Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Low-Pressure Process Piping Installation

Active

Federal

Response Deadline09/30/2030, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the design, fabrication, and installation of low-pressure process piping systems, specifically those rated at or below 150 PSIG, for prime contractors working on Air Force AEDC facility projects. The scope of work includes the installation of piping for various gas and fluid media, with all testing and turnover procedures conducted in accordance with ASME B31.3 industry standards. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the contract falls under NAICS code 238220. The project requires the delivery of fully installed and tested low-pressure piping systems, with a response deadline set for September 30, 2030.

General Info

Subcontract for low-pressure process piping installation at Air Force AEDC facilities by 2030.

Agency

Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

TN

Set-Aside

NONE

Documents

This scope was carved out of FA9101-26-9-Velocity_Alliance.

The full solicitation package (45 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Request for Whitepapers: AEDC Velocity Alliance - A Multi-Billion Dollar OTA Consortium Opportunity

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 31

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2030, 10:00:00 PM UTCin almost 4 years

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Designs, fabricates, and installs low-pressure (≤ 150 PSIG) process piping systems for prime contractors on Air Force AEDC facility projects. Performs fabrication and installation of piping for various fluid and gas media, including testing and turnover per ASME B31.3 industry standards. Delivers installed and tested low-pressure piping systems.

Similar Contracts

Same NAICS industry code

Police Aviation Unit Fire Suppression System

Solicitation # RFB-10000560

Baltimore County is soliciting bids under RFB-10000560 for a complete fire suppression system upgrade at the Police Aviation Unit hangar located at Martin State Airport. The scope of work requires the contractor to remove and dispose of existing Ansible 3% AFFF foam according to all local, state, and federal guidelines, providing manifest reports for the disposal. The contractor must replace the foam tank and bladder with new, properly sized components based on their own sizing calculations and fill the system with non-fluorinated, environmentally safe foam concentrate. Additionally, the project involves disconnecting and capping the water supply to two existing hose stations and removing the associated hose reels. The contract will be awarded to the lowest responsive and responsible bidder, with a final submission deadline of November 6, 2026. Bidders must submit all offers electronically via the OpenGov procurement portal and include an executed Procurement Affidavit and Taxpayer Identification Number certification. The project is subject to Maryland prevailing wage laws and local hiring requirements, and the county encourages participation from Minority and Women Business Enterprises to meet a 30 percent discretionary spending goal. All materials must be delivered F.O.B. Destination/Inside Delivery using recyclable packaging, and the contractor is responsible for obtaining all necessary permits.

Property Management

POSTED

about 3 hours ago

DEADLINE

Install Pier D High Pressure Air System, NSBREM-724-A

Solicitation # N4425527RB003

Solicitation N4425527RB003 is a design-build project for the installation of a permanent high pressure air (HPA) system at Pier D, B724A of Naval Base Kitsap in Bremerton, Washington. The scope of work includes the design, construction, and commissioning of the system, specifically incorporating the existing HPA cross connection into a system supplied by compressors on the south end of Pier D. The project requires the installation of HPA shore risers at five specific locations: East bollards 11, 59, and 101, and West bollards 47 and 59. All new piping must be installed under service grates with valves located topside. The project must adhere to stringent Unified Facilities Criteria (UFC), ASME, and Navy design codes, with the most stringent requirement governing in the event of discrepancies. This is a 100% set-aside for 8(a) businesses located within SBA Region X, with an estimated construction magnitude between 1 million and 5 million dollars. The contract is a firm-fixed-price task order under an 8(a) Multiple Award Construction Contract (MACC), with a period of performance of 538 calendar days from award. Award will be based on price and MACC past performance. Key requirements include compliance with EM 385-1-1 safety standards, strict base access and security protocols via the BAVR system, and the provision of a bid guarantee of 20% of the bid price or 3 million dollars, whichever is less. Proposals must be submitted through the PIEE portal by December 1, 2026.

Bristol Alliance of Companies

POSTED

about 3 hours ago

DEADLINE

Water Pump Replacement

Solicitation # water-pump-replacement

The Cassadaga Job Corps Center in New York is soliciting bids for a water pump replacement project at their Pump House. The scope of work involves removing existing end suction centrifugal pumps and check valves to install a new booster pump system featuring two pumps with variable speed drives and automatic tower fill valves. The project also requires the installation of a hydro pneumatic expansion tank, 3 inch Type L copper piping with sweat fittings, and fiberglass insulation on all piping, concluding with final testing and factory startup. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 30, 2026. The project falls under NAICS code 238220 and is managed by primary point of contact Derrick Dickerson.

Cassadaga Job Corps Center

POSTED

about 3 hours ago

DEADLINE

CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services

Solicitation # CBP#9772

Management & Training Corporation (MTC) is soliciting bids for solicitation CBP#9772, a fixed-price, single lump sum subcontracting opportunity to provide HVAC Air Handling Unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. The scope of work involves the thorough cleaning of twelve AHUs and twenty-eight coils across the Kilmer and Edison dormitories, including the cleaning of associated supply, return, and outside-air ductwork and air distribution components. The contractor is responsible for conducting pre-cleaning inspections, documenting existing conditions with photographs, and installing durable, gasketed permanent access panels to facilitate maintenance. The estimated contract value ranges from $100,000 to $250,000, with a performance period of 90 consecutive business days following a written Notice to Proceed. Bids are due by November 17, 2026, and will be awarded based on overall best value. Mandatory requirements for consideration include a physical site visit, a completed pricing schedule, and a bid bond guarantee of 20% for bids equal to or greater than $25,000. Performance and payment bonds from a surety company with at least an A- rating are also required for contracts exceeding $25,000. The opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Awardees must comply with Davis-Bacon prevailing wage determinations for Middlesex County, FAR regulations regarding small business utilization and federal funding transparency, and strict government guidelines for protecting sensitive information. Final acceptance is contingent upon a Center inspection and the submission of a comprehensive final project report.

Edison Job Corps

POSTED

about 3 hours ago

DEADLINE

CBP7787 ED1 RM 123 HVAC Compressor Replacement

Solicitation # CBP7787 ED1 RM 123

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a failed HVAC/refrigeration compressor at the Sierra Nevada Job Corps Center in Reno, Nevada. The project, identified as CBP7787 ED1 RM 123, has an estimated price range between 0 and 25,000 dollars. The scope of work is divided into four phases: preparation and environmental safety, including refrigerant recovery per EPA Section 608 regulations; demolition and removal of the failed unit; installation of an OEM-specified compressor and associated components; and system testing and commissioning. Bids will be evaluated based on overall best value, and a physical site visit is mandatory prior to submission. The opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Contractors must provide a detailed cost breakout and comply with Construction Wage Rate Requirements and FAR 52.222-4 for contracts exceeding 2,000 dollars. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid is required, along with performance and payment bonds from an A- rated surety company. Required documentation includes a Unique Entity ID, SF 1413 form, and proof of general liability insurance of at least 1,000,000 dollars and worker's compensation insurance with employer's liability limits of 500,000 dollars. Final payment is subject to a 10 percent retainage, released upon successful final inspection and approval of closeout documents.

Sierra Nevada Job Corps Center

POSTED

about 3 hours ago

DEADLINE

MJCC Multiple HVAC Replacement System

Solicitation # mjcc-multiple-hvac-replacement-system

Education & Training Resources (ETR) is seeking quotes for a subcontracting opportunity to perform the turnkey replacement of multiple HVAC systems at the Montgomery Job Corps Center in Montgomery, Alabama. The scope of work involves the removal of existing equipment and the installation, testing, and commissioning of new units across several buildings, including specific requirements for units ranging from 3.5 to 10 tons. Technical specifications include the use of R-454B refrigerant, Energy Star certification, and minimum EER ratings of 16 for certain units. All work must comply with the National Electrical Code, NFPA Standard No. 101, and OSHA regulations. The project requires a 5-10 year warranty on parts and a 2 year warranty on workmanship, with final payment contingent upon a signed punch list and warranty submission. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must provide a current SAM.gov UEI number, active registration, Alabama business licenses, a W-9, and an FFATA form. Submissions must include a completed bid sheet with a detailed cost breakdown, certificates of insurance, and a proposed performance schedule. Award selection is at the sole discretion of ETR and is not automatically granted to the lowest bidder. Compliance with the Davis-Bacon Act for prevailing wages is mandatory, and bonding requirements apply based on project value, with 100 percent performance and payment bonds required for projects exceeding 150,000 dollars. Bids are due by November 27, 2026, at 12:00 PM CST.

Montgomery Job Corps Center

POSTED

about 3 hours ago

DEADLINE

Joliet Job Corps-Request for Quote HVAC Replacement Female Dormitory

Solicitation # joliet-job-corps-request-quote-hvac-replacement-female-dormitory

Management and Training Corporation is seeking bids for a fixed-price, single lump sum subcontract to replace ten furnace and air conditioning systems at the Joliet Job Corps Center female dormitories in Illinois. The project includes the removal and disposal of existing units, the installation of ten new Carrier HVAC systems, and the integration of a Pelican Building Automation System across eleven units. The estimated contract value ranges from $250,000 to $500,000. Bids must be submitted to Frances McGraw by November 23, 2026, and must include a detailed cost breakout, a signed bid form, and a completed supplier self-certification packet. A physical site visit and signature on the attendance roster are mandatory prerequisites for bid submission. Award decisions will be based on overall best value. For bids of $25,000 or more, contractors must provide a bid bond equal to 20 percent of the base bid and subsequently provide performance and payment bonds from a surety company with at least an A- rating. The project is subject to the Davis-Bacon Act, requiring compliance with specific Illinois prevailing wage rates and the display of employee rights posters. Required insurance includes general liability of at least $1,000,000 per occurrence and worker's compensation with employer liability limits of $500,000. Performance dates will be established during a pre-construction meeting following the issuance of a Notice to Proceed.

Joliet Job Corps

POSTED

about 3 hours ago

DEADLINE

ACT-0124-00 BNATCS: Installation of two (2) existing Chillers Bldg. 366 at the Willima J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-0124-00-bnatcs-installation-two-2-existing-chillers-bldg-366-willima-j-hughes-technical-center

This solicitation, managed by PTSI Managed Services Inc., involves the installation of two existing chillers at Building 366 of the William J. Hughes Technical Center in Atlantic City, New Jersey. The scope of work encompasses the installation of electrical power, control interface connections, and chilled water piping, as well as the final start-up of the equipment. The estimated magnitude of construction for this project is between 250,000 and 500,000 dollars, with primary NAICS codes including 238220, 238210, and 238290. The opportunity is designated as a small business set-aside, welcoming bids from SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by the deadline of November 18, 2026. Denise Buergey serves as the primary point of contact for this procurement effort.

PTSI Managed Services Inc.

POSTED

about 3 hours ago

DEADLINE

Centennial Dry Sprinkler System & Compressor Replacement Services

Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services

Management & Training Corporation is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project scope involves the demolition and removal of existing distribution piping and air compressors, followed by the installation of new infrastructure to eliminate leaks and prevent equipment short-cycling in the Men's Dormitory, Women's Dormitory, and Recreation Building. All work must be completed within 30 consecutive business days from the Notice to Proceed and must adhere to NFPA 25 standards and local, state, and national codes. Bids are due by December 1, 2026, and must include a base bid and detailed cost breakout. A physical site visit and signature on the attendance roster are mandatory for bid consideration. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required at submission, and performance and payment bonds from an A-rated surety must be provided within five business days of an Intent to Award. The contract is set aside for HUBZone, Woman-owned, and Service-Disabled Veteran-owned small businesses. Award decisions will be based on overall best value and bidder responsiveness. The contractor must comply with prevailing wage rates per the Davis-Bacon Act, submit weekly certified payroll reports, and adhere to FAR regulations regarding small business utilization and the protection of government interests. Final payment is contingent upon the submission of a Notice of Final Completion, release of liens, and the delivery of two sets of operation and maintenance manuals. Liquidated damages of $100 per consecutive calendar day will be applied for incomplete or unsatisfactory work.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 3 hours ago

DEADLINE

Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006

Solicitation # S26-006

Adams and Associates, Inc. is seeking qualified mechanical and plumbing contractors for a subcontracting project at the Glenmont Job Corps Center in Glenmont, New York. The scope of work involves the removal and disposal of four existing 505-gallon domestic hot water storage tanks and the installation of four new 500-gallon insulated storage tanks, with two tanks per dormitory. Additionally, the contractor must replace four heat exchangers and install one new bronze Bell and Gossett circulator pump in the North Dormitory. Comprehensive associated services include piping modifications, electrical disconnections and reconnections, insulation, rigging, and the provision of a temporary hot water heater to ensure the facility remains operational during the estimated construction period of two and a half to three weeks. Proposals are due by November 9, 2026, at 4:00 PM ET, following a pre-proposal site walkthrough on October 29, 2026. Award decisions will be based on a weighted evaluation of price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent), meaning the lowest price does not guarantee selection. Contractors must comply with New York State statutory requirements for Workers Compensation and Employers Liability Insurance, as well as Davis-Bacon prevailing wage requirements. Required submission documents include a current W-9, a completed Vendor Questionnaire with UEI and NAICS codes, New York State licenses, and certificates of insurance. Payment terms are Net 30 days upon completion and receipt of invoice.

Adams and Associates, Inc.

POSTED

about 3 hours ago

DEADLINE

Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)

Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units

The Career Systems Development Corporation is soliciting proposals for the total replacement of twenty failed ceiling-mounted water source heat pumps at the Roswell Job Corps Center Male Dormitory Building 558 in New Mexico. The scope of work includes the removal and off-site disposal of the damaged units and the installation of new Bosch 1-ton units or an equivalent model. The installation must encompass all necessary ducting, electrical work, thermostat wiring, flexible hoses, and pressure valves. Additionally, the contractor must perform critical safety upgrades by installing smoke dampers with fusible links in all vents leading into the plenum and ensuring all installed plenum materials are plenum rated. All work must comply with NFPA 101, NFPA 70, and applicable plumbing, mechanical, and building codes. This project is set aside for small businesses, including certified veteran, service-disabled veteran, women-owned, and HUBZone small businesses. It is subject to the Davis Bacon Act Wage Determination NM20260014, requiring the submission of weekly certified payroll reports for invoice approval. Proposals exceeding 100,000 dollars will require 100 percent payment and performance bonding upon award. Qualified respondents must be licensed, certified, and insured, providing a detailed technical approach, cost breakdown for labor and materials, equipment cut sheets, and warranty information. Final project completion requires the delivery of operation manuals to the Facility Manager.

Career Systems Development Corporation

POSTED

about 3 hours ago

DEADLINE

Exeter Job Corps Boiler Room Pump Replacement

Solicitation # exeter-job-corps-boiler-room-pump-replacement

The Exeter Job Corps is seeking a qualified contractor for the replacement of boiler room pump number two. The project requires the installation of a new TACO pump model TACF1511, along with the integration of new valves, fittings, gauges, and thermo-wells. Work will be performed in Rhode Island under NAICS code 238220. Eligible bidders must be licensed, insured, and possess an active UEI registration. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 6, 2026.

Exeter Job Corps

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

ENETX Bus Monitor SupplyThis subcontract involves the supply of ENETX-1553 and ARINC 429 Bus Monitors to prime contractors supporting Department of the Air Force projects. The scope of work requires the provision of brand-name hardware and the application of Unique Item Identifiers using ISO/IEC 15434 standards for any units valued at $5,000 or more. All marking must be performed using DoD-compliant data matrix symbol equipment. The final deliverables consist of two physical bus monitors and a corresponding Material Inspection and Receiving Report containing the necessary UID data. The project is managed under the Department of Defense through the FA9101 Aedc Pkp Procurement Branch, with the place of performance located at Holloman Air Force Base.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Solicitation # FA910127RB001

Facilities Support Services

POSTED

DEADLINE

in about 2 months

Solicitation # FA910127QB002

Solicitation FA910127QB002 is a combined, firm-fixed-price procurement for the Department of the Air Force, specifically supporting the 704th Test Group and 746th Test Squadron at Holloman Air Force Base, New Mexico. The primary objective is the acquisition of manufactured commercial hardware to support the integration, maintenance, and troubleshooting of the Ultra High Accuracy Reference System and customer Units Under Test. The required deliverables include two ENETX-MA4-2F4 Converter Appliances, two ENETXCAB-MA4-J1-01 interface cable assemblies for power and MIL-STD-1553, and two ENETXCAB-MA4-J2-02 interface cable assemblies for ARINC-429. All equipment must be RoHS compliant and adhere to the Alta dt Hardware Manual. This procurement is a 100% Small Business Set-Aside for brand-name items, specifically requiring genuine OEM Alta dt parts; offers of alternate brands will be deemed technically unacceptable. Award will be granted to a responsible source that is technically acceptable and provides a fair and reasonable price, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Delivery is required within 10 weeks from the date of award receipt, with shipping terms set as FOB Destination. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American program, safeguarding covered defense information, and prohibitions on certain procurements from the Xinjiang Uyghur Autonomous Region and the Maduro regime. Quotes must be submitted electronically by November 20, 2026, and must include a total firm-fixed-price quote and confirmation of active SAM.gov registration.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Tunnel 9 Pitch Upgrade

Solicitation # FA9101T9PU

The Arnold Engineering Development Complex (AEDC) is seeking a small business contractor for the comprehensive modernization of a high-performance hydraulic motion system at Tunnel 9 in Silver Spring, Maryland. This Firm-Fixed-Price requirement is a 100% Small Business Set-Aside and follows a three-phase execution model: Phase 1 covers engineering and design; Phase 2 involves manufacturing, testing, and delivery; and Phase 3 encompasses the disassembly of the existing system, installation, start-up, and commissioning. The total period of performance is 46 weeks from the date of award. The scope of work requires the design, procurement, fabrication, and installation of core components, including a Hydraulic Power Unit, a dedicated filtration and cooling kidney loop, a main actuating cylinder with a 120.5-inch working stroke and 13 ft/s linear speed, and a primary control valve with a step response time of 55 ms or less. All deliverables must adhere to ASME B31.1, ASME BPVC VIII, and ISO 4406 standards. Contractors must provide weld inspection certifications and material certifications of conformance. Award will be based on the most advantageous offer, evaluating technical capability on an acceptable/unacceptable basis, followed by an assessment of past performance and price reasonableness. Security requirements include CMMC Level 1 (Self) certification and the ability to access Controlled Unclassified Information. Final acceptance will occur at the Silver Spring site following successful integration and verification testing.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Hydraulic Component SupplyThis subcontract, titled Hydraulic Component Supply, is issued by the Department of Defense under the FA9101 AEDC Pkp Procurement Branch. The contract focuses on the procurement and delivery of raw materials and specialized hydraulic components for prime contractors working on Arnold Engineering Development Complex projects. Required deliverables include high-performance hardware such as precision valves, actuators, high-pressure hoses, and specialized hydraulic fluid, all of which must be delivered directly to the project site. The opportunity is designated as a Total Small Business Set Aside under NAICS code 333995. It was posted on November 2, 2026, with a response deadline of November 6, 2026. The place of performance for this contract is located in Silver Spring.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

DEADLINE

Hydraulic System Installation & CommissioningThis subcontract opportunity, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, involves the installation and commissioning of new hydraulic systems. The selected contractor will be responsible for the on-site installation of fabricated components and piping connections, as well as system start-up and performance testing. All work must adhere to strict quality control protocols to ensure the delivery of a fully operational hydraulic motion system. The project is designated as a total Small Business Set Aside under NAICS code 238220, with the place of performance located in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and the deadline for responses set for November 6, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

On-Site Demolition & RemovalThis subcontract opportunity, titled On-Site Demolition and Removal, is issued by the Department of Defense through the FA9101 AEDC Procurement Branch. The project involves the demolition and removal of legacy hydraulic motion system components for prime contractors at the Arnold Engineering Development Complex. Key tasks include the on-site demolition of old hydraulic lines and the removal of legacy pumps and actuators using industrial demolition tools and rigging equipment to ensure the site is cleared for new system installations. The contract is designated as a Total Small Business Set Aside under NAICS code 333996. Performance will take place in Silver Spring, zip code 20903. The solicitation was posted on November 2, 2026, with a response deadline of November 6, 2026.

Fluid Power Pump and Motor Manufacturing

POSTED

DEADLINE

Hydraulic Component Fabrication & ManufacturingThis subcontract opportunity, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, involves the fabrication and pre-assembly of core hydraulic system components. The selected contractor will be responsible for off-site manufacturing of custom components, the pre-assembly of hydraulic circuits, and rigorous factory testing utilizing precision machining tools. Once completed, all fabricated components must be delivered to the project site to support prime contractors. The project is designated as a total Small Business Set Aside under NAICS code 333999, with the place of performance located in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and a response deadline of November 6, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Hydraulic System Design & EngineeringThis small business set-aside subcontract, managed by the Department of Defense under the Arnold Engineering Development Complex Procurement Branch, focuses on the detailed engineering and design of high-performance hydraulic motion systems. The selected contractor will be responsible for developing technical approaches, system designs, and engineering specifications to establish a comprehensive roadmap for fabrication and installation. Key deliverables include the final engineering design package, technical specifications, and all necessary approved design documents. The project falls under NAICS code 541330 and is designated for performance in Silver Spring. Interested parties should note the tight response window, with the solicitation posted on November 2, 2026, and a response deadline of November 6, 2026.

Engineering Services

POSTED

DEADLINE

Sensor & Instrumentation SupplyThis subcontract, managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, involves the supply of high-precision force and displacement sensors for prime contractors supporting Air Force Headquarters Air Force Test Center projects. The scope of work includes the procurement and delivery of high-resolution displacement measurement systems and advanced 6-DOF force/moment sensor arrays that support real-time dynamic feedback. All delivered equipment must be accompanied by necessary calibration certifications to ensure operational accuracy. The performance of this contract will take place at Wright Patterson AFB. Interested parties should note that the solicitation was posted on November 2, 2026, with a response deadline of December 2, 2026. The requirement falls under NAICS code 334517, focusing on the specialized instrumentation needed for advanced aerospace testing and measurement.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

Facility Site Preparation & Utility ModificationThis subcontract for Facility Site Preparation and Utility Modification involves performing critical infrastructure work for prime contractors at Wright-Patterson AFB Building 31A Area B. The scope of work focuses on executing industrial electrical upgrades and civil foundation modifications to support Air Force Headquarters Air Force Test Center projects. All activities must be completed in strict accordance with local building codes and Air Force base facility standards to ensure a fully prepared installation site. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project falls under NAICS code 238210. The contract was posted on November 2, 2026, with a response deadline of December 2, 2026. The primary objective is the delivery of necessary power and foundation supports required for subsequent project phases.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

High-Capacity Load Frame & Table FabricationThis subcontract involves the manufacture of a high-load, multi-axis dynamic load frame and a high-capacity table to support prime contractors on projects for the Air Force Headquarters Air Force Test Center. The scope of work encompasses material procurement, heavy industrial fabrication, and the factory integration of load-bearing structures. To ensure structural integrity and safety, the contractor must provide material certifications verifying that all components can handle the specified high-load capacities. The project is managed under the Department of Defense through the FA9101 Aedc Pkp Procurement Branch, with performance taking place at Wright Patterson AFB. Classified under NAICS code 332312, the contract requires the final delivery of the fully fabricated and integrated load frame and table assembly. Interested parties must adhere to the response deadline of December 2, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS