This Government Contract opportunity from Department Of The Treasury was posted on January 20, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

DCB Industrial Shredder Maintenance Services - Nickel & Aluminum Nylo

Closed

2031ZA23R0009Federal

Submission Closed02/10/2023, 09:05:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

The Earle C. Clements Job Corps Center, operated by Management & Training Corporation, is soliciting a lump sum fee-for-service contract for the comprehensive clutch replacement of a Kubota M8200 tractor located in Morganfield, Kentucky. The scope of work requires the contractor to provide all labor, materials, tools, and transportation to disassemble the tractor, inspect and replace the clutch friction discs, plates, bearings, oil seals, and O-rings, and resurface the flywheel. Additionally, the contractor must replace necessary hydraulic pipes, flanges, and oil filters, verify PTO clutch operation, and perform final testing to ensure the unit is safe and fully operational according to manufacturer specifications and industry practices. This solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone certified entities, with a response deadline of November 3, 2026. Award will be based on best value. Applicants must provide a Unique Entity ID, Tax ID, and DUNS number via the MTC Supplier Self-Certification form. The contract incorporates several federal regulations, including FAR 52.222-4 regarding overtime compensation, FAR 52.222-50 regarding trafficking in persons, and FAR 52.209-6 for subcontractor debarment disclosure for amounts exceeding 45,000 dollars. Contractors are also required to provide proof of insurance and adhere to strict security and confidentiality protocols regarding non-public information.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 21, 2026, with a response deadline set for November 4, 2026. Interested parties must submit their responses by 7:00 PM on the closing date via the official supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Industrial Fluid Cooler Repair and Overhaul

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

MIL-STD-1330 Precision Cleaning ProviderThis subcontract opportunity is for a precision cleaning provider to support prime contractors on projects for the Department of Defense agency SPRMM1 DLA Mechanicsburg. The selected provider will be responsible for executing specialized Oxygen Clean processes on power supply components used in shipboard systems involving Oxygen, Helium, Helium-Oxygen, Nitrogen, and Hydrogen. All work must be performed using chemical cleaning equipment or clean-room facilities that strictly adhere to MIL-STD-1330 standards to ensure the delivery of certified power supply units. The requirement falls under NAICS code 811310 and was posted on October 21, 2026. Interested parties must submit their responses by the deadline of November 20, 2026, at 8:30 PM. This contract focuses on high-specification technical cleaning to maintain the safety and integrity of critical naval power supply systems.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Generators Testing, Maintenance, Repair, And Emergency Response

Solicitation # 20261021018

POSTED

DEADLINE

Electrical Distribution Equipment SpecialistThis subcontract for an Electrical Distribution Equipment Specialist involves performing operational testing and preventive maintenance on high-voltage distribution components at Oak Ridge National Laboratory. The scope of work focuses on 13.8 kV and 2400 V systems, specifically targeting the maintenance and testing of capacitor banks, reclosers, and switches. All activities must be executed using high-voltage diagnostic tools in strict accordance with OEM specifications, IEEE standards, and NFPA 70E safety guidelines. The selected provider will support prime contractors on Department of Energy projects managed by ORNL UT-Battelle LLC. Key deliverables for this engagement include the submission of detailed maintenance logs and comprehensive testing reports to ensure system reliability and compliance. The opportunity is categorized under NAICS code 811310.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Kubota M8200 Clutch Assembly Repair and InstallationThis subcontract opportunity involves the full mechanical disassembly, repair, and reassembly of the clutch system for a Kubota M8200 tractor at the Earle C. Clements Job Corps Center. The scope of work includes replacing critical components such as friction discs, plates, bearings, oil seals, O-rings, hydraulic pipes, and flanges. To ensure the equipment is fully operational, the contractor must perform PTO adjustments and operational testing in strict accordance with Kubota manufacturer specifications. The project is designated as a small business set-aside, welcoming applications from SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 3, 2026. The contract falls under NAICS code 811310 and is intended for prime contractors supporting projects at the Job Corps Center.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Elevator Maintenance, Inspection, and RepairThis subcontract for Elevator Maintenance, Inspection, and Repair involves providing on-call maintenance, statutory inspections, and repairs for prime contractors on municipal projects within the Town of Dracut, Massachusetts. The scope of work includes monthly preventative maintenance, safety and compliance inspections, and corrective repairs across four specific sites to ensure all elevator systems remain certified and operational. Qualified providers must hold the necessary state and local licenses for elevator service in Massachusetts. The contract requires the delivery of fully maintained systems and detailed inspection reports. Interested parties should note the response deadline of November 4, 2026, for this project located in Dracut.

POSTED

DEADLINE

Request for Quote 2027-6 Elevator Miant, inspect and repairs

Solicitation # BD-27-1237-DTH00-DT001-134559

The Town of Dracut is soliciting written quotes for solicitation number BD-27-1237-DTH00-DT001-134559 to provide on-call elevator inspections, maintenance, and repairs for four locations within the town. The scope of work includes performing monthly maintenance on all elevators at these sites, conducting all statutorily required inspections, and providing repairs on an as-needed basis. This open market solicitation was posted on October 21, 2026, with a response deadline of November 4, 2026, at 4:00 PM. Administrative inquiries and quotes should be directed to the Purchaser, Barbara O'Connor, at 62 Arlington Street, Dracut, MA 01826. Electronic quotes are not permitted. Invoicing for the services should be billed to Ann Vandal at the same Arlington Street address. While the project is defined by its specific maintenance and inspection deliverables across four locations, the total contract value and specific period of performance were not disclosed in the solicitation metadata.

POSTED

DEADLINE

26FS0006 - Chiller Maintenance Services

Solicitation # 26FS0006

The California Department of Veterans Affairs is soliciting bids for chiller maintenance services at the Veterans Home of California in Fresno. The scope of work includes quarterly preventive maintenance for chillers, annual full-service maintenance for cooling towers and Liebert units, and a one-time evaporator tube cleaning and eddy current testing service. The contractor is required to provide annual leak checks with AQMD reports, yearly oil sample lab analysis, and technical support for plant staff on fault diagnosis and alarm resets. Emergency repair requests require a response within two hours of notification. All work must comply with federal, state, and local regulations, including California Code of Regulations Titles 17, 19, and 22, as well as Title 8 safety orders and the Clean Air Act. The contract will be awarded to the lowest responsive and responsible bidder, with specific price incentives and tie-breaking preferences available for certified Small Businesses and Disabled Veteran Business Enterprises. Bids must be submitted via email to Eric Dahmen by November 3, 2026, at 5:00 PM, following strict subject line and body text requirements. Performance is scheduled for standard business hours, Monday through Friday, 8 a.m. to 4 p.m. The agreement is classified as public work, making general prevailing wage rates applicable. Contractors must provide a qualified onsite supervisor and adhere to the facility's security and check-in procedures. Required submission documents include the Bidder's Checklist, certification sheets, and various state declarations regarding civil rights and drug-free workplaces.

California Department of Veterans Affairs

POSTED

DEADLINE

Preventive Maintenance for Rotary Screw Compressors and Vacuum SystemsThis subcontract involves providing preventive maintenance services for prime contractors on California Department of Public Health facility projects located at the Richmond Campus. The scope of work focuses on the upkeep of two Model KNWAO-BX Rotary Screw Air Compressor Systems, two air dryers, two ASME-rated compressed air storage tanks, and one vacuum pump system. All pressure vessel inspections must be conducted in accordance with ASME standards to ensure a fully operational system and the delivery of completed maintenance logs. The opportunity is categorized under NAICS code 811310 and was posted on October 20, 2026, with a response deadline of November 10, 2026. Interested parties can find further details through the Cal eProcure portal.

California Department of Public Health

POSTED

DEADLINE

Invitation for Bid (IFB) 26-10284 Air Compressor Maintenance

Solicitation # 26-10284

The California Department of Public Health (CDPH) is soliciting bids under Invitation for Bid 26-10284 for comprehensive air compressor maintenance services at the CDPH Richmond Campus in Richmond, California. The selected contractor will be responsible for providing all parts, labor, and materials for the preventive maintenance of two rotary screw air compressor systems (Model KNWAO-BX), two air dryers, two ASME-rated compressed air storage tanks, and one AirTech vacuum pump system. The scope of work includes quarterly and annual maintenance, with a requirement for emergency repair response times within 24 hours of a call. Key deliverables include equipment verification during the first visit, service documentation submitted within five business days of each visit, and a comprehensive vacuum system performance report during annual maintenance. The contract will be awarded to the lowest responsive and responsible bidder, with a tie-breaking process involving a coin toss. Bidders must meet specific minimum qualifications, provide a valid California business license, and adhere to a mandatory 3-percent Disabled Veteran Business Enterprise (DVBE) participation requirement for contracts exceeding 5,000 dollars. Required submissions include a detailed narrative response to the scope of work, a completed cost worksheet, bidder references, and various state certifications including the STD 204 Payee Data Record and the Darfur Contracting Act form. All work must comply with OEM specifications and Department of General Services standards, and any use of generative AI in the proposal must be disclosed to avoid disqualification.

California Department of Public Health

POSTED

about 17 hours ago

DEADLINE

in 20 days

General Info

Agency

Department Of The Treasury → Bureau Of Engraving And Printing

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Washington, DC, 20228, USA

Set-Aside

NONE

Documents

2031ZA23R00009_0_US+%281%29.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJan 20

special-notice

Response DeadlineFeb 10

Deadline has passed

Submission Closed

02/10/2023, 09:05:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of The Treasury → Bureau Of Engraving And Printing

Contacts2 people available

OfficeN/A

Organization / AgencyDepartment Of The Treasury → Bureau Of Engraving And Printing

Office AddressN/A

Contacts

Frederick Porter

contact@example.gov

Angel Walls

contact@example.gov

Full Description

Solicitation Number: 2031ZA23R0009 Notice Type: Combined Synopsis/Solicitation This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 and FAR Part 13.5, Simplified Procedures for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is 2031ZA23R00009 and is issued as Request for Proposal (RFP). Under this requirement, the Bureau of Engraving and Printing (BEP) intends to award a commercial, Firm Fixed Price (FFP) contract for DCB Industrial Shredder Maintenance Services - Nickel & Aluminum Nylo at BEP's District of Columbia (DCF) Currency Facility as defined in the Performance Work Statement (PWS). In accordance with the attached PWS, Terms and Conditions, the BEP will only consider a single-award with Firm Fixed Price contract with the Period of Performance of a base plus four option periods. This procurement shall be conducted in accordance with Federal Acquisition Regulation (FAR) Parts 12 & 13. The North American Industry Classification System (NAICS) code is 811310. Any questions the Contractor has shall immediately be directed to the Contracting Officer, Frederick Porter via email: Frederick.portor@bep.gov or Contract Specialist, Angel Walls via email: angel.walls@bep.gov . NOTICE TO OFFERORS ALL PROPOSALS ARE DUE BY 4:00 P.M. EASTERN TIME ON 10 FEBRUARY 2023. SUBMISSIONS SHALL BE SUBMITTED VIA EMAIL AT angel.walls@bep.gov. SECTION B -SUPPLIES OR SERVICES AND PRICES/COSTS OF THE 1449 SHALL BE COMPLETED. PLEASE REVIEW IN ITS ENTIRETY 3. INITIAL QUESTIONS REGARDING THIS SOLICITATION ARE DUE BY 11:00 A.M. EST ON 27 JANUARY 2023 TO angel.walls@bep.gov. ATTACHMENTS *SF 1449