Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

COMPUTER SUBASSEMBL

Active
SPE8EN-26-T-2788Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract outlines the procurement of a computer subassembly under solicitation SPE8EN-26-T-2788, issued by the Defense Logistics Agency for the Department of Defense. The item, identified by NSN 7050-01-491-6931 and part number 1756-IB16, is to be supplied by ROCKWELL AUTOMATION INC in a quantity of four units, with a unit price of $4.00 and a total price of $16.00. Delivery must occur within 167 days, with FOB origin terms, inspection and acceptance points at the destination, and no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E, marking must follow MIL-STD-129 with no special codes, and shipping is directed to DLA Distribution San Diego at the specified address. The supplier must adhere to DLA packaging standards and ensure the complete absence of mercury or mercury-containing compounds in the hardware, except for permitted functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with additional containment requirements for portable fluorescent lamps and instruments. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with revisions controlled based on the acquisition type and solicitation timeline. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 is required, with the vendor responsible for completing a self-assessment. The item is classified under NAICS code 331318, and all units of issue align with DoD-authorized standards referenced by the official DLA document. The original required delivery date was October 9, 2026, with a need ship date of February 1, 2027, and the solicitation was posted August 5, 2026, with responses due by August 17, 2026. Covered defense information applies, and transportation details must follow DLAD Proc Notes C19 and C20. Point of contact for the contract is Jennifer Esworthy, reachable via email and phone provided.

General Info

ROCKWELL AUTOMATION INC to supply four NSN 7050-01-491-6931 subassemblies at $4 each, FOB origin, no mercury, CMMC Level 2 compliant, deliver by Feb 1, 2027.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQView Agency

NAICS

331318 - Other Aluminum Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8EN-26-T-2788 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ
View Agency Profile
Office AddressUS
Contacts
Jennifer Esworthy
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COMPUTER SUBASSEMBL
COMPUTER SUBASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ROCKWELL AUTOMATION INC (01121)
MILWAUKEE WI
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
ROCKWELL AUTOMATION, INC. 01121 P/N 1756-IB16 BAE SYSTEMS LAND & ARMAMENTS L.P. 44114 P/N F081948
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757426 0001 EA 4.000
NSN/MATERIAL:7050014916931
DELIVERY (IN DAYS):0167
SPE8EN-26-T-2788
SECTION B
PR: 7017757426 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:02/01/2027 Original Required Delivery Date:10/09/2026
SPE8EN-26-T-2788 NSN/Part Number: 7050-01-491-6931 Quantity: 4 EA Purchase Request: 7017757426QTY: 4 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331318
New
DIBBS
NOZZLE, FUEL AND OIL
Solicitation # SPE8EE-26-T-2270
The contract pertains to the procurement of a fuel and oil nozzle with part number HM020-917-11 and NSN 4930-01-583-8673, supplied by ROBERTSON FUEL SYSTEMS, L.L.C., under solicitation SPE8EE-26-T-2270. A total of 11 units are required to be delivered FOB origin with zero variance allowed in quantity, and the delivery window is set at 167 days from the contract award, with an original required delivery date of April 12, 2027. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, while also adhering strictly to MIL-STD-129 for marking and labeling, and RP001 for DLA-specific packaging requirements. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, and all technical and quality provisions referenced by R or I numbers are incorporated from the official DLA database. Sampling requirements mandate the use of MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and critical attributes are assigned verification level VII or an AQL of 0.1, with major and minor attributes at IV and II or AQLs of 1.0 and 4.0 respectively. The item is classified as a critical application item, and the contract includes specific guidance on unit of issue, palletization, and transportation procedures referencing DLAD Proc Notes C19 and C20. The delivery address is DLA Distribution’s New Cumberland Facility in Pennsylvania, and the solicitation is a total small business set-aside under NAICS code 331318 with a response deadline of August 17, 2026, and the point of contact for inquiries is Philip Ferrara of the Department of Defense.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE8E7-26-T-3469
The contract solicits ten tube axial fans under NSN 0001S00000061 for delivery within 193 days after award, with a purchase request number of 7017758323. The procurement is governed by the Defense Logistics Agency’s technical and quality requirements referenced from the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date depending on the acquisition size. The item is subject to strict export control under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons anywhere in the world, including foreign nationals employed by U.S. firms. Access to this data is restricted to contractors with an approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal authorization from DLA. Additional quality requirements include inspection and acceptance at origin, removal of government identification from non-accepted items, and adherence to DLA packaging standards. The contracting office is the DDSP New Cumberland Facility, with Kelly Mitchell listed as the primary point of contact, and the place of performance is New Cumberland, Pennsylvania. The solicitation is under the NAICS code 331318, and bidders must be certified at CMMC Level 2 as a third-party assessment organization to be eligible. The solicitation opened on August 5, 2026, with responses due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, EXTENSI
Solicitation # SPE7L1-26-T-916N
The contract calls for one helical extension spring with NSN 5360-01-141-9523 and purchase request number 7017744422, to be delivered in a single unit to the USS GEORGE WASHINGTON CVN 73 at FPO AP 96607, with delivery required within 20 days of award under FOB destination terms. The item must comply with all DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and marking standards per MIL-STD-129 with no special marking codes. The spring must be free from intentional addition of mercury or mercury-containing compounds, except for permitted uses such as functional components in batteries, lighting, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable devices containing mercury requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. All technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. The contract is issued under solicitation SPE7L1-26-T-916N with an original required delivery date of August 3, 2026, and includes transportation instructions per DLAD Proc Notes C19 and C20, with shipment coordinated via VSM and DD Form for government use.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
Federal
Supply of 4" x 4" x 1/4" 6061-T6 Aluminum Square TubeThe contract requires the supply of four units of 4-foot-long 4-inch by 4-inch by 1/4-inch wall thickness aluminum square tubing made from 6061-T6 alloy or an acceptable domestic equivalent. The material specification is critical, as 6061-T6 is a high-strength, heat-treatable aluminum known for its excellent corrosion resistance and weldability, commonly used in structural applications requiring durability and precision. The tubing must meet exact dimensional and material standards to ensure compatibility with the recipient’s operational needs. The acquisition is classified as a subcontract under NAICS code 331318, which pertains to aluminum extrusion, indicating the work involves specialized manufacturing processes. The solicitation was posted on August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time, leaving a limited window for submissions. The place of performance is designated as Oak Ridge, Tennessee, with a zip code of 37830, suggesting the material will be delivered directly to a Department of Energy facility operated by ORNL UT-Battelle LLC. As a DOE contractor, the organization is likely utilizing the tubing for research, development, or infrastructure projects where material integrity is paramount. No set-aside provisions are specified, meaning the contract is open to any qualified supplier regardless of business size or designation.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
Federal
Supply of 6" x 2" x 1/4" 6061 Aluminum Rectangle TubeThe contract calls for the supply of two units of 4-foot-long 6-inch by 2-inch by 1/4-inch 6061 aluminum rectangle tube or a domestic equivalent, ensuring material compatibility and performance standards. The specification mandates the use of 6061 aluminum, a widely recognized alloy valued for its strength, weldability, and corrosion resistance, making it suitable for structural and mechanical applications. Each tube is dimensioned precisely to meet engineering requirements, and the quantity is limited to two units, indicating a targeted procurement for specific project needs. The solicitation is classified as a subcontract under NAICS code 331318, which corresponds to aluminum ingot and alloy manufacturing, and is issued by Oak Ridge-based ORNL UT-Battelle LLC, a Department of Energy contractor. The place of performance is designated as Oak Ridge, Tennessee, with a 37830 ZIP code, suggesting the material will be delivered directly to a DOE-affiliated facility. The response deadline is set for August 11, 2026, at 8:00 PM Eastern Time, with the opportunity posted on August 4, 2026, providing a one-week window for submissions. No set-aside designation or specific point of contact is indicated, and the procurement is open to qualified suppliers able to meet the technical and delivery requirements without additional constraints.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
Federal
Supply of 6" x 4" x 1/2" 6061 Aluminum Rectangle TubeThe contract calls for the supply of four units of 24-foot-long aluminum rectangle tubing with dimensions of 6 inches by 4 inches by 1/2 inch, manufactured from 6061-T6 aluminum or a qualifying domestic equivalent. The material must meet specified mechanical and chemical properties associated with the 6061-T6 temper, ensuring suitability for structural or high-performance applications. The place of performance is designated as Oak Ridge, Tennessee, with a zip code of 37830, indicating delivery must be made to that location. The solicitation is classified as a subcontract under NAICS code 331318, which corresponds to aluminum tube and pipe manufacturing, suggesting the work falls under industrial fabrication and supply rather than direct government procurement. The posting date for this solicitation is August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time, leaving a one-week window for interested parties to submit proposals. The contracting organization is ORNL UT-Battelle LLC, a Department of Energy contractor, which implies the end use of the tubing may be tied to federal research, energy, or laboratory operations. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors without preference for small businesses or other categories. All submissions must comply with the material specifications and delivery requirements outlined in the solicitation, and failure to meet the deadline or quality standards will result in disqualification.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
Federal
Aluminum Tubes, Plates, and Pipping Needs
Solicitation # PR457594
ORNL is seeking quotations for a range of aluminum materials required for technical applications, all governed under the Brand Name or Equal provision to allow for domestic equivalents. The solicitation calls for specific dimensions and tempers of 6061 aluminum products including rectangular and square tubes such as a 6-inch by 4-inch by half-inch tube, a 6-inch by 2-inch by quarter-inch tube, and a 4-inch by 4-inch by quarter-inch square tube, along with various thicknesses of 6061-T6 and 6061-T651 aluminum plates ranging from one-eighth inch to one and one-half inches, including two distinct listings for the one-eighth inch sheet. Additionally, a 4-inch schedule 80 aluminum pipe with a 4.50-inch outer diameter and a 0.337-inch wall thickness is required. All items must meet the specified alloy and temper standards without exception. The solicitation, identified as PR457594, was posted on August 4, 2026, and responses are due by August 11, 2026, with performance to be delivered to Oak Ridge, Tennessee. The request is issued by ORNL Ut-Battelle LLC, a Department of Energy contractor, and inquiries should be directed to Maureen Nanstad at the provided email address.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M4-26-T-276C
The contract solicitation SPE7M4-26-T-276C seeks 965 helical compression springs identified by NSN 5360-00-371-0159, classified as a commercial item under the NAICS code 331318. Delivery is required to the Arizona Industries for the Blind in Phoenix, AZ 85043, with an FOB Destination term and a need ship date of January 30, 2029, and original delivery date of April 23, 2029. The contractor must comply with comprehensive packaging, preservation, and marking standards per MIL-STD-2073-1E and MIL-STD-129, including specific container types, preservation methods, and machine-readable bar coding. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via RP001 and RA001, and all items are subject to destination inspection and acceptance by the Government under FAR 52.246-1. Payment must be processed electronically via Wide Area WorkFlow, and invoice documentation must conform to approved types such as Invoice and Receiving Report or Invoice2in1. The solicitation mandates strict compliance with a broad suite of FAR and DFARS clauses, including cybersecurity safeguards under 252.204-7012, prohibition of hexavalent chromium, restrictions on covered defense telecommunications equipment, whistleblower protections, and requirements for safeguarding government personnel work product. Subcontracting is subject to a deviation allowing commercial subcontracting under 252.244-7999, and NIST SP 800-171 assessment requirements apply with a documented deviation. Offerors must certify their Small Business status and socioeconomic designations, disclose UEI and CAGE codes, and provide hazard communication data for any hazardous materials, including Safety Data Sheets compliant with OSHA regulations. All proposals must be submitted through the DIBBS portal by August 6, 2026, and award is expected to follow a Lowest Price Technically Acceptable approach based on mandatory compliance with technical, regulatory, and socioeconomic criteria, with no formal weighting of technical factors. No pricing data is provided in the solicitation, and the final contract type remains unspecified pending award.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 331318
New
DIBBS
CABLE, POWER, ELECTRI
Solicitation # SPE7M1-26-T-247K
The contract specifies the procurement of 500 feet of continuous electrical cable, identified by NSN 6145013810311 and part number 44A1121-18-0/9-9-US, with a strict requirement for a single unbroken length unless the advice code indicates otherwise; advice codes 2N, 28, or 34 mandate continuous length with no multiple unit packs, while 2P or 39 permit multiple unit packs. The cable must comply with all DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be labeled and marked per MIL-STD-129 with unit of issue and quantity per unit pack conforming to the contract. Packaging and palletization must adhere to RP001 DLA Packaging Requirements, and the item is classified as a critical application item. Delivery is FOB origin, with an acceptance and inspection point at destination, within 149 days from contract award, allowing a quantity variance of plus or minus 5 percent. The ship date is set for January 11, 2027, and the delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-247K, issued under a federal procurement with NAICS code 331318, and the primary point of contact is Alisha Blanton of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
MAGNET WIRE
Solicitation # SPE7M1-26-T-247J
The contract is for the procurement of magnet wire, identified by NSN 6145-00-937-8406 and part number MW016CHX000012NNC, with a requirement for three reels, each containing 75 pounds of continuous electrical wire. The wire must comply with NEMA MW1000 Revision NR dated January 1, 2025, and be packaged and preserved per MIL-DTL-12000 and MIL-STD-2073-1E, with marking in accordance with MIL-STD-129. No mercury or mercury-containing compounds may be intentionally added or come in direct contact with the product, except for functional uses in specified items like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable devices containing mercury must be shockproof and include a secondary containment. The unit of issue is a reel, and delivery must occur within 95 days from contract award, shipped FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, with preservation methods defined as ZZ and packaging code U. The delivery address is DLA Distribution San Joaquin in Tracy, California, and the contract references DLA Procurement Notes C19 and C20 for transportation requirements. The advice code determines whether continuous length is mandatory or if multiple unit packs are acceptable, with the advice code superseding any conflicting schedule data. Full and open competition applies, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or RFP issue date for larger ones, unless an amendment supersedes it. The contract was posted on August 3, 2026, with responses due by August 14, 2026, and is issued under a DoD procurement with a NAICS code of 331318.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-247D
The contract solicitation SPE7M1-26-T-247D seeks 480 feet of electrical wire, identified by NSN 6145-01-383-3897, with a permitted quantity variance of up to +10% no less than 0%, allowing delivery of up to 528 feet. The item must conform to the technical specification SAE AS81044B Revision B dated July 1, 2019, and be supplied in continuous lengths as dictated by the Advice Code 2G, which supersedes any conflicting schedule requirements. The wire shall be packaged in accordance with MIL-STD-2073-1E and preserved per MIL-DTL-12000, utilizing a dry storage condition and unspecified preservation and packaging materials indicated by "ZZ" codes, with a unit pack size of 500 feet and a packaging code of "U." Marking requirements are strictly aligned with MIL-STD-129, including standardized GS1-128 barcoding on both shipping containers and unit packages, with special marking code ZZ–ZZ indicating unspecified additional requirements. Delivery must be made FOB origin in 20 days to the Naval Sea Logistics Center at Keyport, Washington, using traceable freight methods—parcel post is prohibited. The government will inspect and accept the material at destination, enforcing compliance with Qualified Products List or Qualified Manufacturers List requirements. The contract value is estimated at $480 for the base quantity, with a maximum potential value of $528, and payment will be processed electronically through Wide Area WorkFlow (WAWF). The solicitation is a full and open competition under NAICS code 331318 and is issued by Defense Logistics Agency’s Maritime Supply Chain on behalf of the Department of Defense, with proposals due by August 14, 2026 via the DIBBS portal. Multiple FAR and DFARS clauses are incorporated, including those on combating trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity assessments per NIST SP 800-171, and transportation by sea. Offerors must provide valid UEI and CAGE codes and certify size status and socioeconomic categories such as small business, HUBZone, SDVOSB, WOSB, or EDWOSB where applicable, with joint venture participants required to disclose the UEI of each party
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-246S
The contract requires the supply of 2,000 feet of electrical wire in two continuous 500-foot spools, with the NSN part number 6145-01-384-4306, under solicitation SPE7M1-26-T-246S. The delivery schedule mandates fulfillment within 292 days after order placement, and all supplies must comply with DLA packaging requirements and technical/quality standards outlined in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. For simplified acquisitions, the applicable revision of the master list is determined by the solicitation issue or award date, while larger acquisitions adhere to the RFP issue date unless revised by an amendment. The contractor must ensure all non-accepted supplies have government identification removed prior to delivery. No data is currently available for the item, so the alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, under NAICS code 331318, managed by the Department of Defense’s Maritime Supply Chain through the DLA office, with performance required at New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Alisha Blanton, reachable via email and phone.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

Same awarding agency

NAICS: 334112
New
DIBBS
Display Unit Manufacturing and Supply
Computer Storage Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541690
New
DIBBS
Technical Compliance & Quality Assurance SupportThe contract titled Technical Compliance & Quality Assurance Support requires the provision of technical documentation, quality assurance, and validation services to ensure all units conform to the Department of Defense Logistics Agency’s R/I-numbered requirements and Naval Sea Systems Command standards. The work centers on rigorous adherence to technical specifications and performance benchmarks critical to defense equipment integrity, with a focus on documentation accuracy and compliance verification throughout the lifecycle of the units. Quality control processes must align with established military and naval protocols to guarantee operational readiness and regulatory compliance. Performance of the contract is designated for Tracy, California, with a zip code of 95304-5000, and it is classified as a subcontract under the NAICS code 541690 for other scientific and technical consulting services. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, indicating a short but critical window for potential vendors to submit proposals. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment T & IFO EQ office, and all deliverables must support DLA’s mission-critical logistics and equipment validation frameworks.
Other Scientific and Technical Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423490
New
DIBBS
Supply of Ready-to-Ship Display Units (Commercial Off-The-Shelf Resale)The contract requires the supply and delivery of seven fully compliant, off-the-shelf display units designed for resale, meeting all technical specifications, packaging, and marking requirements established by the Defense Logistics Agency. These units must be commercially available, ready to ship, and fully configured to satisfy DLA’s operational and logistical standards without customization. The procurement is classified under NAICS code 423490, indicating a focus on wholesale trade of other electronic parts and equipment, and is issued as a subcontract under the Department of Defense’s Construction & Equipment T & IFO EQ organization. All deliveries must be performed to the specified place of performance in Tracy, California, with a zip code of 95304-5000. Proposals are due by August 17, 2026, with the solicitation posted on August 5, 2026, providing a twelve-day window for submissions. There is no set-aside designation applied to this opportunity, and it is open to all eligible vendors. Compliance with DLA’s labeling, documentation, and delivery protocols is mandatory to ensure seamless integration into the military supply chain. The solicitation number SPE8EN26T2781 must be referenced in all correspondence and submissions.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334513
New
DIBBS
Precision Manufacturing of Display Unit (Mercury-Containing Instrument)The contract calls for the precision manufacturing of seven shockproof display units that contain mercury, with strict adherence to NAVSEA 5100-003D standards requiring secondary containment to ensure safety and compliance with hazardous material handling protocols. The production process may involve casting or forging operations and necessitates the use of special tooling, indicating a high level of technical complexity and precision engineering. These units are intended for specialized applications where durability and containment are critical, and all work must meet stringent defense-grade specifications. Performance of this subcontract is centered in Tracy, California, with a zip code of 95304-5000, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. The North American Industry Classification System code 334513 identifies the work as falling under instruments and related products manufacturing, and the contracting organization under the Department of Defense is listed as Construction & Equipment T & IFO EQ. The nature of the work and the handling of mercury imply that any selected vendor must have proven experience in producing hazardous material-containing instruments under military or federal guidelines.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423420
New
DIBBS
Supply of Magnetic Disk Set (NSN: 7045016564522)
Office Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334210
New
DIBBS
SHELL, TELEPHONE BASE
Solicitation # SPE8EN-26-T-2782
The contract specifies the procurement of 10 units of a SHELL, TELEPHONE BASE, VEHICLE CRADLE, identified by NSN 5805-01-554-4324 and part number VCD7000-P000R from SYMBOL TECHNOLOGIES INC. DBA 64928, at a unit price of $10.00 for a total contract value of $100.00. Delivery is required within 167 days after the award date, with FOB Origin terms applying, meaning the contractor assumes all transport costs and risks until the goods reach the designated destination at DDSP NEW CUMBERLAND FACILITY, 2083 NORMANDY DRIVE, NEW CUMBERLAND, PA 17070-5002. The item must be packaged per ASTM D3951, but must fully comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Palletization must adhere to RP001: DLA Packaging Requirements for Procurement, and all packages must be marked and labeled in accordance with MIL-STD-129, including proper Unit of Issue and Quantity per Unit Pack (QUP) alignment. Barcoding and logistics marking follow MIL-STD-129’s standardized formats. Inspection and acceptance occur at the destination by the Government, with no tolerance for quantity variance. The contractor must comply with cybersecurity requirements including CMMC Level 2 self-assessment and adherence to NIST SP 800-171 for safeguarding covered defense information. Hazardous materials, if any, require labeling per OSHA’s Hazard Communication Standard and submission of Safety Data Sheets, with any radioactive materials exceeding thresholds clearly identified under MIL-STD-129. The contract mandates adherence to the Buy American Act, applicable small business programs, and requirements for Unique Entity ID and CAGE code disclosures. Electronic invoicing is mandatory through Wide Area WorkFlow, and all subcontracting actions must follow the clauses for commercial products and services. Contractors are bound by strict representations regarding employment eligibility, anti-trafficking policies, and prohibitions on internal confidentiality agreements. The solicitation issued under SPE8EN-26-T-2782 on August 5, 2026, and closed for response on August 17, 2026, is administered by the Defense Logistics Agency under the Department
Telephone Apparatus Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334112
New
DIBBS
INTERFACE UNIT, AUTOMAT
Solicitation # SPE8EN-26-T-2837
The contract is for the procurement of two Interface Units, Automatic Data Processing, identified by NSN 7025-01-629-6527 and part number 781630-01 from National Instruments Corp, under solicitation SPE8EN-26-T-2837. Delivery is required within 167 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. The total contract value is $4.00, with a unit price of $2.00 per unit and no variance allowed in quantity. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must be packaged and labeled per MIL-STD-129 and RP001, including palletization standards. Mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional components like batteries, fluorescent lamps, or controlled instruments, which must include a second containment boundary as per NAVSEA 5100-003D. Packaging must adhere to DLA’s specified QUP and U/I, and goods must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. The contract also includes restrictions on government identification removal from non-accepted supplies and applies to covered defense information. The required ship date is February 1, 2027, with the original delivery deadline set for September 18, 2026.
Computer Storage Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
CAMERA-RECORDING, VIDEO
Solicitation # SPE8EN-26-T-2783
This contract pertains to the procurement of camera-recording video equipment under solicitation SPE8EN-26-T-2783, issued by the Department of Defense through the Defense Logistics Agency. The item is identified as a commercial item with the NSN 5836016474212 and part number 960-000971 supplied by Logitech Inc. The contract specifies a quantity of 531 units to be delivered FOB origin within 167 days, with inspection and acceptance occurring at the destination location. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The delivery destination is DLA Distribution Cherry Point in North Carolina, and transportation is governed by DLA procedural notes C19 and C20. The required delivery date is November 21, 2026, with a need ship date of February 1, 2027, and no quantity variance is permitted. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with exceptions limited to functional uses in batteries, fluorescent lights, certain instruments, weapon systems, and chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as specified in NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are to be sourced from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation or award date depending on acquisition type. The item is further subject to Covered Defense Information provisions and the specified unit of issue is each (EA), priced at $531.00 per unit, totaling $280,961.00. All documentation and compliance with these contractual stipulations are mandatory for contract performance.
Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
CASE, PHOTOGRAPHIC E
Solicitation # SPE8EN-26-T-2849
The contract is for the procurement of 20 units of a photographic equipment case, identified by NSN 6760-01-491-2090 and vendor part number P/N 1450 from Pelican Products Inc. The item must be delivered within 20 days from the order date, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply strictly with ASTM D3951 while adhering to all higher-priority DLA Master List of Technical and Quality Requirements, including MIL-STD-129 labeling and RP001 palletization standards. The equipment does not involve ozone-depleting substances and must be shipped using the fastest traceable means, explicitly excluding parcel post. Shipping instructions designate a specific military freight address in Portsmouth, NH, with a RDD code of 777 and project identifier TP 2. The contract includes mandatory adherence to DLA’s technical and quality requirements referenced by R and I numbers, accessible via the official DLA website, and requires removal of government identification from non-accepted materials. The solicitation number is SPE8EN-26-T-2849, with a response deadline of August 17, 2026, and the issuing agency is the Department of Defense’s Construction & Equipment T & IFO EQ office, with Jennifer Esworthy listed as the primary point of contact.
Ball and Roller Bearing Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334112
New
DIBBS
DISK DRIVE UNIT
Solicitation # SPE8EN-26-T-2843
This contract specifies the procurement of 15 disk drive units under solicitation SPE8EN-26-T-2843, a total small business set-aside with NAICS code 334112, managed by the Department of Defense. The items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling, with special ESD-sensitive handling requirements designated by marking code 39. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lights, sensors, or naval equipment, and any exempted mercury-containing devices must be shockproof with secondary containment per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with all units delivered FOB origin, inspected and accepted at destination, and shipped without variance in quantity. The required delivery date is November 30, 2026, with a contract-allowed delivery window of 167 days, and shipments must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates compliance with DLA transport procedures C19 and C20 and requires suppliers to meet specific unit of issue guidelines. Approved vendors include Management Services Group, ATP Electronics, Smart Embedded Computing, and Arrow Electronics, each with designated part numbers. The point of contact for this solicitation is Jennifer Esworthy, and responses were due by August 17, 2026.
Computer Storage Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE8EN-26-T-2791
The contract pertains to the procurement of three keyboard, data entry units with NSN 7025-01-607-1165 under solicitation SPE8EN-26-T-2791, issued by the Department of Defense through the Defense Logistics Agency. Delivery is required FOB origin within 167 days of award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E using specific methods including preservative treatment, packaging material code 00, and containment defined as D3 unit and intermediate containers, with marking mandated under MIL-STD-129 and no special markings required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same location serving as the freight shipping address. A required ship date of February 1, 2027 is specified, with an original required delivery date of April 19, 2027. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific approved uses such as batteries, fluorescent lamps, sensors, or chemical reagents, with portable devices containing mercury requiring shock-proof design and a secondary containment barrier as per NAVSEA 5100-003D. Covered defense information requirements apply to specific part numbers, and all technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition size. The unit of issue is EA, with a unit price of $3.00, totaling $9.00, and all compliance must align with DoD procurement protocols including ANSI X12 unit conversions and transportation guidelines referenced in DLAD procedural notes C19 and C20.
Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334118
New
DIBBS
DISPLAY UNIT
Solicitation # SPE8EN-26-T-2793
The contract is for a restricted-source display unit identified by NSN 7025-01-611-1943, with a quantity of two units required under purchase request 7017757158. The item must be manufactured to the original equipment manufacturer’s drawing specifications and can only be supplied by prequalified sources listed in the solicitation; offers based on parts from other manufacturers must include comprehensive technical data for evaluation per DLAI 3200.1. Compliance with all DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Configuration changes, deviation requests, and removal of government identification from non-accepted supplies are governed by specified procedures. Delivery is due within 167 days after award, with performance located in Tracy, California, 95304-5000. The solicitation, numbered SPE8EN-26-T-2793, was posted on August 5, 2026, and responses are due by August 17, 2026, under NAICS code 334118. Primary point of contact is Jennifer Esworthy, reachable via email and phone provided.
Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details