Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Subcontract opportunity from North Carolina was posted on September 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Corrugated Steel Pipe (CSP) Supply

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312
New
DIBBS
Mounting Bracket Supply (NSN 5340-01-536-0027)This subcontract involves the manufacture or procurement of 45 mounting brackets under NSN 5340-01-536-0027 to support prime contractors for the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet specific technical specifications, including commercial packaging standards per ASTM D3951 and marking and labeling requirements according to MIL-STD-129. The agreement requires strict compliance with the Buy American Act DFARS 252.225-7001. All completed units are to be delivered to DLA Distribution Barstow in California. The project falls under NAICS code 332312 and is managed through the Department of Defense.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Manufacturing of Electrical Equipment Mounting BasesThis subcontract involves the manufacturing of two electrical equipment mounting bases for the Department of Defense, specifically supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for fabricating components according to NSN 5975014546978 specifications, while ensuring strict adherence to RA001 technical requirements and RQ017 marking standards. Quality assurance must be conducted through sampling in accordance with MIL-STD-1916 or ASQ H1331. The project requires the contractor to maintain high security and regulatory standards, including a CMMC Level 2 self-assessment and full compliance with DFARS 252.204-7012. Performance of the contract will take place in Tracy, California, under NAICS code 332312. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
NAICS: 332312
New
DIBBS
Fabrication of Vehicular Brush Guards / Solenoid Heat ShieldsThis subcontract involves the precision fabrication and assembly of 123 Vehicular Brush Guards and solenoid heat shields for prime contractors supporting DLA Weapons Support projects. The work requires manufacturing components to strict technical specifications using metal fabrication equipment, with a focus on quality control through inspection systems compliant with SAE AS9003 or ISO 9001. All parts must be marked according to MIL-STD-129 and delivered fully packaged. The project is managed under the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament, with performance located in New Cumberland. Eligible contractors must hold US/Canada Joint Certification Program approval. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332312.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Manufacturing of Flat Brackets (NSN 5342-01-029-5268)This subcontract involves the fabrication and supply of precision flat brackets, specifically Part Number 3024491, for prime contractors supporting the DLA Weapons Support ASC. The manufacturing process requires the use of CNC milling, punching, or stamping, with strict adherence to RQ017 for bare item marking and MIL-STD-105/ASQ Z1.4 for quality inspection. The final deliverable consists of two finished and packaged brackets to be delivered to DLA Distribution Cherry Point, North Carolina. To be eligible, the provider must maintain CMMC Level 2 certification and ensure full compliance with the Buy American Act. This opportunity falls under NAICS code 332312 and is managed by the Department of Defense. Interested parties must respond by November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
NAICS: 332312
New
DIBBS
Mounting Bracket SupplyThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the fabrication and delivery of 5,000 mounting brackets identified by NSN 5340012330177. The components must be produced using traditional manufacturing methods, as additive manufacturing is strictly prohibited. All deliverables must adhere to strict government specifications to support prime contractors on hardware procurements. The contract mandates full compliance with DFARS 252.204-7012 and NIST SP 800-171 DoD Assessment Requirements to ensure cybersecurity and data protection. Performance will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 16, 2026, for this procurement categorized under NAICS code 332312.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Supply of Machine Bolts (Critical Application)This subcontract involves the supply of 1,578 machine bolts under NSN 5306013600931 for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The components must be compatible with General Dynamics Land Systems part number 2000141 and Caterpillar Inc part number 6V-5217. Due to their designation as critical application items, the supplier must ensure strict adherence to all material grade and tolerance specifications. The contract is categorized under NAICS code 332312 and requires delivery of the units FOB Origin. Performance is associated with the location in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
NAICS: 332312
New
DIBBS
Foldover Arm Spring FabricationThis subcontract involves the fabrication of precision foldover arm springs for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work requires the production of 70 units and one First Article Test unit under NSN 1680-00-996-1181. All deliverables must comply with the DLA Master List of Technical and Quality Requirements, utilizing ASTM D3951 for packaging and MIL-STD-129 for labeling. To qualify, manufacturers must maintain SAE AS9003 or ISO 9001 quality systems and hold CMMC Level 2 and US/Canada Joint Certification Program certifications. The project is managed by the Department of Defense under NAICS code 332312, with performance located in New Cumberland. Responses are due by November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
NAICS: 332312
New
DIBBS
Helical Compression Spring FabricationThis subcontract involves the fabrication of two finished helical compression springs for prime contractors supporting the DLA Weapons Support Land Supply Chain. The manufacturer must produce the springs in accordance with the technical data package for NSN 5360-00-773-3051 and the DLA Master List of Technical and Quality Requirements RA001, utilizing precision spring coiling and heat treatment equipment. The project is categorized under NAICS code 332312 and requires strict adherence to the Buy American Act and the Berry Amendment. Performance will take place in Greensboro, North Carolina. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Annular Ball Bearing Supply (NSN 3110-00-089-1688)This subcontract involves the manufacture and supply of annular ball bearings, specifically NSN 3110-00-089-1688, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All delivered components must strictly adhere to ABEC No. 1 specifications and the DLA Master List of Technical and Quality Requirements to ensure operational standards are met. The contract mandates strict domestic sourcing compliance, requiring that components originating from the United States, its outlying areas, or Canada constitute more than 50 percent of the total cost. Performance for this requirement is centered in Anniston, and the supplier is responsible for providing all necessary technical and domestic sourcing certifications upon delivery.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
NAICS: 332312
New
DIBBS
Fabrication of Structural Vehicular Frame SectionsThis subcontract involves the fabrication of three structural frame sections for unmanned ground vehicles to support prime contractors under DLA Weapons Support contracts. The scope of work requires precision cutting, bending, and welding of structural metal in strict accordance with Teledyne FLIR P/N 4537280 specifications. The project is managed by the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. To ensure quality and security, the contractor must maintain full compliance with the DLA Master List technical requirements and DFARS cybersecurity standards. Performance of the contract will take place in New Cumberland.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Fabrication of Structural Vehicular Frame SectionsThis subcontract involves the fabrication of two structural vehicular frame sections, specifically part number 1028561-458, for prime contractors supporting DLA Weapons Support Land Supplier Operations. The scope of work includes cutting, bending, welding, and assembly utilizing CNC equipment, with all production adhering to OEM specifications and the DLA Master List of Technical and Quality Requirements. The project is managed under the Department of Defense and requires strict compliance with the Buy American Act and DFARS safeguarding regulations. Performance will take place in Tracy, California, under NAICS code 332312. Interested parties must respond by November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Vehicular Stowage Shelf FabricationThis subcontract involves the fabrication of three vehicular stowage shelves for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations. Manufacturing must strictly adhere to Basic Drawing NR 19200 13048707 Rev B and TDP Rev A Gen 1, with final inspections conducted according to MIL-STD-1916. Performance of the work will take place in New Cumberland. To be eligible, the contractor must maintain SAE AS9003 or ISO 9001 quality systems. Rigorous security and compliance standards are required, including CMMC Level 2 certification and participation in the US/Canada Joint Certification Program to ensure ITAR and EAR compliance. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

in 11 days

AI Contract Overview

Show more

This subcontract agreement involves the supply and delivery of dual 90-inch corrugated steel pipes for prime contractors working on Union County Parks and Recreation projects in North Carolina. The selected provider is responsible for sourcing or manufacturing materials that strictly adhere to the project standards and technical specifications outlined in Division 33, ensuring all piping meets the required quality and engineering benchmarks. The contract includes the management of logistics and the final delivery of the specified materials to the designated project site. This opportunity is categorized under NAICS code 332312 and is managed by the County of Union. Interested parties must submit their responses by the deadline of October 20, 2026.

General Info

Supply dual 90-inch corrugated steel pipes for Union County Parks and Recreation projects.

Agency

North Carolina → County of Union

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 2027-006.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

IFB 2027-006, Union County Cane Creek Park Culvert Replacement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNorth Carolina → County of Union
ContactsNo contacts available
OfficeN/A
Organization / AgencyNorth Carolina → County of Union
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supplies dual 90-inch corrugated steel pipes for prime contractors on Union County Parks & Recreation projects. Sources or manufactures 90-inch corrugated steel pipes meeting Division 33 specifications and manages delivery to the project site. Materials must comply with project standards defined in Division 33. Delivers the specified corrugated steel piping to the site.

More opportunities from North Carolina → County of Union

Same awarding agency

NAICS: 238320
SLED
Interior Finishes ContractorThe County of Union in North Carolina is seeking an Interior Finishes Contractor for a subcontract to provide painting, carpeting, and tiling services. The project covers 27,553 square feet across the Historic Post Office and West Franklin Street offices, with the primary goal of delivering completed walls and floors. A critical requirement for this contract is the ability to execute phased installations while the buildings remain occupied. Interested parties must submit their responses by November 18, 2026, at 4:00 PM.
Painting and Wall Covering Contractors

POSTED

22 days ago

DEADLINE

in 13 days
View Details
NAICS: 237310
SLED
Paving and Parking Lot ContractorThe County of Union in North Carolina is seeking a Paving and Parking Lot Contractor for a subcontracting opportunity to perform upgrades on facility projects. The selected contractor will work under prime contractors to execute patching, striping, and minor resurfacing of parking areas and driveways across a six-acre site. Proven experience in commercial parking lot maintenance is required to ensure the successful delivery of repaired and properly marked surfaces. This opportunity was posted on October 15, 2026, with a response deadline of November 18, 2026. The project falls under NAICS code 237310, focusing on highway, street, and bridge construction. Interested parties should refer to the official solicitation portal for submission guidelines and further details.
Highway, Street, and Bridge Construction

POSTED

22 days ago

DEADLINE

in 13 days
View Details
NAICS: 238170
SLED
Storefront and Glazing ContractorThe County of Union in North Carolina is seeking a Storefront and Glazing Contractor for a subcontracting opportunity to perform exterior improvements at the West Franklin Street facility. The selected contractor will work under prime contractors to replace or upgrade storefront glass, frames, and entry doors, ensuring the delivery of updated exterior storefronts. Qualified candidates must possess specific experience with commercial storefront systems. Interested parties should note that the solicitation was posted on October 15, 2026, with a response deadline of November 18, 2026. This project falls under NAICS code 238170.
Siding Contractors

POSTED

22 days ago

DEADLINE

in 13 days
View Details
NAICS: 238220
SLED
Commercial HVAC ContractorThis subcontract opportunity is for a Commercial HVAC Contractor to support prime contractors on adaptive reuse projects within Union County, North Carolina. The scope of work involves the installation and modification of HVAC systems, specifically updating units and ductwork to align with new room configurations in a 41,000 square foot commercial center to ensure fully climate-controlled interior spaces. Interested parties must possess a valid North Carolina Mechanical License to be eligible for the project. The solicitation was posted on October 15, 2026, and requires a response by the deadline of November 18, 2026.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

22 days ago

DEADLINE

in 13 days
View Details
NAICS: 238210
SLED
Commercial Electrical ContractorThe County of Union in North Carolina is seeking a Commercial Electrical Contractor for a subcontracting opportunity to install electrical systems, lighting, and power for facility projects. The selected contractor will work under prime contractors to perform wiring, lighting installation, and power distribution specifically for new office and conference room layouts, ensuring the delivery of certified electrical systems. Interested parties must possess a valid NC Electrical License to be eligible for this work. The solicitation was posted on October 15, 2026, and the deadline for responses is November 18, 2026, at 4:00 PM. This project falls under NAICS code 238210.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

22 days ago

DEADLINE

in 13 days
View Details
NAICS: 238220
SLED
Commercial Plumbing ContractorThe County of Union in North Carolina is seeking a Commercial Plumbing Contractor for a subcontract to install and update plumbing systems for prime contractors on various facility projects. The scope of work specifically includes performing rough-in and finish plumbing for new workrooms and restrooms located at the Historic Post Office and West Franklin sites. The selected contractor is responsible for delivering fully functional systems that comply with all applicable local codes. Qualified applicants must hold a valid North Carolina Plumbing License to be eligible for this opportunity. The solicitation was posted on October 15, 2026, and the deadline for responses is November 18, 2026, at 4:00 PM. This project falls under NAICS code 238220.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

22 days ago

DEADLINE

in 13 days
View Details
NAICS: 236220
SLED
Commercial Interior Fit-Out ContractorThe County of Union in North Carolina is seeking a Commercial Interior Fit-Out Contractor for a subcontract project to construct new interior office and support spaces for prime contractors. The scope of work includes framing and installing walls for a variety of areas, including office spaces, meeting rooms, conference rooms, restrooms, and workrooms, resulting in completed interior room partitions and layouts. Qualified bidders must hold a valid North Carolina state license and demonstrate the ability to execute phased installations to ensure minimal disruption to ongoing County operations. Interested parties must submit their responses by the deadline of November 18, 2026, at 4:00 PM.
Commercial and Institutional Building Construction

POSTED

22 days ago

DEADLINE

in 13 days
View Details
NAICS: 238910
SLED
Interior Demolition ContractorThis subcontract opportunity is for an interior demolition contractor to support prime contractors on Union County facility projects located in Monroe, North Carolina. The scope of work involves the removal of interior walls, ceilings, flooring, and fixtures across a 41,000 square foot commercial center and specific sections of a historic post office. The selected contractor must be capable of coordinating activities within occupied facilities and ensuring strict adherence to local debris disposal regulations to deliver sites that are fully cleared and ready for new construction. The project falls under NAICS code 238910 and is issued by the County of Union in North Carolina. Interested parties must submit their responses by the deadline of November 18, 2026, at 4:00 PM. This contract focuses on specialized demolition services to prepare government-owned commercial and historic properties for subsequent renovation and development.
Site Preparation Contractors

POSTED

22 days ago

DEADLINE

in 13 days
View Details
NAICS: 236220
SLED
RFQ 2027-016 Construction Manager at Risk Services, Union County Historic Post Office/West Franklin Street Renovations
Solicitation # 2027-016
Union County, North Carolina, is soliciting Statements of Qualifications (SOQs) for a Construction Manager at Risk (CMAR) to lead the renovations of the Union County Historic Post Office and the West Franklin Street facility. The project is divided into two phases: the adaptive reuse of a 41,000-square-foot commercial center on West Franklin Street and minor interior renovations of approximately 27,553 square feet at the Historic Post Office, which must remain operational during construction. The selected CMAR will collaborate with a separately contracted architectural and engineering firm, providing professional services across planning, design, preconstruction, and construction. The contract will be based on the AIA A133-2019 standard form, utilizing a Cost of the Work Plus a Fee with a Guaranteed Maximum Price payment structure. Qualified firms must be licensed in North Carolina and capable of providing 100 percent performance and payment bonds, as well as a builders risk insurance policy for the total cost of the work. Submissions are due electronically by 4:00 PM on November 18, 2026, and must adhere to a 50-page limit. Evaluation is based on a weighted analysis of the project team, CMAR experience, project management approach, and resource availability, with potential short-listed firms undergoing a secondary interview process. The procurement process emphasizes compliance with Federal Equal Employment Opportunity policies, E-Verify requirements, and Union County Small Business Outreach Guidelines.
Commercial and Institutional Building Construction

POSTED

22 days ago

DEADLINE

in 13 days
View Details
NAICS: 238210
SLED
Electrical System Identification and LabelingThis subcontract for Electrical System Identification and Labeling involves the supply and installation of identification nameplates and labels for prime contractors working on facility projects in Union County, North Carolina. The scope of work includes fabricating nameplates for transfer switches and applying labels to conductors and cables in accordance with Section 26 05 53. To ensure durability and compliance, the contractor must utilize UL 969 marking systems and stainless steel hardware for all outdoor applications to deliver a fully labeled electrical system. The project is categorized under NAICS code 238210 and was posted on October 5, 2026. Interested parties must submit their responses by the deadline of November 9, 2026, at 3:00 PM. The contract is managed by the County of Union in North Carolina.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 1 month ago

DEADLINE

in 4 days
View Details
NAICS: 238160
SLED
Electrical Penetration FirestoppingThis subcontract for Electrical Penetration Firestopping involves providing specialized firestopping services for prime contractors on facility projects within Union County, North Carolina. The scope of work focuses on sealing penetrations created by low-voltage conductors and cables using fire-rated sealants, pillows, or caulking in strict accordance with Section 07 84 00. The primary objective is to ensure all work complies with local building and fire codes to deliver certified fire-stopped penetrations. The opportunity was posted on October 5, 2026, with a response deadline of November 9, 2026. Classified under NAICS code 238160, this project is managed through the County of Union in North Carolina. Interested parties must adhere to the specified technical requirements to ensure the safety and regulatory compliance of the electrical cable and conduit penetrations.
Roofing Contractors

POSTED

about 1 month ago

DEADLINE

in 4 days
View Details
NAICS: 238110
SLED
Cast-in-Place Concrete PadsThis subcontract involves the construction of cast-in-place concrete equipment pads for facility projects located in Union County, North Carolina. The selected contractor will be responsible for the forming and pouring of pads designed to support electrical gear and generators, ensuring all work adheres to Section 03 30 00 standards. The scope of work requires the use of ready-mix concrete and appropriate reinforcement to deliver level and structurally sound installations for prime contractors. The project falls under NAICS code 238110 and is managed by the County of Union in North Carolina. Interested parties must submit their responses by the deadline of November 9, 2026. This engagement focuses on the delivery of completed, high-quality concrete pads that meet all specified technical and structural requirements.
Poured Concrete Foundation and Structure Contractors

POSTED

about 1 month ago

DEADLINE

in 4 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332312
Closed
SLED
Waste Bin and Container Supply
Blue Springs

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 332312
Closed
SLED
Product Purchase Contract for McKinley and Lafayette High Intensity Activated Crosswalk (HAWK) Traffic Signal Poles
Solicitation # 12700206
Capital Projects Department of City of Fresno

POSTED

about 2 months ago

CLOSED

23 days ago
View Details
NAICS: 332312
Closed
SLED
Metal Fabrications (Supply)
Public Works

POSTED

about 2 months ago

CLOSED

21 days ago
View Details
NAICS: 332312
Closed
SLED
Supply Substation Tubular Steel - QTEP Wanapum Switchyard
Solicitation # 170-13521
Grant County PUD

POSTED

about 2 months ago

CLOSED

29 days ago
View Details
NAICS: 332312
Closed
SLED
Supply Substation Tubular Steel - QTEP Wanapum Switchyard
Solicitation # 28319
Public Utility District No. 2 of Grant County, Washington

POSTED

about 2 months ago

CLOSED

30 days ago
View Details
NAICS: 332312
Closed
SLED
Satin Black Powder-Coated Round Sign Posts Supply
Utah

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 332312
Closed
SLED
Portable Toilet Unit Supplier
Department of Conservation and Recreation

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 332312
SLED
Structural & Ornamental Metals
City of Santa Cruz

POSTED

about 2 months ago

DEADLINE

in 14 days
View Details
NAICS: 332312
Closed
SLED
Structural Steel and Metal Fabrications
COUNTY OF VENTURA PUBLIC WORKS AGENCY

POSTED

about 2 months ago

CLOSED

22 days ago
View Details
NAICS: 332312
Closed
SLED
Street Light Pole Supplier
Lincoln Electric System

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 332312
Closed
SLED
Metal Fabrication (Vault Accessories)
Procurement Office

POSTED

about 2 months ago

CLOSED

21 days ago
View Details
NAICS: 332312
Closed
SLED
Pre-Curved Running and Restraining Rail Supply
Rail Operations

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS