This Government Contract opportunity from Government of Canada was posted on April 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Compliance Certification and Reporting

Closed

International

Submission Closed05/26/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

SLED

MassDOT Due Diligence FWHA Portable Raman Spectrometer

Solicitation # BD-27-1030-CPO1-CPO1-132151

CPO1 - OFFICE OF THE CHIEF PROCUREMENT OFFICER

POSTED

DEADLINE

Backflow Prevention Device Testing & CertificationThe contract requires annual testing and certification of backflow prevention assemblies across all Texas Department of Transportation facilities to ensure compliance with public health and safety standards. This work is essential to prevent contamination of potable water systems by isolating non-potable sources and maintaining the integrity of the water supply throughout TxDOT operations. Services must be performed in accordance with state and federal regulations, and the contractor must provide documented certification of each tested device to verify compliance. The contract is classified as a subcontract under NAICS code 541380, indicating it falls within the category of other scientific and technical consulting services. The solicitation was posted on August 6, 2026, with responses due by September 8, 2026. There is no designated set-aside type specified, meaning the opportunity is open to all eligible subcontractors regardless of business size or ownership characteristics. Performance will occur at various TxDOT locations throughout the state of Texas, and the contractor must be prepared to access and service devices at multiple sites on an annual basis without disruption to facility operations.

Texas Department of Transportation

POSTED

DEADLINE

Pump Performance Testing and Commissioning

POSTED

DEADLINE

Preclinical Validation and Analytical Support

POSTED

DEADLINE

Quality Assurance and Inspection Services

POSTED

DEADLINE

J035--AIR TESTING AND CERTIFICATION SERVICES

Solicitation # 36C26226Q1235

This solicitation, issued as a combined synopsis and request for quotations under Federal Acquisition Regulation subpart 12.6, seeks Air Testing and Certification Services for the San Diego VA Medical Center under solicitation number 36C26226Q1235. The procurement is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), with a NAICS code of 541380 and a small business size standard of $19.0 million. The contractor must provide AABC-certified testing and certification of critical and non-critical area air systems, including semi-annual testing of all critical rooms and annual testing of approximately one-quarter of the 1,406 non-critical rooms totaling 257,279 square feet. All work must be performed or supervised by independent AABC-certified technicians, and an asbestos-certified technician and controls technician must also be provided to operate automated systems and deliver onsite instruction. Deliverables include certified TAB reports with detailed drawings, air flow measurements, pressure gradients, and calculated air change rates, submitted in six copies within five working days of completion. The contract is anticipated to be awarded as a firm-fixed-price agreement with a base performance period of one year, from September 1, 2026, through August 31, 2027, and includes up to four one-year option periods extending through August 31, 2031. Offers must be submitted electronically by 12:00 PM PST on August 14, 2026, via email to two designated VA addresses, clearly labeled with the solicitation number and contract title, and must be formatted as four separate, unzipped PDF files corresponding to technical approach, pricing, experience, and required documentation. Offers are subject to mandatory certifications including VAAR 852.219-75 and -76, SAM registration, W-9, FMS Vendor File Update Form, and SBA DSBS registry listing. The government will evaluate submissions without discussions, prioritizing the most advantageous offer based on price and other factors, with strict pass/fail gates for documentation compliance. Invoicing must be performed exclusively through the Tungsten Network in arrears on a monthly basis, and the contractor is prohibited from using FASC-prohibited unmanned aircraft systems, covered telecommunications equipment under Section 889, or engaging in racially discriminatory DEI practices. Compliance with sustainable product

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

IFB P2695016 Cannabis, Pesticide, and Witness Testimony Services

Solicitation # 0000039956

The State of California is seeking a qualified contractor to provide comprehensive cannabis, pesticide, and witness testimony services to support the Cannabis Enforcement Program through the Department of Fish and Wildlife. The contractor must perform quantitative analysis of tetrahydrocannabinol levels in confiscated cannabis plant samples and identify illicit pesticides used on these plants, many of which carry foreign labeling and constitute felony violations. Analysis must be conducted with scientific rigor to ensure admissibility in court, as these findings directly inform prosecutorial decisions and criminal charges. Beyond laboratory testing, the contractor is required to provide expert witness testimony to explain testing methodologies, validate results, and defend findings during legal proceedings, ensuring the integrity and credibility of evidence presented in court. The solicitation closes on August 21, 2026, at 3:00 PM Pacific Time, and all bids must be submitted in accordance with the official invitation for bid. Performance is expected to be centered in West Sacramento, with samples processed and testimony delivered as needed statewide. The contractor must be fully accredited and具备 the technical expertise to handle forensic-level cannabis and pesticide analysis under criminal investigation standards. Interested vendors are advised to review all documents in the official bid package and register on the state’s procurement portal if required. Questions regarding the bid's content or requirements must be directed to the designated state contact, as Biddingo.com provides only informational support and assumes no liability for the accuracy or completeness of third-party materials.

POSTED

DEADLINE

Technical Compliance & Product Certification Support

Nashville Electric Service

POSTED

DEADLINE

Shock Testing Certification for Equivalent Parts

Department of National Defence

POSTED

DEADLINE

CCTV Inspection and Cleaning of Sewer Lines

Inliner Solutions, LLC

POSTED

DEADLINE

HealthPRO RFP – Pharmacy Cleanroom Certification & Environmental Monitoring

Solicitation # HP-CLEANROOM-RFP

HealthPRO Procurement Services Inc. has issued a competitive request for proposal titled HealthPRO RFP – Pharmacy Cleanroom Certification & Environmental Monitoring with solicitation number HP-CLEANROOM-RFP, open for responses until September 15, 2026. The posting encompasses four distinct service categories: cleanroom certification and recertification including HEPA filter integrity testing, air changes per hour, temperature, humidity, and pressure differential monitoring; primary engineering control certification for biological safety cabinets, laminar airflow workbenches, and compounding aseptic containment isolators; environmental air and surface sampling and monitoring; and hazardous drug wipe sampling for surface contamination testing. All contract documentation and future amendments must be accessed through Euna, and bidders are advised that no additional updates will be provided elsewhere. The opportunity is managed by 3SHealth under the Saskatchewan Public Sector with Alysa Palazzo listed as the primary point of contact, and although posted on SaskTenders, participation by 3SHealth is not guaranteed and remains contingent upon existing contractual obligations at the time of potential selection.

POSTED

DEADLINE

Infrastructure - Invitation to Bid - Hazardous Building Materials Assessments & Hazardous Building Materials Management Plan Development – North Area Buildings

Solicitation # AB-2026-05519

BGIS has been engaged by Alberta Infrastructure to conduct hazardous building materials assessments and develop hazardous building materials management plans for buildings in the North Area. The work involves identifying, evaluating, and documenting the presence of hazardous materials such as asbestos, lead-based paint, radon, and other regulated substances across a portfolio of provincial facilities. The contractor is responsible for performing site inspections, collecting and analyzing samples, preparing detailed reports, and creating comprehensive management plans that outline mitigation strategies, removal protocols, and long-term monitoring procedures in compliance with provincial regulations and safety standards. The project requires coordination with facility stakeholders and adherence to strict health and safety protocols during all phases of assessment and planning. The solicitation for this contract was issued under reference number AB-2026-05519 and was posted on August 5, 2026, with a response deadline of August 19, 2026. Primary point of contact for inquiries is Jess Pylypow, Facility Manager, reachable via email. The scope of work applies exclusively to buildings located within the North Area of Alberta, and the contractor must demonstrate technical expertise in hazardous materials assessment, regulatory compliance, and project documentation. All deliverables must align with Alberta’s environmental and occupational health requirements, and the successful bidder will be expected to provide timely, accurate, and actionable data to support infrastructure decision-making and public safety.

Infrastructure

POSTED

1 day ago

DEADLINE

in 13 days

AI Contract Overview

The contract requires the performance of comprehensive testing on an amplifier to verify compliance with all specified technical and performance requirements, culminating in the issuance of a formal Certificate of Conformance. This certification must document that the amplifier meets or exceeds established standards and is fit for its intended operational use. The work is to be conducted under a subcontract arrangement, with the Government of Canada through the Department of National Defence as the contracting entity, and the place of performance is designated as Canada. The solicitation was posted on April 23, 2026, and responses are due by May 26, 2026, with the North American Industry Classification System code 541380 indicating that the work falls under Other Scientific and Technical Consulting Services. All testing procedures, documentation, and validation must align with applicable defense and technical specifications, ensuring full regulatory and operational compliance before certification is granted.