Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Concrete and Decking (Roofing)

Active

Federal

Response Deadline11/16/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity involves the supply and installation of a concrete and steel deck roof system designed for debris protection at the USAF Arnold Engineering Development Complex. The project requires the contractor to adhere strictly to American Concrete Institute standards to ensure the integrity of the test area. The scope of work encompasses the full delivery and installation of the roofing system for prime contractors operating within the facility. The project is managed by the Department of Defense through the FA9101 AEDC PkP Procurement Branch, with performance taking place at Wright Patterson AFB. Interested parties must respond by November 16, 2026, under NAICS code 238110. This effort is focused on providing critical infrastructure protection to support specialized testing operations.

General Info

Agency

Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

NAICS

238110 - Poured Concrete Foundation and Structure Contractors

Place of Performance

Wright Patterson AFB, OH, USA

Set-Aside

NONE

Documents

This scope was carved out of FA9101269TS2.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RWP - Test Site 2 (TS2) Improvements & Modernization, Aerospace Vehicle Survivability Facility (AVSF)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 17

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 08:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and installs a roof system for debris protection for prime contractors on USAF Arnold Engineering Development Complex projects. Installs a concrete/steel deck roof in accordance with ACI (American Concrete Institute) standards to provide debris protection for the test area. Delivers the installed concrete/steel deck roof.

Similar Contracts

Same NAICS industry code

South Concourse Evolution (SCE) Bid Package 2.1

Solicitation # Bid Package 2.1

The South Concourse Evolution (SCE) Bid Package 2.1 is a solicitation for Subsystem 2.1.01, focusing on new building concrete for the Seattle-Tacoma International Airport in Washington. Managed by the Port of Seattle with Hensel Phelps serving as the General Contractor and Construction Manager, the project has an estimated budget range between 8 million and 10 million dollars. This opportunity is designated as an 8A set-aside for Small Disadvantaged Businesses under NAICS code 238110. Qualified firms must submit bids by 2:00 PM PDT on October 21, 2026, via email to the Port of Seattle. Requirements for submission include the use of specific bid forms provided in the Instructions to Bidders and the inclusion of a bid bond. The successful bidder will be required to provide 100 percent payment and performance bonds for all subcontracts exceeding 100,000 dollars and must execute agreements using Hensel Phelps standard subcontract forms. Additionally, the project is governed by a Project Labor Agreement, requires a Workers Compensation Waiver of Subrogation from all subcontractors, and is conducted in accordance with RCW 39.10.380 and RCW 39.10.390(2).

POSTED

about 7 hours ago

DEADLINE

Front Entrance Sidewalk and Curbing InstallationThis subcontract for the Front Entrance Sidewalk and Curbing Installation involves the demolition and installation of concrete infrastructure for prime contractors working on Groton Public Schools projects in Connecticut. The scope of work specifically requires the installation of 42 linear feet of curbing and 2,300 square feet of the specialized SILVERLINK paving system. To ensure all work meets applicable standards, the project requires VeriRated certification by Contact. The final deliverable consists of the completed repaired sidewalk and newly installed curbing. This opportunity is managed through DAS Procurement in Connecticut, with a response deadline set for November 2, 2026.

DAS Procurement

POSTED

about 12 hours ago

DEADLINE

Groton Public Schools

Solicitation # 1547

The Groton Public Schools, under the DAS Procurement agency for the state of Connecticut, has issued solicitation number 1547 for concrete sidewalk repair and replacement services. This project focuses on front entrance sidewalk repairs and requires the installation of 2,300 square feet of Silverlink and 42 linear feet of curbing. All work must be VeriRated by Contact to ensure compliance with applicable standards. The solicitation was posted on October 17, 2026, with a response deadline of November 2, 2026, at 3:00 PM. Interested parties can access further details through the CTSource Bid Board. The primary point of contact for this effort is Ernest Koschmieder. While specific pricing and contract values are not provided in the solicitation data, the scope of work is clearly defined by the material quantities required for the performance in Connecticut.

DAS Procurement

POSTED

about 12 hours ago

DEADLINE

Concrete & Stone PavingThis subcontract opportunity is for the installation of concrete and stone paving on projects managed by the City of San Antonio Capital Delivery Department. The selected contractor will work under prime contractors to perform pour-in-place concrete forming, placing, and finishing, as well as the installation of stone paving and the construction of integrated seat walls to deliver completed pedestrian surfaces. The solicitation is categorized under NAICS code 238110 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of December 1, 2026. Further details regarding this procurement can be accessed through the Texas SmartBuy portal.

CITY OF SAN ANTONIO

POSTED

DEADLINE

in about 1 month

Monument and Monument Box ConstructionThis subcontract opportunity with the City of Camden involves the construction and delivery of monuments and monument boxes for various facility projects. The selected contractor will work under prime contractors to install boundary or reference markers utilizing concrete forms and specific monument materials as outlined in Section 157. Interested parties must possess a valid New Jersey Business Registration Certificate to be eligible. The solicitation was posted on October 16, 2026, and requires a response by October 27, 2026, at 3:00 PM. This project falls under NAICS code 238110.

POSTED

DEADLINE

Concrete Equipment Pads and Bollard InstallationThis subcontract agreement involves the supply and installation of concrete equipment pads and protective steel bollards for prime contractors working on Alameda Municipal Power utility projects. The scope of work includes the forming and pouring of concrete and the secure installation of bollards to safeguard utility assets, all of which must be completed in strict accordance with the AMP Materials and Installation Criteria for Underground Systems. Managed by the Engineering and Operations agency in California under NAICS code 238110, the contract requires the delivery of fully cured concrete pads and properly installed protective barriers. The solicitation was posted on October 16, 2026, with a response deadline set for October 30, 2026.

Engineering and Operations

POSTED

DEADLINE

Concrete Forming and PlacementThis subcontract for Concrete Forming and Placement involves performing concrete work for prime contractors on Florida Department of Agriculture and Consumer Services facility projects. The scope of work focuses on the delivery of completed concrete foundations and structural slabs for a 31,000 square foot lab expansion and a 5,000 square foot maintenance shop. The project requires the assignment of a field superintendent who possesses at least two years of supervisory experience on similar concrete projects. Interested parties should note that the response deadline is November 19, 2026, and the work falls under NAICS code 238110.

Department of Agriculture and Consumer Services

POSTED

DEADLINE

in about 1 month

Metal Flange Installation and Concrete RepairThis subcontract with Triple A S.A. E.S.P. involves the installation of metal flanges and concrete restoration for civil works projects related to the Calle 76 Collector discharge in Barranquilla. The scope of work requires the contractor to install metal flanges on existing concrete structures and perform necessary patching to ensure a proper seal and fit, delivering fully repaired concrete interfaces. All activities must be executed in strict accordance with the project's technical specifications and the MC-ST-DC-10 Safety Manual. Interested parties must submit their responses by October 26, 2026, under NAICS code 238110.

Triple A S.A. E.S.P.

POSTED

DEADLINE

Concrete and Structural Elevation ContractorThe Washington Parish Government is seeking a Concrete and Structural Elevation subcontractor to construct elevated platforms for prime contractors working on Office of Homeland Security and Emergency Preparedness projects. The selected contractor will be responsible for the design and pouring of concrete pads and the installation of generators on new or existing pedestals. A primary objective of the work is to ensure all equipment is elevated above the 0.2 percent annual chance flood hazard in strict compliance with FEMA requirements. The contractor must provide detailed design drawings that demonstrate the necessary elevation heights to ensure all deliverables are flood-compliant. This subcontract opportunity falls under NAICS code 238110. Interested parties must submit their responses by the deadline of October 29, 2026, at 3:00 PM.

Washington Parish Government

POSTED

DEADLINE

Concrete Flatwork and SidewalksThis subcontract agreement involves the installation of four-inch concrete sidewalks and associated flatwork for ballfield projects managed by the Glynn County Board of Commissioners in Georgia. The scope of work requires the contractor to handle all forming, pouring, and finishing of the concrete in strict accordance with established construction plan standards, utilizing all necessary formwork and finishing tools to deliver the completed infrastructure. The opportunity was posted on October 16, 2026, with a response deadline of November 12, 2026. Classified under NAICS code 238110, this project is structured as a subcontract where the selected provider will work under prime contractors to fulfill the specific concrete requirements of the county's athletic facility improvements.

Glynn County Board of Commissioners

POSTED

DEADLINE

Concrete Landing ConstructionThis subcontract for Concrete Landing Construction involves performing formwork and pouring concrete for prime contractors on Town of Brookfield projects located at Brookfield High School. The scope of work specifically requires the construction of concrete landings to connect a replacement main staircase to the existing middle sidewalk, with a focus on ensuring smooth transitions at all connecting surfaces. All work must be completed using ready-mix concrete and professional finishing tools in strict compliance with applicable building codes. Managed by DAS Procurement for the state of Connecticut, this opportunity falls under NAICS code 238110. The solicitation was posted on October 16, 2026, and requires a response by the deadline of November 12, 2026. The final deliverable for the contract is the completion and delivery of the finished concrete landings.

DAS Procurement

POSTED

DEADLINE

Roof Truss and Lintel ReinforcementThis subcontract agreement involves providing structural roof reinforcement for prime contractors working on facility projects for the Niagara Region. The scope of work specifically focuses on the installation of truss reinforcement and new lintels designed to support the loads of new HVAC equipment. To ensure structural integrity and compliance, the contractor must provide shop drawings that are signed and sealed by a professional engineer registered within the local jurisdiction. The project is categorized under NAICS code 238110 and requires the delivery of a reinforced roof structure that strictly adheres to all engineering specifications. Interested parties should note that the response deadline for this opportunity is November 13, 2026.

POSTED

DEADLINE

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

Specialized Engineering and Design ServicesThis subcontract for Specialized Engineering and Design Services supports prime contractors on USAF Arnold Engineering Development Complex projects at Wright Patterson AFB. The scope of work focuses on the TS2 modernization, requiring the creation of detailed design plans, design specifications, and structural calculations capable of supporting 100k lb loads. All work must comply with AISC and ACI standards, and the performing entity must hold Professional Engineer licensure. Deliverables include certified as-built drawings provided in both native CAD and PDF formats, along with comprehensive O&M manuals. This opportunity falls under NAICS code 541330 and is managed by the Department of Defense through the AEDC Procurement Branch. The response deadline for this requirement is November 16, 2026.

Engineering Services

POSTED

about 11 hours ago

DEADLINE

Fuel Containment and Recovery SystemsThis subcontract involves the supply and installation of aviation fuel containment and transfer equipment for prime contractors supporting the Department of Defense at the USAF Arnold Engineering Development Complex. The scope of work requires the installation of a 1,000-gallon steel fuel catch pan, a 6,000-gallon recovery tank, and a portable pump system capable of a minimum transfer rate of 180 GPM. All deliverables must be fully compliant with EPA and environmental regulations to ensure a functional fuel containment and recovery system. The project is managed by the FA9101 AEDC PKP Procurement Branch and will be performed at Wright Patterson AFB. Interested parties must respond by November 16, 2026, under NAICS code 238220.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 11 hours ago

DEADLINE

Industrial Crane Systems (Bridge & Monorail)This subcontract involves the supply and installation of certified industrial crane systems for prime contractors supporting the Department of Defense at the USAF Arnold Engineering Development Complex, located at Wright Patterson AFB. The scope of work specifically requires the integration of a 25-ton bridge crane and a 5-ton monorail system, ensuring that all installations are functionally verified and fully operational. To meet project requirements, all systems must achieve full certification according to OSHA, ASME, and CMAA standards. Interested parties should note that the response deadline for this opportunity is November 16, 2026, with the project falling under NAICS code 333911.

Pump and Pumping Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Structural Steel Fabrication and ErectionThis subcontract involves the fabrication and installation of a freestanding steel test superstructure for prime contractors supporting the USAF Arnold Engineering Development Complex at Wright-Patterson AFB. The project requires the construction of a steel frame that adheres to AISC and ACI structural fire protection designs, featuring a ground-level test area and an elevated platform. This platform must be capable of supporting a 100,000 lb blanket load and must include integrated wide stairs and removable grating. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the contract falls under NAICS code 238120. The scope of work concludes with the final delivery of the fully installed superstructure and platform at the designated performance location. Interested parties should note the response deadline of November 16, 2026.

Structural Steel and Precast Concrete Contractors

POSTED

about 11 hours ago

DEADLINE

RWP - Test Site 2 (TS2) Improvements & Modernization, Aerospace Vehicle Survivability Facility (AVSF)

Solicitation # FA9101269TS2

The Arnold Engineering Development Complex (AEDC) is soliciting whitepapers under 10 U.S.C. § 4022 Other Transaction Authority (OTA) to modernize Test Site 2 (TS2) at the Aerospace Vehicle Survivability Facility (AVSF) located at Wright-Patterson Air Force Base, Ohio. The primary objective is to establish a state-of-the-art facility for Live Fire Test and Evaluation (LFT&E) of aerospace systems against advanced kinetic threats. The scope of work requires the performer to design, fabricate, deliver, install, and functionally verify a comprehensive system, including a freestanding steel superstructure meeting AISC and ACI fire protection standards, a 25-ton bridge crane, a 5-ton monorail system, and a 1,000-gallon fuel catch pan with a portable pump capable of a 180 GPM flow rate. The government will evaluate submissions based on three equally weighted criteria: technical capability and approach, schedule and risk management, and cost and price realism. Successful prototypes must demonstrate that the elevated platform can support a 100,000 lb blanket load and achieve full OSHA, ASME, and CMAA certifications for crane systems. Eligible participants must be small businesses or nontraditional defense contractors, with at least one nontraditional defense contractor or nonprofit research institution participating significantly. Responses must be submitted as a PDF whitepaper limited to 15 pages, excluding the required Rough Order of Magnitude (ROM) cost estimate and detailed execution schedule. The selection process involves an initial compliance screening followed by a detailed technical evaluation, which may lead to a Request for Prototype Proposal or direct negotiations for an Other Transaction Agreement.

Commercial and Institutional Building Construction

POSTED

about 11 hours ago

DEADLINE

Request for Whitepapers: AEDC Velocity Alliance - A Multi-Billion Dollar OTA Consortium Opportunity

Solicitation # FA9101-26-9-Velocity_Alliance

The AEDC Velocity Alliance is a strategic multi-billion dollar consortium established by the Department of the Air Force, through the Air Force Test Center and Arnold Engineering Development Complex, to accelerate the modernization, restoration, and sustainment of critical national test infrastructure. Operating under the authority of 10 U.S.C. 4022 and 10 U.S.C. 2808a, this initiative utilizes Other Transaction Agreements (OTAs) rather than standard FAR-based contracts to provide an agile procurement vehicle for complex engineering and construction projects through Fiscal Year 2032. The scope of work covers 15 technical categories, including high-pressure process systems, high-voltage electrical infrastructure, heavy industrial construction, and advanced mechanical engineering services. Membership in the Alliance is granted through a phased onboarding process requiring the submission of a ten-page whitepaper. To be eligible, applicants must demonstrate partnership capabilities by collaborating with Non-Traditional Defense Contractors, Small Businesses, or Nonprofit Research Institutions. Mandatory requirements for membership include Joint Certification Program compliance and verified cybersecurity standards, specifically CMMC Level 2 certification or a validated NIST SP 800-171 assessment in the Supplier Performance Risk System. Once established, all project opportunities will be competed exclusively among Alliance members, with the majority of awards anticipated to be based on Best Value considerations.

Engineering Services

POSTED

DEADLINE

in almost 4 years

Request for Whitepaper - AEDC Facility Digital Twins and Predictive Analytics

Solicitation # FA910126RWP-DigitalTwins

The Department of the Air Force is seeking innovative solutions through a Request for Whitepapers to establish an Other Transaction Agreement under 10 U.S.C. section 4022 for the Arnold Engineering Development Complex (AEDC) Facility Digital Twins and Predictive Analytics project. This multi-year initiative aims to modernize facility documentation by creating high-fidelity, engineering-grade 3D digital twins of critical infrastructure. The initial phase, scheduled for Fiscal Year 2027, focuses on the Von Karman Gas Dynamics Facility (VKF), with plans to eventually scale the methodology across more than 2.5 million square feet of facility footprint. Technical requirements specify a minimum Level of Detail (LOD) of 350/400 and a dimensional accuracy of +/- 1/4 inch, utilizing Autodesk Revit for architectural and structural models and Autodesk Plant 3D for intelligent process models. As an Other Transaction Agreement, this effort is not subject to the Federal Acquisition Regulation, though it requires compliance with 31 U.S.C. section 1352 and DPAS regulations. All work must be performed within the continental United States, and performers must adhere to strict cybersecurity standards, including NIST SP 800-171 and CMMC Level 2 self-standards, as all project data is handled as Controlled Unclassified Information. Submissions are evaluated based on technical merit, program management, scalability, and cost realism. The pricing structure consists of a firm-fixed-price base phase with milestone-based payments and separate priced or rough order of magnitude option phases. Interested parties must maintain active SAM registration and a valid Joint Certification Program certification to access export-controlled data.

Engineering Services

POSTED

DEADLINE

PC 104 Single Board Computer

Solicitation # FA9101_PC104_SingleBoardComputer

The Department of Defense, through the FA9101 Aedc Pkp Procurement Branch, is soliciting quotes for the procurement of two PC 104 Single Board Computers and associated hardware to support the 746th Test Squadron. Specifically, the requirement includes two ENETX-MA4-2F4 Converter Appliances and four corresponding interface cable assemblies for power, MIL-STD-1553, and ARINC-429 communications. These components are critical for the integration, maintenance, and troubleshooting of the Ultra High Accuracy Reference System and customer Units Under Test. The hardware must be genuine OEM Alta dt parts and comply with VITA 47 and MIL-STD-810 standards, requiring 5-32 VDC conditioned power. This is a firm-fixed-price contract set aside for small businesses and women-owned small businesses, with a specific price evaluation preference for HUBZone small business concerns. Award will be granted to a responsible source that is technically acceptable and provides a fair and reasonable price. Deliveries are specified as FOB Destination to Holloman AFB, New Mexico, with a required delivery schedule of 10 weeks from the date of award receipt. Contractors must utilize the Wide Area WorkFlow system for electronic invoicing and adhere to MIL-STD-129 and MIL-STD-130 for packaging, marking, and unique item identification. Quotes must be submitted electronically by October 28, 2026, and must be divided into administrative/price and technical capability sections.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Mazak Repair 655

Solicitation # FA9101MR655

Solicitation FA910127QB001 is a firm-fixed-price requirement issued by the Department of the Air Force for the repair of a Mazak MTV 655/80N Vertical Machining Center located at Holloman Air Force Base, New Mexico. The scope of work requires the contractor to provide all personnel, equipment, and genuine OEM parts to replace the 6K RPM spindle cartridge and rebuild the gearbox to original equipment manufacturer specifications. Following the repairs, the contractor must perform full system calibration of home positions and tool measurement systems, followed by operational testing to demonstrate full functionality for government acceptance. This is a restricted competition sole-source procurement intended for Magnum Precision Machines, the authorized regional distributor and certified service provider for Mazak Corporation. The contract requires a minimum one-year warranty on all parts and labor, with a total performance period of 90 calendar days after receipt of order. Award will be based on technical acceptability and fair and reasonable pricing, with a 10 percent price evaluation preference applied to HUBZone small business concerns. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

High-Voltage Electrical Infrastructure UpgradesThis subcontract for High-Voltage Electrical Infrastructure Upgrades supports Air Force AEDC facility projects by upgrading high-voltage substations exceeding 6.9kV and installing medium-voltage distribution networks. The scope of work involves the installation of high-voltage transformers, switchgear, and medium-voltage cabling specifically designed to power large industrial motors. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project requires strict adherence to high-voltage safety standards and NETA certifications to ensure the delivery of fully operational infrastructure. The contract falls under NAICS code 238210 and has a response deadline of September 30, 2030.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 2 months ago

DEADLINE

in almost 4 years

Low-Pressure Process Piping InstallationThis subcontract involves the design, fabrication, and installation of low-pressure process piping systems, specifically those rated at or below 150 PSIG, for prime contractors working on Air Force AEDC facility projects. The scope of work includes the installation of piping for various gas and fluid media, with all testing and turnover procedures conducted in accordance with ASME B31.3 industry standards. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the contract falls under NAICS code 238220. The project requires the delivery of fully installed and tested low-pressure piping systems, with a response deadline set for September 30, 2030.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 2 months ago

DEADLINE

in almost 4 years

High-Pressure & Hazardous Process Piping InstallationThis subcontract with the Department of Defense, specifically the Air Force AEDC facility, involves the design, fabrication, and installation of complex high-pressure and hazardous process piping systems. The scope of work focuses on systems exceeding 150 PSIG and requires strict adherence to ASME B31.3 standards, encompassing all testing and turnover processes. The project demands specialized welding certifications for high-pressure systems and the implementation of hazardous material containment. Under NAICS code 238220, the contractor is responsible for delivering fully installed and certified piping systems for prime contractors. The response deadline for this opportunity is September 30, 2030.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 2 months ago

DEADLINE

in almost 4 years

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS