Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Custom Protective Foam Inserts for Electric Containers

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by Construction and Equipment Containers for the Department of Defense, involves the fabrication and supply of 37 sets of custom-cut protective foam inserts. These inserts must be manufactured to P/N 14513 specifications to secure electric components within shipping containers for DLA Troop Support projects. The contractor is required to ensure that material density meets all technical requirements and that the foam blowing agents used contain no Class I ozone-depleting chemicals. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326150, with the place of performance located in Tracy, California. Interested parties must respond by October 26, 2026.

General Info

Fabricate 37 custom foam inserts for DoD shipping containers by October 26, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

NAICS

326150 - Urethane and Other Foam Product (except Polystyrene) Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8ED-27-T-0112.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHIPPING AND STORAGE C

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates and supplies precision-cut foam inserts for prime contractors on DLA Troop Support shipping container projects. Cuts foam to P/N 14513 specifications to secure electric components, ensuring material density meets technical requirements. Uses foam blowing agents containing no Class I ozone-depleting chemicals. Delivers 37 sets of custom-cut protective foam inserts.

Similar Contracts

Same NAICS industry code

Packaging Cushioning Material SupplierThis subcontract involves the supply of specialized packaging cushioning material for prime contractors working on Department of Defense projects under Construction and Equipment Containers. The supplier is required to provide eight units of material matching NSN 8145013533277, ensuring full compliance with MIL-STD-2073-1E and the DLA Packaging Requirements for Procurement RP001. The contract specifies a delivery timeline of 167 days with shipping terms set as FOB Origin. Performance for this requirement is centered in Tracy, California, under NAICS code 326150. Interested parties must have responded by the deadline of October 26, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Supply of Polyimide Foam Thermal Insulation Blocks (NSN 5640-01-371-3262)This small business set-aside subcontract through the General Services Administration involves the manufacture and supply of open-cell polyimide foam thermal insulation blocks under NSN 5640-01-371-3262. The contractor is responsible for producing 200 Type II faced panels measuring 36.0 by 24.0 by 2.0 inches, featuring Class 1 fibrous glass cloth facing. All materials must strictly adhere to MIL-DTL-24688 Revision A Amendment 1 and QPL-24688 standards, and the provider must supply OSHA/GHS compliant Safety Data Sheets. The agreement specifies delivery of the units FOB Destination to Vista, California, with performance associated with the Kansas City area. Managed by the Supply Chain Management Contracting Division of the GSA/FAS/GSS/QSCB, the contract falls under NAICS code 326150. The solicitation period is brief, with a posting date of October 14, 2026, and a response deadline of October 20, 2026.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

NSN 5640013713262; INSULATION BLOCK, THERMAL

Solicitation # 47QSSC26Q7586

Solicitation 47QSSC26Q7586 is a brand name or equal procurement for 200 sheets of thermal insulation blocks under NSN 5640013713262. The required material must be an open-cell polyimide foam, Type II faced panel, Class 1 fibrous glass cloth faced, with nominal dimensions of 36.0 inches in length, 24.0 inches in width, and 2.0 inches in thickness. All products must comply with MIL-DTL-24688 Revision A Amendment 1 and QPL-24688. This is a total small business set-aside under NAICS 326150, and because it falls under the Simplified Acquisition Threshold, the nonmanufacturer rule does not apply. The contract is an all-or-none award based on the lowest evaluated price among responsible offerors who pass administrative and technical acceptability screenings. To be considered valid, quotes must include the completed Request for Quote document and the MIL STD 129R compliance form submitted via email to the designated point of contact. Delivery is FOB Destination, CONUS, with a primary shipping location in Vista, California. Strict adherence to packaging and marking standards is required, including MIL-STD-129R for military deliveries and the provision of OSHA/GHS compliant Safety Data Sheets with each transport package.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

Sound Controlling Boards

Solicitation # 47QSSC-26-Q-0266

The General Services Administration, Supply Chain Management Contracting Service Center, is soliciting quotes for the procurement of 395 sheets of Sound Controlling Board under solicitation 47QSSC-26-Q-0266. The required materials must be new, open-cell polyimide foam faced panels (Type II, Class 2) measuring 48.0 by 24.0 by 1.5 inches, conforming to MIL-DTL-24688 Revision A Amendment 1 and QPL-24688. Delivery is required within the Continental United States to Norfolk, Virginia, and must comply with MIL-STD-129R marking and labeling standards, as well as GSAM provision 552.211-73. This is not a small business set-aside, though HUBZone price evaluation preferences apply. Award will be based on the Lowest Price Technically Acceptable (LPTA) mechanism. To be eligible, vendors must be registered for Purchase Orders via EDI or the OMS Vendor Portal and submit all technical specifications and completed administrative forms via email to kristi.riley@gsa.gov by October 19, 2026, at 5:00 PM EDT. Failure to complete all required administrative fields or provide technical specifications will result in the offer being excluded from further consideration.

Gsa/fas/gss/qscbd/assisted Contracting Branch B

POSTED

DEADLINE

Manufacture and Supply of MIL-PRF-6855F Nonmetallic TubingThis subcontract involves the manufacture and supply of nonmetallic tubing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the extrusion or molding of synthetic rubber tubing in strict accordance with MIL-PRF-6855F(1) and MIL-PRF-6855/4A(1) standards. The contractor is responsible for performing First Article Testing as specified in MIL-R-6855E Table VII and maintaining full compliance with QAP 16236. The final delivery consists of 183 feet of tubing, which must be accompanied by a First Article Testing report and detailed shelf-life documentation. All materials must be packaged according to MIL-STD-2073-1E and MIL-STD-129 guidelines. The project falls under NAICS code 326150 and is associated with performance activities located in New Cumberland.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

O-Ring Fabrication and ManufacturingThis subcontract involves the fabrication and manufacturing of 19 high-precision, asbestos-free O-rings for the DLA Weapons Support Land Supply Chain. The components must be produced according to NSN 5331-01-455-7990 dimensions and RA001 technical requirements. Acceptable production methods include industrial rubber molding or machining, though additive manufacturing is strictly prohibited. The selected provider must maintain ITAR/EAR compliance and hold US/Canada Joint Certification Program certification. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

CUSHIONING MATERIAL

Solicitation # SPE8ED-27-T-0070

Solicitation SPE8ED-27-T-0070 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment Containers, for the procurement of two units of cushioning material (NSN 8135-01-280-2879). The contract requires delivery within 20 days after order, with shipping, inspection, and acceptance all occurring at the point of origin. Quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by October 19, 2026. The award process may be automated, and a price evaluation preference is available for certified HUBZone Small Business Concerns. The contractor must adhere to strict quality and security standards, including ISO 9001:2015 certification for the manufacturer's inspection system and compliance with CMMC Level 2 and NIST SP 800-171 for cybersecurity. Technical data associated with this item is subject to export control under ITAR or EAR regulations. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with specific requirements for shelf-life marking and hazardous material labeling per the Hazard Communication Standard. Additionally, the contract incorporates the Buy American and Balance of Payments Program, requiring disclosure for any non-domestic materials used.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Open Cell Foam Joint System Manufacturer/SupplierThis subcontract opportunity is for a manufacturer and supplier to provide a complete, integrated bridge joint system for prime contractors operating within the MoDOT St. Louis District. The scope of work involves the manufacture of cellular polyurethane foam impregnated with hydrophobic polymer and water-based emulsion, featuring a factory-applied fuel-resistant silicone coating. Additionally, the supplier is responsible for providing factory-fabricated watertight transition assemblies, ASTM C 881 epoxy adhesive primers, and ASTM D 5893 silicone sealant bands, with all components delivered directly to the designated MoDOT sites. The solicitation is categorized under NAICS code 326150 and was posted on October 6, 2026. Interested parties must submit their responses by the deadline of October 20, 2026, at 3:00 PM. This contract ensures that all critical materials for the bridge joint systems meet specific technical standards and are delivered as a comprehensive package to support infrastructure projects in Missouri.

MODOT ST LOUIS DISTRICT

POSTED

DEADLINE

Open Cell Foam Joint System

Solicitation # MODOT SL 0000000088SL

The Missouri Department of Transportation St. Louis District is soliciting bids for an Open Cell Foam Joint System under solicitation number MODOT SL 0000000088SL. The contract runs from the date of award through October 31, 2027, with options for two additional one-year extensions. The required system must be provided by a single manufacturer and consist of cellular polyurethane foam impregnated with 100 percent hydrophobic polymer and factory-coated with fuel-resistant silicone, field-applied epoxy adhesive primer meeting ASTM C 881, and field-applied silicone sealant bands meeting ASTM D 5893. The system must maintain a temperature service range of -40 to 185 degrees Fahrenheit and offer a working range of 50 percent in both tension and compression. Awards will be granted to the lowest and best bid that complies with all mandatory specifications and Missouri statutes, utilizing a multiattribute scoring method. Bidders must submit their proposals via the MissouriBUYS portal or as sealed hard copies by October 20, 2026. Key requirements include compliance with the Domestic Products Procurement Act, with a 10 percent preference for U.S.-manufactured goods, and adherence to nondiscrimination and drug-free workplace laws. All pricing must be FOB destination freight prepaid, including all packing and handling charges. Payments will be made in arrears, and the state reserves the right to use a state purchasing card for transactions.

MODOT ST LOUIS DISTRICT

POSTED

DEADLINE

SEAT-VL URETHANE — 4820000543850 — N0010426QNE45

Solicitation # N0010426QNE45

Solicitation NO0014-26-Q-NE45, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a total small business set-aside for the procurement of Seat-VL Urethane (NSN 4820-00-054-3850). The material is designated as Special Emphasis Level I Scope of Certification material because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. The seats must be manufactured from MD71-GG Mearthane (Graphite Filled Urethane) by Mearthane Products Inc. and must adhere to strict chemical and mechanical properties, including specific hardness, tensile strength, and water absorption limits. The contract requires a one-year warranty from the date of delivery and a 120-day delivery window with FOB destination terms. The contractor must maintain a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025. Rigorous traceability is mandatory, requiring each seat to be permanently marked per MIL-STD-792 to link the part to its specific heat, lot, or batch certification data. Key deliverables include a Certificate of Compliance and material certification test reports, which must be submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Packaging and marking must strictly follow MIL-STD-2073-1 and MIL-STD-129 standards.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Engine Inlet Bellmouth Housing FabricationThis subcontract involves the fabrication of the Engine Inlet Bellmouth Housing, Male (Part Number: 4106AS0275), supporting prime contractors for the Navy NAWC PMA-262/MQ-4C Program Office. The project requires the use of urethane or specialized foam molding processes to engineer components specifically for the AE3007H Turbofan Engine Inlet, utilizing molding equipment designed for aircraft maintenance specialized equipment. Managed by the Navair Warfare Ctr Aircraft Division under the Department of Defense, the work is performed in Lakehurst. The opportunity was posted on September 2, 2026, with a response deadline of November 1, 2026, and falls under NAICS code 326150.

Navair Warfare Ctr Aircraft Division

POSTED

about 1 month ago

DEADLINE

Engine Inlet Bellmouth Housing, Male

Solicitation # N68335-26-R-1113

The Naval Air Warfare Center Aircraft Division, specifically the PMA-262/MQ-4C Program Office, is issuing a sources-sought request for information under solicitation number N68335-26-R-1113. The agency is seeking industry feedback and comments regarding the capability to manufacture the Engine Inlet Bellmouth Housing, Male, identified as part number 4106AS0275. Production must align with the Navy Technical Data Package and 3D CAD data file 3673310M01110-11. If the requirement is eventually awarded, the Navy intends to provide the existing part mold as Government Furnished Equipment during the period of performance. This request is for information and planning purposes only and does not constitute a formal solicitation or a promise of a future award. Interested parties must provide administrative details, company experience, technical manufacturing information, and rough order of magnitude pricing and schedules for quantities of one, five to ten, and twenty or more units. The response deadline is November 1, 2026. The project falls under NAICS code 326150 and is associated with the Department of Defense, with the place of performance located in Lakehurst, New Jersey. Amendment 0001 was issued specifically to update the time zone in the RFI attachment.

Navair Warfare Ctr Aircraft Division

POSTED

about 1 month ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

Military Packaging and Marking SpecialistThis subcontract for Military Packaging and Marking Specialist services involves providing specialized packaging, marking, and palletization for prime contractors fulfilling DLA supply contracts. The scope of work requires the delivery of 20 containers prepared for international transit, utilizing industrial palletizing equipment and compliant labeling systems. All activities must strictly adhere to ASTM D3951 for packaging, RP001 for palletization, and MIL-STD-129 for marking and labeling. The opportunity is issued by Construction and Equipment Containers under the Department of Defense, falling under NAICS code 488510. Interested parties must note the response deadline of October 26, 2026, following the posting date of October 15, 2026.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

International Freight Forwarder (USA to Poland)This subcontract, issued by Construction and Equipment Containers for the Department of Defense, requires an international freight forwarder to manage the transport of shipping containers from the USA to Poland. The scope of work involves coordinating ocean or air freight for prime contractors fulfilling DLA supply contracts, with a specific focus on managing customs brokerage and clearance for military equipment. The contractor is responsible for ensuring all shipments utilize traceable means and executing the final last-mile delivery to the US Army 299 BSB 2ABCT FOS DCTC located in Drawsko Pomorskie. This requirement falls under NAICS code 488510, with a response deadline set for October 26, 2026.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Collapsible Shipping Container Manufacturer (NSN 8145015024901)This subcontract involves the manufacture and supply of 20 collapsible shipping containers meeting NSN 8145015024901 specifications for prime contractors supporting Department of Defense DLA supply contracts. The scope of work includes the fabrication of container frames and panels, the integration of specialized locking mechanisms to enable collapsible functionality, and the application of required protective coatings. The contractor must ensure all deliverables strictly adhere to the Buy American Act and the DLA Master List of Technical and Quality Requirements RA001. Managed under NAICS code 332439, the project is overseen by Construction and Equipment Containers for the Department of Defense, with a response deadline set for October 26, 2026.

Other Metal Container Manufacturing

POSTED

about 13 hours ago

DEADLINE

Defense-Compliant Packaging and Freight ServicesThis subcontract for Defense-Compliant Packaging and Freight Services involves providing specialized packaging and transportation for prime contractors on DLA supply contracts. The selected provider must ensure all items are packaged according to ASTM D3951 and MIL-STD-129 standards and execute RP001 palletization requirements. The scope of work includes transporting equipment via traceable shipping methods to the Distribution Management Office at Camp Pendleton, California, and ensuring the successful delivery of accepted equipment. This effort is managed under the Department of Defense with a focus on strict adherence to military packaging and shipping specifications.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Technical Equipment Supplier (NSN 8145016656785)This subcontract involves the supply of one unit of part number TMS151160 for prime contractors under Department of Defense supply contracts. The equipment must be manufactured or sourced from Technical Marketing Systems, Inc., with strict adherence to the DLA Master List, the Buy American Act, and the Berry Amendment. The performance of this contract will take place at Camp Pendleton. The opportunity is categorized under NAICS code 332439 and is managed by Construction and Equipment Containers. Interested parties must respond by October 26, 2026, to fulfill the delivery requirement of the specified technical equipment.

Other Metal Container Manufacturing

POSTED

about 13 hours ago

DEADLINE

SHIPPING AND STORAG

Solicitation # SPE8ED-27-T-0124

Solicitation SPE8ED-27-T-0124 is a Department of Defense procurement issued by the Defense Logistics Agency for one unit of a specific item identified by NSN 8145016656785 and part number TMS151160 from Technical Marketing Systems, Inc. The contract requires delivery within 20 days after the order is placed, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The item is to be delivered to the Distribution Management Office at Camp Pendleton, California, using traceable shipping means rather than parcel post. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List requirements and RP001 palletization standards take precedence. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including those regarding the Buy American Act, the Berry Amendment, and safeguarding covered defense information. Proposals are due by October 26, 2026, and the government may apply a HUBZone price evaluation preference during the award process.

Other Metal Container Manufacturing

POSTED

about 13 hours ago

DEADLINE

CONTAINER, COLLAPSIB

Solicitation # SPE8ED-27-T-0123

Solicitation SPE8ED-27-T-0123, managed by DLA Troop Support, Construction and Equipment Containers, is for the procurement of 20 collapsible shipping containers (NSN 8145015024901). The contract specifies a delivery period of 20 days with an original required delivery date of July 23, 2026. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination. The items are to be shipped to the US Army 299 BSB 2ABCT FOS DCTC in Drawsko Pomorskie, Poland, using traceable means. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List requirements and RP001 palletization standards taking precedence. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow (WAWF) system. The procurement is governed by NAICS code 332439 and incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and specific prohibitions on certain telecommunications equipment. Quotations were required to be submitted via the DIBBS portal by October 26, 2026.

Other Metal Container Manufacturing

POSTED

about 13 hours ago

DEADLINE

Specialized Shipping Container Skid FabricatorThis subcontract involves the fabrication of three custom transmission shipping container skids for prime contractors supporting DLA Troop Support Construction and Equipment Containers projects. The work must be performed in Corpus Christi, Texas, and requires strict adherence to NSN 8145010457880 and PN 8115MNP087 specifications. The selected fabricator is responsible for applying necessary heat treat markings and ensuring all packaging meets RP001 and ASTM D3951 standards. Additionally, all deliverables must be marked and labeled in accordance with MIL-STD-129. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026.

All Other Miscellaneous Wood Product Manufacturing

POSTED

DEADLINE

ISPM 15 Hardwood Lumber SupplierThis subcontract opportunity is for a supplier to provide raw Hardwood Group 4 lumber to prime contractors supporting Department of Defense projects for DLA Troop Support Construction and Equipment Containers. The required materials must adhere to ASTM D6199 standards and undergo ISPM 15 heat treatment to ensure compliance for international trade. All delivered lumber must be certified and free of structural defects. The performance of this contract will take place in Corpus Christi, Texas. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026. The procurement falls under NAICS code 423120.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Strapping Seal Manufacturer/SupplierThis subcontract involves the manufacture and supply of 200 strapping seals for prime contractors working on DLA Troop Support projects. The supplier is responsible for providing seals identified by NSN 8135-01-208-0253 in accordance with DLA Master List RA001. All materials must comply with the Buy American Act, and the final products must be packaged and marked according to ASTM D3951 and MIL-STD-129 standards, with palletization following DLA requirement RP001. The contract is managed under the Department of Defense for Construction and Equipment Containers. The completed order of packaged and marked seals is to be delivered to Yakima, Washington. Interested parties should note the response deadline of October 26, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

MIL-STD-129 Compliant Packaging ServicesThis subcontract involves providing specialized packaging, marking, and labeling services for prime contractors fulfilling DLA supply contracts. The scope of work requires the packaging of five pressure tanks in strict accordance with ASTM D3951, marking and labeling per MIL-STD-129, and palletization following RP001 DLA Packaging Requirements for Procurement. The completed units are to be delivered to DLA Distribution New Cumberland. This effort is managed under the Department of Defense with a designated NAICS code of 488510, and the response deadline for the solicitation is October 26, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Pressure Tank Supplier (NSN 5430014979981)This subcontract through Construction and Equipment Containers involves the supply of five pressure tanks for prime contractors fulfilling Department of Defense DLA supply contracts. The specific requirement is for NSN 5430014979981, corresponding to Crane Carrier Company part number 313-0005. All units must be manufactured or sourced in strict accordance with the technical specifications outlined in the DLA Master List of Technical and Quality Requirements RA001, and additive manufacturing is strictly prohibited unless authorized by the ESA. The contract is categorized under NAICS code 332313 with performance taking place in New Cumberland. Delivery terms are established as FOB Origin. Interested parties should note the response deadline of October 26, 2026, to ensure compliance with the solicitation timeline.

Plate Work Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS