This Solicitation opportunity from Department Of Defense was posted on February 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Coated and Uncoated Webbing

Closed

N68335-26-Q-1033Federal

Submission Closed02/12/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE1C1-27-Q-0173

This fixed-price solicitation from the Defense Logistics Agency (DLA) is for the procurement of 40,000 to 45,000 yards of black nylon pile fastener tape, NSN 8315-00-935-6763. The material must be 100% nylon with a minimum weight of 3.4 grams per linear yard, a minimum breaking strength of 43 pounds, and a minimum thickness of 0.07 inches. The tape must be 0.625 inches wide and conform to Commercial Item Description A-A-55126C. Delivery is required within 30 days after order (ADO) with FOB Destination terms. The contractor is responsible for all inspection and testing, though the government reserves the right to perform its own examinations at the destination. Quality assurance must comply with the DLA Troop Support Clothing and Textiles Additional Quality Assurance Requirements Revision 1 (August 2021). Packaging must adhere to MIL-STD-2073-1E, marking to MIL-STD-129, and palletization to RP001. The contract incorporates several critical FAR and DFARS clauses, including Buy American requirements, safeguarding covered defense information, and prohibitions on certain foreign telecommunications equipment. Payment is processed electronically via the Wide Area WorkFlow (WAWF) system.

POSTED

DEADLINE

Solicitation # SPE1C1-27-Q-0171

Solicitation SPE1C1-27-Q-0171 is a Firm Fixed Price small business set-aside contract issued by the DLA Troop Support C and T Supply Chain for the procurement of 4,000 yards of Fastener Tape, Pile (NSN 8315-00-935-6763). The material, intended for clothing, equipage, and general-purpose closures, must be 100% Nylon, black (US Navy 3230), with a minimum thickness of 0.07 inches, a minimum breaking strength of 43 pounds, and a minimum weight of 3.4 grams per linear yard. The tape must adhere to Commercial Item Description A-A-55126C and the DLA Troop Support Clothing and Textiles Additional Quality Assurance Requirements. Delivery is required within 30 days after order (ADO) with FOB Destination. Inspection and acceptance will occur at the destination, though the government may conduct source inspection for production lot testing. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for corrugated fiberboard exterior containers and ISPM 15 compliant wood packaging. The contract incorporates various FAR and DFARS clauses, including the Berry Amendment for domestic origin preference and DFARS 252.204-7012 for safeguarding covered defense information. Payment processing is mandated through the Wide Area WorkFlow (WAWF) system.

POSTED

DEADLINE

White Woven Heat-Applied Label SupplyThis small business set-aside subcontract through Inc Federal Prison Industries supports Department of Justice projects by providing 1,300,000 units of white woven heat-applied labels, specifically model LBL0454. The labels must be manufactured to dimensions of 1 inch by 3-1/4 inches using woven textile materials and a heat-application adhesive backing. All deliverables must strictly adhere to the specifications outlined in MIL-DTL-32075 Type VI, Page 6, Paragraph 3.4.5. The place of performance for this contract is located in Jesup, Georgia, under NAICS code 313220.

Inc Federal Prison Industries

POSTED

DEADLINE

Solicitation # CT2401-27

Solicitation CT2401-27, issued by the Department of Justice through the Federal Prison Industries (UNICOR), is a total small business set-aside for the procurement of 1,300,000 white woven, heat-applied labels (Item LBL0454). These labels must measure 1 inch by 3-1/4 inches and comply with the technical specifications of MIL-DTL-32075 Type VI, Page 6, Paragraph 3.4.5. The labels are intended for use on contract SPE1C126F6498, and the contractor is required to provide a Certificate of Conformance upon delivery. The procurement is governed by FAR Part 12 Commercial Procedures and mandates strict adherence to the Berry Amendment and DFARS 252.225-7012 regarding preference for domestic commodities. Proposals must be submitted via email to the primary point of contact by November 20, 2026, with pricing held firm for 60 calendar days. Additionally, the contract includes stringent security and privacy requirements, including the necessity for Non-Disclosure Agreements and annual cybersecurity training verification for all personnel accessing government information.

Inc Federal Prison Industries

POSTED

DEADLINE

Solicitation # SPE1C1-27-Q-0122

Solicitation SPE1C1-27-Q-0122 is a firm fixed price, small business set-aside contract issued by the DLA Troop Support, C and T Supply Chain for the procurement of 12,000 service ribbons (NSN 8455-01-126-4024). The contract requires delivery within 120 days after order (ADO) to Arizona Industries for the Blind in Phoenix, AZ, with the FOB and acceptance points set at destination. Award selection is based on the total award price to determine the best value offer, provided that the production and first article testing prices are fair and reasonable. The contractor must provide five first article samples for testing, with notification of results provided within 30 calendar days of receipt. Technical and quality requirements are governed by MIL-DTL-11589/282 and MIL-S-3951D NOT1, while inspection is conducted per FAR 52.246-2. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 DLA Packaging Requirements. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow (WAWF) system using VIM-ASAP.

POSTED

DEADLINE

SERVICE RIBBON, AWARD

Solicitation # SPE1C1-27-Q-0120

Solicitation SPE1C1-27-Q-0120 is a Firm Fixed Price, Small Business Set-Aside procurement issued by the DLA Troop Support C and T Supply Chain for 24,000 units of Service Ribbon, Award (NSN 8455-01-145-6352). The contract requires delivery within 120 days after order, with FOB and acceptance points set at destination. A critical requirement includes the submission of five first article samples to DLA Troop Support in Philadelphia within 30 calendar days of the contract date for government testing and approval. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-11589, with specific requirements for qualification badges to be mounted on sulfite cards in heat-sealed plastic bags. Presidential Service Badges require additional placement in labeled, serially numbered cobalt blue pop-up boxes. Palletization must utilize 4-way winged type pallets per RP001. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. The contractor must also comply with various DFARS and FAR clauses, including cybersecurity safeguarding of covered defense information and Buy American certifications.

POSTED

DEADLINE

Certified Manufacture of Shoulder Sleeve Insignia (Jungle Tabs)This subcontract with C and T Supply Chain for the Department of Defense involves the manufacture of 58,000 full-color, sew-on shoulder sleeve insignia known as Jungle Tabs. The insignia must be produced to specific dimensions of 2-3/8 by 11/16 by 5/16 inches using designated green and black cable materials. Production requires the use of industrial embroidery equipment and mandatory certification by The Institute of Heraldry. The contractor must ensure full compliance with the Berry Amendment regarding the sourcing of materials. This effort supports prime contractors on DLA Troop Support supply contracts, with performance located in zip code 85043. The project is categorized under NAICS code 313220 and requires the delivery of 58,000 finished units.

POSTED

DEADLINE

Solicitation # SPE1C1-27-Q-0060

Solicitation SPE1C1-27-Q-0060 is a Small Business Set-Aside Request for Quotations issued by the DLA Troop Support C and T Supply Chain for the procurement of 8,000 award ribbons for the USMC Combat Instructor. This is a firm-fixed-price acquisition with a delivery requirement of 120 days after the date of order, with shipping and inspection points set to destination. To be eligible for award, bidders must provide an end product manufactured by a vendor certified by The Institute of Heraldry. The contracting officer will determine the best value based on total award price, ensuring that production and first article testing prices are fair, reasonable, and not materially unbalanced. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and MIL-S-3951 for quantity unit packs. A critical requirement is the submission of five first article samples to DLA Troop Support in Philadelphia within 30 days of the award date. Inspection will be conducted in accordance with FAR 52.246-2, utilizing sampling procedures from MIL-STD-1916 or ANSI/ASQ Z1.4. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment processing, and compliance with DFARS cybersecurity and safeguarding standards.

POSTED

DEADLINE

INSIGNIA, SHOULDER SLEE

Solicitation # SPE1C1-27-Q-0167

Solicitation SPE1C1-27-Q-0167 is a small business set-aside request for quotations issued by DLA Troop Support, C and T Supply Chain, for the procurement of 58,000 shoulder sleeve insignia Jungle Tabs. The items are full-color, sew-on insignia with dimensions of 2-3/8 inches in length, 11/16 inches in width, and 5/16 inches in height, utilizing green cable No. 67129 and black cable No. 67138. The contract is a firm fixed price agreement with a delivery schedule of 160 days after order. To be eligible for award, bidders must provide an end product manufactured by a vendor certified by The Institute of Heraldry. The contractor is required to submit five first article samples within 30 calendar days of the contract date, with the government providing notification of approval or disapproval within 30 days of receipt. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging requirements. Inspection and acceptance are set at the destination, and all electronic payment processing must be conducted through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including Berry Amendment requirements for domestic commodities and cybersecurity standards for safeguarding covered defense information.

POSTED

DEADLINE

Gold Braid - 3mm and 5mm

Solicitation # W8486-270843/A

The Department of National Defence is soliciting offers for the supply and delivery of 3mm and 5mm gold braid for depot stock, identified by NSNs 8315-21-904-3899 and 8315-21-872-2982 respectively. The contract follows a 12-month initial term with an irrevocable option for Canada to extend for up to three additional one-year periods. Total cumulative option quantities are capped at 10,500 metres for the 3mm braid and 5,000 metres for the 5mm braid. Deliveries must be made Delivery Duty Paid to the Canadian Forces Supply Depot in Montreal, with firm quantities due within four months of the contract award. Award will be granted to the responsive offer with the lowest aggregate evaluated price in Canadian dollars. To be considered responsive, offerors must submit 30cm samples of each braid width that comply with specification DSSPM 2-2-80-247 and associated sealed patterns. Additionally, the procurement is limited to Canadian goods, requiring certification that at least 80% of the total offer price consists of Canadian products. The contractor must also adhere to strict packaging standards, ensuring materials are reusable, returnable, or recyclable, and must provide one-metre production samples for technical approval before final delivery. Offers are due by November 19, 2026, via email to the designated contracting authority.

Department of National Defence

POSTED

DEADLINE

Solicitation # SPE7LX-27-U-0478

Solicitation SPE7LX-27-U-0478 is a request for quotations issued by the Defense Logistics Agency Weapons Support Strategic Acq Program Directorate for the procurement of elastic straps, NSN 5340-01-714-6013. This is a total small business set-aside for a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and a one year duration. The estimated annual demand is 67 units, with a guaranteed minimum quantity of 10 units once the contract becomes binding. Quotations are due by November 17, 2026, and will be evaluated based on price and other factors to determine the most advantageous offer to the government. The contract specifies a delivery period of 113 days with FOB Origin terms, and inspection and acceptance will occur at the destination. Packaging must adhere to ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all shipments labeled according to MIL-STD-129 and palletized per RP001. Contractors are required to use the Wide Area WorkFlow system for electronic invoicing and payment requests. Additional compliance requirements include CMMC Level 2 Self-Assessment, adherence to the Buy American Act and Berry Amendment, and the prohibition of Class I ozone depleting chemicals.

Defense Logistics Agency

POSTED

DEADLINE

Officer and Healthcare Patches-Columbus Sewing Plant

Solicitation # 52-IFB-2411008474-MLE

The North Carolina Department of Adult Correction is seeking an Agency Specific Term Contract to furnish and deliver officer and healthcare patches for the Columbus Sewing Plant on an as-needed basis. This contract, identified as solicitation 52-IFB-2411008474-MLE, has an initial term of three years and does not guarantee minimum or maximum order quantities. The selected vendor must be a registered North Carolina vendor in good standing and will be evaluated based on the best value to the state, considering factors such as cost, completeness of the bid, promptness of delivery, and suitability for the intended use. Deliveries must be made Free-On-Board Destination to the Columbus Sewing Plant in Whiteville, North Carolina, within thirty calendar days of receiving a purchase order. Strict packaging requirements are in place, including 25 patches per pack shipped in palletized cardboard boxes without metal binding. All labels and packing slips must be in English and include the purchase order number, vendor name, and quantity of goods. Payment is contingent upon the state's inspection and acceptance of the goods. Bids and required samples must be submitted via the Sourcing Tool by December 2, 2026.

Department of Adult Correction

POSTED

24 days ago

DEADLINE

in 19 days

General Info

Agency

Department Of Defense → Navair Warfare Ctr Aircraft Division

NAICS

313220 - Narrow Fabric Mills and Schiffli Machine Embroidery

Place of Performance

CAPE MAY CH, NJ, USA

Set-Aside

SBA

Documents

specifications

High

1 page · sow

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedDec 17

Presolicitation

Type ChangedJan 28

Presolicitation → Solicitation

Notice updatedFeb 3

The notice description changed.

Response DeadlineFeb 12

Deadline has passed

Submission Closed

02/12/2026, 12:00:00 PM EST

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division

Contacts1 person available

OfficeJOINT BASE MDL, NJ, 08733, USA

Organization / AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division

Office AddressJOINT BASE MDL, NJ, 08733, USA

Contacts

Danielle Russo

Full Description

Amendment 001 (03 February 2026) - Correct language from "attachment 001 CLIN structure spreadsheet" to "Attachment 0001 SOW and Requested Drawings".

Solicitation

N68335-26-Q-1033

Coated and Uncoated Webbing

Naval Air Warfare Center Aircraft Division Lakehurst, NJ

__________________________________________________________________________

I. Description of Requirement

The Naval Air Systems Command (NAVAIR), Lakehurst, NJ has a requirement to procure the following:

Nomenclature

Coated Webbing, No Splices, 1-3/4”Wide - P/N: 3491AS2311-300-0 - NSN: N/A - QTY: 300 Rolls
Uncoated Webbing, No Splices, 1-3/4” Wide - P/N: N/A - NSN: N/A - QTY:1000 Rolls

The Government intends to procure the above items through a total small business set-aside.

Offeror certifies that they will deliver items no later than 150 days after the receipt of the award. Delivery shall be made to the Naval Air Warfare Center, Lakehurst, NJ.

Offeror submitting quotations shall submit such quotations valid ninety (90) days after the date of quotation submission.

The resultant contract will be a firm-fixed-price contract.

Solicitation Instructions: (i) This solicitation is issued as a Request for Quotation (RFQ) in accordance with FAR Part 13 solicitation number N68335-26-Q-1033. (ii) The solicitation documents and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-01. (iii) See attachment 001 Statement of Work / CLIN Structure for the list of line items, quantities and units of measure. The associated North American Industrial Classification System (NAICS) code for this procurement is 313220. (iv) The drawings for this requirement are subject to export controls. In order to receive the drawing package for this effort, a vendor must provide a copy of their current DD Form 2345. (v) The specific items for this requirement can be found in the attachment 001 SOW and requested Drawings. (vi) FOB point is destination as well as inspection and acceptance. Any applicable shipping costs shall be factored into the unit price(s) of each item. Do not include a separate line item for shipping charges.

(a)The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

1. The Offerors will be required to provide all part numbers in accordance with the Descriptions and Part Numbers in Attachment 001 of this solicitation. Each Offeror will either be Eligible or Ineligible for award. If an Offeror does not provide the entire list of items, the Offeror will be deemed Ineligible for award.

2. Award will be made to the lowest price responsible Offeror that is deemed Eligible for award. Eligibility shall be determined by the following: Offeror provides an exact match of the part numbers listed in attachment 001 SOW and requested Drawings.

The total evaluated price will be the sum of all CLINs for each part number listed in the attachment 001 SOW and requested drawings. The proposed prices will be evaluated to determine if the Offeror’s prices are fair and reasonable.

The Government intends to evaluate proposals and award the contract without discussions as described in FAR 52.212-1(g); and will evaluate each offer on the basis of the Offeror’s initial offer. Therefore, the initial offer shall contain the Offeror’s best terms. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

FAR 52.203-3: Gratuities

FAR 52.203-6: Restrictions On Subcontractor Sales To The Government (JUN 2020) -- Alternate I

FAR 52.203-12 Limitation On Payments To Influence Certain Federal Transactions

FAR 52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights

FAR 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper

FAR 52.204-7: System for Award Management

FAR 52.204-13: System for Award Management Maintenance

FAR 52.204-21: Basic Safeguarding of Covered Contractor Information Systems

FAR 52.204-24: Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment

FAR 52.204-27: Prohibition on a ByteDance Covered Application

FAR 52.209-7: Information Regarding Responsibility Matters

FAR 52.223-5: Pollution Prevention and Right-to-Know Information

FAR 52.225-18: Place of Manufacture

FAR 52.225-25: Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran—Representation

FAR 52.227-1: Authorization and Consent

FAR 52.227-2: Notice And Assistance Regarding Patent And Copyright Infringement and Certifications.

FAR 52.229-3: Federal, State And Local Taxes

FAR 52.232-39: Unenforceability of Unauthorized Obligations

FAR 52.232-40: Providing Accelerated Payments to Small Business Subcontractors

52.240-1: Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities

FAR 52.242-13: Bankruptcy

FAR 52.252-2: Clauses Incorporated By Reference

DFARS 252.203-7000: Requirements Relating to Compensation of Former DoD Officials

DFARS 252.203-7002: Requirement to Inform Employees of Whistleblower Rights

DFARS 252.203-7003: Agency Office of the Inspector General

DFARS 252.203-7005: Representation Relating to Compensation of Former DoD Officials

DFARS 252.204-7003: Control Of Government Personnel Work Product

DFARS 252.204-7007: Alternate A, Annual Representations and Certifications

DFARS 252.204-7008: Compliance With Safeguarding Covered Defense Information Controls

DFARS 252.204-7009: Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information

DFARS 252.204-7016: Covered Defense Telecommunications Equipment or Services – Representation

DFARS 252.204-7017: Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services – Representation

DFARS 252.204-7018: Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

DFARS 252.209-7004: Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism

DFARS 252.211-7003: Item Unique Identification and Valuation

DFARS 252.211-7008: Use of Government-Assigned Serial Numbers

DFARS 252.215-7008: Only One Offer

DFARS 252.215-7013: Supplies and Services Provided by Nontraditional Defense Contractors

DFARS 252.217-7026: Identification of Sources of Supply

DFARS 252.223-7008: Prohibition of Hexavalent Chromium

DFARS 252.225-7001: Buy American And Balance Of Payments Program—Basic

DFARS 252.225-7002: Qualifying Country Sources As Subcontractors

DFARS 252.225-7007: Prohibition on Acquisition of Certain Items from Communist Chinese Military Companies

DFARS 252.225-7008: Restriction on Acquisition of Specialty Metals

DFARS 252.225-7009: Restriction on Acquisition of Certain Articles Containing Specialty Metals

DFARS 252.225-7012: Preference For Certain Domestic Commodities

DFARS 252.225-7013: Duty-Free Entry—Basic

DFARS 252.225-7048: Export-Controlled Items

DFARS 252.226-7001: Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns

DFARS 252.232-7003: Electronic Submission of Payment Requests and Receiving Reports

DFARS 252.232-7006: Wide Area Workflow Payment Instructions

DFARS 252.232-7010: Levies on Contract Payments

DFARS 252.243-7001: Pricing Of Contract Modifications

DFARS 252.243-7002: Requests for Equitable Adjustment

DFARS 252.246-7007: Contractor Counterfeit Electronic Part Detection and Avoidance System

DFARS 252.246-7008: Sources of Electronic Parts

The textiles of this solicitation are subject to, and shall be in accordance with, the Buy American Act and Berry Amendment. The resulting contract will contain clauses 52.225-1,

252.225-7012, and 252.225-7015 as appropriate.

Additional requirements: Quotes are due by 12:00pm EDT, 12 February 2026 to Danielle Russo at Sign up to see this detail. Please see attachments for the Parts List. All proposals shall meet all requirements as outlined in the attached Parts List. Proposals shall include price, be “FOB: Destination”, with inspection and acceptance at “destination.” Please note that the offeror’s SAM.gov entity registration needs to be active at the time of proposal submission through award in order for the offeror to be able to receive an award. Hard copies of this Solicitation and Amendments will NOT be mailed to the contractors. The Government will accept only electronic proposals.