Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

NSN 5640013713262; INSULATION BLOCK, THERMAL

Active
47QSSC26Q7586Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation 47QSSC26Q7586 is a brand name or equal procurement for 200 sheets of thermal insulation blocks under NSN 5640013713262. The required material must be an open-cell polyimide foam, Type II faced panel, Class 1 fibrous glass cloth faced, with nominal dimensions of 36.0 inches in length, 24.0 inches in width, and 2.0 inches in thickness. All products must comply with MIL-DTL-24688 Revision A Amendment 1 and QPL-24688. This is a total small business set-aside under NAICS 326150, and because it falls under the Simplified Acquisition Threshold, the nonmanufacturer rule does not apply. The contract is an all-or-none award based on the lowest evaluated price among responsible offerors who pass administrative and technical acceptability screenings. To be considered valid, quotes must include the completed Request for Quote document and the MIL STD 129R compliance form submitted via email to the designated point of contact. Delivery is FOB Destination, CONUS, with a primary shipping location in Vista, California. Strict adherence to packaging and marking standards is required, including MIL-STD-129R for military deliveries and the provision of OSHA/GHS compliant Safety Data Sheets with each transport package.

General Info

Procurement of 200 thermal insulation blocks for a total small business set-aside.

Agency

General Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

NAICS

326150 - Urethane and Other Foam Product (except Polystyrene) Manufacturing

Place of Performance

Kansas City, MO, USA

Set-Aside

SBA

Documents

3

IPD 5640-01-371-3262 - Insulation Block, Thermal

DOCX, High priority: read this firstspecifications
High

MIL-STD-129R Military Standard Marking and Shipping Label Requirements

PDF, High priority: read this first10 pages · specifications
High

RFQ 47QSSC26Q7586 - NSN 5640013713262

DOCX, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGeneral Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb
Contacts1 person available
OfficeWashington, DC, 20006, USA
Organization / AgencyGeneral Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb
Office AddressWashington, DC, 20006, USA
Contacts
Desmond Sysengchanh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

This is a BRAND NAME OR EQUAL procurement for a Quantity 200 of NSN 5640013713262, with the following description:


NSN 5640013713262


INSULATION BLOCK, THERMAL: Shall be in accordance with MIL-DTL-24688 Revision A Amendment 1 dated June 28, 2022 and QPL-24688. (As of the issue date of this IPD, no qualified sources for this material exist on the referenced QPL. Procured items must still be in accordance with MIL-DTL-24688.) Material shall conform to the following salient characteristics:



TYPE II: Faced panel


CLASS 1: Fibrous glass cloth faced (thermal)


MATERIAL: Polyimide foam, open-cell


LENGTH: 36.0 inches nominal


WIDTH: 24.0 inches nominal


THICKNESS: 2.0 inches nominal



MIL-DTL-24688 – Detail Specification: Insulation, Thermal and Acoustic Absorptive, Cellular Polyimide Foam



Copies of this document are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094 or online at https://qpldocs.dla.mil/.



UNIT OF ISSUE: SH (Sheet).



PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.



For your quote to be considered valid, you MUST complete and return BOTH the Request for Quote Document and MIL STD 129R via email to desmond.sysengchanh@gsa.gov. Otherwise, failure to complete, sign, and return the documents to the email address will result in your response and quote being INVALID and be given NO FURTHER CONSIDERATION for award

Similar Contracts

Same NAICS industry code

NAICS: 326150
New
DIBBS
Packaging Cushioning Material SupplierThis subcontract involves the supply of specialized packaging cushioning material for prime contractors working on Department of Defense projects under Construction and Equipment Containers. The supplier is required to provide eight units of material matching NSN 8145013533277, ensuring full compliance with MIL-STD-2073-1E and the DLA Packaging Requirements for Procurement RP001. The contract specifies a delivery timeline of 167 days with shipping terms set as FOB Origin. Performance for this requirement is centered in Tracy, California, under NAICS code 326150. Interested parties must have responded by the deadline of October 26, 2026.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326150
New
DIBBS
Custom Protective Foam Inserts for Electric ContainersThis subcontract, issued by Construction and Equipment Containers for the Department of Defense, involves the fabrication and supply of 37 sets of custom-cut protective foam inserts. These inserts must be manufactured to P/N 14513 specifications to secure electric components within shipping containers for DLA Troop Support projects. The contractor is required to ensure that material density meets all technical requirements and that the foam blowing agents used contain no Class I ozone-depleting chemicals. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326150, with the place of performance located in Tracy, California. Interested parties must respond by October 26, 2026.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326150
New
Federal
Supply of Polyimide Foam Thermal Insulation Blocks (NSN 5640-01-371-3262)This small business set-aside subcontract through the General Services Administration involves the manufacture and supply of open-cell polyimide foam thermal insulation blocks under NSN 5640-01-371-3262. The contractor is responsible for producing 200 Type II faced panels measuring 36.0 by 24.0 by 2.0 inches, featuring Class 1 fibrous glass cloth facing. All materials must strictly adhere to MIL-DTL-24688 Revision A Amendment 1 and QPL-24688 standards, and the provider must supply OSHA/GHS compliant Safety Data Sheets. The agreement specifies delivery of the units FOB Destination to Vista, California, with performance associated with the Kansas City area. Managed by the Supply Chain Management Contracting Division of the GSA/FAS/GSS/QSCB, the contract falls under NAICS code 326150. The solicitation period is brief, with a posting date of October 14, 2026, and a response deadline of October 20, 2026.
Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 326150
New
Federal
Sound Controlling Boards
Solicitation # 47QSSC-26-Q-0266
The General Services Administration, Supply Chain Management Contracting Service Center, is soliciting quotes for the procurement of 395 sheets of Sound Controlling Board under solicitation 47QSSC-26-Q-0266. The required materials must be new, open-cell polyimide foam faced panels (Type II, Class 2) measuring 48.0 by 24.0 by 1.5 inches, conforming to MIL-DTL-24688 Revision A Amendment 1 and QPL-24688. Delivery is required within the Continental United States to Norfolk, Virginia, and must comply with MIL-STD-129R marking and labeling standards, as well as GSAM provision 552.211-73. This is not a small business set-aside, though HUBZone price evaluation preferences apply. Award will be based on the Lowest Price Technically Acceptable (LPTA) mechanism. To be eligible, vendors must be registered for Purchase Orders via EDI or the OMS Vendor Portal and submit all technical specifications and completed administrative forms via email to kristi.riley@gsa.gov by October 19, 2026, at 5:00 PM EDT. Failure to complete all required administrative fields or provide technical specifications will result in the offer being excluded from further consideration.
Gsa/fas/gss/qscbd/assisted Contracting Branch B

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 326150
New
DIBBS
Manufacture and Supply of MIL-PRF-6855F Nonmetallic TubingThis subcontract involves the manufacture and supply of nonmetallic tubing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the extrusion or molding of synthetic rubber tubing in strict accordance with MIL-PRF-6855F(1) and MIL-PRF-6855/4A(1) standards. The contractor is responsible for performing First Article Testing as specified in MIL-R-6855E Table VII and maintaining full compliance with QAP 16236. The final delivery consists of 183 feet of tubing, which must be accompanied by a First Article Testing report and detailed shelf-life documentation. All materials must be packaged according to MIL-STD-2073-1E and MIL-STD-129 guidelines. The project falls under NAICS code 326150 and is associated with performance activities located in New Cumberland.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 326150
New
DIBBS
O-Ring Fabrication and ManufacturingThis subcontract involves the fabrication and manufacturing of 19 high-precision, asbestos-free O-rings for the DLA Weapons Support Land Supply Chain. The components must be produced according to NSN 5331-01-455-7990 dimensions and RA001 technical requirements. Acceptable production methods include industrial rubber molding or machining, though additive manufacturing is strictly prohibited. The selected provider must maintain ITAR/EAR compliance and hold US/Canada Joint Certification Program certification. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 23, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 326150
DIBBS
CUSHIONING MATERIAL
Solicitation # SPE8ED-27-T-0070
Solicitation SPE8ED-27-T-0070 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment Containers, for the procurement of two units of cushioning material (NSN 8135-01-280-2879). The contract requires delivery within 20 days after order, with shipping, inspection, and acceptance all occurring at the point of origin. Quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by October 19, 2026. The award process may be automated, and a price evaluation preference is available for certified HUBZone Small Business Concerns. The contractor must adhere to strict quality and security standards, including ISO 9001:2015 certification for the manufacturer's inspection system and compliance with CMMC Level 2 and NIST SP 800-171 for cybersecurity. Technical data associated with this item is subject to export control under ITAR or EAR regulations. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with specific requirements for shelf-life marking and hazardous material labeling per the Hazard Communication Standard. Additionally, the contract incorporates the Buy American and Balance of Payments Program, requiring disclosure for any non-domestic materials used.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

9 days ago

DEADLINE

in 3 days
View Details
NAICS: 326150
SLED
Open Cell Foam Joint System Manufacturer/SupplierThis subcontract opportunity is for a manufacturer and supplier to provide a complete, integrated bridge joint system for prime contractors operating within the MoDOT St. Louis District. The scope of work involves the manufacture of cellular polyurethane foam impregnated with hydrophobic polymer and water-based emulsion, featuring a factory-applied fuel-resistant silicone coating. Additionally, the supplier is responsible for providing factory-fabricated watertight transition assemblies, ASTM C 881 epoxy adhesive primers, and ASTM D 5893 silicone sealant bands, with all components delivered directly to the designated MoDOT sites. The solicitation is categorized under NAICS code 326150 and was posted on October 6, 2026. Interested parties must submit their responses by the deadline of October 20, 2026, at 3:00 PM. This contract ensures that all critical materials for the bridge joint systems meet specific technical standards and are delivered as a comprehensive package to support infrastructure projects in Missouri.
MODOT ST LOUIS DISTRICT

POSTED

10 days ago

DEADLINE

in 4 days
View Details
NAICS: 326150
SLED
Open Cell Foam Joint System
Solicitation # MODOT SL 0000000088SL
The Missouri Department of Transportation St. Louis District is soliciting bids for an Open Cell Foam Joint System under solicitation number MODOT SL 0000000088SL. The contract runs from the date of award through October 31, 2027, with options for two additional one-year extensions. The required system must be provided by a single manufacturer and consist of cellular polyurethane foam impregnated with 100 percent hydrophobic polymer and factory-coated with fuel-resistant silicone, field-applied epoxy adhesive primer meeting ASTM C 881, and field-applied silicone sealant bands meeting ASTM D 5893. The system must maintain a temperature service range of -40 to 185 degrees Fahrenheit and offer a working range of 50 percent in both tension and compression. Awards will be granted to the lowest and best bid that complies with all mandatory specifications and Missouri statutes, utilizing a multiattribute scoring method. Bidders must submit their proposals via the MissouriBUYS portal or as sealed hard copies by October 20, 2026. Key requirements include compliance with the Domestic Products Procurement Act, with a 10 percent preference for U.S.-manufactured goods, and adherence to nondiscrimination and drug-free workplace laws. All pricing must be FOB destination freight prepaid, including all packing and handling charges. Payments will be made in arrears, and the state reserves the right to use a state purchasing card for transactions.
MODOT ST LOUIS DISTRICT

POSTED

10 days ago

DEADLINE

in 4 days
View Details
NAICS: 326150
SEAT-VL URETHANE — 4820000543850 — N0010426QNE45
Solicitation # N0010426QNE45
Solicitation NO0014-26-Q-NE45, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a total small business set-aside for the procurement of Seat-VL Urethane (NSN 4820-00-054-3850). The material is designated as Special Emphasis Level I Scope of Certification material because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. The seats must be manufactured from MD71-GG Mearthane (Graphite Filled Urethane) by Mearthane Products Inc. and must adhere to strict chemical and mechanical properties, including specific hardness, tensile strength, and water absorption limits. The contract requires a one-year warranty from the date of delivery and a 120-day delivery window with FOB destination terms. The contractor must maintain a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025. Rigorous traceability is mandatory, requiring each seat to be permanently marked per MIL-STD-792 to link the part to its specific heat, lot, or batch certification data. Key deliverables include a Certificate of Compliance and material certification test reports, which must be submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Packaging and marking must strictly follow MIL-STD-2073-1 and MIL-STD-129 standards.
Navsup Weapon Systems Support Mech

POSTED

15 days ago

DEADLINE

in 18 days
View Details
NAICS: 326150
Federal
Engine Inlet Bellmouth Housing FabricationThis subcontract involves the fabrication of the Engine Inlet Bellmouth Housing, Male (Part Number: 4106AS0275), supporting prime contractors for the Navy NAWC PMA-262/MQ-4C Program Office. The project requires the use of urethane or specialized foam molding processes to engineer components specifically for the AE3007H Turbofan Engine Inlet, utilizing molding equipment designed for aircraft maintenance specialized equipment. Managed by the Navair Warfare Ctr Aircraft Division under the Department of Defense, the work is performed in Lakehurst. The opportunity was posted on September 2, 2026, with a response deadline of November 1, 2026, and falls under NAICS code 326150.
Navair Warfare Ctr Aircraft Division

POSTED

about 1 month ago

DEADLINE

in 17 days
View Details
NAICS: 326150
Federal
Engine Inlet Bellmouth Housing, Male
Solicitation # N68335-26-R-1113
The Naval Air Warfare Center Aircraft Division, specifically the PMA-262/MQ-4C Program Office, is issuing a sources-sought request for information under solicitation number N68335-26-R-1113. The agency is seeking industry feedback and comments regarding the capability to manufacture the Engine Inlet Bellmouth Housing, Male, identified as part number 4106AS0275. Production must align with the Navy Technical Data Package and 3D CAD data file 3673310M01110-11. If the requirement is eventually awarded, the Navy intends to provide the existing part mold as Government Furnished Equipment during the period of performance. This request is for information and planning purposes only and does not constitute a formal solicitation or a promise of a future award. Interested parties must provide administrative details, company experience, technical manufacturing information, and rough order of magnitude pricing and schedules for quantities of one, five to ten, and twenty or more units. The response deadline is November 1, 2026. The project falls under NAICS code 326150 and is associated with the Department of Defense, with the place of performance located in Lakehurst, New Jersey. Amendment 0001 was issued specifically to update the time zone in the RFI attachment.
Navair Warfare Ctr Aircraft Division

POSTED

about 1 month ago

DEADLINE

in 17 days
View Details

More opportunities from General Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

Same awarding agency

NAICS: 333310
New
Federal
Katadyn Survivor 06-LL-1 Military Desalination Unit (Part Number 8021418)
Solicitation # R570826076MS00
Commercial and Service Industry Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 332216
Federal
Purchase NSN 5210002212047
Solicitation # 47QSSC27Q0018
Solicitation 47QSSC27Q0018 is a request for quote issued by the General Services Administration for the purchase of 156 Engineer's Taper-Wire-Thickness Gages (NSN 5210-00-221-2047). Each gage must include nine thickness blades ranging from .002 to 1/16th inch, one taper gage blade from 1/64 to 3/16 inch with a 3-inch scale, and one English wire gage blade from 19 to 36 with 1/16 and 1/8 inch slots. All units must be provided with a case and blade lock, and be permanently marked with the manufacturer's name or symbol and part number. The total quantity is split equally with 78 units destined for Atlanta, Georgia, and 78 units for Fort Bliss, Texas, with a requested delivery timeline of 30 days after receipt of order on an FOB Destination basis. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. To be considered responsive, offerors must submit a complete quote via email to Amya Watts by October 17, 2026, including the completed RFQ document and a signed MIL-STD-129 certification. Offerors must maintain active registration in SAM.gov and comply with strict packaging and marking standards, specifically MIL-STD-129 for military deliveries and ASTM D-3951 for commercial packaging. The contract is governed by FAR Part 12 for commercial products and includes various federal clauses regarding business ethics, trafficking in persons, and Buy American preferences.
Saw Blade and Handtool Manufacturing

POSTED

8 days ago

DEADLINE

in 1 day
View Details
NAICS: 332216
Federal
Brand Name National Stock Numbers: Industry Feedback Request
Solicitation # 47QSSC-25-FH-BRANDNAMERFI
The General Services Administration Supply Chain Management Contracting Division is conducting a continuous Request for Information to validate Brand Name National Stock Numbers (NSNs) and their associated Item Purchase Descriptions. The agency is seeking industry feedback to determine if the requirements for various items, including office equipment, hand and power tools, and specialized supplies, can only be met by the specific manufacturers currently listed or if viable substitute brands and part numbers exist. This effort aims to maximize competition and ensure that brand-name restrictions remain relevant and necessary. Interested respondents must submit their feedback using a designated excel template, providing complete supporting documentation for any proposed substitutes. All submitted literature must clearly reference the associated NSN on every page. The government will not consider submissions for items on the AbilityOne Procurement List or those relying on unauthorized proprietary or restricted technical data. While this is an information-gathering phase, the broader procurement strategy involves a division-wide justification for other than full and open competition with an estimated ten-year spend projection of 595 million dollars, with awards based on fair and reasonable pricing determinations conducted under FAR 12.204 and GSAR 538.71.
Saw Blade and Handtool Manufacturing

POSTED

17 days ago

DEADLINE

in 4 months
View Details
NAICS: 423850
Federal
Mission-Critical/Safety Component SupplierThis subcontract opportunity with the General Services Administration's Supply Chain Management Contracting Division involves the provision of brand-name hardware and mission-critical components for prime contractors. The supplier must provide genuine OEM parts that are validated for interoperability with federal agency systems and the Department of War. All deliverables must strictly adhere to DODM 4100.39 and DODI 4140.69 compliance standards. The contract falls under NAICS code 423850 and is based in Kansas City, Kansas. Interested parties must submit their responses by February 12, 2027. This engagement focuses on ensuring the integrity and validation of safety components within the federal supply chain.
Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

about 2 months ago

DEADLINE

in 4 months
View Details
NAICS: 423610
Federal
Brand Name Paper Products SupplierThis subcontract opportunity with the General Services Administration involves the supply of brand-name paper products, specifically toilet paper and paper towels, for prime contractors on GSA Federal Acquisition Service supply chain contracts. The selected provider must be an original manufacturer or an authorized distributor to ensure all products match exact manufacturer specifications and National Stock Numbers. The contract is categorized under NAICS code 423610 and is managed by the Supply Chain Management Contracting Division. Performance will take place in Kansas City, Kansas. Interested parties must submit their responses by February 12, 2027.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 2 months ago

DEADLINE

in 4 months
View Details
NAICS: 484220
Federal
Container Delivery and On-Site Placement at Naval BasesThe contract requires the transport and precise on-site placement of four 40-yard roll-off containers at Naval Base Coronado and Naval Base North Island, adhering strictly to military base access procedures and logistical protocols. Service providers must navigate secure military environments, follow established entry requirements, and coordinate with base personnel to ensure timely and safe delivery without disrupting operations. The work demands a high level of coordination, reliability, and compliance with federal and defense-specific regulations governing transportation and waste management on active installations. This subcontract falls under NAICS code 484220, which classifies it within the freight transportation industry, specifically heavy and tractor-trailer trucking. Managed by the General Services Administration's Supply Chain Management Contracting Division under the GSA FAS GSS QSCB office, the opportunity was posted on July 28, 2026, and is open to qualified subcontractors meeting the technical and security standards required for military site access. Performance is expected to be completed within the specified locations in Coronado, with no additional state or zip details provided, and contractors must be prepared to operate under stringent base security and scheduling constraints.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 332420
Federal
Heavy-Duty Roll-Off Container ManufacturingThe contract requires the manufacture and delivery of four 40-yard heavy-duty steel roll-off containers designed to meet stringent military structural and compatibility standards, ensuring seamless operation with Government-owned roll-off trucks. These containers must be built to withstand demanding operational conditions, with specifications tailored to military use, including robust construction, durability under heavy loads, and precise dimensional and functional alignment with existing military equipment. The work is to be completed under a subcontract, with no set-aside provisions specified, and falls under the NAICS code 332420 for fabricated metal product manufacturing. The solicitation was posted on July 28, 2026, by the Supply Chain Management Contracting Division of the General Services Administration under its GSA/FAS/GSS/QSCB office. The place of performance is designated as Coronado, though no specific address or point of contact is provided. The contract is not open for public bid through a public solicitation number, indicating it is likely issued as a downstream subcontract under a larger government procurement framework. All units must be fully compliant with military-grade requirements prior to delivery, and failure to meet structural or compatibility standards will result in rejection.
Metal Tank (Heavy Gauge) Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Commercial Item Subcontracting CoordinationThis contract involves the management of subcontracting activities for commercial items under FAR 52.244-6, requiring strict adherence to federal regulations surrounding subcontractor selection, compliance monitoring, and proper documentation. The contractor must ensure that all applicable federal clauses are accurately flowed down to subcontractors and that all subcontracting arrangements are fully compliant with government standards. The effort is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code 541611 confirms the work scope relates to management consulting services. Performance is required in Galveston, Texas, with the contract administered by the Supply Chain Management Contracting Division within the General Services Administration’s Federal Acquisition Service. The contract emphasizes transparent subcontracting practices and comprehensive recordkeeping to maintain accountability throughout the supply chain.
Administrative Management and General Management Consulting Services

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 561910
Federal
Packaging, Marking, and Labeling ServicesThe contract requires comprehensive packaging, marking, and labeling services compliant with MIL-STD-129R and ASTM D-3951 standards, ensuring all containers are properly prepared for military logistics and defense supply chains. All levels of packaging must include 2D PDF417 barcodes applied accurately to enable efficient tracking, inventory management, and delivery verification throughout the supply chain. The work is designated as a Total Small Business Set-Aside under the SBA program, meaning only small business concerns certified under the relevant federal guidelines are eligible to bid. The North American Industry Classification System code is 561910, indicating this is for support activities for transportation and logistics services. Performance of the contract is specifically located in Galveston, Texas, with a ZIP code of 77550, and the contracting activity falls under the General Services Administration’s Supply Chain Management Contracting Division within the GSA/FAS/GSS/QSCB office.
Packaging and Labeling Services

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 333111
Federal
Heavy-Duty Rotary Cutter Equipment SupplyThe contract is for the supply of a heavy-duty rotary cutter model Land Pride RCM5020, featuring a 1.5-inch cutting capacity, a durable 10-gauge steel deck, hinged wings for enhanced maneuverability, and a blade tip speed of approximately 18,165 feet per minute. This equipment is designed for demanding land clearing and maintenance applications, ensuring high performance and reliability in rough terrain conditions. The item is being procured under a total small business set-aside designation, which restricts eligibility exclusively to small businesses as defined by the SBA, aiming to promote economic opportunity within the small business community. The solicitation falls under NAICS code 333111, which classifies the manufacturing of agricultural, construction, and mining machinery, and is managed by the General Services Administration’s Supply Chain Management Contracting Division. The place of performance is designated as Galveston, Texas, with a zip code of 77550, indicating where the equipment will be delivered and deployed. Although no specific point of contact or solicitation number is provided, the contract opportunity is publicly accessible via the SAM.gov platform, and it was posted on May 7, 2026, aligning with typical federal procurement timelines for equipment acquisitions within federal agencies.
Farm Machinery and Equipment Manufacturing

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
Compliance and Certification ManagementThis subcontract opportunity focuses on providing support to the prime contractor in ensuring compliance with key regulatory requirements, specifically related to the Buy American Act, Trade Agreements Act, and anti-trafficking certifications as outlined in FAR and DFARS regulations. The contract falls under the Small Business Administration's Total Small Business Set-Aside program, indicating it is exclusively open to small business entities. The work will be performed primarily at Fort Bliss, with the contracting agency being the Supply Chain Management Contracting Division of the General Services Administration (GSA). The contract is categorized under NAICS code 541611, which pertains to administrative management and general management consulting services. Although the solicitation number and agency office address are not provided, the contract aims to support the prime contractor in navigating complex regulatory frameworks to ensure adherence throughout the supply chain process. The opportunity was posted in late April 2026 and emphasizes the importance of compliance management in government contracting processes, particularly in areas critical to federal procurement policy and ethical standards in labor practices.
Administrative Management and General Management Consulting Services

POSTED

6 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS