Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

City of Rialto Septic-to-Sewer Disadvantaged Communities Project

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The State Water Resources Control Board is serving as the Responsible Agency for the City of Rialto Septic-to-Sewer Disadvantaged Communities Project, designated under Project Number 8825-110, with funding provided to support the transition of approximately 221 residential properties from individual septic systems to a centralized municipal sewer system in underserved areas of Rialto, California. The project encompasses a full range of activities including administrative oversight, community outreach, feasibility analysis, environmental documentation, and detailed engineering design, all aimed at ensuring a thorough and equitable transition process that addresses public health and environmental concerns linked to aging septic infrastructure. Project implementation is being coordinated through a partnership between the State Water Board and the City of Rialto, with key contacts including Cedric Irving, Environmental Scientist at the State Water Board, and Sachin Chawla, Director of Utilities for the City of Rialto, who serve as the primary points of communication. The project is currently in the forecasting phase, with a posted date of May 29, 2026, and will proceed with comprehensive planning to confirm septic system locations, engage local residents, secure necessary permits, and develop technical designs that meet regulatory standards and community needs. All activities are designed to fulfill grant requirements while advancing equitable infrastructure improvements for disadvantaged communities in Rialto.

General Info

State Water Board funds Rialto project to convert 221 septic homes to sewer system for disadvantaged communities.

Agency

California → City of Rialto

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Rialto, CA

Set-Aside

NONE

Documents

(1)

Notice of Exemption for City of Rialto Septic-to-Sewer Project 8825-110

PDFnotice-of-exemption

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

Posted

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia → City of Rialto
Contacts2 people available
OfficeN/A
Organization / Agency
California → City of Rialto
Office AddressN/A
Contacts
Cedric IrvingEnvironmental Scientist
Sachin ChawlaDirector of Utilities

Full Description

Show more
The State Water Resources Control Board (State Water Board) is a Responsible Agency for the Project. The State Water Board is funding the Project referred to internally as City of Rialto Septic-to-Sewer Disadvantaged Communities Project. The Project consists of tasks including project administration, outreach, planning, design, and grant reporting. These activities will be carried out to confirm the location of existing septic systems, engage the community, conduct a feasibility study, prepare environmental documentation, and develop engineering designs. The future goal is to transition approximately 221 residential properties from outdated septic systems to a centralized sewer system in disadvantaged areas of Rialto. PROJECT NUMBER: 8825-110

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT
Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water
GHD Inc. is soliciting qualified subcontractors to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County and Southern California, with a focus on engaging Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other certified small businesses. The scope of work encompasses a broad range of professional services including engineering, environmental consulting, surveying, geotechnical analysis, permitting, public outreach, and utility location, under NAICS code 541330 and several related codes. Participation is open to firms certified under SBA set-aside programs such as Small Business, Small Disadvantaged Business, Women-Owned Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, as well as DBEs recognized by the Department of Transportation. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents no later than 5 p.m. PST on August 14, 2026, with final proposals due by September 15, 2026. All communications should be directed to Charlie Brown at charles.brown@ghd.com or by phone at 404-543-7342.
GHD Inc.

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Corydon Well Replacement (C2305)
Solicitation # C2305
Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under contract number C2305. The project involves designing a new municipal groundwater production well to replace and decommission the existing Corydon well, with work split into two phases: Phase 1 focuses on civil site design, technical specifications, line-bid items, drilling, well abandonment, bidding assistance, and full-time on-site construction management oversight consistent with Riverside County and California State Water Resources Control Board requirements; Phase 2 entails detailed architectural, structural, mechanical, electrical, and instrumentation and controls design for equipping, testing, and commissioning the new well. Key deliverables include a Preliminary Design Report at up to 30% design completion, review of approximately 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes along with start-up and operator training support. The design must adhere to AWWA standards, including a 24-inch diameter stainless steel Ful-Flo louvered well screen matching existing vertical turbine pump systems, with discharge piping tied into the Corydon Blend station and Malaga blending location. The solicitation requires full compliance with federal regulations including FAR clauses referenced under 2 CFR Subtitle A, Part 200, 2 CFR 1400, 2 CFR 1401, and 48 CFR 52.203-17 for subcontracts over the simplified acquisition threshold. Proposers must submit a comprehensive proposal organized into specified volumes including a cover letter validating the cost proposal’s 180-day validity, detailed project approach, staff resumes with appropriate licenses, representative project history from the past five years, three references, district contract history, and a fully itemized cost proposal broken down by task including hourly rates, travel, and incidental costs. Attachments mandated in the proposal include the American Iron and Steel Certification, Certification Regarding Lobbying, Debarment and Suspension Certification, SAM Information form, DBE consultant information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Requirements Acknowledgment, and Public Works Contractor Registration Certification. DBE participation is required, with bidders submitting detailed data on all DBE subconsultants including firm name, contact details, certification numbers, years in business, and justification for any DBE not
Ardurra Group, Inc.

POSTED

about 6 hours ago

DEADLINE

in 25 days
View Details
NAICS: 541330
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # WO# C2305
The Corydon Well Replacement Project involves designing a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well on Elsinore Valley Municipal Water District property, with full engineering, construction management, and regulatory compliance services required across two distinct phases. Phase one focuses on technical specifications, civil site design, line-bid items, and full-time on-site construction management oversight for well drilling and abandonment, adhering to Riverside County and California State Water Resources Control Board standards, including matching existing casing depth and installing sanitary seals per AWWA potable water well construction guidelines. Phase two encompasses engineering for the wellhead infrastructure—covering architectural, civil, mechanical, structural, electrical, instrumentation, and controls design—alongside supporting the bidding process and providing ongoing construction engineering services during equipping, testing, and commissioning. The project demands comprehensive hydrogeological analysis, borehole geophysical logging, environmental permitting, water-quality sampling, geotechnical investigations, utility coordination, and full compliance with the Build America, Buy America Act, requiring documentation of domestic sourcing for iron, steel, and manufactured products, as well as adherence to federal procurement rules under 2 CFR Part 200. All work must be performed in alignment with California state and local regulations, including NPDES, SWRCB, and Drinking Water Source Assessment and Protection requirements. The project is funded through a combination of a $400,000 Bureau of Reclamation grant and non-federal cost share, with a total contract value not to exceed $1,000,000. The successful proposer must demonstrate deep experience in municipal groundwater well design, public agency collaboration, and construction management, with a qualified team including licensed California professionals and key personnel identified by name, resume, and credentials. Proposals must include detailed cost breakdowns by task, hourly rates, travel, and incidental expenses, along with compliance certifications for debarment status, lobbying restrictions, executive order N-6-22, American Iron and Steel requirements, and public works registration. Subcontractors must be disclosed, with special emphasis on participation by certified Disadvantaged Business Enterprises, Women-Owned Small Businesses, and Minority Business Enterprises. Proposals are submitted via the PlanetBids vendor portal by the deadline, and award will be based on a weighted evaluation of qualifications, understanding of the project, technical approach, schedule, innovation, cost, and overall proposal quality, with the lowest bid not being the decisive factor. The contract will be executed via EVMWD’s Professional Services Agreement,
GEI Consultants, Inc.

POSTED

about 6 hours ago

DEADLINE

in 25 days
View Details
NAICS: 541330
New
SLED
Architectural Engineering Services for Texas Department of State Health Services (DSHS) Public Health Laboratory (DPHL2)
Solicitation # 0006457
The Texas Facilities Commission is soliciting qualified architectural and engineering firms to provide prime professional services for the design of the new DSHS Public Health Laboratory 2, a 220,000-square-foot facility adjacent to the existing campus in Austin, Texas. The project, funded by state legislative appropriation, will include BSL1 and BSL2 laboratory spaces totaling 200,000 GSF for newborn screening and a separate 20,000 GSF BSL3 facility, designed to support current operational demands while enabling future growth and technological advancement. The total estimated construction cost is $200 million, and the A/E team must collaborate closely with DSHS, the Project Management Firm Kitchell CEM, the Construction Manager at Risk, and multiple stakeholders to deliver a technically complex, flexible, and scalable laboratory environment that furthers the state’s public health mission. The contract term spans approximately 1,460 calendar days, with services required to begin within ten days of a Notice to Proceed. Submissions must be received by 3:00 PM on September 4, 2026, and firms are required to attend at least one of two mandatory pre-submittal teleconferences held on August 18 and 19, 2026, with registration mandatory for participation. Responses will be evaluated based on qualifications and historical performance, with no interviews initially scheduled unless determined necessary by TFC after the submission review. Notification of interview selection is expected by September 16, 2026, if interviews are required, with award anticipated by October 15, 2026, and contract execution planned for November 1, 2026. Compliance with Texas Government Code Chapter 2166.203 is enforced, with the RFQ issue date serving as the official trigger for the 30-day notification requirement. All proposals must be submitted through the designated Texas SmartBuy portal, and failure to attend a mandatory pre-submittal conference will result in disqualification.
Texas Facilities Commission

POSTED

about 6 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541330
New
SLED
Tatham Connector Design & Construction Admin Services
Solicitation # BD-27-1347-W195-01-132202
The Town of West Springfield is soliciting sealed proposals from qualified architects and engineers to provide design and construction administrative services for a new connector building linking Tatham Elementary School with an existing modular structure. The project requires comprehensive professional services including schematic design, design development, construction documentation, bid process administration, and ongoing construction oversight to ensure the connector meets safety, functional, and code compliance standards. Proposals must demonstrate relevant experience in educational facility projects and a proven ability to manage design and construction phases efficiently. The solicitation number is BD-27-1347-W195-01-132202, with submissions due by September 2, 2026, at 4:00 PM, and all materials must be submitted in accordance with the official Request for Qualification package available on the town’s procurement website. The work will be performed exclusively at Tatham Elementary School in West Springfield, Massachusetts, with all project deliverables subject to town approval. The contracting entity is the Central Maintenance Division under the Massachusetts state agency designation W195, and all communications and inquiries should be directed to Jaime Flores, the designated primary point of contact. This solicitation is open to qualified firms without set-aside restrictions, and proposals must include detailed information on qualifications, past performance, key personnel, and proposed methodology. The response deadline is strictly enforced, and late submissions will not be considered. Selected firms will be expected to coordinate closely with school officials, local authorities, and construction teams to minimize disruption to ongoing school operations while delivering a safe, accessible, and durable connector facility. All technical and administrative requirements are governed by the town’s procurement policies and applicable state regulations.
W195 - Central Maintenance

POSTED

about 7 hours ago

DEADLINE

in 26 days
View Details
NAICS: 541330
New
Federal
Worldwide Environmental Engineering Services
Solicitation # 19AQMM26R0323
The U.S. Department of State, through its Bureau of Overseas Buildings Operations, is soliciting proposals for a five-year Firm-Fixed-Price Indefinite Delivery/Indefinite Quantity contract to provide comprehensive environmental engineering services at U.S. diplomatic facilities worldwide. This contract, identified as 19AQMM26R0323, is a total small business set-aside under NAICS code 541330 with an estimated total value of $4.5 million, covering a base year and four one-year options, each worth $900,000. The contract requires a qualified environmental engineering firm—either as a prime or joint venture—with the technical competence to deliver asbestos and lead-based paint inspections, hazardous materials assessments, indoor air quality investigations, mold and radon testing, environmental site assessments, and remediation oversight in compliance with EPA AHERA, DOD 5220.22-M, and other federal and international standards. All work will be performed globally, including in high-threat locations, with administrative coordination based in Grassy Creek, Virginia, and oversight managed from Washington, DC. Proposals must be submitted electronically via SAM.gov by August 17, 2026, under a three-stage evaluation process mandated by the Brooks Act. The first stage assesses the technical qualifications of the lead team and core personnel, including certifications such as Certified Industrial Hygienist, Certified Hazardous Materials Manager, and Certified Safety Professional. The second stage evaluates the proposed team structure, project management approach, and past performance on similar projects. Only the most highly qualified offerors will be invited to submit pricing in the third stage, where cost becomes a factor in a best-value trade-off, not the primary determinant. A critical requirement is possession of, or eligibility to obtain, a DCSA Top Secret Facility Clearance and an approved classified information system; foreign ownership, control, or influence is prohibited unless fully mitigated under DCSA-approved protocols. Offerors must be U.S.-organized entities with active SAM.gov registrations and valid Unique Entity IDs. The contract will commence on May 16, 2027, and conclude on May 15, 2032, with acceptance of deliverables occurring at the site of performance, including overseas diplomatic posts and domestic OBO facilities.
Acquisitions - Aqm Momentum

POSTED

about 10 hours ago

DEADLINE

in 25 days
View Details
NAICS: 541330
New
Federal
Bradley Fire Control Subsystems
Solicitation # SPRRA2-26-R-SP02
The Bradley Fire Control Subsystems requirement is for on-site technical support to assist with integration, testing, diagnostics, and troubleshooting of the Improved Bradley Acquisition Subsystem and TOW 2 Subsystem at the Cherokee Nations facility in Huntsville, Alabama. This support, lasting up to sixty days, includes engineering and logistics expertise to enable system checkout, fault isolation, test validation, and real-time guidance for government and Cherokee Nations personnel. The effort is being executed under the existing contract SPRRA2-23-D-0015 and is not a competitive solicitation. Only On-Point Defense Technologies LLC, with CAGE code 6MD81, is eligible due to the proprietary nature of the technical data, which renders competitive acquisition infeasible under FAR 6.302-1(a)(2). All communications must be directed via email to Kimberly S. Thomas at Kimberly.thomas@dla.mil, with the subject line “SPRRA2-26-Q-SP02” and must include the sender’s name, company name, CAGE code, and contact details. Responses are due by August 21, 2026, though the deadline is subject to adjustment based on solicitation release timing. Foreign firms must route inquiries through their embassies, and non-qualified entities are encouraged to pursue source approval for future opportunities. The contracting office is headquartered at Fort Belvoir, Virginia, with a designated place of performance in Fort Walton Beach, Florida.
Hq Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
Federal
Worldwide AE Support Services
Solicitation # 19AQMM26R0258
The U.S. Department of State, through its Bureau of Global Acquisitions and Acquisitions Management on behalf of the Bureau of Overseas Buildings Operations, is initiating a pre-solicitation for an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to obtain worldwide architectural and engineering (A/E) support services under solicitation number 19AQMM26R0258. This procurement follows the Brooks Act process outlined in FAR 36.202 and will be conducted in three stages: pre-qualification, technical evaluation, and price proposal submission. The contract will provide design, planning, construction, and rehabilitation services for U.S. diplomatic facilities globally and in the Washington, DC area, encompassing disciplines such as structural and seismic engineering, climate security, historic preservation, geotechnical work, fire protection, building forensics, and project management. The primary place of performance is Arlington, Virginia, but services may be delivered at any U.S. embassy or consulate worldwide. Only U.S.-based firms eligible as United States Persons under the Omnibus Diplomatic Security and Antiterrorism Act of 1986 may apply; foreign firms and entities under Foreign Ownership, Control, or Influence without approved mitigation are excluded. All offerors must be able to obtain a Secret Facility Clearance from the Defense Counterintelligence and Security Agency within 180 days of award and must possess a DCSA-approved information system for handling classified material. The technical evaluation will assess team qualifications, management plans, and past performance before price is considered solely for fairness and reasonableness, not competitive scoring. Participation requires SAM registration, and submissions must be made electronically via SAM.gov, with the initial qualification package due by July 15, 2026. The resulting IDIQ contract will include mechanisms for on-ramping new contractors and off-ramping underperforming firms, with pricing details and contract terms to be defined in the formal solicitation to be released later.
Acquisitions - Aqm Momentum

POSTED

about 10 hours ago

DEADLINE

in 2 months
View Details
NAICS: 541330
New
Federal
EURAFCENT Multiple Discipline Support Services - Multiple ROICC Offices
Solicitation # N3319126R0033
This contract supports Resident Officer in Charge of Construction offices across the NAVFAC EURAFCENT area of responsibility by delivering construction management, quality assurance, and administrative services for ongoing construction contracts. It also encompasses professional architectural design, planning, and administrative support specifically for the NAVFAC EURAFCENT Headquarters in Naples, Italy. Only SEAPORT MAC holders are eligible to compete for this award, and the work will be performed across various locations within the EURAFCENT region, with administrative oversight centered in Naples. Services are critical to ensuring timely, compliant, and high-quality delivery of construction projects under NAVFAC’s maritime and expeditionary infrastructure programs. The solicitation, identified as N3319126R0033 and classified under NAICS code 541330, was posted on August 7, 2026, with a response deadline of September 8, 2026. The contracting office is part of the Department of Defense, operating under NAVFAC Systems Command Europe Africa Central, with primary point of contact Paul Martha reachable via email. The office address is listed as FPO AE 09622-0051, reflecting a deployed or military postal location, while performance locations span multiple sites throughout the EURAFCENT AOR without a single centralized physical location specified. This contract targets experienced defense contractors capable of managing complex, geographically dispersed construction environments with high standards of oversight and compliance.
Navfacsyscom Europe Africa Central

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details