DD FORM 1577-2, UNSERVICEABLE (REPAIRABLE) TAG - MATERIEL

Digital Printing Not Acceptable Print in fade proof and weather resistant inks. Tags will be attached to equipment stored in open and exposed to sun, light, heat, cold, and elements. Ink coverages must be uniform. Prints in Pantone 355 Green. Print face and back with approximately 25% ink coverage each side. Face prints with type and rule matter within a solid border which bleeds all sides and contains one reversed typeline. Back prints an approximately 5 x 1" solid rectangular panel (to be created by contractor) panel is not provided on the print file. CONSTRUCTION: Drill one round hole 3/16" diameter. Center of hole is to be 3/8" from left patch end of tag, centered in the 3-1/8" dimension. Reinforce the hole on both sides with a 5/8" hard fiber patch and RUSTPROOF METAL EYELET and insert a piece of 12" cotton with string double loop. Angle cut (45 degrees) both corners at the patch end. Shrink-wrap in 100s and pack 36 packs of 100 per carton to equal 3,600 tags per carton.