Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CONNECTOR, AIR DUCT

Active
SPE8E8-26-T-4778Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 12 units of an air duct connector with NSN 4130-01-126-1760, issued under solicitation SPE8E8-26-T-4778 by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 167 days from the contract award date, with a specified ship date of January 18, 2027, and an original required delivery date of January 1, 2027. The product must be delivered FOB origin with zero variance in quantity and is subject to inspection and acceptance at the destination. Packaging and labeling must comply with MIL-STD-129 and ASTM D3951, but DLA Master List of Technical and Quality Requirements take precedence over ASTM standards. Palletization must adhere to RP001 DLA Packaging Requirements for Procurement. The unit of issue is each, at a price of $12.00 per unit for a total contract value of $144.00. The item is sourced from approved suppliers American Turbo Systems Inc and Chase Supply Inc with respective part numbers. All shipments must be sent to the designated DLA distribution facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20. Failure to remove government identification from non-accepted supplies is prohibited, and covered defense information protocols apply. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026.

General Info

Procure 12 air duct connectors at $12 each, deliver by Jan 18, 2027, to New Cumberland, comply with MIL-STD-129 and DLA requirements.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E8-26-T-4778.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,AIR DUCT
CONNECTOR,AIR DUCT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
AMERICAN TURBO SYSTEMS INC 0WE82 P/N 100702
CHASE SUPPLY, INC. 1RZM1 P/N TRN1002
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017586034 0001 EA 12.000
NSN/MATERIAL:4130011261760
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take
SPE8E8-26-T-4778
SECTION B
PR: 7017586034 PRLI: 0001 CONT’D
precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/18/2027 Original Required Delivery Date:01/01/2027
SPE8E8-26-T-4778 NSN/Part Number: 4130-01-126-1760 Quantity: 12 EA Purchase Request: 7017586034QTY: 12 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333415
New
DIBBS
CARTRIDGE, DEHYDRATORThe contract is for a dehydrator cartridge designed for use with refrigerant 134A, with a required quantity of 612 units to be delivered within 177 days from the contract award date, with delivery point at the origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item with a non-extendable 24-month shelf life under Type I (Code M) requirements, and it must comply strictly with MIL-STD-2073-1E packaging standards, including specified preservation methods, materials, and packing codes. All packaging and marking must adhere to MIL-STD-129 with special marking code 24 indicating open availability for inspection or use, and palletization must follow DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited in or on the item except for limited functional uses approved by NAVSEA, and portable devices containing mercury must have shockproof construction and secondary containment. The item is subject to comprehensive technical and quality requirements referenced from the DLA Master List, and covered defense information applies. Export control and hazardous materials shipping regulations must be followed per IP025 and DLAD procedural notes. The delivery destination is specified with a parcel post address in Tracy, California, and the required ship date is July 22, 2026, with the original delivery deadline set for May 12, 2027. The NSN is 4440013984573, and the contract identifies multiple qualified suppliers with their respective part numbers.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
DEHYDRATOR UNIT, NONThe item is a nonreactivating dehydrator unit, also known as a desiccator assembly, measuring 3.630 inches in length, comprised of a cover, screw cap, and connecting tube. The desiccant used must be blue, Type IV, Grade H, conforming to MIL-D-3716 specifications. The procurement is governed by the Defense Logistics Agency’s packaging requirements and is subject to Cybersecurity Maturity Model Certification Level 2 compliance, requiring the vendor to be a certified third-party assessment organization. Technical data associated with this item is controlled under export regulations, either ITAR or EAR, and its disclosure to foreign persons, regardless of location, is strictly prohibited without prior authorization from the U.S. Department of State or Department of Commerce. DFARS 252.225-7048 applies, and access to this data is restricted solely to DLA contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory training and the DLA export-controlled data questionnaire. The item’s NSN is 4440-00-858-6010, with a quantity of nine units included in Purchase Request 7017585208. Delivery is due within 167 days after award. The solicitation number is SPE8E9-26-T-3207, with a response deadline of August 3, 2026, and the procurement falls under NAICS code 333415. The contracting office is the Department of Defense’s Construction & Equipment MRO Service I, with performance located at Tinker Air Force Base, 73145-8000. Primary point of contact is Matthew Kruc, reachable via email and phone.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COVER, AIR CONDITIONERThe contract pertains to the procurement of 33 air conditioner covers identified by NSN 4130-01-618-4810 and part number 500K4486, supplied by HDT Expeditionary Systems Inc. The unit price is $33.00 per unit, totaling $1,089, with delivery required within 53 days after order placement under FOB origin terms. All items must be packaged in strict compliance with ASTM D3951, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must adhere to MIL-STD-129, including palletization as specified in RP001, and all units are to be marked with the correct Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at the destination point, with zero tolerance for quantity variance. The delivery destination is DLA Distribution Red River, Building 499, in Texarkana, Texas, with a required ship date of September 26, 2026, and an original delivery deadline of April 1, 2027. Transportation and shipping instructions follow DLAD Proc Notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 333415, issued under contract number SPE8E8-26-T-4831, with responses due by August 3, 2026. Government identification must be removed from all non-accepted supplies, and covered defense information provisions may apply.
RED RIVER RECEIVING BLDG

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
DRIER, AIR-GAS, DESICCAN
DEPOT OKLAHOMA

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
VALVE PLATE ASSEMBLThe contract pertains to the procurement of a Valve Plate Assembly identified by NSN 4130-00-830-7676 and Part Number 5H40-120A, with a quantity of 26 units to be delivered FOB origin within 167 days of contract award. The item is subject to strict packaging standards per MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container types, with all marking required to comply with MIL-STD-129 and no special marking codes applied. Delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California, and inspection and acceptance occur at the destination. The contract prohibits any intentional introduction of mercury or mercury-containing compounds into the hardware except under narrowly defined exceptions such as functional uses in batteries, lighting, sensors, weapon systems, or chemically specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendment dates. The purchase request number is 7017585202, unit price is $26.00, and total contract value is $676.00. The solicitation was issued under contract number SPE8E8-26-T-4830 with a response deadline of August 3, 2026, and is classified under NAICS code 333415. All materials must adhere to DoD unit of issue standards and government identification removal protocols for non-accepted supplies.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
MANIFOLD, CHARGING AThe contract pertains to the procurement of a MANIFOLD, CHARGING A with NSN 4130-00-814-0142 and part number AC855, under solicitation SPE8E8-26-T-4780, with a quantity of 26 units at a unit price of $26.00, totaling $676.00. Delivery is required FOB origin within 167 days of contract award, with a required ship date of January 18, 2027, and original delivery deadline of October 12, 2026. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging requirements. All DLA Master List of Technical and Quality Requirements supersede any conflicting standards. The item must not contain intentionally added mercury or mercury compounds except in specific exempted uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemicals designated by NAVSEA; portable mercury-containing devices must be shockproof and include a secondary containment per NAVSEA 5100-003D. The delivery address is DLA DIST SAN JOAQUIN, REC WHSE 57, Tracy, CA 95304-5000. Transportation and freight specifications follow DLAD PROC NOTES C19 and C20. The contract enforces zero variance in quantity, and the unit of issue is each (EA). Technical and quality requirements are governed by the DLA Master List effective on the solicitation issuance date, with designated points of contact and compliance obligations outlined for the supplier.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
CRANKSHAFT, COMPRESSThe contract is for the procurement of seven crankshafts, compressed, identified by NSN 4130-00-391-8811 and part number 5H40-562, under solicitation SPE8E8-26-T-4782. Delivery is required within 167 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. The unit of issue is each, with a fixed quantity of seven units at a unit price of $7.00, totaling $49.00. Packaging must comply with MIL-STD-2073-1E, using prescribed methods, materials, and codes, with marking adhering to MIL-STD-129 and no special markings required. Plastic materials for wrapping, cushioning, or dunnage are to be avoided whenever contractually permissible. The item is designated as a critical application item, and the use of mercury or mercury-containing compounds is strictly prohibited except in enumerated functional components such as batteries, fluorescent lights, and specific instruments or sensors as defined by NAVSEA, with additional containment requirements for portable devices. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The supplier must comply with DLA packaging, marking, and transportation directives, including DLAD Proc Notes C19 and C20, and ship to the specified postal address. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the original required delivery date is October 9, 2026, with a need ship date of January 18, 2027. Point of contact is Alexis Selby, with the contract managed by the Department of Defense through DLA District San Joaquin under NAICS code 333415.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
LOW PRESSURE AIR METhe contract pertains to the procurement of two units of a low pressure air membrane dehydrator designated by NSN 4460-01-463-0649 under solicitation SPE8E8-26-T-4803, with a required delivery within 167 days from the contract award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, wrapping, and palletization per DLA requirements. The item must not contain or come into direct contact with mercury or mercury-containing compounds except for approved functional uses such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and procurement falls under simplified acquisition rules where the revision in effect on the solicitation issue date controls. The contracting office is the DDSP New Cumberland Facility, and shipping instructions direct delivery to a specific address in New Cumberland, Pennsylvania. The required ship date is January 18, 2027, with an original delivery deadline of October 19, 2026, and the buyer must coordinate any casting or forging needs through DLA’s designated assistance portal. The contract includes covered defense information protocols and specifies no special marking beyond standard compliance.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIRThis contract pertains to the procurement of 40 units of an air filter element with NSN 4130-01-602-1062 and part number 218072992, issued by the Defense Logistics Agency Dist San Joaquin under solicitation SPE8E8-26-T-4821. The requirement specifies delivery within 167 days to the designated receipt warehouse in Tracy, California, with FOB origin terms and no tolerance for quantity variance. The filter element must conform to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific packaging methods, containment materials, and marking protocols. Palletization and shipping must adhere to DLA packaging requirements, and the item must be shipped without government identification if not accepted. The contract prohibits the intentional addition of mercury or mercury-containing compounds in direct contact with the hardware, except for specified functional uses such as batteries, lighting, instruments, sensors, controls, weapon systems, or approved chemical reagents; portable devices containing mercury must be shockproof and include a secondary containment layer in accordance with NAVSEA 5100-003D. The unit of issue is each, with a unit price of $40.00, totaling $1,600.00, and the original required delivery date was November 5, 2026, with a needed ship date of January 18, 2027. The contract includes transportation directives and a point of contact for inquiries, with compliance governed by the revision of technical requirements in effect on the solicitation issue date.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DUCTThe contract specifies the procurement of six duct-type air cooling coils identified by NSN 4130012246431 and part numbers 1336D00, 1336D01, and 4W8-31-5611T from Engineered Coil Company, with delivery required within 167 days of contract award, no later than January 30, 2027. The items must be shipped FOB origin under MIL-STD-2073-1E packaging standards with compliance to MIL-STD-129 marking, and palletization must adhere to DLA’s procurement packaging requirements. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination point. Zero variance in quantity is permitted, and all units must be free of intentionally added mercury or mercury-containing compounds except for specific functional uses outlined in NAVSEA 5100-003D, including portable lamps and instruments that must include shockproof design and secondary containment. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date. Source Approval Requests require documentation per RC001, and the product is classified as a Critical Application Item. The contract falls under NAICS code 333415 with the DLA as the administering agency, and all documentation must align with the Defense Logistics Agency’s authorized unit of issue and procurement protocols.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
HEAT EXCHANGERThe contract pertains to the procurement of two heat exchangers with part number 100522-1 and NSN 4130-01-164-1340, issued under solicitation SPE8E9-26-T-3224 by the Department of Defense through DLA. The items are classified as critical application items and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA Packaging Requirements for Procurement. Delivery is FOB origin with no tolerance for quantity variance, inspection and acceptance occur at destination, and the required delivery date is 167 days from the contract award. The delivery address is the DLA Distribution San Joaquin warehouse in Tracy, California, with a specified need ship date of January 18, 2027, and original required delivery date of August 2, 2027. Transportation instructions are governed by DLAD PROC NOTES C19 and C20. The unit of issue is each, with a total contract value based on a unit price for two units, and all packaging and documentation must reflect the correct unit of issue per official DLA guidelines.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
IMPELLER, FAN, AXIALThis contract specifies the procurement of an axial fan impeller with the NSN 2930-01-161-7714 and part numbers 10510380 and 40137-1, with a quantity of two units required under solicitation SPE7L5-26-T-4541. Delivery is due in 211 days from the contract date, with FOB origin terms and acceptance occurring at the destination. The item is classified as a critical application component, and strict compliance with DLA's Master List of Technical and Quality Requirements is mandated, overriding any conflicting specifications. Ozone-depleting chemicals are expressly prohibited, and any substitute chemicals must be pre-approved unless already authorized by the specification. Packaging must adhere to ASTM D3951 and MIL-STD-129 standards, with palletization following DLA’s RP001 packaging requirements, while the unit of issue is each (EA) and quantity variance is strictly zero percent. The delivery location is the DLA Distribution facility in New Cumberland, Pennsylvania, with the need ship date set for October 7, 2025, and the original required delivery date of July 27, 2026. All markings and identification must comply with RQ017, including removal of government identification from non-accepted supplies, and transportation logistics follow referenced DLAD procedural notes. The contract is managed by the Department of Defense’s Land Supplier Operations Engines office, with Mary Rowley as the primary point of contact.
LAND SUPPLIER OPNS ENGINES

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332313
New
DIBBS
DECONTAMINATION SUBThis contract pertains to the procurement of a decontamination subsystem for personnel, identified by part number H-807S and NSN 4230-01-606-7328, with a quantity of twelve units to be delivered FOB origin within 105 days. The item is classified as a commercial item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s packaging requirements. No asbestos as defined by FED-STD-313 is permitted, and mercury or mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lights, certain instruments, weapon systems, or chemical reagents approved by NAVSEA; in those cases, portable devices must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Documentation for source approval is required, and government identification must be removed from any non-accepted supplies. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is November 17, 2026, with an original delivery target of January 25, 2027. Transportation logistics are governed by DLAD procedural notes C19 and C20, and all units of issue follow DoD standards as referenced in the official DLA unit of issue file.
Plate Work Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract specifies the procurement of two power supply units identified by NSN 6130-01-461-4359 and part number AW50S/28-A-ER, supplied by SURE POWER, INC, under solicitation SPE7L7-26-T-4402. Delivery is required within 182 days from the contract date, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container specifications, with marking adhering to MIL-STD-129 and palletization following DLA’s packaging requirements. The power supplies must not contain intentional additions of mercury or mercury compounds, except in permitted exceptions such as batteries, fluorescent lighting, sensors, and weapon systems specified by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment. Sampling for quality verification follows MIL-STD-1916 or comparable zero-based inspection plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise stated. The item is to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, and the original required delivery date was October 14, 2026, with a revised need date of February 2, 2027. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on contract type and amendment dates.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
COLLECTOR, DUSTThe contract pertains to the procurement of a DUST COLLECTOR under solicitation SPE8E8-26-T-4793, with a unit of issue of each (EA) and a total quantity of 18 units. The item is identified by NSN 4460-01-423-6533 and has a unit price of $18.00, resulting in a total price of $324. Delivery is required within 167 days from the contract award, with delivery terms set to FOB origin. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, and marked according to MIL-STD-129 with no special marking required. Palletization must adhere to DLA’s packaging requirements, and the final destination is the DDSP New Cumberland Facility in Pennsylvania. The contract enforces stringent material restrictions, prohibiting the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The procurement is governed by technical and quality standards referenced from the DLA Master List, with revisions determined based on solicitation and award timelines. Inspection and acceptance occur at the destination. The delivery deadline is January 18, 2027, originally required for September 8, 2026. All transportation logistics are directed per DLAD Proc Notes C19 and C20, and point of contact for inquiries is Alexis Selby at the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
VALVE, CONTROLThis contract specifies the procurement of a control valve identified by NSN 4410008629398 and part number 020360DU from Clyde Bergemann Inc, with a quantity of five units to be delivered FOB origin within 167 days. The item is classified as a critical application component, and all supplies must strictly comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including packaging, marking per MIL-STD-129, and palletization standards. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The contract includes no variance in quantity, with inspection and acceptance occurring at the destination, and requires adherence to DLA’s technical and quality standards referenced from the DLA Master List. Delivery is to be made to the DDSP New Cumberland Facility in Pennsylvania, with a required ship date of January 18, 2027, and the solicitation was issued as a Women-Owned Small Business Set-Aside under NAICS code 332410 with a response deadline of August 3, 2026.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326191
New
DIBBS
PLUMBING SUB-ASSYThe contract is for the procurement of a plumbing sub-assembly identified by NSN 4510-01-601-1511, with a quantity of 28 units, under purchase request 7017585193. Delivery is required within 167 days after award, and the solicitation number is SPE8E8-26-T-4824, with a response deadline of August 3, 2026. The solicitation was posted on July 22, 2026, and is managed by the DLA New Cumberland Facility under the Department of Defense. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the specified DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to removal of government identification if not accepted. The NAICS code is 326191, and the place of performance is New Cumberland, Pennsylvania, with Alexis Selby listed as the primary point of contact via email and phone.
Plastics Plumbing Fixture Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
BOILERThe contract pertains to the procurement of a single boiler unit identified by NSN 4410-01-667-3882 and part number 61301608364, supplied by GETINGE USA SALES, LLC and GETINGE USA INC, under solicitation SPE8E8-26-T-4805. The requirement is part of a total small business set-aside under NAICS code 332410, with delivery due in 167 days from the contract award, targeting a ship date of January 18, 2027, and an original delivery deadline of December 31, 2026. The item is to be delivered FOB origin with zero variance in quantity, inspected and accepted at destination, and must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Packaging must be palletized per DLA requirements, using specified methods and materials, and shipped to the DLA Distribution facility at New Cumberland, PA. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions controlled by the solicitation or award date depending on acquisition size. Documentation for source approval, removal of government identification from non-accepted items, and covered defense information protocols also apply. The point of contact for the contract is Alexis Selby, reachable via email and phone provided.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEETThe contract involves the procurement of four units of plastic sheet identified by NSN 9330-01-550-5779 under solicitation SPE8E5-26-T-3658, with a delivery requirement of 167 days after award. The sourcing is governed by DLA packaging and technical quality requirements referenced through R and I numbers, which are defined in the DLA Master List of Technical and Quality Requirements accessible online. Compliance with these requirements is mandatory, and the applicable revision of the master list depends on whether the acquisition is simplified or large, with the relevant date being either the solicitation issue date, award date, or amendment date if modified. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied items, except in specific exempted cases such as batteries, fluorescent lights, designated instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier, in accordance with NAVSEA 5100-003D. The place of performance is New Cumberland, Pennsylvania, with the contract managed by the Defense Logistics Agency’s New Cumberland Facility under the Department of Defense. The point of contact is Don Trachtman, reachable via email and phone listed. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 444180
New
DIBBS
FOUNTAIN, EYE AND FACEThe contract is for the procurement of 260 portable, self-contained eye and face wash stations manufactured by Bradley Corporation, part number S19-921, meeting ANSI Z358.1 standards. Each unit features gravity flow, an 8-ounce bottle of water preservative, and is designed to deliver a 15-minute flush with a 7-gallon capacity. The equipment must be counter or wall mounted and comply strictly with DLA packaging, marking, and shipping requirements under MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Mercury or mercury-containing compounds are prohibited from direct contact with the hardware except under specific exceptions for functional components like batteries or sensors, with additional containment rules for portable devices per NAVSEA 5100-003D. The product is identified by NSN 4240-01-234-1796, and delivery is required FOB origin within 28 days to the DDSP New Cumberland Facility in Pennsylvania, with a required ship date of April 24, 2026. The contract is subject to DLA’s Master List of Technical and Quality Requirements, and the solicitation is a total small business set-aside under NAICS code 444180, issued under contract number SPE8E6-26-T-3792 with a response deadline of August 3, 2026.
Other Building Material Dealers

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
COMPENSATOR, BUOYANCThe contract specifies the procurement of 33 units of the COMPENSATOR, BUOYANC with NSN 4220-01-524-8491 and part number RANGER BC/M from ZEAGLE SYSTEMS INC, issued under solicitation SPE8E6-26-T-3791. Delivery is required within 167 days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and palletization requirements per RP001, with each unit packaged in accordance with the specified unit of issue and quantity per unit pack. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 18, 2027, following an original required delivery date of September 12, 2026. Transportation logistics are governed by DLAD Proc Notes C19 and C20, and the item is subject to potential Covered Defense Information protocols under RD003. All technical, quality, and packaging specifications referenced take precedence over general industry standards.
All Other Rubber Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
WIRE FABRICContract SPE8E4-26-T-1908 specifies the procurement of 10 rolls of steel welded wire fabric, each roll measuring 60 inches wide and 150 feet long, with a square mesh of 6 inches by 6 inches and filament size of 0.1920 inches, featuring unfinished edges. The product must comply with ASTM A1064/A1064M Revision dated April 15, 2024, and is subject to technical and quality requirements from the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over all other standards including ASTM D3951. Each shipment requires a Certificate of Quality Compliance or Mill-Material Certification, with copies provided to both the recipient and the DLA Troop Support Contracting Officer. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are verified at specified levels. Packaging must conform to MIL-STD-129 and DLA Packaging Requirements RP001, with palletization and unit packing as defined, while transport and delivery are governed by DLA procedural notes. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with delivery due 167 days after contract award under FOB Origin terms, no quantity variance permitted, and inspection and acceptance occurring at the destination. The purchase request number is 7017585539, with the original required delivery date of February 18, 2027, and a need ship date of January 18, 2027.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
PURIFIER UNIT, AIRThe contract is for the procurement of eight air purifier units, identified by NSN 4460-01-460-6553 and part number 080143 from BAUER COMPRESSORS, INC., under solicitation SPE8E8-26-T-4794. Delivery is required within 151 days of contract award, with shipment originating FOB origin and no tolerance for quantity variance. The units must comply with strict packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping materials, and unit container specifications, and must be palletized according to DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited unless part of exempted functional components like batteries or instruments, and any such exempted items must include a secondary containment as specified by NAVSEA 5100-003D. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation issue date. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with a required ship date of January 2, 2027, although the original delivery deadline is September 30, 2026. Inspection and acceptance occur at the destination point, and special marking is not required. Transportation and freight shipping instructions align with DLA Procurement Notes C19 and C20. The contract falls under NAICS code 333413 and is managed by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Alexis Selby. All supplies must be free of government identification upon rejection and meet the full scope of defense acquisition regulations regarding controlled information, as this is designated as a critical application item.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
LIGHT, NAVIGATIONAL,The contract pertains to the procurement of 70 units of a navigational light, identified by NSN 6220-01-628-9651 and part number 34000-7 manufactured by GLAMOX AQUA SIGNAL CORPORATION, under solicitation SPE8E7-26-T-3386. Delivery is required within 167 days from the award date, with terms set at FOB origin and no variance allowed in quantity, meaning exactly 70 units must be delivered. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129 for marking, including precise codes for packaging methods, materials, and containers as specified. The item is subject to DLA’s Packaging Requirements for Procurement and Hazmat packaging standards, with shipments directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements referenced from the DLA Master List, and all provisions are governed by the version of the master in effect on the solicitation issue date. The original delivery deadline is December 14, 2026, but the needed ship date is set for January 18, 2027, allowing time for processing and logistics. Payment is based on a unit price of $70, resulting in a total contract value of $4,900. The point of contact for inquiries is Kelly Mitchell of the Department of Defense, with all correspondence and compliance governed under DLA procedures and federal acquisition standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details