Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Conversion Appliance System Service (CASS)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Conversion Appliance System Service (CASS) is designed to facilitate the transition from legacy Time-Division Multiplexing (TDM) systems to modern IP-based network infrastructures by integrating commercial-off-the-shelf and Non-Developmental Item hardware and software components wherever feasible. This approach ensures cost-effectiveness, reduces development time, and leverages proven technologies to meet the Federal Aviation Administration’s operational needs. The system will be procured and deployed under an 8(a) Sole Source solicitation, exclusively available to small businesses certified under the SBA’s 8(a) program, reflecting a strategic commitment to fostering small business participation in federal contracting. The procurement is anticipated under NAICS code 334290, which covers other electronic component manufacturing, and is managed by the FAA National Headquarters under the Department of Transportation. The forecast was posted on September 24, 2025, with point of contact information provided for inquiries, including Genene Jones for technical matters and Christine Sager as the Small Business Specialist. Although specific performance locations and contact addresses are not detailed, the system’s deployment will support nationwide FAA network modernization efforts. The Independent Government Cost Estimate outlines projected expenses for acquiring and implementing the CASS, emphasizing fiscal responsibility and alignment with agency infrastructure goals.

General Info

8(a) sole source procurement for CASS to modernize FAA TDM to IP systems using commercial components.

Agency

Department of Transportation → FAA - FAA National Headquarters

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

AL, US

Set-Aside

8AN

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment of Transportation → FAA - FAA National Headquarters
Contacts2 people available
OfficeN/A
Organization / Agency
Department of Transportation → FAA - FAA National Headquarters
Office AddressN/A
Contacts
Genene Jones
contact@example.gov
Christine Sager
contact@example.gov

Full Description

Show more
The CASS System should be composed of commercial-off-the-shelf (COTS) and Non-Developmental Item (NDI) hardware and software components to the maximum extent practicable. This Independent Government Cost Estimate (IGCE) documents projected costs for the procurement and deployment of the TDM-IP Conversion Appliance System (CASS). The primary purpose of the system is to enable seamless migration from legacy Time-Division Multiplexing (TDM) to modern IP-based network infrastructures.

Similar Contracts

Same NAICS industry code

NAICS: 334290
New
DIBBS
INSTALLATION KIT, ELECT
Solicitation # SPE4A0-26-T-4019
The contract is for the procurement of four installation kits for electronic equipment, identified by NSN 5895-01-626-0556, with delivery required within five days after award to a military location in Poland. The solicitation is a total small business set-aside under NAICS code 334290, issued by the Department of Defense’s Aviation Supply Chain ESOC Buys office, with proposals due by August 5, 2026. All kits must be fully assembled, properly packaged in compliance with MIL-STD-2073-1E and DLA RP001, and marked according to MIL-STD-129 including barcoding and detailed contents lists. Packaging must use preservation method code 10 (Clng/Dry) with no preservation or wrap materials applied, and items must be shipped FOB origin. The contract includes stringent export control obligations under ITAR or EAR, limiting access to technical data to contractors approved by DLA, holding valid JCP certification, and having completed mandatory training. Cybersecurity requirements mandate CMMC Level 2 compliance through either a self-assessment or certified third-party assessment, and safeguarding of covered defense information is governed by DFARS 252.204-7012 and NIST SP 800-171 assessments. Hazardous materials must comply with OSHA HazCom standards and DFARS 252.223-7001, with prohibitions on hexavalent chromium and restricted storage or disposal of toxic substances without written approval. Radioactive materials require advance notification and specific labeling. All deliveries are subject to government inspection and acceptance at destination using zero-based sampling plans with stringent AQLs—0.1 for critical, 1.0 for major, and 4.0 for minor defects. Contractors must be registered in SAM, provide a UEI and CAGE code, and confirm small business status, with additional reporting required if offering covered telecommunications equipment or participating in a joint venture. Invoicing must be processed electronically through WAWF, and accelerated payments to small business subcontractors are mandated. No pricing details are disclosed in the solicitation, and contract type remains unspecified, but fixed-price terms are implied through referenced clauses.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334290
New
Federal
Domestic Manufacturing and Assembly CoordinationThe contract requires the final U.S.-based integration and assembly of a surgical light, HD camera, and remote control system to comply with domestic manufacturing standards, ensuring all components are assembled within the United States to meet federal sourcing and production requirements. The work is specifically centered on combining these critical medical devices into a fully functional, compliant system suitable for use in healthcare environments, with the final assembly to be conducted at the designated performance location in West Roxbury, Massachusetts, 02132. This subcontract opportunity is issued by the Department of Veterans Affairs through the 241-NETWORK Contract Office 01, with a response deadline of August 15, 2026, at 8:30 PM Eastern Time. The NAICS code 334290 categorizes the effort under other electronic equipment manufacturing, indicating the technical nature of the assembly process and the need for expertise in medical-grade electronics integration. While no set-aside designation is specified, the requirement clearly prioritizes domestic production, making it essential for bidders to demonstrate capable facilities, workforce, and supply chain alignment within the United States to successfully fulfill the contract obligations.
241-NETWORK Contract Office 01 (36C241)

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334290
New
Federal
Remote Control System DevelopmentThe contract seeks the design and supply of a remote control system tailored for non-contact adjustment of surgical light settings, including focus, intensity, and positioning, to enhance precision and hygiene in operating room environments. The system must be engineered for seamless integration with existing surgical lighting infrastructure, ensuring reliability, responsiveness, and compatibility with sterile procedural requirements. Development must adhere to medical device standards and prioritize user ergonomics, electromagnetic compatibility, and fail-safe operation under high-stakes clinical conditions. The contract is classified as a subcontract under NAICS code 334290, targeting advanced medical equipment manufacturing, and is administered by the Department of Veterans Affairs through the 241-NETWORK Contract Office 01. Proposals are due by August 15, 2026, with performance expected to take place in West Roxbury, Massachusetts, at a ZIP code of 02132. While no set-aside provisions are specified, submission must align with federal procurement regulations governing medical technology suppliers, and bidders are expected to demonstrate technical feasibility, proven experience in clinical device development, and a clear path to scalable production.
241-NETWORK Contract Office 01 (36C241)

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334290
New
Federal
6515--Removal and Installation of Nurse call System
Solicitation # 36C26226Q1156
The U.S. Department of Veterans Affairs, through the Network Contract Office 22, is soliciting quotes for the removal of outdated equipment and installation of a new Nurse Call System at the Jerry L. Pettis Memorial Veterans Hospital in Loma Linda, California. This combined synopsis-solicitation, issued under FAR Part 12 for commercial products and services, is unrestricted and not set aside for small businesses, though the NAICS code 334290 applies with an 800-employee size standard. The system is critical for patient safety, enabling seamless communication between patients in rooms and bathrooms and nursing staff via a centralized station. All quotes must align with the Price Schedule in the solicitation and meet the requirements outlined in the attached addendum, including submission of a statement confirming acceptance of all terms and conditions without modification—or a detailed list of exceptions with rationale. Offers are due by August 14, 2026, and must be submitted to the Contracting Officer as specified. Award will be determined based on FAR 52.212-2 evaluation criteria. The point of contact for inquiries is Edgar Alvizar, Contracting Officer, reachable via email at Edgar.Alvizar@va.gov or phone at 562-754-5832. Full solicitation details, provisions, and clauses are accessible online at www.acquisition.gov.
262-NETWORK Contract Office 22 (36C262)

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334290
New
Federal
TRANSMITTER,INFRARE
Solicitation # N0010426QXB63
This contract pertains to the procurement of the TRANSMITTER, INFRARED for the 5"/54-Caliber Gun Mount MK45, with requirements strictly defined by multiple drawings, primarily drawing 5181698 and associated technical documentation. The supplier must comply with comprehensive quality and manufacturing standards, including ISO 9001, MIL-STD-130 for marking, MIL-STD-973 for configuration control with specific tailoring, and adherence to numerous military and industry specifications such as MIL-STD-202, MIL-STD-883, MIL-PRF-39003, and others. The item must be sourced from a Government Qualified Products List (QPL) supplier, and 100% production testing is mandatory, with results subject to approval by the DCMC-QAR before shipment. All deliverables must be shipped FOB Origin, packaged per MIL-STD-2073, and accompanied by approved test procedures and reports. The solicitation mandates a Firm-Fixed Price quotation with minimum 90-day expiration, requiring detailed cost breakdowns, lead times, CAGE codes, and proof of authorized distributor status if not the manufacturer, confirmed via official OEM correspondence. Electronic submissions must be sent to stephanie.r.perez7.civ@us.navy.mil, and the evaluation will prioritize price, past performance, and supplier risk under DFARS 252.204-7024. All offerors must comply with Buy American provisions, Small Business Subcontracting Plan mandates, Security Prohibitions, and mandatory use of Workflow Pro (WFP) Assist Module. The Government retains inspection rights, requires records retention for 365 days after delivery, and enforces strict configuration control with prior authorization for any engineering changes. Only authorized distributors may be considered, and all technical inquiries must follow prescribed submission formats and channels. The response deadline is July 24, 2026, and award is contingent on bilateral acceptance.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 334290
New
Federal
CONVERTER, CARTRIDG
Solicitation # N0010426QYADS
This contract pertains to the repair and quality assurance of the CONVERTER, CARTRIDG, identified by Cage Code 73030 and Reference Number NV822189-3, with alternative part numbers SV781971-1 and NV822189-1 also recognized. The work must comply with MIL-STD-130 Rev N for marking and adhere strictly to the original manufacturer’s technical specifications, drawings, and approved repair procedures. All repairs must be completed within a defined Repair Turnaround Time, measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system, and final acceptance by the Government is mandatory. The contractor must maintain a specified monthly throughput capacity and is bound by an Induction Expiration Date of 365 days after contract award, beyond which repairs require written bilateral approval. The item must be mercury-free and free from contamination, with any intentional use of mercury requiring explicit prior written approval and the inclusion of a warning plate; contamination will result in rejection. All subcontractors are bound by the same mercury and quality requirements. The contract mandates compliance with Buy American provisions, Small Business Set-Aside status, and limitations on pass-through charges, with a certified small business size standard of 800 employees. Quality assurance responsibilities rest entirely with the contractor, who must implement a comprehensive inspection and testing program aligned with original manufacturer requirements, maintain complete records for 365 days after final delivery, and permit Government oversight at any time. Packaging must follow MIL-STD-2073, and all documents provided by the Government are issued via electronic means, with acceptance of the proposal constituting agreement. The North American Industry Classification System code is 334290, and distribution of technical documents is restricted according to specified codes, with NOFORN and Official Use Only documents requiring formal request and certification. Only authorized distributors of the original manufacturer may submit proposals, and proof of authorization must accompany offers. All contractual actions are managed through NAVSUP WSS, with point of contact information and official ordering channels clearly defined.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 334290
New
Federal
58--COMPUTER,DIGITAL DA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA72
The contract solicitation NSN 0R-5895-016740122-E7 under solicitation number N0038326QMA72 seeks five units of a digital computer system designated for repair or modification, with delivery terms specified as FOB origin. The request, posted on July 14, 2026, requires responses by August 31, 2026, and is categorized as a presolicitation, indicating it is an early-stage notice seeking industry input rather than a formal bid opportunity. The item is procured by the Navy Supply Systems Command Weapon Systems Support, operating under the Department of Defense, with the office located in Philadelphia, Pennsylvania. The place of performance is not specified, and no set-aside status or NAICS code is provided. Primary point of contact for inquiries is Ethan T. Stein, reachable via email or phone at the Philadelphia office, serving as the designated representative for this procurement.
Navsup Weapon Systems Support

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 334290
New
Federal
Hirsch Velocity Access Badging System
Solicitation # FA940126Q0032
The contract is for the procurement of Hirsch Velocity access badging software licensing, combined with hardware installation and ongoing service and maintenance, covering a base year and four additional option years. This procurement is structured to ensure continuous operation and support of the access control system over a five-year period, with the option to extend beyond the initial term. The system is critical for secure facility access control and must be deployed with compatible hardware and reliable technical support throughout its lifecycle. The solicitation number is FA940126Q0032, posted on July 31, 2026, with responses due by August 10, 2026. It is a Small Business Set Aside under the NAICS code 334290 for other electronic component manufacturing, indicating that only small businesses are eligible to bid. The contract is administered by the Department of Defense through the Office of FA9401 377 Msg Pk located at Kirtland Air Force Base in New Mexico. The primary point of contact is Anna Hartkopp, with Julia P. Kirby as the secondary contact for inquiries. The place of performance is also at Kirtland Air Force Base, New Mexico.
FA9401 377 Msg Pk

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334290
New
SLED
RF-Shielded Anechoic Chamber and Far-Field Antenna Measurement Positioner System (2027-UWMSN-01416-RFB).
Solicitation # 2027-UWMSN-01416-RFB
The University of Wisconsin-Madison is soliciting bids for the procurement of an RF-shielded anechoic chamber and a far-field antenna measurement positioner system under solicitation number 2027-UWMSN-01416-RFB. The bid must be submitted online through the designated portal at https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=UWisconsin, with all inquiries directed exclusively to Eric Thompson at eric.thompson@wisc.edu. The solicitation was posted on July 31, 2026, and responses are due by 2:00 PM on August 14, 2026. The equipment will be used for advanced antenna testing and electromagnetic compatibility measurements, requiring precise shielding and positioning capabilities to ensure accurate far-field data collection. The contract is managed under the state and local government (SLED) category, with performance expected to occur in Wisconsin. The point of contact listed is Beth Battista, who serves as the primary liaison for this procurement.
UW-Madison

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 334290
New
DIBBS
Manufacturing of Signal Distribution Radio PanelsThe contract is for the full-scale manufacturing and delivery of Signal Distribution Radio Panels under a five-year recurring delivery order arrangement, with annual quantities ranging from 30 to 90 units. This subcontract is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, as defined by FAR 19.5, ensuring eligibility and participation are restricted to qualified small business entities. The work falls under the NAICS code 334290, which covers other electronic component manufacturing, indicating specialized production of complex electronic systems. The contract is managed by the ASC Commodities Division within the Department of Defense, with a solicitation posted on July 30, 2026, and responses due by August 19, 2026. Delivery performance is expected to span the full contract term, with no specific location designated for performance, suggesting potential flexibility in production and logistics execution across the contractor’s operational footprint.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 18 days
View Details
NAICS: 334290
New
DIBBS
First Article Testing (FAT) for Signal Distribution PanelThe contract requires the performance and submission of a First Article Test (FAT) report for the Signal Distribution Radio Panel, ensuring full compliance with the DI-NDTI-80809B format. This includes providing detailed documentation, material certifications, and verification that all components and processes meet specified technical and quality standards. The FAT must demonstrate that the production method can consistently produce items conforming to the required design and performance criteria before full-scale manufacturing proceeds. The contract is a small business set-aside under the SBA Total Small Business Set-Aside program, classified under NAICS code 334290, and issued by the ASC COMMODITIES DIVISION within the Department of Defense. The response deadline is August 19, 2026, with the solicitation posted on July 30, 2026. The place of performance and point of contact details are not specified, but the contract must be accessed and responded to via the provided DIBBS link. All submissions must be complete and accurately formatted to meet the stringent requirements outlined in the referenced military specification.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 18 days
View Details
NAICS: 334290
New
DIBBS
Supply of Sensing Element, FIR (NSN 6340014712598)The contract is for the procurement and delivery of 45 units of an infrared sensing element identified by NSN 6340014712598, manufactured to meet military specifications. All units must be shipped FOB origin with a strict delivery timeline of no more than 10 days following the issuance of the order, with the final destination being Robins AFB, Georgia, at zip code 31098-1887. The procurement falls under the NAICS code 334290, indicating it pertains to other electronic component manufacturing, and is classified as a subcontract under the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and the official reference can be accessed via the DIBBS platform. There is no set-aside designation specified, and no point of contact details are provided in the available data.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details