Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacture and Supply of MIL-PRF-6855F Nonmetallic Tubing

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of nonmetallic tubing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the extrusion or molding of synthetic rubber tubing in strict accordance with MIL-PRF-6855F(1) and MIL-PRF-6855/4A(1) standards. The contractor is responsible for performing First Article Testing as specified in MIL-R-6855E Table VII and maintaining full compliance with QAP 16236. The final delivery consists of 183 feet of tubing, which must be accompanied by a First Article Testing report and detailed shelf-life documentation. All materials must be packaged according to MIL-STD-2073-1E and MIL-STD-129 guidelines. The project falls under NAICS code 326150 and is associated with performance activities located in New Cumberland.

General Info

Manufacture and supply 183 feet of synthetic rubber tubing per MIL-PRF standards.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

326150 - Urethane and Other Foam Product (except Polystyrene) Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-1032.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBING, NONMETALLIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies nonmetallic tubing for prime contractors on DLA Weapons Support Fluid Handling Division projects. Extrudes or molds synthetic rubber tubing per MIL-PRF-6855F(1) and MIL-PRF-6855/4A(1), performs First Article Testing per MIL-R-6855E Table VII, and ensures compliance with QAP 16236. Packages per MIL-STD-2073-1E and MIL-STD-129. Delivers 183 feet of tubing with FAT report and shelf-life documentation.

Similar Contracts

Same NAICS industry code

Packaging Cushioning Material SupplierThis subcontract involves the supply of specialized packaging cushioning material for prime contractors working on Department of Defense projects under Construction and Equipment Containers. The supplier is required to provide eight units of material matching NSN 8145013533277, ensuring full compliance with MIL-STD-2073-1E and the DLA Packaging Requirements for Procurement RP001. The contract specifies a delivery timeline of 167 days with shipping terms set as FOB Origin. Performance for this requirement is centered in Tracy, California, under NAICS code 326150. Interested parties must have responded by the deadline of October 26, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Custom Protective Foam Inserts for Electric ContainersThis subcontract, issued by Construction and Equipment Containers for the Department of Defense, involves the fabrication and supply of 37 sets of custom-cut protective foam inserts. These inserts must be manufactured to P/N 14513 specifications to secure electric components within shipping containers for DLA Troop Support projects. The contractor is required to ensure that material density meets all technical requirements and that the foam blowing agents used contain no Class I ozone-depleting chemicals. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326150, with the place of performance located in Tracy, California. Interested parties must respond by October 26, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Supply of Polyimide Foam Thermal Insulation Blocks (NSN 5640-01-371-3262)This small business set-aside subcontract through the General Services Administration involves the manufacture and supply of open-cell polyimide foam thermal insulation blocks under NSN 5640-01-371-3262. The contractor is responsible for producing 200 Type II faced panels measuring 36.0 by 24.0 by 2.0 inches, featuring Class 1 fibrous glass cloth facing. All materials must strictly adhere to MIL-DTL-24688 Revision A Amendment 1 and QPL-24688 standards, and the provider must supply OSHA/GHS compliant Safety Data Sheets. The agreement specifies delivery of the units FOB Destination to Vista, California, with performance associated with the Kansas City area. Managed by the Supply Chain Management Contracting Division of the GSA/FAS/GSS/QSCB, the contract falls under NAICS code 326150. The solicitation period is brief, with a posting date of October 14, 2026, and a response deadline of October 20, 2026.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

NSN 5640013713262; INSULATION BLOCK, THERMAL

Solicitation # 47QSSC26Q7586

Solicitation 47QSSC26Q7586 is a brand name or equal procurement for 200 sheets of thermal insulation blocks under NSN 5640013713262. The required material must be an open-cell polyimide foam, Type II faced panel, Class 1 fibrous glass cloth faced, with nominal dimensions of 36.0 inches in length, 24.0 inches in width, and 2.0 inches in thickness. All products must comply with MIL-DTL-24688 Revision A Amendment 1 and QPL-24688. This is a total small business set-aside under NAICS 326150, and because it falls under the Simplified Acquisition Threshold, the nonmanufacturer rule does not apply. The contract is an all-or-none award based on the lowest evaluated price among responsible offerors who pass administrative and technical acceptability screenings. To be considered valid, quotes must include the completed Request for Quote document and the MIL STD 129R compliance form submitted via email to the designated point of contact. Delivery is FOB Destination, CONUS, with a primary shipping location in Vista, California. Strict adherence to packaging and marking standards is required, including MIL-STD-129R for military deliveries and the provision of OSHA/GHS compliant Safety Data Sheets with each transport package.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

Sound Controlling Boards

Solicitation # 47QSSC-26-Q-0266

The General Services Administration, Supply Chain Management Contracting Service Center, is soliciting quotes for the procurement of 395 sheets of Sound Controlling Board under solicitation 47QSSC-26-Q-0266. The required materials must be new, open-cell polyimide foam faced panels (Type II, Class 2) measuring 48.0 by 24.0 by 1.5 inches, conforming to MIL-DTL-24688 Revision A Amendment 1 and QPL-24688. Delivery is required within the Continental United States to Norfolk, Virginia, and must comply with MIL-STD-129R marking and labeling standards, as well as GSAM provision 552.211-73. This is not a small business set-aside, though HUBZone price evaluation preferences apply. Award will be based on the Lowest Price Technically Acceptable (LPTA) mechanism. To be eligible, vendors must be registered for Purchase Orders via EDI or the OMS Vendor Portal and submit all technical specifications and completed administrative forms via email to kristi.riley@gsa.gov by October 19, 2026, at 5:00 PM EDT. Failure to complete all required administrative fields or provide technical specifications will result in the offer being excluded from further consideration.

Gsa/fas/gss/qscbd/assisted Contracting Branch B

POSTED

DEADLINE

O-Ring Fabrication and ManufacturingThis subcontract involves the fabrication and manufacturing of 19 high-precision, asbestos-free O-rings for the DLA Weapons Support Land Supply Chain. The components must be produced according to NSN 5331-01-455-7990 dimensions and RA001 technical requirements. Acceptable production methods include industrial rubber molding or machining, though additive manufacturing is strictly prohibited. The selected provider must maintain ITAR/EAR compliance and hold US/Canada Joint Certification Program certification. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

CUSHIONING MATERIAL

Solicitation # SPE8ED-27-T-0070

Solicitation SPE8ED-27-T-0070 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment Containers, for the procurement of two units of cushioning material (NSN 8135-01-280-2879). The contract requires delivery within 20 days after order, with shipping, inspection, and acceptance all occurring at the point of origin. Quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by October 19, 2026. The award process may be automated, and a price evaluation preference is available for certified HUBZone Small Business Concerns. The contractor must adhere to strict quality and security standards, including ISO 9001:2015 certification for the manufacturer's inspection system and compliance with CMMC Level 2 and NIST SP 800-171 for cybersecurity. Technical data associated with this item is subject to export control under ITAR or EAR regulations. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with specific requirements for shelf-life marking and hazardous material labeling per the Hazard Communication Standard. Additionally, the contract incorporates the Buy American and Balance of Payments Program, requiring disclosure for any non-domestic materials used.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Open Cell Foam Joint System Manufacturer/SupplierThis subcontract opportunity is for a manufacturer and supplier to provide a complete, integrated bridge joint system for prime contractors operating within the MoDOT St. Louis District. The scope of work involves the manufacture of cellular polyurethane foam impregnated with hydrophobic polymer and water-based emulsion, featuring a factory-applied fuel-resistant silicone coating. Additionally, the supplier is responsible for providing factory-fabricated watertight transition assemblies, ASTM C 881 epoxy adhesive primers, and ASTM D 5893 silicone sealant bands, with all components delivered directly to the designated MoDOT sites. The solicitation is categorized under NAICS code 326150 and was posted on October 6, 2026. Interested parties must submit their responses by the deadline of October 20, 2026, at 3:00 PM. This contract ensures that all critical materials for the bridge joint systems meet specific technical standards and are delivered as a comprehensive package to support infrastructure projects in Missouri.

MODOT ST LOUIS DISTRICT

POSTED

DEADLINE

Open Cell Foam Joint System

Solicitation # MODOT SL 0000000088SL

The Missouri Department of Transportation St. Louis District is soliciting bids for an Open Cell Foam Joint System under solicitation number MODOT SL 0000000088SL. The contract runs from the date of award through October 31, 2027, with options for two additional one-year extensions. The required system must be provided by a single manufacturer and consist of cellular polyurethane foam impregnated with 100 percent hydrophobic polymer and factory-coated with fuel-resistant silicone, field-applied epoxy adhesive primer meeting ASTM C 881, and field-applied silicone sealant bands meeting ASTM D 5893. The system must maintain a temperature service range of -40 to 185 degrees Fahrenheit and offer a working range of 50 percent in both tension and compression. Awards will be granted to the lowest and best bid that complies with all mandatory specifications and Missouri statutes, utilizing a multiattribute scoring method. Bidders must submit their proposals via the MissouriBUYS portal or as sealed hard copies by October 20, 2026. Key requirements include compliance with the Domestic Products Procurement Act, with a 10 percent preference for U.S.-manufactured goods, and adherence to nondiscrimination and drug-free workplace laws. All pricing must be FOB destination freight prepaid, including all packing and handling charges. Payments will be made in arrears, and the state reserves the right to use a state purchasing card for transactions.

MODOT ST LOUIS DISTRICT

POSTED

DEADLINE

SEAT-VL URETHANE — 4820000543850 — N0010426QNE45

Solicitation # N0010426QNE45

Solicitation NO0014-26-Q-NE45, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a total small business set-aside for the procurement of Seat-VL Urethane (NSN 4820-00-054-3850). The material is designated as Special Emphasis Level I Scope of Certification material because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. The seats must be manufactured from MD71-GG Mearthane (Graphite Filled Urethane) by Mearthane Products Inc. and must adhere to strict chemical and mechanical properties, including specific hardness, tensile strength, and water absorption limits. The contract requires a one-year warranty from the date of delivery and a 120-day delivery window with FOB destination terms. The contractor must maintain a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025. Rigorous traceability is mandatory, requiring each seat to be permanently marked per MIL-STD-792 to link the part to its specific heat, lot, or batch certification data. Key deliverables include a Certificate of Compliance and material certification test reports, which must be submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Packaging and marking must strictly follow MIL-STD-2073-1 and MIL-STD-129 standards.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Engine Inlet Bellmouth Housing FabricationThis subcontract involves the fabrication of the Engine Inlet Bellmouth Housing, Male (Part Number: 4106AS0275), supporting prime contractors for the Navy NAWC PMA-262/MQ-4C Program Office. The project requires the use of urethane or specialized foam molding processes to engineer components specifically for the AE3007H Turbofan Engine Inlet, utilizing molding equipment designed for aircraft maintenance specialized equipment. Managed by the Navair Warfare Ctr Aircraft Division under the Department of Defense, the work is performed in Lakehurst. The opportunity was posted on September 2, 2026, with a response deadline of November 1, 2026, and falls under NAICS code 326150.

Navair Warfare Ctr Aircraft Division

POSTED

about 1 month ago

DEADLINE

Engine Inlet Bellmouth Housing, Male

Solicitation # N68335-26-R-1113

The Naval Air Warfare Center Aircraft Division, specifically the PMA-262/MQ-4C Program Office, is issuing a sources-sought request for information under solicitation number N68335-26-R-1113. The agency is seeking industry feedback and comments regarding the capability to manufacture the Engine Inlet Bellmouth Housing, Male, identified as part number 4106AS0275. Production must align with the Navy Technical Data Package and 3D CAD data file 3673310M01110-11. If the requirement is eventually awarded, the Navy intends to provide the existing part mold as Government Furnished Equipment during the period of performance. This request is for information and planning purposes only and does not constitute a formal solicitation or a promise of a future award. Interested parties must provide administrative details, company experience, technical manufacturing information, and rough order of magnitude pricing and schedules for quantities of one, five to ten, and twenty or more units. The response deadline is November 1, 2026. The project falls under NAICS code 326150 and is associated with the Department of Defense, with the place of performance located in Lakehurst, New Jersey. Amendment 0001 was issued specifically to update the time zone in the RFI attachment.

Navair Warfare Ctr Aircraft Division

POSTED

about 1 month ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

MIL-SPEC Aerospace Packaging and MarkingThis subcontract for MIL-SPEC Aerospace Packaging and Marking supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The contractor is responsible for providing specialized packaging and marking services for critical aviation components and tube assemblies intended for prime contractors. All work must strictly adhere to ASTM D3951 and RP001 packaging standards, with marking and labeling performed according to MIL-STD-129 to ensure all items are shipment-ready for the DLA Distribution Depot Oklahoma. A primary technical requirement of the contract is the preservation of the oxygen-clean status of all assemblies during the packaging process. Performance will take place at Tinker AFB, Oklahoma. Interested parties must respond by October 26, 2026, regarding this requirement categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 13 hours ago

DEADLINE

Oxygen System Cleaning and Inspection ServicesThis subcontract for Oxygen System Cleaning and Inspection Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized cleaning and inspection of metal tube assemblies for prime contractors, ensuring that both interiors and exteriors are free of oils and particulates. All work must be performed in accordance with AF Drawing 8148650 for oxygen service, utilizing certified chemical degreasing systems or ultrasonic cleaners. The scope of work requires the delivery of certified oxygen-clean assemblies accompanied by detailed inspection reports. Performance will take place at Tinker AFB, zip code 73145-8000. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

Precision Metal Tube Assembly ManufacturingThis subcontract involves the fabrication of precision metal tube assemblies for oxygen life support equipment under the DLA Weapons Support Fluid Handling Division. The selected contractor will be responsible for the cutting, bending, and fitting of tubing in strict accordance with AF Drawing 8148650 to deliver assemblies identified by NSN 4710-00-344-3939. Performance of the work is located at Tinker AFB. To be eligible for this project, contractors must obtain Engineering Source Approval from the government design control activity and maintain CMMC Level 2 compliance. The opportunity is categorized under NAICS code 336413, with a response deadline set for October 26, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Nonmetallic Hose/Tubing Material SupplyThis subcontract opportunity is for the supply of raw nonmetallic tubing and hose materials to support prime contractors working with the DLA Weapons Support Fluid Handling Division. The selected provider must deliver high-grade polymers and elastomers that strictly adhere to the chemical and physical properties specified in drawing NR 78286 SS43. Because these materials are classified as Critical Safety Items, the contractor is required to provide comprehensive material certifications and full supply chain traceability. The project is designated as a Total Small Business Set-Aside under NAICS code 326220 and is managed by the Department of Defense. Performance for this contract will take place in San Diego, California. Interested parties must submit their responses by October 22, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 13 hours ago

DEADLINE

Military-Spec Packaging and Marking for Fluid Handling ComponentsThis subcontract involves providing packaging materials and performing final packing and marking services for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work requires the execution of packaging according to MIL-STD-2073-IE and marking per MIL-STD-129 to ensure a shelf life of 120 months. The project entails the delivery of 112,000 units to be distributed across DLA facilities in Jacksonville and San Diego. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561910. Performance will take place in San Diego, California. Interested parties must adhere to the response deadline of October 22, 2026, to be considered for this military-spec requirement.

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Nonmetallic Hose Assembly Fabrication (NSN 4720-01-289-6752)This subcontract involves the fabrication and assembly of 112,000 traceable nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The work must be performed in accordance with drawing NR 78286 SS43 Revision 14, as these components are designated as Navy Critical Safety Items. Performance of the contract will take place in San Diego, California. To be eligible, contractors must hold SAE AS9100 certification, CMMC Level 2 compliance, and approval from the US/Canada Joint Certification Program. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 326299. Interested parties must respond by October 22, 2026.

All Other Rubber Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The contractor is responsible for providing military-grade packaging, marking, and palletization for pistons intended for FOB Origin shipment. All work must be performed in Silverdale, Washington, and must strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical requirements include the application of preservation method 41, cleaning and drying level 1, and the use of wrap material LJ. The project is categorized under NAICS code 561910, with a response deadline set for October 26, 2026. The final deliverable is a fully processed piston that meets all specified military standards and is ready for transport.

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Precision Machined Piston (NSN 2040-01-056-1207)This subcontract involves the manufacture of one high-precision piston for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is required to utilize precision CNC machining to ensure the final product adheres to the technical data packages for NSN 2040-01-056-1207 and complies with the DLA Master List of Technical and Quality Requirements. The project mandates strict adherence to the Buy American Act and requires compliance with environmental regulations regarding mercury and ozone-depleting chemicals. Performance will take place in Silverdale, Washington, under NAICS code 332710, with a response deadline set for October 26, 2026.

POSTED

about 13 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports prime contractors delivering hardware to the DLA Weapons Support Fluid Handling Division. The scope of work involves the preservation, packaging, and marking of three Lower Rings, which must be delivered in unit and intermediate containers ready for shipment. All activities must strictly adhere to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking, while utilizing preservation method 33 and specific BG/C cushioning and dunnage. The project is managed under NAICS code 561910 and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of October 26, 2026, for this Department of Defense requirement.

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Precision Machining and Fabrication of Lower Rings (P/N 6455-4)This subcontract involves the precision machining and fabrication of three lower rings for the DLA Weapons Support Fluid Handling Division. The components must be manufactured to part number 6455-4 and NSN 5365012048039 specifications, with performance based on zero-based sampling according to MIL-STD-1916 or ASQ H1331 standards. The selected provider must hold SAE AS9003 or ISO 9001 certification and utilize RT001 compliant test equipment. Work is to be performed in Phoenix, Arizona, under NAICS code 332710, with a response deadline of October 26, 2026.

POSTED

about 13 hours ago

DEADLINE

Nonmetallic Hose Assembly Supplier (NSN 4720-00-994-5788)This subcontract involves the supply of 155 nonmetallic hose assemblies for Detroit Diesel Series 71 Engines, Type 174, supporting the DLA Weapons Support Fluid Handling Division. Each unit must feature a 0.312 inch inner diameter and a length of 28 inches. The items are to be delivered FOB Origin and must strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. The contractor is required to maintain compliance with the Buy American Act and DFARS 252.204-7012 regulations. This procurement falls under NAICS code 332912, with the place of performance located in New Cumberland. Interested parties must respond by October 26, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and FulfillmentThis subcontract involves providing specialized military packaging services for the Department of Defense, specifically for the DLA Weapons Support Fluid Handling Division. The scope of work requires the sealing of 848 O-rings in medium duty, waterproof, greaseproof, and opaque bags. All work must be performed using industrial sealing equipment in strict accordance with RP001, MIL-DTL-117, and MIL-STD-2073-1E packaging data guidelines. The completed items are to be delivered ready for shipment to DLA Distribution Warner Robins, with the place of performance located at Robins Air Force Base. The project is categorized under NAICS code 488410, with a response deadline set for October 26, 2026.

Motor Vehicle Towing

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS