Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from Department Of Energy was posted on January 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Cooling Plates

Closed
RFP377485Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332710
New
DIBBS
Supply of Metal Tube Assemblies (NSN 4710016532686)This subcontract with the DLA Weapons Support Fluid Handling Division involves the manufacture or procurement of eight metal tube assemblies under NSN 4710016532686. The contractor is responsible for utilizing metal fabrication and quality assurance testing equipment to deliver the completed units to Tinker AFB. Strict adherence to quality and documentation standards is required, specifically performing sampling and inspection according to MIL-STD-1916 or ASQ H1331 Table 1. Additionally, the provider must ensure all supply chain traceability documentation meets the requirements established in August 2016.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

20 minutes ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Manufacturing of Sleeve Bushings (NSN 5365-01-622-5565)This subcontract involves the precision CNC machining of 12 sleeve bushings under NSN 5365-01-622-5565 for the Department of Defense, specifically the DLA Weapons Support ASC. The selected manufacturer must execute a First Article Test within 90 days and ensure all deliverables comply with MIL-STD-129 and MIL-STD-2073-1E standards. Final delivery of the finished units is required at the DLA Distribution Depot in Hill, Utah. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification, be part of the US/Canada Joint Certification Program, and maintain CMMC Level 2 compliance. The project falls under NAICS code 332710, with a response deadline of November 5, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

20 minutes ago

DEADLINE

in 8 days
NAICS: 332710
New
DIBBS
Precision Machining/Fabrication of Vehicular Component BracketThis subcontract involves the precision machining and fabrication of one Vehicular Component Bracket, identified by NSN 2590-01-674-1574, for the DLA Weapons Support Land Supply Chain. The selected provider must utilize CNC milling or turning to manufacture the bracket according to the specific dimensions and tolerances outlined in the RA001 technical requirements. To be eligible, contractors must hold ISO 9001:2015, CMMC Level 2, and US/Canada Joint Certification Program certifications. The project falls under NAICS code 332710 and requires the delivery of one finished component. Responses are due by November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

20 minutes ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Manufacturing of Brake Disc (NSN 2530-01-713-9297)This subcontract involves the manufacture of one high-precision brake disc, identified by NSN 2530-01-713-9297 and Part Number 627-8476-003, for the DLA Weapons Support Land Supply Chain. The project requires precision machining and grinding performed to Oshkosh Aerotech specifications using high-tolerance CNC machining centers. To qualify, the provider must obtain engineering source approval from the Government Design Control Activity. The contract is categorized under NAICS code 332710 and mandates strict adherence to NIST SP 800-171 and DFARS 252.204-7012 cybersecurity and data protection standards. Performance will take place in Santa Rita, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

20 minutes ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Manufacture and Supply of Shaft Sleeves (NSN 3950-01-137-0937)This subcontract involves the manufacture and supply of 32 precision-machined shaft sleeves, identified by NSN 3950-01-137-0937, for Garner-Denver hoist models. The components are produced for prime contractors supporting DLA Troop Support contracts under NAICS code 332710. Performance will take place in New Cumberland, Pennsylvania, with the final delivery of all units handled as FOB Origin. The contractor must adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129. Additionally, the agreement requires full compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regulations to ensure all legal and security requirements for Department of Defense procurement are met.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

20 minutes ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Precision Component Manufacturer for Jack KitsThis subcontract involves the precision manufacture of individual components, including seals, valves, pins, and housings, specifically for NSN 1730-01-206-1707. The selected manufacturer will utilize CNC machining, casting, or molding to produce parts that adhere to Critical Application Item standards and Columbus Jack Corp P/N 1589 technical data. All finished components must be delivered to a prime integrator along with required certificates of conformance to support DLA Troop Support supply contracts. Managed under NAICS code 332710 for the Department of Defense, the work is to be performed in New Cumberland. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

20 minutes ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Specialized Component Supply for Retractor AssemblyThis subcontract involves the supply of precision machined components, springs, or fasteners for prime contractors supporting Department of Defense DLA supply contracts. The scope of work specifically requires the manufacture of individual piece numbers for part number 556AS164-3, adhering to the specifications outlined in TDP Rev A Gen 1. Deliverables include either individual machined parts or complete hardware kits, with a strict requirement for material certifications and mill test reports for all metals used. The contract is managed under NAICS code 332710 and mandates full compliance with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 9, 2026, for this specialized component supply effort related to retractor assemblies.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

20 minutes ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Fabrication of Metal Tube Assembly (NSN 4710-01-651-8603)This subcontract involves the fabrication and supply of one custom metal tube assembly, identified by NSN 4710-01-651-8603 and part number LS1121349, for the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The scope of work requires precision machining, bending, and welding of metal tubing, necessitating the use of CNC tube benders and TIG/MIG welding equipment. Performance will take place in Ft Carson, Colorado. The contractor must strictly adhere to the Berry Amendment and the DLA Master List of Technical and Quality Requirements RA001. This opportunity falls under NAICS code 332710 and was posted on October 28, 2026, with a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

20 minutes ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Precision Fabrication of Wing Fold Jury GageThis subcontract involves the precision machining and fabrication of a Wing Fold Jury Gage, specifically designed to meet Northrop Grumman part number 123GT10191 specifications. The project requires the use of CNC milling, turning, and CMM measurement to ensure proper calibration and certification. The final deliverable is one calibrated gage that adheres to all DLA Technical and Quality Requirements. The work is being performed for the Department of Defense via the DLA Receiving Officer at Naval Base Coronado in San Diego. To be eligible, the contractor must hold ISO 9001 or AS9100 certification. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, falling under NAICS code 332710.
DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

20 minutes ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Manufacturer of Specialized Metal Bar (P/N 13056447)This subcontract involves the fabrication and supply of specialized metal bars, specifically part number 13056447, to support prime contractors fulfilling Defense Logistics Agency Troop Support contracts. The manufacturing process must strictly avoid additive manufacturing and adhere to several regulatory standards, including the Buy American Act, the Berry Amendment, MIL-STD-2073-1E, and MIL-STD-129. Finished products are to be delivered on an FOB Origin basis. To be eligible, providers must maintain ISO 9001:2015 certification and CMMC Level 2 certification verified by a C3PAO. Additionally, contractors must hold ITAR and EAR export control certifications. This opportunity falls under NAICS code 332710 and is managed through the Department of Defense.
Defense Logistics Agency

POSTED

20 minutes ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Fuel Injector Holder ManufacturerThis subcontract involves the manufacture of four precision-machined fuel injector holders for prime contractors supporting the Department of Defense under the Construction and Equipment MRO SVC I agency. All parts must be fabricated according to NSN 4930-01-552-0232 specifications using precision CNC machining, with a strict prohibition on the use of additive manufacturing. The contractor is required to maintain mercury-free processes and ensure full compliance with DFARS 252.204-7012 and MIL-STD-2073-1E standards. Performance of the contract will take place in Tracy, California, under NAICS code 332710.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

20 minutes ago

DEADLINE

in 12 days
NAICS: 332710
New
DIBBS
Manufacture of Right Side Travel C (NSN 5411-01-496-2105)This subcontract involves the manufacture of 18 Right Side Travel C units, identified by NSN 5411-01-496-2105, for prime contractors supporting DLA Troop Support supply contracts. The work is performed under NAICS code 332710 and requires strict adherence to Drawing NR 81337 5-13-6416, TDP Rev A Gen 1, and technical specifications MIL-PRF-20696G, MIL-DTL-43375F, and CID A-A-55126C. The project is managed through the Department of Defense and will be performed in Texarkana, Texas. To be eligible, the provider must maintain compliance with NIST SP 800-171 and DFARS 252.204-7012 cybersecurity standards. All delivered units must undergo inspection and acceptance to fulfill the contract requirements.
RED RIVER RECEIVING BLDG

POSTED

20 minutes ago

DEADLINE

in 12 days

AI Contract Overview

Show more

The contract titled "Cooling Plates" is a solicitation issued by Fermilab, a DOE Contractor located in Batavia, Illinois. The solicitation number is RFP377485, with the posting date of January 6, 2026, and a response deadline set for January 26, 2026, at 9:00 PM. The contract falls under the NAICS code 332710, which pertains to metal heat treating services, indicating the nature of the work involved likely concerns manufacturing or processing cooling plates. The point of contact for this solicitation is Sharon Duchaj, who can be reached via email or phone. The place of performance is also Batavia, Illinois, consistent with the agency's location. There is no specified set-aside type for this opportunity. Interested parties can review further details or respond to the solicitation through the SAM.gov workspace link provided. This contract opportunity is open to organizations capable of supplying or producing cooling plates in line with the specified requirements.

General Info

Fermilab seeks suppliers for metal heat-treated cooling plates; respond by January 26, 2026.

Agency

Department Of Energy → Fermilab - DOE Contractor

NAICS

332710 - Machine Shops

Place of Performance

Batavia, IL, 60510, USA

Set-Aside

NONE

Documents

2

RFP+377485+-+Commercial+Package.zip

ZIP

RFP+377485+-+Technical+Package.zip

ZIP

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Fermilab - DOE Contractor
Contacts1 person available
OfficeBatavia, IL, 60510, USA
Organization / AgencyDepartment Of Energy → Fermilab - DOE Contractor
Office AddressBatavia, IL, 60510, USA
Contacts
Sharon Duchaj
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

Cooling Plates

More opportunities from Department Of Energy → Fermilab - DOE Contractor

Same awarding agency

NAICS: 332323
New
Federal
Bar Grating and Saddle Clips
Solicitation # 388000kmb
Fermi Forward Discovery Group, LLC is soliciting firm-fixed price proposals under RFP 388000kmb for the fabrication and delivery of hot-dipped galvanized carbon steel bar grating and associated saddle clips. These materials are required for the VD Cryostat Roof Decking as part of the LBNF/DUNE project. The scope includes various sizes of bar grating with bearing bars measuring 1.5 inches tall by 3/16 inches thick and 19-W-4 spacing, along with Type W44 and W10 saddle clips. Technical requirements specify a minimum live load of 100 PSF, a minimum concentrated load of 1000 LB, and a maximum deflection of 0.25 inches. Proposals must be submitted via email to Karen Berger by 5:00 PM CT on November 6, 2026. A complete submission package requires a proposal including lead times, a completed first page of the RFP, the Subcontractor Annual Representations and Certifications (SARC), and the PROC-FRM-466 Proposal Certifications. Award will be based on the Lowest Price Technically Acceptable (LPTA) selection process, with a strong emphasis on strict adherence to technical specifications and FFDG terms and conditions to avoid disqualification. Delivery is required FOB Destination to the Dakota Warehouse in Rapid City, South Dakota. All items must be bundled and packaged to comply with the Ross Shaft Load Envelopes and Shipping Expectation guidelines to ensure compatibility with warehouse handling capabilities. Post-award deliverables include a detailed logistics and shipping plan and all applicable operator manuals. The contract is subject to various federal regulations, including Buy American requirements and FAR anti-discrimination laws.
Ornamental and Architectural Metal Work Manufacturing

POSTED

5 days ago

DEADLINE

in 9 days
View Details
NAICS: 332911
New
Federal
PIP-II CM 2K Pressure Safety Device - Rupture Disks
Solicitation # 387878-DSF
Fermi Forward Discovery Group, LLC, operating the Fermi National Accelerator Laboratory (Fermilab), is soliciting firm-fixed price proposals under solicitation 387878-DSF for the procurement of thirty-three cryogenic non-reclosable rupture disk cartridges. These components are required for the Proton Improvement Plan II (PIP-II) Cryomodule relief system and must be designed for sub-atmospheric cryogenic conditions of approximately 2 K and 30 mbar absolute pressure. The requirement includes disks with set pressures of 3.1 barg and 1.75 barg, constructed from Inconel, and equipped with normally closed burst alert sensors on the outlet. All disks must be ASME Section VIII Code NB/UD stamped and meet a helium leak rate specification of 10^-8 atm-cc/sec. Proposals must be submitted via email to Seth Fryar by October 30, 2026, at 2:00 PM Central Time. Submissions must include a technical proposal demonstrating merit and five years of relevant experience, a delivery schedule, and a price proposal using the provided Exhibit F pricing sheet. Award will be granted to the lowest evaluated proposal that meets all technical and past performance acceptability standards. The contract requires strict adherence to various federal regulations, including the Buy American Act, FAR anti-discrimination laws, and DOE site access and safety requirements. Delivery is FOB Destination to Batavia, Illinois, where Fermilab will conduct visual, mechanical, and certification inspections within two weeks of receipt.
Industrial Valve Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
Federal
Enclosed Electronics Racks
Solicitation # RFP387713
Fermilab, a Department of Energy contractor, has issued solicitation RFP387713 for the procurement of enclosed electronics racks. This opportunity is categorized under NAICS code 332999 and is managed by the office located in Batavia, Illinois, where the work is also expected to be performed. Interested parties must submit their responses by the deadline of November 10, 2026. The primary point of contact for this requirement is Sharon Duchaj, who can be reached via email or phone for further inquiries regarding the submission process.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

5 days ago

DEADLINE

in 13 days
View Details
NAICS: 236220
New
Federal
Wilson Hall Floor 16 Electric and Elevator Machine Rooms Fire Rating and Mechanical Upgrade
Solicitation # 385515GMK
Fermilab, a Department of Energy contractor, is seeking proposals for fire rating and mechanical upgrades to the electric and elevator machine rooms located on the 16th floor of Wilson Hall in Batavia, Illinois. This solicitation, identified by number 385515GMK, is designated as a total set-aside for small businesses under NAICS code 236220. Interested parties should note that a site visit is scheduled for November 4, 2026, at 8:30 am CST. The deadline for the submission of proposals is November 17, 2026, at 3:00 pm CST. Primary coordination for this project is handled by Gina M. Kern.
Commercial and Institutional Building Construction

POSTED

6 days ago

DEADLINE

in 20 days
View Details
NAICS: 423430
Federal
Leica Absolute Tracker and Accessories SupplierThis subcontract involves the supply of high-precision laser tracking hardware to prime contractors for projects at Fermilab. The required equipment includes one Leica Absolute Tracker ATS800, one 3-Point Reflector Support, and both MAT181 and MAT182 Scanner Sphere Kits, all of which must be delivered to the facility in Batavia. The supplier must ensure full compliance with the Buy American Act and provide the necessary Export Classification Control Number or EAR99 status. This opportunity is categorized under NAICS code 423430 and is managed through the Department of Energy via Fermilab.
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 332312
Federal
Industrial Bar Grating SupplierThis subcontract involves the fabrication and delivery of 540 precision-sized industrial bar grating units for Department of Energy facility projects managed by Fermilab. The required dimensions for the metal grating range from 62.875 to 78.75 inches, with final delivery to be made to the designated construction site in Rapid City. The supplier must ensure strict compliance with the Buy American Act and provide all necessary export control documentation, including ECCN, EAR99, and HTS codes. This procurement falls under NAICS code 332312, with a response deadline set for November 6, 2026.
Fabricated Structural Metal Manufacturing

POSTED

7 days ago

DEADLINE

in 9 days
View Details
NAICS: 334516
Federal
Leica Absolute Tracker ATS800 and Accessories
Solicitation # 387869swk
Fermi Forward Discovery Group, LLC (FFDG) is soliciting firm-fixed price proposals for the procurement of a Leica Absolute Tracker ATS800 and associated accessories for the Fermi National Accelerator Laboratory (Fermilab) in Batavia, Illinois. The required equipment package includes the ATS800 tracker, a 3-point reflector support, scanner sphere kits in 1.5 and 0.5 inch sizes, a portable precision carbon tripod with transportation case, a 35-degree wall mount fixture, and multiple battery sets, wireless Bluetooth remote controls, and leveling units. Delivery is required F.O.B. Fermilab, and all freight charges must be included in the quotation. The award will be based on a best value source selection, defined as the lowest price among technically acceptable offerors who are deemed responsible by FFDG. Proposals are due by 5:00 PM Central on November 4, 2026. Submission packages must include a completed RFP page, the SARC Subcontractor Annual Reps and Certs form, and the PROC-FRM-466 Proposal Certifications. The contract is subject to various Federal Acquisition Regulation (FAR) clauses, including those regarding rights in data, combating trafficking in persons, and Buy American Act compliance, with specific domestic preference for construction materials.
Analytical Laboratory Instrument Manufacturing

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 332710
Federal
Cavity
Solicitation # RFP384239
The Cavity solicitation, identified by RFP384239, is issued by the Department of Energy through its contractor, Fermilab. This procurement opportunity falls under NAICS code 332710 and is centered in Batavia, Illinois, which serves as both the office location and the primary place of performance. Interested parties must submit their responses by the deadline of November 4, 2026, at 7:00 PM. The primary point of contact for this solicitation is Sharon Duchaj, who can be reached via email or phone for further inquiries regarding the requirements of the contract.
Machine Shops

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 484220
Federal
Specialized Transport of High-Purity ComponentsThis subcontract, titled Specialized Transport of High-Purity Components, involves the delivery of sensitive, high-purity metal components for prime contractors working on Fermilab PIP-II projects. The scope of work requires the secure transport of high-value materials using specialized packaging designed to prevent surface contamination, ensuring all components are delivered safely to the destination site in accordance with Section D and Section J Packaging and Marking specifications. Managed by the Department of Energy through Fermilab, the opportunity falls under NAICS code 484220. The solicitation was posted on October 19, 2026, with a response deadline set for November 10, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

9 days ago

DEADLINE

in 13 days
View Details
NAICS: 541380
Federal
Material Certification and Quality Testing ServicesThis subcontract for Material Certification and Quality Testing Services involves providing independent testing and certification of Niobium and Niobium-Alloy materials for prime contractors on Fermilab PIP-II projects. The scope of work includes performing chemical analysis to verify metal purity and conducting electrical resistivity testing to determine RRR values through the use of mass spectrometers and high-precision resistivity tools. The selected provider must hold ISO/IEC 17025 or an equivalent laboratory accreditation to ensure quality standards. Key deliverables for this engagement include the provision of certified test reports and formal material certification documents. This opportunity is associated with NAICS code 541380 and is managed under the Department of Energy via Fermilab.
Testing Laboratories and Services

POSTED

9 days ago

DEADLINE

in 13 days
View Details
NAICS: 331491
Federal
High-Purity Niobium Component FabricationThis subcontract involves the fabrication of high-purity Niobium and Niobium-Alloy components intended for SRF cavities as part of the Fermilab PIP-II projects. The selected provider will be responsible for the rolling, drawing, and extruding of nonferrous metals to achieve High RRR Grade specifications, utilizing specialized high-temperature or vacuum processing equipment to meet strict technical requirements. The contract is managed under the Department of Energy via Fermilab and requires strict adherence to the Buy American Act and all applicable Export/Import controls. Interested parties must submit their responses by November 10, 2026, to provide these certified components to the prime contractors.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

9 days ago

DEADLINE

in 13 days
View Details
NAICS: 331491
Federal
PIP-II Niobium Sheets, Rings, and Disks
Solicitation # 385634-DSF
Fermi National Accelerator Laboratory (FNAL), through the Fermi Forward Discovery Group, LLC, is soliciting firm-fixed price proposals for the manufacturing, testing, certification, and delivery of high-purity Niobium and Niobium-Alloy components. These materials, which include RRR300 Niobium sheets, Nb55Ti rings and disks, and forged Niobium rings, are critical for superconducting radio-frequency cavities used in the Proton Improvement Plan II (PIP-II) project. All deliverables must adhere to strict technical specifications, including a Residual Resistivity Ratio (RRR) value greater than 300 and compliance with ASTM B-391, B-393, and E-8/E-384 standards. Materials must be delivered FOB Destination to Batavia, Illinois, with specific requirements for non-abrasive packaging and permanent product inscription for traceability. Proposals are due by November 10, 2026, and must be submitted in two separate volumes: a technical proposal and a business/price proposal. Evaluation is based on a best-value trade-off where technical merit, quality assurance plans, and past experience are significantly more important than price. Offerors must provide a minimum of three relevant examples of similar work from the past five years and a detailed project schedule. Mandatory submissions include the SARC (PROC-FRM-100) and Proposal Certifications (PROC-FRM-466) forms. The contract incorporates various Federal Acquisition Regulation (FAR) and Department of Energy Acquisition Regulation (DEAR) clauses, including strict prohibitions against racially discriminatory DEI activities under FAR 52.222-90 and compliance with the Buy American Act.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

9 days ago

DEADLINE

in 13 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332710
Closed
Federal
TEST SET,COUNTERMEA
Solicitation # N0038326QAA27
Navsup Weapon Systems Support

POSTED

10 months ago

CLOSED

9 months ago
View Details
NAICS: 332710
Closed
Federal
53--PACKING ASSEMBLY
Solicitation # SPE7L126T7776
DLA Land And Maritime

POSTED

10 months ago

CLOSED

10 months ago
View Details
NAICS: 332710
Closed
Federal
49--ADAPTER SET,AIRCRAF
Solicitation # SPE4A526T5966
DLA Aviation

POSTED

10 months ago

CLOSED

10 months ago
View Details
NAICS: 332710
Closed
Federal
STUFFING TUBE
Solicitation # N0040626QS067
Navsup Flt Logistics Ctr Puget Sound

POSTED

10 months ago

CLOSED

10 months ago
View Details
NAICS: 332710
Awarded
Federal
PANEL,ELECTRICAL
Solicitation # SPRPA125QEV24
Pa DLA Aviation At Philadelphia

POSTED

10 months ago

CLOSED

10 months ago
View Details
NAICS: 332710
Closed
Federal
Helium Jacket Assembly
Solicitation # RFP376925
Fermilab - DOE Contractor

POSTED

10 months ago

CLOSED

9 months ago
View Details
NAICS: 332710
Closed
Federal
HD Coldboxes Fabrication
Solicitation # 375613swk
Fermilab - DOE Contractor

POSTED

10 months ago

CLOSED

10 months ago
View Details
NAICS: 332710
Closed
Federal
Custom Microphone Mount
Solicitation # N6426726Q4003
Naval Surface Warfare Center

POSTED

11 months ago

CLOSED

10 months ago
View Details
NAICS: 332710
Awarded
Federal
49--CIRCUIT CARD,D TO A
Solicitation # SPE4A526T2785
DLA Aviation

POSTED

11 months ago

DEADLINE

N/A
View Details
NAICS: 332710
Closed
Federal
PANEL, FIRE ALRM
Solicitation # N0010426QBG22
Navsup Weapon Systems Support Mech

POSTED

11 months ago

CLOSED

10 months ago
View Details
NAICS: 332710
Awarded
Federal
Small Business Set Aside for Primary Air Supply Pumps (PASP) Build Kits per attachments. Request Access to the drawings through SAM. Provide your Cage Code when requesting access in SAM.
Solicitation # N61331-26-Q-KS10
Naval Surface Warfare Center

POSTED

11 months ago

CLOSED

10 months ago
View Details
NAICS: 332710
Closed
Federal
WIRE EDM
Solicitation # W911S226U2323
W6QM Micc-Ft Drum

POSTED

11 months ago

CLOSED

10 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS