a critical application item and must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and covered defense information protocols. Rigorous packaging standards are required, specifically MIL-PRF-81705 for electrostatic discharge and electromagnetic interference protection to prevent damage to pins and leads. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

ELECTRONIC COMPONENTS

Solicitation # SPE7M0-26-T-072N

This contract, identified as SPE7M0-26-T-072N, is a solicitation by the Department of Defense Maritime Supply Chain ESOC Buys for the procurement of one electronic components assembly. The item is identified by NSN 5998-01-698-9810 and part number 401/E5206 from JCB Inc. The required delivery date is September 3, 2026, with a delivery timeframe of five days after receipt of order. The shipment is designated as FOB Origin with inspection and acceptance occurring at the destination. The goods are to be delivered to the AWCF SSF Rotational Force Korea at Lewis McChord, Washington. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. The contract is managed under NAICS code 334412.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M5-26-Q-0989

This contract is a firm fixed price solicitation for the procurement of two circuit card assemblies, identified by part number 5998-01-700-8350. The items are classified as commercial off-the-shelf products and must adhere to the technical data provided in basic drawing 16236 RE-017008350 Revision D. The contractor is advised to utilize MIL-PRF-31032 for printed circuit boards and ensure laminate materials meet quality standards equivalent to the cancelled MIL-S-13949. The agreement mandates strict compliance with DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required for specific components. Delivery is required within 227 days after order, with the final destination and acceptance point located at the Joint Logistics Unit East in Moorebank, Australia.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land Warren

Same awarding agency

Crankshaft, Engine

Solicitation # SPRDL1-26-R-A038

The Department of Defense, through DLA Land Warren, has issued a sources sought notice under solicitation SPRDL1-26-R-A038 for the procurement of engine crankshaft assemblies. This specific component, identified by NSN 2815-01-233-9709 and part numbers 12254249 and 388010002, is designed for the AVDS-1790 Diesel Engine used in M88 vehicles. The requirement falls under NAICS code 333618. Currently, RENK America, LLC and TECMOTIV (USA), Inc. are the only approved sources for this item. Any new potential sources must undergo a qualification process prior to approval. Interested parties must submit their responses by September 21, 2026, to the primary point of contact, Kimberly Houghton.

Other Engine Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Panel, Indicating, Light Transmitting

Solicitation # SPRDL1-26-Q-A004

Sources Sought Notice SPRDL1-26-Q-A004 is issued by the DLA Land Warren for the procurement of Light Transmitting Indicating Panels, identified by NSN 6220-01-710-8428 and part number 12674732-4. These panels are critical components for the M1A2 Family of Vehicles Abrams Tank and feature engraved symbols or text on transparent materials to facilitate light transmission for indicating purposes. The requirement consists of a base quantity of 18 units with an additional option for 18 units. This notice is not an open solicitation but a request for sources to undergo qualification testing and evaluation to become approved vendors. Interested parties must submit their responses by September 17, 2026. Achieving approved source status does not guarantee a contract award but allows the vendor to compete for future solicitations related to this equipment.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Squib, Electric

Solicitation # SPRDL1-26-R-A032

The Department of Defense, through DLA Land Warren, is conducting a sources sought notice under solicitation SPRDL1-26-R-A032 for the procurement of 1,240 electric squibs, with an additional option for 1,240 units. These components are used in the Joint Light Tactical Vehicle to enable an adjustable active suspension feature that lowers the vehicle height for transport in aircraft and naval ships. The current specified part is manufactured by Amerex Corporation under part number 20640-040. This market research effort aims to identify potential alternative sources of supply, as the government lacks the full data rights and drawings necessary for competitive procurement. Interested contractors must be able to meet the requirements of the Source Approval Program, which includes vehicle level qualification testing at the contractor's own expense. Responses to this voluntary capability survey are due by September 18, 2026.

Explosives Manufacturing

POSTED

DEADLINE

Cylinder Assembly, Actuator

Solicitation # SPRDL1-26-Q-A011

The Defense Logistics Agency Land Warren is issuing a sources sought notice under solicitation SPRDL1-26-Q-A011 to identify capable providers for a Cylinder Assembly, Actuator, identified by NSN 3040014745370 and MFPN 12446292-1. This notice is for planning purposes only and does not constitute a formal request for proposal or a guarantee of future procurement. The requirement is designated as a total small business set-aside under NAICS code 333613. Interested parties must submit their company details, including their DUNS number, Cage Code, size status, and a capability statement to demonstrate their ability to provide the item. All inquiries and responses should be directed to the contract specialist, Rosanna Madigan, by the deadline of September 18, 2026. The government will not reimburse any costs incurred by respondents during this information-gathering phase.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPRDL1-26-R-A031

The Defense Logistics Agency Weapons Support, Warren, has issued a Sources Sought Notice under solicitation number SPRDL1-26-R-A031 to identify potential suppliers for a Drum Winch, identified by NSN 3950-01-422-0905 and MFPN 03159. This is an information-gathering effort for planning purposes and does not constitute a formal Request for Proposal or a guarantee of future procurement. Interested parties must submit their company details, including DUNS number, Cage Code, size status, and a capability statement to demonstrate their ability to provide the required item. All inquiries and responses should be directed to the contract specialist, Rosanna Madigan. The deadline for submitting questions is September 17, 2026. Because this is a market research activity, the government will not reimburse any costs associated with responding to this notice. Potential offerors are encouraged to monitor SAM.gov for any official solicitations that may result from this process.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

Specialized Housing/Container Fabrication

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Common Ethernet Switch Container Supply

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Qualification Testing Services for TACOM Parts

Testing Laboratories and Services

POSTED

DEADLINE

Approved Source Manufacturer for TACOM NSNs

POSTED

DEADLINE

Solicitation # SPRDL126RA016

The Department of Defense, through DLA Land Warren, is seeking a provider for the EMU MOD KIT, identified by NSN 2835015884315 and part number 57K6442. This equipment is intended for use with the Abrams end item. The contract involves a basic quantity of 57 units with an additional option for 57 more. This presolicitation, numbered SPRDL126RA016, is designated as a total Small Business Set Aside under NAICS code 334419. Interested parties must respond by September 16, 2026. Primary coordination for this requirement is managed by Colin O'Leary and Ralph McCarthy at the office located in Warren, Michigan.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Valve Assembly, Manifold

Solicitation # SPRDL1-26-Q-A009

The Department of Defense, through DLA Land Warren, is issuing a request for quote for a fixed firm price contract to procure Manifold Valve Assemblies, identified by NSN 4820-01-680-2488 and part number 7370470. The requirement includes a base quantity of 10 units with an additional option for 10 more, with delivery terms set as FOB Destination. This opportunity is designated as a total small business set aside under NAICS code 332912. The solicitation is expected to be issued on October 15, 2026, with offers due by November 16, 2026. All responsible sources are invited to submit offers for consideration.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

COMMON ETHERNET SWITCH CONTAINER

Solicitation # SPRDL126RA015

The Department of Defense, through DLA Land Warren, intends to award a firm-fixed-price contract for the procurement of 1,782 Common Ethernet Switch Containers, identified by NSN 7025016747196 and Part Number 57K7316. These components are designated for the Abrams M1A2 SEPv3 end item. This is a sole-source procurement, as General Dynamics Land Systems (CAGE 7W356) is the approved source for the product. The solicitation is expected to be released on or about October 1, 2026, with a response deadline of November 13, 2026. Access to the Technical Data Package (TDP) via SAM.gov is restricted and requires offerors to be certified under the United States/Canada Joint Certification Program (JCP). To obtain this certification, firms must submit DD Form 2345 via mail, as electronic submissions are not permitted. Once certified, firms must specifically request access to the TDP through the Contract Opportunities website. There are no option quantities associated with this basic requirement.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE