This Government Contract opportunity from Texas was posted on June 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CNC Equipment Installation and Commissioning

Closed

State & Local

Submission Closed07/13/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811212

New

Federal

Specialized Equipment Overhaul (Part 2950-12-390-5601)This subcontract, managed by the Department of Homeland Security's Sflc Procurement Branch 1, involves the technical overhaul of four units of U.S. Coast Guard equipment, specifically part number 2950-12-390-5601. The selected provider will perform preliminary inspections to define the scope of work, execute necessary technical repairs, and ensure all units are restored to service-ready condition according to strict technical specifications. Due to the complexity of the restoration, the project requires specialized technical data and capabilities. The primary objective is the delivery of four fully restored units. This opportunity was posted on September 16, 2026, with a response deadline of September 18, 2026, falling under NAICS code 811212.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Copier and Document Imaging MaintenanceThis subcontract for the State of Alabama's Communication and Information agency focuses on the preventative and corrective maintenance of copier and document imaging equipment. The selected provider will be responsible for conducting routine inspections, performing on-call repairs, and managing hardware and software troubleshooting using manufacturer-approved parts and diagnostic tools. The primary objective is to ensure a fully operational imaging fleet, with the requirement to provide detailed service reports upon completion of tasks. The opportunity is categorized under NAICS code 811212 and requires the contractor to be enrolled in E-Verify and registered for Alabama state taxes. Interested parties must adhere to the response deadline of September 18, 2026. This engagement supports prime contractors in maintaining critical office infrastructure to ensure continuous operational efficiency.

Communication & Information

POSTED

DEADLINE

Maintenance and Repair of Sharp MX-5071 CopierThis subcontract involves the routine maintenance and repair of a Sharp MX-5071 Copier to support prime contractors on State of Alabama Sales and Use projects. The scope of work includes preventative maintenance, technical support, and hardware troubleshooting conducted according to manufacturer specifications. To ensure quality and operational efficiency, the contract requires the use of genuine replacement parts and the employment of Sharp-certified technicians. The primary objective is to deliver a fully operational copier supported by detailed maintenance logs. This opportunity was posted on September 15, 2026, with a response deadline of September 21, 2026. The project falls under NAICS code 811212 and is managed by the Alabama agency for Sales and Use.

POSTED

DEADLINE

Printer Installation and Configuration TechnicianThis subcontract for the Jamaica Customs Agency involves the physical installation and technical setup of colored multifunction printers within the Internal Review and Appeal unit. The selected technician is responsible for unpacking, placing, configuring connectivity, and testing the equipment to ensure a fully operational system is delivered to the prime contractor. Qualified candidates must possess technical certification in printer maintenance or IT hardware installation. The project falls under NAICS code 811212 and is managed by the Government of Jamaica.

Jamaica Customs Agency

POSTED

DEADLINE

Technical Support and Maintenance ProviderThe Government of Ontario, specifically the Ministry of Environment, Conservation and Parks, is seeking a Technical Support and Maintenance Provider under a subcontract agreement. The selected provider will support prime contractors by managing technical inquiry communication chains, executing issue escalation processes, performing manufacturer-scheduled maintenance, and conducting instrument performance testing. Key deliverables include the submission of detailed maintenance logs and performance reports. To qualify, providers must have OHSA-competent personnel and a written health and safety policy that complies with OHSA standards. This opportunity, categorized under NAICS code 811212, was posted on September 15, 2026, with a response deadline of October 13, 2026.

Environment, Conservation and Parks

POSTED

DEADLINE

Digital Decoder & Receiver Support (Tier 4)This subcontract for Digital Decoder and Receiver Support (Tier 4) involves providing technical services for prime contractors on U.S. Navy NAVSUP FLCY projects. The scope of work includes troubleshooting, alignment, and replacement of digital receivers and decoders, specifically supporting Draco DVB-T2 and PBI DCH-3100P units. Key responsibilities include managing RF output balance, audio and video synchronization, and performing channel lock and signal alignment for AFN and FTA channels to ensure functional streams. The contract is managed by the Department of Defense under the Navsup Flt Logistics Ctr Yokosuka, with a NAICS code of 811212. Personnel assigned to this project must possess the necessary base access clearance to perform the work. The solicitation was posted on September 15, 2026, with a response deadline of September 24, 2026.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Circuit Card Assembly (CCA) Repair and OverhaulThis subcontract with the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the repair and overhaul of 60 Circuit Card Assemblies under NIIN 015295211. The contractor is required to restore these assemblies to A condition stock by adhering to standard overhaul practices, technical orders, and specific drawings. Additionally, the contractor must use automatic identification technology devices to ensure all machine readable labels comply with MIL-STD-130, Appendix A. The project falls under NAICS code 811212 and requires the final delivery of 60 fully repaired assemblies. The solicitation was posted on September 15, 2026, with a response deadline of October 1, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

AC Electrical Motor Repair and OverhaulThis subcontract for AC Electrical Motor Repair and Overhaul involves the overhaul and testing of AC electrical motors for prime contractors supporting US Coast Guard T-Boat dry-dock projects. The scope of work includes performing motor rewinds and electrical diagnostics strictly in accordance with SFLC Std Spec 3020 to ensure the delivery of fully refurbished and tested equipment. The project is managed by the Department of Homeland Security under Hq Contract Operations and will be performed in New London. This opportunity falls under NAICS code 811212, with a posting date of September 15, 2026, and a response deadline of September 29, 2026.

