Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

DEHYDRATOR UNIT, NONREA

Active
SPE8E9-26-T-3192Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of a single dehydrator unit, nonreactivating, identified by NSN 4440011243552 and part number 10262-10L, under solicitation SPE8E9-26-T-3192. The unit must comply with all applicable DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the governing revision determined by the solicitation or award date depending on acquisition size. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific approved uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA, with portable fluorescent lamps and instruments required to be shockproof and contain a secondary mercury containment barrier per NAVSEA 5100-003D. All packaging must adhere to MIL-STD-2073-1E, with unit packaging code U, preservation method 10, and marking in compliance with MIL-STD-129 and no special marking code. The unit must be palletized per DLA packaging requirements and shipped FOB origin to Robins Air Force Base, Georgia, with delivery required within 156 days of contract award, no quantity variance allowed, and inspection and acceptance occurring at destination. The need ship date is January 4, 2027, with an original required delivery date of April 6, 2027. All transport logistics are governed by DLAD procedural notes C19 and C20. The contracting office is the Department of Defense via Construction & Equipment MRO Service I, with Matthew Kruc as the point of contact.

General Info

Procure one nonreactivating dehydrator NSN 4440011243552, deliver FOB origin to Robins AFB by April 6, 2027, per MIL-STD and DLA specs.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E9-26-T-3192 for DLA Troop Support Construction & Equipment MRO

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DEHYDRATOR UNIT,NONREACTIVATING
DEHYDRATOR UNIT, NONREACTIVATING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
COOPER INTERCONNECT, INC. 99447 P/N 10262-10L
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017423183 0001 AY 1.000
NSN/MATERIAL:4440011243552
SPE8E9-26-T-3192
SECTION B
PR: 7017423183 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0156
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:C
UNIT CONT:F2 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:01/04/2027 Original Required Delivery Date:04/06/2027
SPE8E9-26-T-3192 NSN/Part Number: 4440-01-124-3552 Quantity: 1 AY Purchase Request: 7017423183QTY: 1 Delivery: 156 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333415
New
SLED
High-Efficiency Condensing Boiler SupplyThe contract calls for the supply of two new high-efficiency condensing boilers that must comply with both AHRI standards and the manufacturer’s technical specifications. All equipment must be brand new, unused, and delivered with complete submittal data including performance certifications, installation manuals, and warranty details. The boilers are intended for use in a project managed by the state of Utah under a subcontract classification, with no specific set-aside provisions applied. The solicitation was posted on July 20, 2026, and responses are due by August 10, 2026. The North American Industry Classification System code 333415 indicates the focus on heating equipment manufacturing. The place of performance and detailed contact information are not specified, but interested parties can access further details through the provided Utah BonfireHub link. Suppliers must ensure full compliance with all technical and documentation requirements to be considered for award.
Utah

POSTED

about 20 hours ago

DEADLINE

in 20 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIRThe contract is for one air filter element, part number L-MHK00033 or L-MML00104, supplied by Universal Air Filter Co, with NSN 4130-01-628-6983, to be delivered in a single unit within 20 days FOB destination. All packaging must comply with MIL-STD-2073-1E, including preservative methods, wrapping, and container specifications, and marking must follow MIL-STD-129 with no special marking codes applied. Palletization adheres to DLA’s packaging requirements, and the delivery is required to the USS SAN ANTONIO LPD 17 at FPO AE 09587, via vessel shipment under DLA Procedure Notes C19 and C20. Inspection and acceptance occur at the destination with zero tolerance for quantity variance. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE8E8-26-T-4624, with a required delivery date of July 2, 2026, and is managed by the Defense Logistics Agency under NAICS code 333415, with primary point of contact Alexis Selby.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333415
New
DIBBS
AIR CONDITIONERThe contract specifies the procurement of one air conditioner unit with NSN 4120-01-640-6307 and part number 865M09, under solicitation SPE8E8-26-T-4701, for a quantity of 13 units at a unit price of $13.00, totaling $169.00. Delivery is required FOB origin within 167 days from the contract date, with inspection and acceptance occurring at the destination. The supplier must comply with all DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must meet MIL-STD-129 for marking and labeling and adhere to RP001 DLA Packaging Requirements, including palletization standards. The unit of issue is each, with zero variance allowed in quantity. The shipment must be delivered to the DDSP New Cumberland Facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with a need ship date of January 4, 2027, and an original required delivery date of October 11, 2026. Transportation and shipping instructions are guided by DLAD Proc Notes C19 and C20. The contract is issued under a federal solicitation with NAICS code 333415, managed by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Alexis Selby.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333415
New
DIBBS
COOLER UNIT, AIRThe contract solicitation SPE8E8-26-T-4721 seeks the procurement of four air cooler units identified by NSN 4130012281301 under a fixed-price, non-commercial simplified acquisition. The item must be delivered FOB origin within 153 days after receipt of order, with a required delivery date of June 7, 2027, and a need ship date of December 21, 2026. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must strictly conform to MIL-STD-2073-1E, using clean and dry preservation methods, and marking must comply with MIL-STD-129, including machine-readable barcodes and no special markings required. The contractor must adhere to DLA’s RP001 packaging requirements and ensure no mercury or mercury-containing compounds are intentionally added to the unit, except for functional uses in batteries, fluorescent lamps, sensors, or instrument controls, which must be shockproof with a secondary containment layer per NAVSEA 5100-003D. The contract incorporates numerous FAR and DFARS clauses governing labor, security, hazardous materials, and compliance, including mandatory requirements for employment eligibility verification, combating trafficking in persons, sustainable products, safeguarding covered defense information per NIST SP 800-171, and prohibitions on hexavalent chromium and covered defense telecommunications equipment. Payment must be processed electronically through WAWF, and contractors are required to register and complete training for this system. Solicitation responses must be submitted via DIBBS by July 23, 2026, with awards following a Low-Price Technically Acceptable (LPTA) evaluation methodology where technical acceptability is a threshold and price is the primary determinant. Offerors must affirm their small business status and provide UEI and CAGE codes where applicable, and all technical and quality requirements referenced by R or I numbers must be drawn from the current DLA Master List of Technical and Quality Requirements. The contract includes no option quantities or term extensions, and pricing details, while referenced in the CLIN, are not disclosed in the solicitation, suggesting award will be based on competitive pricing submitted in response to the solicitation.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333415
New
DIBBS
REPLACEMENT DESCALERJAL Enterprises, Inc. is contracted to supply 26 units of Replacement Descaler with NSN 4130-01-389-5188 and part number DC600R under contract SPE8E8-26-T-4675. The unit price is $26.00 per unit, with a total contract value of $676.00. Delivery is required within 16 days of award, FOB origin, with no tolerance for variance in quantity. Goods must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129, using packaging code U and no special marking. The items must be palletized per DLA packaging requirements and shipped to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The contract prohibits intentional addition of mercury or mercury-containing compounds to the hardware or supplies, with exceptions limited to functional uses in batteries, fluorescent lights, instrument sensors, weapon systems, or Navsea-specified chemical reagents; portable items containing mercury must include shockproof design and a secondary containment boundary consistent with NAVSEA 5100-003D. Inspection and acceptance occur upon delivery at the destination, and transportation logistics follow DLAD Proc Note C19 and C20. The required delivery date is August 17, 2026, though a need ship date of March 6, 2026, is specified. The solicitation was posted July 20, 2026, with a response deadline of July 23, 2026, under NAICS code 333415, representing industrial machinery manufacturing.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIRThe contract is for the procurement of nine air filter elements identified by NSN 4130014126439 and part number 386A8022-3 under solicitation SPE8E8-26-T-4767, issued by the Department of Defense through the DDSP New Cumberland Facility. The contract is a firm-fixed-price, simplified acquisition with a total value of $81.00, requiring delivery in 156 days after award, with the original required delivery date set for July 9, 2027, and a need ship date of January 4, 2027. Delivery is FOB origin to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with both inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including dry preservation, unit packaging with D3 containers, and no chemical preservatives. Marking and labeling conform to MIL-STD-129 with 2D Data Matrix barcodes and no special marking required. The item must be free of intentional mercury or mercury compounds except in specified exceptions like batteries, fluorescent lights, and sensors, with portable mercury devices requiring shockproof construction and a second containment barrier per NAVSEA 5100-003D. All hazardous materials must be labeled per OSHA HazCom and MIL-STD-129, with samples submitted prior to award. The contract mandates full compliance with DLA’s Master List of Technical and Quality Requirements referenced via R or I numbers, and includes clauses on equal opportunity, trafficking in persons, employment verification, sustainable products, cybersecurity safeguards, and accelerated payments to small business subcontractors. Offerors must provide a Unique Entity Identifier and CAGE code, and self-certify size status and socioeconomic designations if applicable. Proposals must be submitted electronically via DIBBS by July 31, 2026, with invoicing conducted through Wide Area WorkFlow. The government retains inspection and acceptance authority at delivery, and no changes or variations in quantity are permitted.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333415
New
DIBBS
MUFFLER, DISCHARGE LThe contract specifies the procurement of one unit of a MUFFLER, DISCHARGE L with NSN 4130-01-513-5907 under solicitation SPE8E8-26-T-4761, issued by the Defense Logistics Agency. Delivery is required within five days of order placement, FOB origin, with inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, adhering to DLA Packaging Requirements for Procurement, including palletization and labeling guidelines. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents explicitly authorized by NAVSEA; portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards. The delivery address is FPO AP 96322-1400, with the final destination being US Naval Base Sasebo, Japan, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The required delivery date is July 17, 2026, and the contract stipulates zero variance in quantity.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR, REFRIGERThis contract specifies the procurement of two refrigeration compressors with part number 364-50107-000 and NSN 4130015125984 under solicitation SPE8E8-26-T-4768. The delivery is required within 142 days of contract award, with shipment originating FOB origin and no tolerance allowed for quantity variance. All units must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including the use of the specified packaging code U and interior packaging methods, and must be palletized according to DLA packaging standards. The delivery destination is the DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and the required ship date is December 21, 2026, with an original delivery deadline of January 21, 2027. Inspection and acceptance occur at the destination point, and transportation procedures must follow DLAD Proc Note C19 and C20. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or any direct contact with the supplied compressors, except for functional uses in batteries, fluorescent lamps, specified instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary as per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions. The contract is managed under NAICS code 333415 by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Alexis Selby. The unit of issue is each, with a total price of $2.00 per unit for a combined total of $4.00.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIR CONThe contract pertains to the procurement of air conditioning filter elements, specifically identified by part numbers 906938 and N11AF-SS316L-F from AIRSAN CORPORATION, with the NSN 4130-01-651-1506. Five units are required at a unit price of $5.00, with a total value of $25.00, under solicitation SPE8E8-26-T-4680. Delivery is mandated within 167 days from the award date, with shipment FOB origin, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. All packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container types, and unit packaging details, and all marking must adhere to MIL-STD-129 with no special marking codes applied. The items must be palletized according to DLA’s packaging requirements, and the delivery point is the designated receiving warehouse in Tracy, California, with the same location used for freight shipping. The need ship date is January 4, 2027, and the original delivery deadline is February 26, 2027. Technical and quality standards referenced via R and I numbers are governed by the DLA Master List, with compliance controlled by the revision in effect at the time of solicitation or award, depending on acquisition type. Transportation logistics are governed by DLAD Proc Notes C19 and C20, and the unit of issue aligns with ANSI X12 standards as defined by DLA. The contract is issued by the Department of Defense through DLA San Joaquin, with Alexis Selby as the primary point of contact.
DLA DIST SAN JOAQUIN

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333415
New
DIBBS
HEAT INTERCHANGER, RThe contract is for the procurement of four heat exchangers for refrigerant use, identified by part number A71-D2416 and NSN 4130-01-365-2740, to be delivered in a single lot of four units. Delivery is required within 249 days from the contract award date, with FOB origin terms and inspection and acceptance occurring at the destination. The items must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s procurement requirements, which include avoiding the use of plastics for wrapping, cushioning, or dunnage whenever possible. The item is designated as a critical application item with specific quality and technical standards incorporated by reference from the DLA Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents designated by NAVSEA; portable devices containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. All supplies must be delivered to the designated DLA Distribution facility at New Cumberland, Pennsylvania, with the original required delivery date set for September 10, 2027, although the need ship date is February 18, 2025. The contract is issued under solicitation SPE8E8-26-T-4626 with a unit price of $4.00 per unit, totaling $16.00, and falls under NAICS code 333415 for industrial machinery and equipment manufacturing.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333415
New
Federal
New Reach-In Display RefrigeratorsThis procurement is for two 2-section reach-in display refrigerators, specifically the Traulsen Model RHT232DUT-FHG or an approved equal product, to be delivered to the Puget Sound VAMC in Seattle, Washington, under a firm-fixed price purchase order utilizing Simplified Acquisition Procedures per FAR 12. The solicitation is exclusively set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 333415, and only certified SDVOSBs listed in the SBA database are eligible to respond. All submissions must be completed on Standard Form 1449, accompanied by a filled-out Price/Cost Schedule, documentation proving that any equal product meets all listed salient characteristics, and a fully executed VAAR 852.219-76 Limitations on Subcontracting form. The refrigerators must comply with NSF and FDA standards, be constructed using FDA-approved materials, and include two user manuals and two service manuals, preferably delivered electronically. All items must be packaged to ensure safe delivery by common carriers and conform to carrier regulations based on the transportation method used. Responses are due by July 21, 2026, at 11:00 PM Pacific Time and must be submitted via email to Nicholas.Heintz@va.gov; no late submissions will be accepted. Offerors must maintain firm pricing for 30 calendar days after the deadline and must have current, accurate annual representations and certifications in SAM, including a valid Unique Entity Identifier and CAGE code. Evaluation will be based on technical compliance with all salient characteristics and past performance, which together are more important than price, with award going to the most advantageous offer to the government. The contractor must comply with all applicable federal statutes including Buy American, Kickbacks, Contract Work Hours and Safety Standards, and Combating Trafficking in Persons, and must submit electronic invoices within the requirements of VAAR 852.232-72 and 52.232-33 upon inspection and acceptance. Delivery must be completed within 90 days after the award, and the government retains the right to inspect, test, reject, or require repair or replacement of nonconforming items at no additional cost, with post-acceptance rights exercisable within a reasonable time after defect discovery.
260-NETWORK Contract Office 20 (36C260)

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 333415
New
Federal
FreezerThe contract is for a walk-in freezer under solicitation number W911S26U3741, issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is a Total Small Business Set-Aside, meaning only small businesses certified under the Small Business Administration can respond, and the NAICS code 333415 indicates the primary focus is on commercial and industrial refrigeration and conditioning equipment manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 24, 2026, at 3:00 PM Eastern Time. The place of performance is listed with a zip code of 71459, though the specific city and state are not provided. The primary point of contact for inquiries is Dakota Moore, reachable by phone at 337-531-3834 or email at dakota.b.moore3.civ@army.mil. The contract is categorized as combined, suggesting it may include elements of both acquisition and service requirements. All responses must be submitted through the SAM.gov portal linked in the posting.
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance and Inspection ServicesThe contract seeks Quality Assurance and Inspection Services for aluminum sheets to ensure full compliance with specified material standards, including accurate alloy and temper identification, verified heat and lot traceability, and correct labeling and marking as required. All inspections must be conducted with precision to confirm that delivered materials meet contractual and technical specifications before acceptance, with documentation supporting each verification step to maintain traceability and accountability throughout the supply chain. This is a Total Small Business Set-Aside under the SBA program, designated under NAICS code 541330 for Architectural and Engineering Activities, and is issued by the Department of Defense through the Construction & Equipment MRO SVC I organization. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with performance expected to be carried out under the terms of a subcontract. Interested small businesses must submit proposals by the deadline to compete for this opportunity, which emphasizes rigorous adherence to quality control protocols and the ability to provide certified documentation of material compliance.
Engineering Services

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Shipment to DLA DestinationsThe contract involves the transportation of packaged aluminum sheets to two designated Department of Defense destinations: DLA Warner Robins in Georgia and Tinker Air Force Base in Oklahoma. Shipping is conducted under FOB Origin terms, meaning the buyer assumes all responsibility and costs for the goods once they leave the seller’s location. Invoicing must comply with the Wide Area WorkFlow system to ensure proper documentation and payment processing. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the Small Business Administration. The North American Industry Classification System code for this procurement is 484220, which corresponds to truck transportation of freight, excluding special commodities. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, and is issued under the Construction & Equipment MRO Svc I agency program managed by the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ComplianceThis contract requires strict adherence to OSHA-compliant hazard warning labels as mandated by DFARS 252.223-7001 and OSHA 29 CFR 1910.1200, ensuring all hazardous chemicals are properly labeled in accordance with federal workplace safety regulations. The scope centers on hazard communication and labeling compliance for supplies or services under a subcontract, where accurate and standardized labeling is critical to worker safety and regulatory alignment. All labeled materials must reflect current GHS standards for chemical hazard classification, signal words, pictograms, precautionary statements, and supplier information. The contract is designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility to small businesses as defined by the NAICS code 541690, which covers other scientific and technical consulting services. It was posted on July 20, 2026, with responses due by July 27, 2026, and falls under the Department of Defense's Construction & Equipment MRO SVC I procurement category. Performance location details are unspecified, but compliance must meet federal requirements regardless of site. Participation requires a thorough understanding of both OSHA and DFARS labeling obligations to ensure full regulatory compliance and avoid contract noncompliance penalties.
Other Scientific and Technical Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Preservation, Packaging, and Marking ServicesThe contract seeks subcontractor services for the preservation, packaging, and marking of aluminum sheets in accordance with military standards, requiring specific processes including drying, edge protection, fiberboard wrapping, and adherence to MIL-STD-129 labeling with the code 'ZZ'. All work must meet stringent defense requirements to ensure product integrity during storage and transport. The solicitation is restricted to small businesses under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, with the North American Industry Classification System code 493190 indicating warehousing and storage services. The opportunity is issued under the Department of Defense’s Construction & Equipment MRO SVC I program, with responses due by July 27, 2026, and was posted on July 20, 2026. Performance location details are unspecified, and interested parties must access the full solicitation through the DIBBS portal using the provided link.
Other Warehousing and Storage

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Alclad Metal Sheet SupplyThe contract calls for the supply of 600 aluminum alclad sheets measuring 0.032 inches thick by 48 inches by 144 inches, manufactured from alloy 2024-T3 and fully compliant with SAE AMS4462B and applicable military specifications. These materials are intended for specialized defense applications requiring high strength-to-weight ratios and corrosion resistance, typical of aerospace and defense system manufacturing. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing compliance with FAR 19.5 guidelines. The North American Industry Classification System code 331315 identifies the relevant industry as aluminum rolling, drawing, and extruding, ensuring the offeror possesses appropriate industrial capability. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a one-week window for submission. The contract falls under the Department of Defense, specifically managed by the Construction & Equipment MRO SVC I organization, indicating the end-use is for maintenance, repair, and overhaul of military equipment. While no specific delivery location or point of contact is listed, performance is expected to support U.S. defense infrastructure, with all materials required to meet stringent defense quality standards. Interested parties must access the official solicitation portal via the provided DIBBS link to review full technical requirements and formal submission instructions.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Material Handling and SDS SubmissionThe contract requires strict compliance with the identification, handling, and labeling of hazardous materials in accordance with DFARS 252.223-7001 and MIL-STD-129 standards. All hazardous substances must be properly documented with corresponding Safety Data Sheets submitted as part of the delivery and packaging process, ensuring full regulatory alignment and operational safety throughout the supply chain. The scope encompasses end-to-end management of hazardous material protocols, from initial recognition through final shipment, with an emphasis on accuracy in labeling and timely SDS submission to meet Department of Defense requirements. This subcontract, posted on July 20, 2026, with a response deadline of July 27, 2026, falls under NAICS code 562910 for other remediation services and is administered by the Department of Defense under the Construction & Equipment MRO SVC I contract vehicle. The place of performance and specific office details are not provided, but all work must adhere to federal military standards for hazardous material logistics. Interested parties must respond by the deadline through the DIBBS portal to be considered for award.
Remediation Services

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Certificate of Quality and Mill Certification ServicesThe contract requires the generation and submission of a Certificate of Quality alongside comprehensive mill-material traceability documentation for all supplied materials. This includes detailed reporting of heat and lot numbers, specific alloy grade, temper designation, and confirmation of compliance with applicable ASTM and SAE standards. All documentation must be accurate, complete, and verifiable to ensure material integrity and regulatory alignment throughout the supply chain. The service is being procured as a subcontract under the NAICS code 541380, with the Department of Defense through its Construction & Equipment MRO SVC I office acting as the contracting entity. Responses must be submitted by the deadline of July 27, 2026, and the work must adhere strictly to the technical requirements outlined to meet military-grade material assurance protocols.
Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 323111
New
DIBBS
Marking and Labeling ServicesThe contract requires permanent marking of aluminum plates in strict compliance with MIL-STD-129 and ASTM B666 standards, ensuring traceability and regulatory adherence for defense-related applications. Marking must include critical identifiers such as the National Stock Number, alloy designation, heat or lot number, dimensions, and applicable specifications, using approved methods including stamping, stenciling, or adhesive labels. All markings must be durable, legible, and resistant to environmental degradation to meet military durability requirements. This is a subcontract solicitation issued under NAICS code 323111 for printing and related support activities, managed by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I organization. The solicitation is open for responses from July 20, 2026, with a firm deadline for submissions on July 27, 2026. The place of performance and point of contact details are not specified, but adherence to the technical standards and submission timeline is mandatory for consideration. Interested parties must ensure full compliance with the marking methods and data requirements outlined in the referenced military and material specifications.
Commercial Printing (except Screen and Books)

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 385110
New
DIBBS
Packaging and Preservation ServicesThe contract entails the packaging and preservation of aluminum plates in strict accordance with military standards MIL-STD-2073-1E and material specification ASTM B660-23, ensuring compliance with defense-grade requirements for handling and storage. The work includes specific preservation method ZZ, which involves detailed cleaning and thorough drying procedures to prevent corrosion and contamination, followed by proper palletization to ensure secure transport and long-term integrity. All processes must meet the rigorous environmental and quality controls mandated by the Department of Defense to maintain material readiness and operational reliability. This is a subcontract opportunity under the NAICS code 385110, posted by the Department of Defense through its Construction & Equipment MRO SVC I contracting office. Responses are due by July 27, 2026, with the solicitation open for submission starting July 20, 2026. While no specific place of performance or point of contact is listed, the work is expected to align with DLA logistics infrastructure and procurement protocols, and all submissions must be made through the official DIBBS platform using the provided solicitation number SPE8E926Q0602.

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Metal Plate Supply and ConformanceThe contract calls for the supply of aluminum alloy plates with precise specifications: 0.250 inch thickness and dimensions of 36 by 96 inches, fully compliant with SAE AMS4016N, ASTM B209, and AMS-QQ-A-250/8C standards. Full traceability and certified documentation are required to ensure every batch meets the mandated material and quality benchmarks, with all certifications included to verify conformance. The plates must be produced and delivered under strict adherence to established aerospace and military-grade material protocols, ensuring reliability for critical applications. This is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a solicitation posted on July 20, 2026, and responses due by July 27, 2026. It falls under NAICS code 331315, indicating a focus on aluminum rolling, extruding, and drawing. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA’s DIBBS platform, and suppliers must meet stringent compliance and certification requirements to qualify for award. All deliveries must align with the contractual material standards and documentation expectations without exception.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561990
New
DIBBS
Military Marking and Barcoding ServicesThe contract requires the application of standardized military markings and barcodes in strict compliance with MIL-STD-129 to ensure proper item identification, traceability, and storage labeling for defense-related equipment and supplies. All labeling must adhere to the established military standards to support operational readiness, logistics tracking, and inventory management across the Department of Defense supply chain. The work is to be performed at the Tobyhanna location with a ZIP code of 18466-5050, and the subcontract is classified under NAICS code 561990 for other administrative and support services. Responses must be submitted by July 31, 2026, with the solicitation posted on July 20, 2026, and is open for bidding through the DIBBS platform. No set-aside provisions are specified, and the contracting activity falls under the Construction & Equipment MRO SVC I organization within the Department of Defense.
All Other Support Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and ComplianceThe contract requires the provision of hazard warning labels and Material Safety Data Sheets (MSDS) for rubber strip products, strictly in accordance with 29 CFR 1910.1200, which governs hazard communication standards. Compliance is mandatory unless the rubber strip qualifies for exemption under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), the Federal Food, Drug, and Cosmetic Act (FDCA), the Consumer Product Safety Act (CPSA), the Federal Hazardous Substances Act (FHS), or the Federal Aviation Administration (FAA) regulations. The work is structured as a subcontract under NAICS code 541690, falling under the Department of Defense’s Construction & Equipment MRO SVC I program, with performance obligations centered at Tobyhanna, Pennsylvania, zip code 18466-5050. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and all deliverables must align with U.S. regulatory requirements to ensure the safe handling, storage, and use of the rubber strip material in defense-related applications.
Other Scientific and Technical Consulting Services

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details