Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DETECTOR, RADIO FREQUEN

Active
SPE4A7-26-T-616PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 13 units of a Radio Frequency Detector identified by NSN 1430-01-211-5933, with delivery required within 171 days after order. The solicitation number is SPE4A7-26-T-616P, issued by the Defense Logistics Agency under the Department of Defense, with responsiveness due by August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, with revision control tied to the solicitation issue or award date depending on acquisition size. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting disclosure to foreign persons without authorization, and access is restricted to contractors with approved JCP certification, completed DOD export training, and DLA approval. The place of performance is New Cumberland, PA, and inquiries should be directed to Brandon Smith at the provided contact details.

General Info

Procure 13 RF detectors via DLA, deliver in 171 days, comply with MIL-STD-1916, ITAR/EAR restrictions, New Cumberland, PA performance.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336415 - Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-616P Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Brandon Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DETECTOR,RADIO FREQUENCY
1DETECTOR, RADIO FREQUENCY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1430-01-211-5933 Quantity: 13 EA Purchase Request: 7017742392QTY: 13 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336415
New
DIBBS
LINER, SEAL, PROPELLE
Solicitation # SPE7M4-26-T-299U
The contract solicits one each of two identified liner, seal, and propeller components under NSN 2010-01-515-8037, with delivery required within 20 days to two distinct U.S. Navy vessels—the USS America LHA-6 and USS Wasp LHD-1—via FOB destination terms. Both line items carry zero quantity variance and mandate compliance with MIL-STD-2073-1E packaging standards, including preservative methods, containment types, and unit packaging codes, alongside MIL-STD-129 marking requirements and DLA-specific palletization guidelines. Mercury or mercury-containing compounds are strictly prohibited in or on the supplied hardware except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Shipments must use traceable freight methods and not parcel post, with designated freight and delivery addresses provided for each recipient. The solicitation, issued under SPE7M4-26-T-299U, references DLA’s master list of technical and quality requirements, governed by revisions effective on the solicitation or award date depending on acquisition size, and incorporates specific government use codes, project identifiers, and contact information for fulfillment and tracking. Delivery deadlines are set for July 30, 2026, and August 4, 2026, respectively.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336415
New
DIBBS
ASSEMBLY, ROLLER
Solicitation # SPE4A6-26-T-12KU
The contract is for the procurement of nine units of ASSEMBLY, ROLLER with NSN 1450-01-590-3238 under solicitation SPE4A6-26-T-12KU, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 171 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. The quantity is fixed with zero variance allowed, and all items must be packaged in accordance with ASTM D3951 and fully compliant with MIL-STD-129 labeling and DLA Packaging Requirements for Procurement, with palletization adhering to RP001 standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards, and configuration changes must be managed through an Engineering Change Proposal. Sampling must follow MIL-STD-1916 or an approved zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are treated as major with zero non-conformances required in sampled lots. Compliance with CMMC Level 2 self-assessment is mandatory, and removal of government identification from non-accepted supplies is required. The unit of issue is each (EA), priced at $9.00 per unit with no price variation permitted. The original delivery deadline is June 24, 2027, though the need ship date is January 31, 2027. All items must be marked and labeled per DLA directives and delivered to the specified government receiving warehouse.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336415
New
DIBBS
HOUSING ASSEMBLY, SH
Solicitation # SPE4A5-26-T-309T
The contract solicitation SPE4A5-26-T-309T is issued by the Department of Defense’s ASC Supplier Oper OEM Division for the procurement of two Housing Assembly units, SH and CO, with a delivery requirement of 165 days ADO, targeting a need ship date of January 17, 2027, and a final delivery deadline of September 16, 2027. The place of performance is the DLA Distribution New Cumberland facility in Pennsylvania, with FOB Origin terms applying to all offers. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, superseding general standards like ASTM D3951 when applicable. Packaging and marking must strictly follow DLA Packaging Requirements RP001 and MIL-STD-129 for labeling and barcoding, including SSCCs and GS1 standards, while physical item marking is required under RQ017 despite the waiver of Item Unique Identification. Hazardous materials must be labeled per OSHA’s Hazard Communication Standard unless exempt under specific federal statutes, and accompanying safety data sheets must be provided pre-award. Cybersecurity requires a CMMC Level 2 self-assessment and adherence to NIST SP 800-171 due to the handling of Covered Defense Information. The contract mandates electronic submission via the DIBBS portal by August 4, 2026, with all post-award invoicing conducted through WAWF. Compliance with FAR and DFARS clauses is extensive, including representations of small business status, whistleblower rights, employment verification, trafficking in persons, and sustainable product requirements. Payment and administrative functions are routed through DoDAACs, with no pricing details provided in the solicitation, leaving the contract value undefined. The Government will perform final inspection and acceptance at the destination, enforcing zero non-conformance requirements under MIL-STD-1916. All contractors must provide a valid UEI and CAGE code and disclose socioeconomic status and any involvement with covered defense telecommunications equipment or services.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 336415
New
Federal
TAPE,SEALING
Solicitation # N0010426QAD04
This contract is a Small Business Set Aside total solicitation for the manufacture of TAPE, SEALING with part number TOST-436W and cage code 3Z027, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The solicitation, numbered N0010426QAD04, was posted on August 4, 2026, with a response deadline of September 3, 2026, and requires strict adherence to military standards for design, marking, and quality assurance. The item is classified as a shelf life product, and government source inspection per FAR 52.246-2 is mandatory. Delivery must be completed within 90 days, and the contract operates under FOB destination terms with payment processed through Wide Area Workflow using a combined invoice and receiving report. The contractor must comply with detailed requirements for material specifications, design changes, and part substitutions, categorized under six coded change types that dictate notification and approval procedures. All items must be marked according to applicable military standards such as MIL-STD-130 and MIL-STD-1285, and packaging must conform to MIL-STD-2073. Records of all inspections must be maintained for 365 days after final delivery, and no substitutions are permitted without prior written approval from the Contracting Officer. Commercial brand name descriptions are accepted, but alternate proposals must include full technical documentation to prove compliance. Security requirements include Cybersecurity Maturity Model Certification, National Defense Priority Rating, and restrictions under Class Deviation 2026-O0025, while compliance with Annual Representations and Certifications is mandated under deviation 2026-O0043. Contact for inquiries is Amanda R. Hayward, with email and phone details provided for administrative coordination.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 336415
New
Federal
LINING PAD, BHD
Solicitation # N0010426QAD03
This contract is for the manufacture of the LINING PAD, BHD, identified by part number 5945465-001 with cage code 53711, under a total small business set-aside solicitation numbered N0010426QAD03. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, and requires full compliance with military specifications including MIL-R-6855, ASME-Y14.5M, and MIL-DTL-31000. The item must meet exacting design standards as defined in multiple drawings and technical documentation, with drawings accessible via SAM.gov. Delivery is due within 90 days of contract issuance, and the product must have at least 85 percent of its shelf life remaining upon arrival at the first government activity, with precise marking requirements per MIL-STD-129 and MIL-STD-130. The contract mandates Government Source Inspection under FAR 52.246-2 and requires the contractor to maintain complete inspection records for 365 days after final delivery. Configuration control follows MIL-STD-973, with all engineering changes, deviations, and waivers must be formally submitted to the designated contracting officer. The contractor is responsible for ensuring all materials and processes comply with applicable military standards, including marking, packaging per MIL-STD-2073, and preservation requirements. Shelf-life items must be clearly labeled with manufacture, expiration, or test dates using the specified numeric month and two-digit year format, and shipping containers must reflect the earliest date among identical units. Security and cyber maturity requirements are enforced under recent DOD deviations, and the delivery must meet priority rating classifications for national defense. All contractual documents are considered officially issued upon electronic transmission or mailing, and acceptance of the proposal forms a binding agreement. Payment and logistics are managed via Wide Area Workflow, with inspection and acceptance occurring at the source, and all document references must be obtained from DODSSP or designated government offices. This solicitation is strictly for small business concerns, and unauthorized disclosure of proprietary or NOFORN information is prohibited.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 336415
New
DIBBS
RF Power Divider Manufacturing & AssemblyThe contract is for the manufacture and delivery of three RF power dividers meeting the National Stock Number NSN 5895012201810, with strict compliance required for quality, labeling, and packaging standards as defined by military specifications. All components must be fully assembled and tested to ensure functionality and reliability under operational conditions, with documentation to verify conformance throughout the production lifecycle. The work is restricted to small businesses under a Total Small Business Set-Aside designation, aligned with SBA regulations and the NAICS code 336415 for other communications equipment manufacturing. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the finished products must be delivered or where final assembly and testing will occur. The solicitation was posted on August 3, 2026, and responses are due by August 11, 2026, with the contract structured as a subcontract under the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV. The procurement is accessible via the DIBBS portal for interested small businesses to review requirements and submit proposals.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 336415
New
DIBBS
TRAVEL LOCK ASSEMBL
Solicitation # SPE4A6-26-T-11NL
The contract pertains to the procurement of three Travel Lock Assemblies for Rocket applications, identified by NSN 1440-01-281-2368, with a delivery requirement of 20 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated web portal, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to DLA packaging standards, tailored higher-level quality requirements for both manufacturers and non-manufacturers, and inspection and acceptance at the origin. Government identification must be removed from non-accepted supplies, and bare items must be physically marked according to specified guidelines. While Item Unique Identification is not required, DFARS 252.211-7003(c)(1)(i) governs this exclusion. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based foreign nationals, and requires compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and formal DLA authorization. The solicitation number is SPE4A6-26-T-11NL, with a response deadline of August 11, 2026, issued under NAICS code 336415 by the Department of Defense’s ASC Commodities Division, with Mellisa Heise as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 336415
New
DIBBS
SAFETYNET
Solicitation # SPE4A7-26-T-383A
The contract pertains to the procurement of one unit of SafetyNet, identified by NSN 1450-01-588-5851, under solicitation SPE4A7-26-T-383A, with a response deadline of August 6, 2026, and an anticipated delivery date 171 days after award. The requirement is governed by DLA packaging standards and incorporates technical and quality specifications from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Technical data for this item is not publicly available due to proprietary or insufficient information, limiting competitive bidding. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless另有规定, and attributes must be classified with specified verification levels or AQLs. The manufacturer may choose attribute or variable inspection methods unless contractually restricted. MIL-STD-105/ASQ Z1.4 may be used to determine sample size but not for acceptance criteria. The item is to be delivered to Hill AFB, Utah, and the contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with Lexus Henry as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 336415
New
DIBBS
DIVIDER, POWER, RADIO FR
Solicitation # SPE4A7-26-T-607E
The contract specifies the procurement of a Radio Frequency Power Divider, identified by NSN 5895012201810 and part number 7017697920, with a total quantity of three units to be delivered FOB origin within 524 days. The item must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with acceptance criteria tied to MIL-STD-1916 or comparable zero-based sampling plans, assigning verification levels or AQLs based on attribute criticality. Inspection and acceptance occur at the manufacturer’s origin, and packaging must conform to MIL-STD-2073-1E with marking per MIL-STD-129, including specific packaging codes and palletization under DLA packaging guidelines. Cybersecurity compliance is mandated through CMMC Level 2 self-assessment, and the supplier must meet all applicable defense information handling protocols. A separate first article test line item is included with a unit quantity of one, indicating the government’s requirement for performance validation; failure to quote a price for this item will result in no separate charge being assumed, and the line item may be voided if the test is waived. The solicitation is a total small business set-aside under NAICS code 336415, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation governed by DLA procedural notes. The contract emphasizes strict adherence to document revisions, zero variance in quantity, and full compliance with government-specified standards without exception.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 336415
New
DIBBS
F00T, EJECTOR, FW
Solicitation # SPE4A0-26-T-4133
The contract pertains to the procurement of a Forward Ejector Foot, designated Part Number 68A733218-1007 with NSN 1440-01-453-4234, under solicitation SPE4A0-26-T-4133. Eight units are required at a unit price of $8.00, with delivery mandated within five days FOB origin. The item must be manufactured using a forging process, necessitating specific tooling and sourcing coordination through designated DLA supply chain teams for Aviation or Land & Maritime systems. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization adhering to DLA packaging standards. Acceptance occurs at origin with zero tolerance for non-conformances under sampling rules aligned with MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II to critical, major, and minor attributes respectively. ISO 9001:2015 quality management certification is required for both manufacturers and non-manufacturers, and government identification must be removed from non-accepted supplies. Unit of issue is EA, and Item Unique Identification is not mandated per customer request under DFARS 252.211-7003. All measurements and testing equipment must meet applicable standards, and the contract is administered by the DLA Aviation Supply Chain ESOC Buy office with Danita Davis as the primary point of contact.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 336415
New
DIBBS
OIL TRANSFER ASSEMB
Solicitation # SPE4A5-26-T-318N
The contract pertains to the procurement of an Oil Transfer Assembly identified by NSN 2010-01-253-2060 and part number 694002001, supplied by GE Aviation Systems LLC, categorized as a critical application item. The requirement is for three units, with delivery scheduled 463 days from the contract award under FOB origin terms, and both inspection and acceptance occurring at the destination. Strict packaging standards mandate compliance with MIL-STD-2073-1E and MIL-STD-129 for labeling and marking, with no special marking required. Packaging must adhere to DLA’s procurement guidelines, including use of specific preservation methods, cushioning materials, and unit containers. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lamps, or weapon systems, which must include secondary containment and meet NAVSEA 5100-003D specifications. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLA procedural notes. The solicitation was issued under contract number SPE4A5-26-T-318N with a response deadline in August 2026 and a required ship date of November 17, 2027. All technical and quality requirements referenced via R and I numbers are derived from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 336415
New
DIBBS
GEARSHAFT ASSEMBLY
Solicitation # SPE7M0-26-T-024T
The contract pertains to the procurement of a Gearshaft Assembly, identified by NSN 2010-01-065-5252 and part number 46296E290, supplied by TIMKEN GEARS & SERVICES INC., with a required quantity of five units to be delivered within five days of contract award. Delivery is to be FOB origin, with inspection and acceptance also occurring at the origin point, and no variance in quantity is permitted. Packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and container types, with marking adhering to MIL-STD-129 and no special marking required. Palletization must conform to DLA standards, and the shipment is destined for the General Depot of Naval Supplies in Kaohsiung, Taiwan. The contract incorporates technical and quality requirements from the DLA Master List, and cybersecurity compliance mandates a CMMC Level 2 self-assessment. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted, such as in specified batteries, lighting, instruments, or weapon systems, and any exempted items must include secondary containment. The item is designated as a critical application item, underscoring its essential operational role. The contract is issued under solicitation SPE7M0-26-T-024T with a response deadline of August 10, 2026, and a required delivery date of July 21, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

6 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 326199
New
DIBBS
Supply of Cushioning Pads (NSN: 1680016028732)
All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
Supply of Insulating Cover Blanket (NSN: 1660-01-472-5136)The contract calls for the supply of 306 new and unused insulating cover blankets identified by NSN 1660-01-472-5136, all of which must comply with military specifications to ensure functional integrity and safety. These blankets are critical components intended for operational use where thermal protection and reliability are non-negotiable, and the requirement emphasizes that no used, refurbished, or non-conforming items will be accepted. The solicitation is categorized as a subcontract under NAICS code 335999, indicating it falls within other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The opportunity was posted on August 5, 2026, with a firm response deadline of August 11, 2026, leaving a six-day window for qualified suppliers to submit proposals. While the place of performance and point of contact details are unspecified, the transaction is facilitated through the DIBBS system, and vendors must ensure full adherence to military standards and delivery timelines to meet contractual obligations.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-Q-0974
The contract pertains to the procurement of seven units of a machine thread plug with NSN 5365-00-854-2899, issued under solicitation number SPE4A7-26-Q-0974 by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 182 days after contract award, and responses must be submitted by August 15, 2026. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA training and approved access, are permitted to receive the technical data. The primary point of contact for the solicitation is Mykhara Robinson, reachable via email at mykhara.robinson@dla.mil.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-T-617T
The contract pertains to the procurement of one aircraft skin identified by NSN 1560-01-366-4266, with a delivery requirement of 142 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent documentation and compliance requirements including source approval submission, DLA packaging standards, and cybersecurity maturity model certification level 2 by a certified third-party assessment organization. Configuration changes require formal engineering change proposals for any deviations or waivers. Inspection and acceptance must occur at the manufacturer’s origin, and non-accepted items must have all government identification removed. Components are governed by Qualified Products Lists or Qualified Manufacturers Lists as defined in procurement note H02, and physical marking of the bare item is mandatory. While unique identification is not required per the service customer’s request, export control restrictions apply to associated technical data under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including employees of U.S. companies abroad. Distribution of such data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, confirmed training completion, and formal DLA authorization. The contract falls under solicitation SPE4A7-26-T-617T, issued by the Department of Defense through the ASC Supplier Operation AE and AF Division, with performance at Tinker AFB and a response deadline of August 13, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-617P
The contract is for the procurement of 77 units of a SPACER, PLATE with NSN/Part Number 5365-00-768-1020 under solicitation SPE4A7-26-T-617P, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 233 days from award, with performance taking place in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is classified under NAICS code 332510. This item is subject to a comprehensive set of technical, quality, and compliance requirements defined by the DLA Master List of Technical and Quality Requirements, including specific clauses such as RD002 on Covered Defense Information, RQ017 on physical identification and bare item marking, and RQ032 on export control. Technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons both within and outside the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Packaging, government identification removal, and cybersecurity compliance including CMMC Level 2 certification for third-party assessors are also mandatory.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER, INNER SHOC
Solicitation # SPE4A7-26-R-X998
The contract solicitation SPE4A7-26-R-X998 is for one unit of CYLINDER, INNER SHOCK ABSORBER, BOOM STOWAGE with NSN 1680-00-672-8041, under a Total Small Business Set-Aside for NAICS code 333995, with a maximum estimated contract value of $349,999.99 and a delivery window of 365 days after award. The procurement is governed by a trade-off evaluation approach where past performance, particularly SPRS assessments, historical quality, and delivery schedule compliance, holds the highest weighting, followed by cost or price and other non-price factors. All supplies must comply with stringent packaging and marking standards including MIL-STD-129 for external labeling and barcoding, ASTM D3951 for packaging, and DLA’s RP001 packaging requirements. The inspection and acceptance process occurs at the origin, with the Government retaining final authority to accept or reject items based on ISO 9001:2015, MIL-STD-1916, and the DLA Master List of Technical and Quality Requirements. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, and distribution is restricted to contractors with approved JCP certification, completed DLA export control training, and DLA access approval. Item Unique Identification is not required per customer request. The contract incorporates multiple FAR and DFARS clauses governing cybersecurity, including DFARS 252.204-7012 for safeguarding covered defense information and CMMC Level 2 certification requirements, as well as compliance with NIST SP 800-171 through clause 252.240-7997. The contractor must also adhere to provisions on combating trafficking, equal opportunity, labor rights, environmental protections including prohibitions on hexavalent chromium and toxic materials, and Buy American requirements under Alternate II. Payment must be submitted exclusively through WAWF, and performance is subject to FOB destination terms where the contractor bears transportation risk until delivery at the specified destination. The solicitation closes August 16, 2026, and must be submitted through DIBBS or email to Lamar Olivier, with no options, a five-year base period, and minimum and maximum annual order quantities of 10 and
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLEVIS
Solicitation # SPE4A7-26-T-617Y
The contract is for the procurement of 1,429 units of BOLT, CLEVIS with NSN 5306-00-151-3538 under solicitation SPE4A7-26-T-617Y, issued by the Department of Defense through ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 170 days of award, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, with no tolerance for quantity variance. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards, and packaging must adhere to ASTM D3951 as well as MIL-STD-129 for marking and labeling. Palletization must meet DLA Packaging Requirements, and government identification must be removed from non-accepted items. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with verification levels or AQLs assigned based on attribute criticality, and zero non-conformances required unless otherwise specified. Identification markings must conform to MIL-STD-130N in addition to manufacturer-specific data. The required delivery date is March 25, 2027, with a need ship date of January 31, 2027, and the contract references specific DLA transportation procedures for shipping and first destination handling.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PIVOT BLOCK ASSY, LA
Solicitation # SPE4A7-26-T-618N
The contract is for the procurement of 22 units of a Pivot Block Assembly with NSN 1560-01-165-5479 under solicitation SPE4A7-26-T-618N, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. Delivery is required within 79 days after award, with the place of performance located in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. This item contains technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, or to foreign subsidiaries requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only DLA contractors with approved JCP certification, completion of mandatory DOD export control training, and approval from DLA authorities are permitted to access the technical data. The NAICS code is 336413, and all distribution must comply fully with DLA packaging and export control requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DUCT ASSEMBLY, AIR C
Solicitation # SPE4A7-26-T-618E
This contract pertains to the procurement of a duct assembly for air conditioning-heating systems, identified by part number 4A92040-103A and NSN 1660008833626, with a required quantity of five units. The item is source-controlled and must be manufactured and tested in strict accordance with limited rights data held by Lockheed Martin Corporation and sourced exclusively from Arrowhead Products Corporation, with no alternative suppliers permitted unless an approved source approval request is submitted and granted. Technical and quality requirements are governed entirely by the DLA Master List of Technical and Quality Requirements, with specific protocols for inspection, testing, and documentation, including the use of zero-defect sampling under MIL-STD-1916 or ASQ H1331, and mandatory adherence to verification levels and AQLs for critical, major, and minor attributes. All items must be inspected and accepted at origin, with no tolerance for quantity variance, and must be packaged in compliance with ASTM D3951 and MIL-STD-129, as superseded by DLA packaging standards, with palletization following RP001 guidelines. The item is designated as a critical application and requires physical identification and labeling per RQ017. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. The delivery is FOB origin with a 473-day lead time, and the required delivery date is January 12, 2028, with a need ship date of November 30, 2027. The contract designates Robins Air Force Base, Georgia as the sole delivery point, and unit price is set at $5.00 per unit. Government identification must be removed from non-accepted supplies, and item unique identification is waived per customer request.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336414
New
DIBBS
FAIRING, LAUNCHER, GUIDED MISSILE AIRCRAFT
Solicitation # SPE4A7-26-R-X989
The contract is for the procurement of one FAIRING, LAUNCHER, GUIDED MISSILE AIRCRAFT, identified by NSN 1440-01-073-2293 and part number 16S307-1, Revision K, with technical data tied to Lockheed Martin Corporation and Alek Industries Inc. The solicitation, issued under number SPE4A7-26-R-X989, is a total small business set-aside under NAICS code 336414, with a ceiling value of $349,999.99 and a delivery deadline of 230 days ADO to an unspecified destination under FOB DESTINATION terms. Performance is governed by stringent defense procurement standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with specific requirements for bare item labeling, preservation, and external container markings indicating “Product Verification Test Samples - Do Not Post to Stock” alongside contract and lot numbers. Technical data is subject to export controls under ITAR or EAR, restricting access to DLA contractors with approved JCP certification, completed export control training, and DLA authorization. Cybersecurity compliance is mandated at CMMC Level 2, and the contractor must adhere to DFARS and FAR requirements including safeguarding covered defense information, combating trafficking, equal opportunity, paid sick leave, and employment eligibility verification. The contract includes comprehensive quality and inspection protocols requiring acceptance at destination per FAR 52.246-2, with inspections governed by MIL-STD-1916 and quality assurance provisions. Invoicing is exclusively through the Wide Area WorkFlow (WAWF) system, with no alternative methods permitted, and payments are routed through designated DoDAACs. The evaluation process prioritizes past performance, especially supplier quality and delivery reliability, over cost, with a trade-off approach used to determine best value. Offerors must maintain current SAM registrations, submit UEI and CAGE codes, and represent their small business status accurately, with additional disclosures required if providing covered defense telecommunications equipment. Special contract requirements authorize DPAS priority ratings, mandate U.S.-flag vessels for ocean shipments unless waived, and impose strict labeling of hazardous and radioactive materials. Technical data submissions for alternative products must include traceability documentation, and any configuration changes require formal engineering change proposals. No formal list of attachments is provided, and specific pricing, point-of-contact, COR/COT
Guided Missile and Space Vehicle Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
PLATE, TEMPETURE IND
Solicitation # SPE4A7-26-R-XA01
The contract is for a single unit of a temperature indicator plate, identified by NSN 1650-01-034-8563 and part number 240-180F, procured under solicitation SPE4A7-26-R-XA01 as a total small business set-aside. Delivery is due within 75 days after date of order, with FOB destination terms applying, and the contract uses a firm fixed price with zero variance permitted. Inspection and acceptance both occur at origin, governed by MIL-STD-1916 or ASQ H1331 sampling standards requiring zero nonconformances in the sample lot unless otherwise specified; unspecified attributes are treated as major. The contractor must comply with all DLA Master List of Technical and Quality Requirements, including RQ001 for tailored quality requirements, RQ009 for inspection at origin, RQ011 for removal of government identification from non-accepted items, RQ017 for physical marking, and RT001 for calibrated test equipment. Packaging must meet ASTM D3951 standards unless superseded by DLA requirements, and all items must be labeled and palletized per MIL-STD-129 and RP001, including mandatory markings such as “Product Verification Test Samples – Do Not Post to Stock,” contract number, and lot/item number. The item is classified as a critical application item and is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. The contract incorporates numerous FAR and DFARS clauses, including those on small business representation, child labor, equal opportunity, termination for convenience, default, and prohibition on contracting with inverted domestic corporations, all of which contain deviations authorized under 2026-00038. Invoicing is mandatory through the Wide Area WorkFlow system, and the contractor must maintain compliance with traceability, obsolescence management, and hazardous materials labeling (29 CFR 1910.1200). Payment, delivery, and performance are tied to the DLA’s supply chain protocols, with quality oversight conducted by government inspection authorities and technical compliance governed by precedence of contract-specific requirements over general standards.

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details