Hq Contract Operations (CG-912)(000

POSTED

DEADLINE

Screening Equipment Installation and Technical SupportThe Screening Equipment Installation and Technical Support subcontract, managed by the Department of the Treasury's Office of the Chief Procurement Officer, focuses on the installation, configuration, and technical support of hazard-detection systems for Treasury Common Services Center projects. The selected provider will be responsible for system integration, setup, and transition support, utilizing specialized tools and software to calibrate and install irradiation apparatus. A key requirement for this role is the possession of technical certifications relevant to the specific hardware being deployed to ensure the delivery of a fully operational and calibrated screening system. This opportunity is based in Washington, DC, and falls under NAICS code 811212. Interested parties must submit their responses by September 30, 2026, following the posting date of September 15, 2026.

Office Of The Chief Procurement Officer

POSTED

DEADLINE

Hologic Thin Prep 2000 Technical Service & MaintenanceThis subcontract provides specialized technical service and operational support for government-owned Hologic Thin Prep 2000 instruments within the Pathology and Laboratory Medicine Service at the Augusta VAMC. The primary objective is to ensure laboratory instruments remain maintained and operational through the delivery of expert technical maintenance and support. The project is managed by the Department of Veterans Affairs under the 247-NETWORK Contract Office 7. A critical requirement for this engagement is that all service must be performed by factory-certified technicians for Hologic equipment. The opportunity is categorized under NAICS code 811212 and is located in zip code 30904.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Audio Control Panel Component-Level RepairThis subcontract with the Department of the Navy, specifically Navsup Weapon Systems Support, involves the component-level repair of Audio Control Panels for US Navy electronics overhaul projects. The scope of work includes the teardown, evaluation, cleaning, and reassembly of units, with a specific requirement for soldering performed according to IPC/EIAJ-STD-0001. Contractors must utilize electronics diagnostic tools and soldering stations to ensure all repaired panels undergo operational reliability testing and are delivered certified as Ready for Issue. The project is based in Philadelphia, Pennsylvania, under NAICS code 811212. Interested parties must submit their responses by October 15, 2026, to meet the requirements of the prime contractors overseeing these electronics overhauls.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flow Control Regulator Repair and OverhaulThis subcontract for the Department of the Navy's Navsup Weapon Systems Support Mech involves the teardown, evaluation, repair, and modification of Flow Control Regulators. The selected provider will be responsible for disassembling units to identify failure points and restoring them to operational specifications according to TDP Version No. 05. Final deliverables must include fully repaired and certified regulators equipped with DLR labels. The project is based in Mechanicsburg and requires the contractor to maintain ISO 9001 certification and the capability to provide Unique Item Identifiers. This opportunity is designated as an SBA set-aside under NAICS code 811212, with a response deadline of October 15, 2026.

Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 29 days

AI Contract Overview

The contract titled CNC Equipment Installation and Commissioning requires on-site installation, integration, calibration, and startup support for CNC machines, encompassing full mechanical and electrical setup as well as comprehensive operational testing to ensure system readiness. The work must be performed at the designated location under the oversight of the Texas A&M University System, with all activities aligned to industry standards for precision machine commissioning. The solicitation is issued as a subcontract and is open to qualified vendors capable of delivering technical expertise in CNC system deployment, including hands-on field support during initial operations. Responses are due by July 13, 2026, and the contract falls under NAICS code 811212, which classifies it within repair and maintenance services for industrial machinery and equipment. While no specific city or state is listed for performance or agency address, the procurement is managed through the Texas A&M University System using the TX SmartBuy platform, indicated by the provided UI link. The posting date is June 26, 2026, and the procurement does not specify any set-aside status or point of contact details, leaving potential bidders to rely on the official solicitation link for additional requirements and submission guidelines.

General Info

CNC machine installation and commissioning by qualified vendors for Texas A&M University System, due July 13, 2026.

Agency

Texas A&M University System

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of TAMUS-ITB-26-0540.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CNC Equipment

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 26

subcontract

Response DeadlineJul 13

Deadline has passed

Submission Closed

07/13/2026, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas A&M University System

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas A&M University System

Office AddressN/A

ContactsNo contact information available

Full Description

On-site installation, integration, calibration, and startup support for CNC machines, including mechanical/electrical setup and operational testing.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS