Top

Concrete Foundations and Slabs

Active

International

Response Deadline07/31/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

238110 - Poured Concrete Foundation and Structure ContractorsView NAICS

Place of Performance

Canada, National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 07:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Forming, reinforcing, pouring, and finishing of foundation walls, footings, and interior slabs.

Similar Contracts

Same NAICS industry code

NAICS: 238110

New

SLED

Deaerator (DA) and Condensate System UpgradesThe Port of Seattle’s Aviation Project Management Group is forecasting a contract to replace the Deaerator and Condensate tanks in the Central Mechanical Plant, aiming to modernize critical steam and water handling infrastructure. The work falls under NAICS code 238110, indicating it is a plumbing, heating, and air-conditioning contractor activity, and will involve the removal of outdated equipment and installation of new, compliant systems to ensure operational efficiency and safety. The project is not bound by a specific set-aside designation and is open to general contracting opportunities without restricted eligibility. Primary point of contact for inquiries is Leila Gonzalez-Rigatto, reachable via phone or email, with Matthew Piccolo serving as the project manager. All performance will occur at the Central Mechanical Plant located within the Port of Seattle’s facilities, though exact geographic details are not specified in the forecast. The solicitation was posted on July 18, 2026, and interested parties are advised to monitor the provided UI link for future official solicitation documents, as this posting serves as an early indication of upcoming procurement activity rather than a formal bid opportunity.

Aviation Project Management Group

POSTED

DEADLINE

Structural Wood Repair and ReplacementThe contract mandates the inspection and replacement of decayed or damaged structural wood within cabin frames as part of a renovation effort, with a material allowance of $3,000 per cabin. Work is to be performed at a specific location in Lebanon, Tennessee, with a response deadline of August 7, 2026. This subcontract falls under the NAICS code 238110 for residential construction and is issued by the Tennessee Department of Environment and Conservation. The project is part of a broader initiative managed by the Tennessee state government’s central procurement office, and bidders must submit proposals prior to the stated deadline to be considered for award.

Tennessee Department of Environment and Conservation

POSTED

DEADLINE

Concrete Formwork and PlacementThe contract under the title Concrete Formwork and Placement involves the formation and pouring of structural concrete for foundations, slabs, and elevated decks as part of a subcontract solicitation issued by the California Department of Corrections & Rehabilitation. Work is to be performed in California, with the solicitation posted on July 18, 2026, and a response deadline of August 4, 2026, at 7:00 PM. The work falls under NAICS code 238110, which classifies it as concrete work for building construction. The solicitation does not specify a set-aside designation or organization type, and no point of contact or detailed location information beyond the state is provided. Interested parties must submit responses through the designated California procurement portal by the stated deadline to be considered for award.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

Concrete Foundations and SlabsThe contract entails the formation, reinforcement, and pouring of concrete for foundations, footings, and floor slabs under a subcontract arrangement. Work is scoped to support structural elements critical to construction projects, with all activities required to meet industry standards for durability, safety, and code compliance. The solicitation was posted on July 17, 2026, and responses must be submitted by July 28, 2026, at 9:00 PM. The North American Industry Classification System code 238110 applies, indicating the work falls within the concrete contracting sector. The contracting entity is the County Executive Office - CPO in California, with no specific city or address provided for performance or contact details. All work is expected to be carried out within California, though the exact location of the job site is not disclosed. The procurement portal link provides access to additional details and submission requirements.

County Executive Office - CPO

POSTED

DEADLINE

Concrete Foundations and SlabsThe contract encompasses the full scope of concrete work required for foundations, slabs, and elevated decks, including formwork installation, reinforcement placement, pouring, and surface finishing to meet structural specifications. All work must be executed in accordance with industry standards and engineering requirements to ensure durability and safety of the structural elements. The opportunity is identified as a subcontract under NAICS code 238110 and is openly posted by the Utah agency with a response deadline of August 5, 2026. Interested parties must submit their proposals before the deadline to be considered, and performance is expected to occur within Utah, though exact location details are not specified. The solicitation does not indicate a set-aside classification or point of contact, and bidders are directed to the provided online portal for further instructions and documentation.

POSTED

DEADLINE

Concrete Pavement Repair and ReplacementThe contract calls for the full or partial replacement of degraded concrete slabs on the fire station driveway, encompassing all phases of repair including demolition and removal of existing material, preparation of the sub-base, installation of formwork, pouring and finishing of new concrete, and proper curing to ensure durability. Work must adhere to industry standards for structural integrity and surface quality, with attention to safety and long-term performance given the critical nature of the facility. The project is classified under NAICS code 238110 for concrete work and is solicited as a subcontract opportunity by the City of Rome in Georgia. All responses are due by August 11, 2026, and the solicitation was posted on July 17, 2026, with further details available through the provided online portal.

POSTED

DEADLINE

Concrete Forming and PlacementThe contract titled Concrete Forming and Placement involves the supply and placement of reinforced concrete for structural foundations and slabs under a subcontract agreement. It is classified under NAICS code 238110, indicating it pertains to concrete work specifically for construction purposes, and is managed by the state of Utah through its designated agency office. The opportunity was posted on July 17, 2026, with responses due no later than August 14, 2026, at 9:00 PM. The work is expected to be performed within Utah, though exact location details are not specified. There is no set-aside designation or additional demographic or small business preferences indicated. Interested parties must submit their proposals through the provided Utah BonfireHub portal by the stated deadline.

POSTED

DEADLINE

Concrete Forming and PouringThe contract titled Concrete Forming and Pouring involves the full scope of formwork construction, reinforcement installation, and concrete placement for foundational elements, slabs, walls, and other structural components. This subcontract is targeted at qualified contractors capable of executing precise and code-compliant concrete work in alignment with structural engineering specifications. The work is tied to a project under the Health and Human Services Commission in Texas, with performance required at an unspecified location within the state. Participation in this opportunity is open to eligible subcontractors who can meet the technical and logistical demands of the project, with responsiveness governed by the established timeline and federal procurement standards for construction services under NAICS code 238110. The solicitation was posted on July 17, 2026, with all proposals due no later than August 7, 2026, at 4:30 PM Central Time. Interested parties must submit their responses through the designated Texas SmartBuy portal before the deadline to be considered. While no set-aside designation or organizational type restrictions are specified, bidders are expected to demonstrate relevant experience, proper licensing, and capacity to deliver high-quality concrete work in compliance with safety and building standards. All details regarding performance location, point of contact, and technical requirements must be obtained directly from the official online listing at the provided Texas SmartBuy link, as no additional information is included in the public posting.

Health and Human Services Commission

POSTED

DEADLINE

Concrete Forming and PlacementThis contract pertains to the forming, reinforcement, and pouring of structural concrete for foundations, slabs, and walls, encompassing all necessary labor, materials, and equipment to meet specified construction standards. The work is classified under NAICS code 238110, indicating it falls within the concrete work category for building construction, and is structured as a subcontract opportunity with no set-aside designation. The solicitation was posted on July 17, 2026, and responses must be submitted by August 21, 2026, with the performance location tied to Arkansas under the jurisdiction of Rock Region METRO. While specific details about the project site, point of contact, or exact scope beyond the concrete work are not provided, the contract requires adherence to industry best practices for structural integrity and safety during all phases of concrete placement. Bidders must be prepared to demonstrate experience in structural concrete systems and compliance with applicable codes and regulations governing construction in the region.

POSTED

DEADLINE

Concrete Forming and PouringThe contract titled Concrete Forming and Pouring is a subcontract under NAICS code 238110, focused on the full scope of concrete work including formwork installation, reinforcement placement, and the pouring of concrete for foundations, slabs, and other structural elements. The work is being procured by the Water System under the Georgia agency, with performance expected to occur in an unspecified location within the state. The solicitation was posted on July 17, 2026, and responses must be submitted no later than August 27, 2026, at 4:00 PM Eastern Time. No set-aside designation or organizational type restrictions are specified, and no point of contact details are provided. Interested parties can access further information through the procurement portal link provided.

POSTED

DEADLINE

Complete ADA-Compliant Concrete Ramp InstallationThe contract specifies the full installation of ADA-compliant concrete ramps at multiple public right-of-way locations within the City of Dunwoody, Georgia. The scope includes all preparatory and construction activities necessary to meet accessibility standards, such as formwork construction, concrete pouring, surface finishing, and seamless integration with existing sidewalks and curbs. The work must ensure compliance with Americans with Disabilities Act requirements to provide safe and accessible pedestrian pathways for individuals with mobility impairments. The solicitation is classified as a subcontract under NAICS code 238110 for site preparation and paving contractors. The opportunity was posted on July 17, 2026, with responses due by August 3, 2026. Performance is limited to public right-of-way locations within Dunwoody, and although the agency's office address and point of contact details are not provided, the contract is administered through the Georgia Department of Administrative Services via the state’s procurement portal. Bidders are expected to demonstrate experience in ADA-compliant infrastructure projects and must coordinate closely with existing public infrastructure to ensure safety and regulatory adherence throughout installation.

POSTED

DEADLINE

Concrete Forming and PlacementThe contract titled Concrete Forming and Placement encompasses the full scope of forming, reinforcing, and pouring concrete for slabs, walls, footings, and other structural elements required for construction projects. It is issued as a subcontract under NAICS code 238110, indicating it falls within the concrete contracting industry, and is managed by MSO - CMED with the Kansas office overseeing the procurement. The solicitation was posted on July 17, 2026, with a firm deadline for responses set for August 4, 2026, at 8:30 PM. The place of performance is not specified beyond the state level, and no set aside or minority business designation is indicated. Interested parties must submit proposals through the provided online portal before the deadline to be considered for award.

POSTED

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 238190

New

International

M-10 Partial Exterior Envelope ReplacementThe contract pertains to the exterior envelope and main entrance renewal of Building M-10 at the National Research Council Canada’s campus located at 1200 Montreal Road, Ottawa, Ontario, K1A 0R6. This procurement, identified by solicitation number 26-58015 under NAICS Code 238190, is exclusively open to Canadian suppliers due to the Policy on Reciprocal Procurement, and submissions from non-trading partners will be rejected. Bidders are required to attend one of two mandatory site visits on June 16 or 17, 2026, at the main entrance of Building M-10. Proposals must be submitted by July 22, 2026, and all work must be completed by March 31, 2027, with a performance period of 36 weeks from notification of award. The scope includes demolition, concrete restoration, metal fabrications, thermal and moisture protection systems, aluminum doors and glazing, gypsum board assemblies, and granular backfill, all executed in accordance with specified construction sections and technical requirements. Contractors must retain a qualified geotechnical engineer for investigations and testing, and all materials must be delivered in original factory packaging, labeled with manufacturer details, and stored off the ground in dry, clean, well-ventilated areas per manufacturer instructions. Packaging waste must be removed and returned as per the Construction Waste Management Plan. The contractor is obligated to comply with stringent security protocols, including valid Security Clearance for all personnel as outlined in SC01, and must maintain site security during alterations. Performance and payment bonds in prescribed government formats, issued by federally, provincially, or territorially licensed sureties, are mandatory. Insurance coverage must be obtained from insurers licensed to operate in Canada, and compliance with both Ontario and federal occupational health and safety regulations is required. All quality control testing must be conducted by independent agencies paid for by the contractor, with reports submitted digitally and including project identification, agency details, and dates. Final aesthetic standards demand defect-free surfaces, with walls and ceilings inspected under specified viewing conditions and lighting, and all products must be new, undamaged, and of the highest quality. The contractor must maintain complete and accurate financial records in machine-readable formats such as Excel, available for audit at Canada’s request during normal business hours. Cost breakdowns must be submitted within 72 hours of award and serve as the basis for all claims. A master Gantt

Other Foundation, Structure, and Building Exterior Contractors

POSTED

DEADLINE

Indigenous Participation Plan (IPP) Implementation

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Watermain Pipes and Fittings Supply

Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers

POSTED

DEADLINE

Environmental Compliance and GHG Reporting

Environmental Consulting Services

POSTED

DEADLINE

Surveying and As-Built Documentation

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Watermain Installation and Excavation

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

HVAC System Installation

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Site Grading and Earthwork

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Plumbing and Piping Systems

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Installation and Wiring

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

FurnitureThis procurement solicitation under reference number 25-58244 B is issued by the National Research Council of Canada for the purchase, delivery, and installation of office furniture at Building M-38, 1200 Montreal Road, Ottawa, Ontario, with a required delivery and installation date of October 2, 2026. The requirement falls under the PWGSC Furniture for Workspaces Supply Arrangement E60PQ-140003/D and targets Product Categories 2 (Work Surface Products), 3 (Filing and Storage Products), 5 (Ancillary Products), and 6 (Collaborative Products), specifying precise quantities for items such as fixed height work surfaces, hutches, personal storage towers, monitor arms, power modules, cable troughs, and various meeting and collaborative tables. All proposed products must comply with the ANSI/BIFMA e3 Furniture Sustainability Standard at Level® 2 and adhere to Government of Canada Workplace Fit-up Standards, with technical specifications outlined in Annex A being verified by NRC against mandatory criteria. Only suppliers holding a pre-qualified Supply Arrangement under the designated SA series are eligible to respond, though non-SA holders may submit bids if they simultaneously apply for an arrangement with the Supply Arrangement Authority. The evaluation process is based on lowest evaluated price, with two mandatory pass/fail gates: submission of detailed drawings and specifications for NRC verification, and a firm confirmation of the October 2, 2026 delivery commitment; failure to meet either results in non-responsiveness. Offers must be submitted electronically in two separate, labeled attachments—Technical Offer and Financial Offer—with no financial data permitted in the technical submission, and all submissions limited to 10MB without zip files or external links. Additional requirements include compliance with the Security Requirements Checklist, adherence to site health and safety protocols, and certification of continued compliance with all qualifications under the SA series, including employment equity, integrity provisions, and price certifications. Invoicing must be conducted via email to the designated NRC remittance address, and payment may be processed by credit card if the supplier’s SA permits it, while all communications must be routed exclusively through the designated contracting authority. The solicitation is governed by multiple international trade agreements including the WTO-AGP, CETA, CPTPP, and several bilateral free trade agreements, and all bids must be received by the closing deadline of July 22, 2026, at 2:00 PM

POSTED

DEADLINE

Machine Tool Manufacturing

POSTED

3 days ago

DEADLINE

in 13 days

View Details